Lastest & Cheapest ISO Standards In PDF (44)

http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.


ISO/CD 28927-11
Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 11: Stone hammers 30.60 TC 118/SC 3

13.180 Ergonomics
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 1503:2008
Spatial orientation and direction of movement -- Ergonomic requirements 60.60 TC 159/SC 4
ISO 6385:2004
Ergonomic principles in the design of work systems 90.93 TC 159/SC 1
ISO 7243:1989
Hot environments -- Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) 90.93 TC 159/SC 5
ISO 7250-1:2008
Basic human body measurements for technological design -- Part 1: Body measurement definitions and landmarks 60.60 TC 159/SC 3
ISO/CD TR 7250-2
Basic human body measurements for technological design -- Part 2: Statistical summaries of body measurements from individual ISO populations 30.60 TC 159/SC 3
ISO 7726:1998
Ergonomics of the thermal environment -- Instruments for measuring physical quantities 90.93 TC 159/SC 5
ISO 7730:2005
Ergonomics of the thermal environment -- Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria 90.93 TC 159/SC 5
ISO 7731:2003
Ergonomics -- Danger signals for public and work areas -- Auditory danger signals 90.93 TC 159/SC 5
ISO 7933:2004
Ergonomics of the thermal environment -- Analytical determination and interpretation of heat stress using calculation of the predicted heat strain 90.60 TC 159/SC 5
ISO/CIE 8995-1:2002/Cor 1:2005
60.60 CIE
ISO/CIE 8995-1:2002
Lighting of work places -- Part 1: Indoor 90.60 CIE
ISO/FDIS 8995-2
Lighting of work places -- Part 2: Outdoor 50.92 CIE
ISO/CIE 8995-3:2006
Lighting of work places -- Part 3: Lighting requirements for safety and security of outdoor work places 60.60 CIE
ISO 8996:2004
Ergonomics of the thermal environment -- Determination of metabolic rate 90.60 TC 159/SC 5
ISO 9241-1:1997
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 1: General introduction 90.60 TC 159/SC 4
ISO 9241-1:1997/Amd 1:2001
60.60 TC 159/SC 4
ISO 9241-2:1992
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 2: Guidance on task requirements 90.93 TC 159/SC 4
ISO 9241-4:1998
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 4: Keyboard requirements 90.93 TC 159/SC 4
ISO 9241-4:1998/Cor 1:2000
60.60 TC 159/SC 4
ISO 9241-5:1998
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 5: Workstation layout and postural requirements 90.93 TC 159/SC 4
ISO 9241-6:1999
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 6: Guidance on the work environment 90.20 TC 159/SC 4
ISO 9241-9:2000
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 9: Requirements for non-keyboard input devices 90.93 TC 159/SC 4
ISO 9241-11:1998
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 11: Guidance on usability 90.93 TC 159/SC 4
ISO 9241-12:1998
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 12: Presentation of information 90.93 TC 159/SC 4
ISO 9241-13:1998
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 13: User guidance 90.93 TC 159/SC 4
ISO 9241-14:1997
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 14: Menu dialogues 90.93 TC 159/SC 4
ISO 9241-15:1997
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 15: Command dialogues 90.93 TC 159/SC 4
ISO 9241-16:1999
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 16: Direct manipulation dialogues 90.20 TC 159/SC 4
ISO 9241-17:1998
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 17: Form filling dialogues 90.93 TC 159/SC 4
ISO 9241-20:2008
Ergonomics of human-system interaction -- Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services 60.60 TC 159/SC 4
ISO/CD TR 9241-100
Ergonomics of human-system interaction -- Part 100: Introduction to standards related to software ergonomics 30.99 TC 159/SC 4
ISO 9241-110:2006
Ergonomics of human-system interaction -- Part 110: Dialogue principles 90.20 TC 159/SC 4
ISO/DIS 9241-129
Ergonomics of human-system interaction -- Part 129: Guidance on individualization 40.20 TC 159/SC 4
ISO/AWI 9241-143
Ergonomics of human-system interaction -- Part 143: Forms-based dialogues 20.00 TC 159/SC 4
ISO 9241-151:2008
Ergonomics of human-system interaction -- Part 151: Guidance on World Wide Web user interfaces 60.60 TC 159/SC 4
ISO/AWI 9241-154
Ergonomics of human-system interaction -- Part 154: Design guidance for interactive voice response (IVR) applications 20.00 TC 159/SC 4
ISO 9241-171:2008
Ergonomics of human-system interaction -- Part 171: Guidance on software accessibility 60.60 TC 159/SC 4
ISO/DIS 9241-210
Ergonomics of human-system interaction -- Part 210: Human-centred design for interactive systems 40.60 TC 159/SC 4
ISO 9241-300:2008
Ergonomics of human-system interaction -- Part 300: Introduction to electronic visual display requirements 60.60 TC 159/SC 4
ISO 9241-302:2008
Ergonomics of human-system interaction -- Part 302: Terminology for electronic visual displays 60.60 TC 159/SC 4
ISO 9241-303:2008
Ergonomics of human-system interaction -- Part 303: Requirements for electronic visual displays 60.60 TC 159/SC 4
ISO 9241-304:2008
Ergonomics of human-system interaction -- Part 304: User performance test methods for electronic visual displays 60.60 TC 159/SC 4
ISO 9241-305:2008
Ergonomics of human-system interaction -- Part 305: Optical laboratory test methods for electronic visual displays 60.60 TC 159/SC 4
ISO 9241-306:2008
Ergonomics of human-system interaction -- Part 306: Field assessment methods for electronic visual displays 60.60 TC 159/SC 4
ISO 9241-307:2008
Ergonomics of human-system interaction -- Part 307: Analysis and compliance test methods for electronic visual displays 60.60 TC 159/SC 4
ISO/TR 9241-308:2008
Ergonomics of human-system interaction -- Part 308: Surface-conduction electron-emitter displays (SED) 60.60 TC 159/SC 4
ISO/TR 9241-309:2008
Ergonomics of human-system interaction -- Part 309: Organic light-emitting diode (OLED) displays 60.60 TC 159/SC 4
ISO/NP TR 9241-310
Ergonomics of human-system interaction -- Part 310: Pixel defects -Visibility, aestetics and ergonomics 10.99 TC 159/SC 4
ISO 9241-400:2007
Ergonomics of human--system interaction -- Part 400: Principles and requirements for physical input devices 60.60 TC 159/SC 4
ISO 9241-410:2008
Ergonomics of human-system interaction -- Part 410: Design criteria for physical input devices 60.60 TC 159/SC 4
ISO/CD 9241-420
Ergonomics of human-system interaction -- Part 420: Selection procedures for physical input devices 30.99 TC 159/SC 4
ISO/CD 9241-910
Ergonomics of human-system interaction -- Part 910: Framework for tactile and haptic interaction 30.60 TC 159/SC 4
ISO 9241-920:2009
Ergonomics of human-system interaction -- Part 920: Guidance on tactile and haptic interactions 60.60 TC 159/SC 4
ISO 9355-1:1999
Ergonomic requirements for the design of displays and control actuators -- Part 1: Human interactions with displays and control actuators 90.20 TC 159/SC 4
ISO 9355-2:1999
Ergonomic requirements for the design of displays and control actuators -- Part 2: Displays 90.20 TC 159/SC 4
ISO 9355-3:2006
Ergonomic requirements for the design of displays and control actuators -- Part 3: Control actuators 60.60 TC 159/SC 4
ISO 9886:2004
Ergonomics -- Evaluation of thermal strain by physiological measurements 90.93 TC 159/SC 5
ISO 9920:2007
Ergonomics of the thermal environment -- Estimation of thermal insulation and water vapour resistance of a clothing ensemble 60.60 TC 159/SC 5
ISO 9921:2003
Ergonomics -- Assessment of speech communication 90.93 TC 159/SC 5
ISO 10075:1991
Ergonomic principles related to mental work-load -- General terms and definitions 90.93 TC 159/SC 1
ISO 10075-2:1996
Ergonomic principles related to mental workload -- Part 2: Design principles 90.60 TC 159/SC 1
ISO 10075-3:2004
Ergonomic principles related to mental workload -- Part 3: Principles and requirements concerning methods for measuring and assessing mental workload 90.60 TC 159/SC 1
ISO 10551:1995
Ergonomics of the thermal environment -- Assessment of the influence of the thermal environment using subjective judgement scales 90.93 TC 159/SC 5
ISO 11064-1:2000
Ergonomic design of control centres -- Part 1: Principles for the design of control centres 90.93 TC 159/SC 4
ISO 11064-2:2000
Ergonomic design of control centres -- Part 2: Principles for the arrangement of control suites 90.93 TC 159/SC 4
ISO 11064-3:1999
Ergonomic design of control centres -- Part 3: Control room layout 90.20 TC 159/SC 4
ISO 11064-3:1999/Cor 1:2002
60.60 TC 159/SC 4
ISO 11064-4:2004
Ergonomic design of control centres -- Part 4: Layout and dimensions of workstations 90.92 TC 159/SC 4
ISO 11064-5:2008
Ergonomic design of control centres -- Part 5: Displays and controls 60.60 TC 159/SC 4
ISO 11064-6:2005
Ergonomic design of control centres -- Part 6: Environmental requirements for control centres 90.93 TC 159/SC 4
ISO 11064-7:2006
Ergonomic design of control centres -- Part 7: Principles for the evaluation of control centres 90.20 TC 159/SC 4
ISO 11079:2007
Ergonomics of the thermal environment -- Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects 60.60 TC 159/SC 5
ISO 11226:2000
Ergonomics -- Evaluation of static working postures 90.93 TC 159/SC 3
ISO 11226:2000/Cor 1:2006
60.60 TC 159/SC 3
ISO 11228-1:2003
Ergonomics -- Manual handling -- Part 1: Lifting and carrying 90.93 TC 159/SC 3
ISO 11228-2:2007
Ergonomics -- Manual handling -- Part 2: Pushing and pulling 60.60 TC 159/SC 3
ISO 11228-3:2007
Ergonomics -- Manual handling -- Part 3: Handling of low loads at high frequency 60.60 TC 159/SC 3
ISO 11399:1995
Ergonomics of the thermal environment -- Principles and application of relevant International Standards 90.93 TC 159/SC 5
ISO 11428:1996
Ergonomics -- Visual danger signals -- General requirements, design and testing 90.93 TC 159/SC 5
ISO 11429:1996
Ergonomics -- System of auditory and visual danger and information signals 90.93 TC 159/SC 5
ISO/NP TR 12295
Ergonomics -- Application document for ISO standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) and working postures (ISO 11226) 10.99 TC 159/SC 3
ISO/NP TR 12296
Ergonomics -- Manual handling of people in the healthcare sector 10.99 TC 159/SC 3
ISO 12894:2001
Ergonomics of the thermal environment -- Medical supervision of individuals exposed to extreme hot or cold environments 90.93 TC 159/SC 5
ISO 13407:1999
Human-centred design processes for interactive systems 90.20 TC 159/SC 4
ISO 13731:2001
Ergonomics of the thermal environment -- Vocabulary and symbols 90.60 TC 159/SC 5
ISO 13732-1:2006
Ergonomics of the thermal environment -- Methods for the assessment of human responses to contact with surfaces -- Part 1: Hot surfaces 60.60 TC 159/SC 5
ISO/TS 13732-2:2001
Ergonomics of the thermal environment -- Methods for the assessment of human responses to contact with surfaces -- Part 2: Human contact with surfaces at moderate temperature 90.93 TC 159/SC 5
ISO 13732-3:2005
Ergonomics of the thermal environment -- Methods for the assessment of human responses to contact with surfaces -- Part 3: Cold surfaces 90.93 TC 159/SC 5
ISO/TS 14415:2005
Ergonomics of the thermal environment -- Application of International Standards to people with special requirements 90.93 TC 159/SC 5
ISO/TS 14505-1:2007
Ergonomics of the thermal environment -- Evaluation of thermal environments in vehicles -- Part 1: Principles and methods for assessment of thermal stress 60.60 TC 159/SC 5
ISO 14505-2:2006
Ergonomics of the thermal environment -- Evaluation of thermal environments in vehicles -- Part 2: Determination of equivalent temperature 60.60 TC 159/SC 5
ISO 14505-2:2006/Cor 1:2007
60.60 TC 159/SC 5
ISO 14505-3:2006
Ergonomics of the thermal environment -- Evaluation of thermal environments in vehicles -- Part 3: Evaluation of thermal comfort using human subjects 90.20 TC 159/SC 5
ISO 14738:2002
Safety of machinery -- Anthropometric requirements for the design of workstations at machinery 90.93 TC 159/SC 3
ISO 14738:2002/Cor 1:2003
60.60 TC 159/SC 3
ISO 14738:2002/Cor 2:2005
. 60.60 TC 159/SC 3
ISO 14915-1:2002
Software ergonomics for multimedia user interfaces -- Part 1: Design principles and framework 90.93 TC 159/SC 4
ISO 14915-2:2003
Software ergonomics for multimedia user interfaces -- Part 2: Multimedia navigation and control 90.60 TC 159/SC 4
ISO 14915-3:2002
Software ergonomics for multimedia user interfaces -- Part 3: Media selection and combination 90.93 TC 159/SC 4
ISO 15005:2002
Road vehicles -- Ergonomic aspects of transport information and control systems -- Dialogue management principles and compliance procedures 90.60 TC 22/SC 13
ISO 15007-1:2002
Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 1: Definitions and parameters 90.60 TC 22/SC 13
ISO/TS 15007-2:2001
Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 2: Equipment and procedures 90.93 TC 22/SC 13
ISO 15008:2009
Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications and test procedures for in-vehicle visual presentation 60.60 TC 22/SC 13
ISO 15265:2004
Ergonomics of the thermal environment -- Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions 90.60 TC 159/SC 5
ISO 15534-1:2000
Ergonomic design for the safety of machinery -- Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery 90.93 TC 159/SC 3
ISO 15534-2:2000
Ergonomic design for the safety of machinery -- Part 2: Principles for determining the dimensions required for access openings 90.93 TC 159/SC 3
ISO 15534-3:2000
Ergonomic design for the safety of machinery -- Part 3: Anthropometric data 90.93 TC 159/SC 3
ISO 15535:2006
General requirements for establishing anthropometric databases 60.60 TC 159/SC 3
ISO 15536-1:2005
Ergonomics -- Computer manikins and body templates -- Part 1: General requirements 90.93 TC 159/SC 3
ISO 15536-2:2007
Ergonomics -- Computer manikins and body templates -- Part 2: Verification of functions and validation of dimensions for computer manikin systems 60.60 TC 159/SC 3
ISO 15537:2004
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs 90.93 TC 159/SC 3
ISO 15743:2008
Ergonomics of the thermal environment -- Cold workplaces -- Risk assessment and management 60.60 TC 159/SC 5
ISO 16121-1:2005
Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 1: General description, basic requirements 90.60 TC 22/SC 13
ISO 16121-2:2005
Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 2: Visibility 90.60 TC 22/SC 13
ISO 16121-3:2005
Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 3: Information devices and controls 90.60 TC 22/SC 13
ISO 16121-4:2005
Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 4: Cabin environment 90.60 TC 22/SC 13
ISO/TR 16352:2005
Road vehicles -- Ergonomic aspects of in-vehicle presentation for transport information and control systems -- Warning systems 60.60 TC 22/SC 13
ISO 16673:2007
Road vehicles -- Ergonomic aspects of transport information and control systems -- Occlusion method to assess visual demand due to the use of in-vehicle systems 60.60 TC 22/SC 13
ISO/TS 16951:2004
Road vehicles -- Ergonomic aspects of transport information and control systems (TICS) -- Procedures for determining priority of on-board messages presented to drivers 90.60 TC 22/SC 13
ISO/TR 16982:2002
Ergonomics of human-system interaction -- Usability methods supporting human-centred design 90.93 TC 159/SC 4
ISO 17287:2003
Road vehicles -- Ergonomic aspects of transport information and control systems -- Procedure for assessing suitability for use while driving 90.60 TC 22/SC 13
ISO/PAS 18152:2003
Ergonomics of human-system interaction -- Specification for the process assessment of human-system issues 90.93 TC 159/SC 4
ISO/TR 18529:2000
Ergonomics -- Ergonomics of human-system interaction -- Human-centred lifecycle process descriptions 90.93 TC 159/SC 4
ISO/TR 19358:2002
Ergonomics -- Construction and application of tests for speech technology 90.93 TC 159/SC 5
ISO 20282-1:2006
Ease of operation of everyday products -- Part 1: Design requirements for context of use and user characteristics 60.60 TC 159/SC 1
ISO/TS 20282-2:2006
Ease of operation of everyday products -- Part 2: Test method for walk-up-and-use products 60.60 TC 159/SC 1
ISO/PAS 20282-3:2007
Ease of operation of everyday products -- Part 3: Test method for consumer products 90.92 TC 159/SC 1
ISO/NP TS 20282-3
Ease of operation of everyday products -- Part 3: Test method for consumer products 10.99 TC 159/SC 4
ISO/PAS 20282-4:2007
Ease of operation of everyday products -- Part 4: Test method for the installation of consumer products 60.60 TC 159/SC 1
ISO/TS 20646-1:2004
Ergonomic procedures for the improvement of local muscular workloads -- Part 1: Guidelines for reducing local muscular workloads 90.93 TC 159/SC 3
ISO 20685:2005
3-D scanning methodologies for internationally compatible anthropometric databases 90.60 TC 159/SC 3
ISO/DIS 24500
Ergonomics -- Accessible design -- Auditory signals for consumer products 40.20 TC 159/SC 5
ISO/DIS 24501
Ergonomics -- Accessible design -- Sound pressure levels of auditory signals for consumer products 40.20 TC 159/SC 5
ISO/CD 24502
Ergonomics -- Accessible design -- Specification of age-related relative luminance in visual signs and displays 30.99 TC 159/SC 5
ISO/CD 24503
Ergonomics -- Accessible design -- Using tactile dots and bars on consumer products 30.99 TC 159/SC 4
ISO/DIS 26022
Road vehicles -- Ergonomic aspects of transport information and control systems -- Simulated lane change test to assess in-vehicle secondary task demand 40.93 TC 22/SC 13
ISO/CD 26800
Ergonomics -- Principles and concepts 30.20 TC 159/SC 1
ISO/CD 28802
Ergonomics of the physical environment -- The assessment of environments by means of an environmental survey involoving physical measurements of the environment and subjective responses of people 30.99 TC 159/SC 5
ISO/CD 28803
Ergonomics of the physical environment -- Application of international standards to people with special requirements 30.99 TC 159/SC 5

13.200 Accident and disaster control
Including emergency evacuations and emergency control systems
Seismic and vibration protection of buildings, see 91.120.25
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
0IWA 5:2006
Emergency preparedness 60.60 TMB

From WWW.nan-long.com


13.220 Protection against fire
ICS Field
13.220.01 Protection against fire in general
Including fire safety
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 3941:2007
Classification of fires 60.60 TC 21/SC 2
ISO 6309:1987
Fire protection -- Safety signs 90.93 TC 21
ISO 6790:1986
Equipment for fire protection and fire fighting -- Graphical symbols for fire protection plans -- Specification 90.93 TC 21
ISO/TR 7248:1985
Fire data -- Collection and presentation system 90.93 TC 38
ISO 8421-1:1987
Fire protection -- Vocabulary -- Part 1: General terms and phenomena of fire 90.93 TC 21
ISO 8421-2:1987
Fire protection -- Vocabulary -- Part 2: Structural fire protection 90.93 TC 21
ISO 8421-3:1989
Fire protection -- Vocabulary -- Part 3: Fire detection and alarm 90.93 TC 21
ISO 8421-4:1990
Fire protection -- Vocabulary -- Part 4: Fire extinction equipment 90.93 TC 21
ISO 8421-5:1988
Fire protection -- Vocabulary -- Part 5: Smoke control 90.93 TC 21
ISO 8421-6:1987
Fire protection -- Vocabulary -- Part 6: Evacuation and means of escape 90.93 TC 21
ISO 8421-7:1987
Fire protection -- Vocabulary -- Part 7: Explosion detection and suppression means 90.93 TC 21
ISO 8421-8:1990
Fire protection -- Vocabulary -- Part 8: Terms specific to fire-fighting, rescue services and handling hazardous materials 90.93 TC 21
ISO/CD 12828-1
Method validation for fire gas analysis -- Part 1: Limits of detection and quantification 30.20 TC 92/SC 3
ISO/TR 13387-1:1999
Fire safety engineering -- Part 1: Application of fire performance concepts to design objectives 90.93 TC 92/SC 4
ISO/TR 13387-2:1999
Fire safety engineering -- Part 2: Design fire scenarios and design fires 90.93 TC 92/SC 4
ISO/TR 13387-3:1999
Fire safety engineering -- Part 3: Assessment and verification of mathematical fire models 90.93 TC 92/SC 4
ISO/TR 13387-4:1999
Fire safety engineering -- Part 4: Initiation and development of fire and generation of fire effluents 90.93 TC 92/SC 4
ISO/TR 13387-5:1999
Fire safety engineering -- Part 5: Movement of fire effluents 90.93 TC 92/SC 4
ISO/TR 13387-6:1999
Fire safety engineering -- Part 6: Structural response and fire spread beyond the enclosure of origin 90.93 TC 92/SC 4
ISO/TR 13387-7:1999
Fire safety engineering -- Part 7: Detection, activation and suppression 90.93 TC 92/SC 4
ISO/TR 13387-8:1999
Fire safety engineering -- Part 8: Life safety -- Occupant behaviour, location and condition 90.93 TC 92/SC 4
ISO/NP TS 13447
Fire Safety Engineering - Guidance for use of zone fire models 10.99 TC 92/SC 4
ISO 13571:2007
Life-threatening components of fire -- Guidelines for the estimation of time available for escape using fire data 60.60 TC 92/SC 3
ISO 13943:2008
Fire safety -- Vocabulary 60.60 TC 92
ISO/TR 15656:2003
Fire resistance -- Guidelines for evaluating the predictive capability of calculation models for structural fire behaviour 60.60 TC 92/SC 2
ISO/PRF TR 15658
Fire resistance tests -- Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation 50.00 TC 92/SC 2
ISO 16730:2008
Fire safety engineering -- Assessment, verification and validation of calculation methods 60.60 TC 92/SC 4
ISO/TS 16732:2005
Fire safety engineering -- Guidance on fire risk assessment 90.92 TC 92/SC 4
ISO/TS 16733:2006
Fire safety engineering -- Selection of design fire scenarios and design fires 60.60 TC 92/SC 4
ISO 16734:2006
Fire safety engineering -- Requirements governing algebraic equations -- Fire plumes 90.20 TC 92/SC 4
ISO 16735:2006
Fire safety engineering -- Requirements governing algebraic equations -- Smoke layers 60.60 TC 92/SC 4
ISO 16736:2006
Fire safety engineering -- Requirements governing algebraic equations -- Ceiling jet flows 90.20 TC 92/SC 4
ISO 16737:2006
Fire safety engineering -- Requirements governing algebraic equations -- Vent flows 90.92 TC 92/SC 4
ISO/PRF TR 16738
Fire-safety engineering -- Technical information on methods for evaluating behaviour and movement of people 50.00 TC 92/SC 4
ISO/TS 19700:2007
Controlled equivalence ratio method for the determination of hazardous components of fire effluents 60.60 TC 92/SC 3
ISO 19701:2005
Methods for sampling and analysis of fire effluents 90.92 TC 92/SC 3
ISO/NP 19702
Toxicity testing of fire effluents -- Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis 10.99 TC 92/SC 3
ISO 19702:2006
Toxicity testing of fire effluents -- Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis 90.92 TC 92/SC 3
ISO 19703:2005
Generation and analysis of toxic gases in fire -- Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires 90.92 TC 92/SC 3
ISO/DIS 19703
Generation and analysis of toxic gases in fire -- Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires 40.20 TC 92/SC 3
ISO 19706:2007
Guidelines for assessing the fire threat to people 60.60 TC 92/SC 3
ISO/NP 21489
Fire tests -- Method of measurement of gases using Fourier transform infrared spectroscopy (FTIR) in cumulative smoke test 10.99 TC 92/SC 1
ISO/TR 22898:2006
Review of outputs for fire containment tests for buildings in the context of fire safety engineering 60.60 TC 92/SC 2
ISO/FDIS 23932
Fire safety engineering -- General principles 50.60 TC 92/SC 4
ISO/CD TS 24679
Fire safety engineering -- Performance of structure in fire 30.60 TC 92/SC 4
ISO/CD 26367-1
Guidelines for assessing the adverse environmental impact of fire effluents -- Part 1: Fundamentals 30.60 TC 92/SC 3
ISO/NP 26368
Guidance on containment systems for the prevention of pollution arising from uncontrolled fire water run-off 10.99 TC 92/SC 3
ISO/NP TR 29243-1
Fire Safety Engineering -- Fire risk assessment -- Part 1: Fire safety upgrades in offices 10.99 TC 92/SC 4
ISO/NP TR 29243-2
Fire Safety Engineering -- Fire risk assessment -- Part 2: Fire detection in hospital 10.99 TC 92/SC 4
ISO/DIS 29473
Fire tests -- Uncertainty of measurements in fire tests 40.60 TC 92/SC 1


13.220.10 Fire-fighting
Including equipment and vehicles
Flameproof clothing, see 13.340.10
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 3500:2005
Gas cylinders -- Seamless steel CO2 cylinders for fixed fire-fighting installations on ships 90.60 TC 58/SC 3
ISO 3500:2005/DAmd 1
40.60 TC 58/SC 3
ISO 4642-1:2009
Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems 60.60 TC 45/SC 1
ISO 4642-2:2009
Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles 60.60 TC 45/SC 1
ISO 5923:1989
Fire protection -- Fire extinguishing media -- Carbon dioxide 90.60 TC 21/SC 8
ISO 6183
Fire protection equipment -- Carbon dioxide extinguishing systems for use on premises -- Design and installation 60.00 TC 21/SC 8
ISO 6183:1990
Fire protection equipment -- Carbon dioxide extinguishing systems for use on premises -- Design and installation 90.92 TC 21/SC 5
ISO 7165:2009
Fire fighting -- Portable fire extinguishers -- Performance and construction 60.60 TC 21/SC 2
ISO 7201-1:1989
Fire protection -- Fire extinguishing media -- Halogenated hydrocarbons -- Part 1: Specifications for halon 1211 and halon 1301 90.93 TC 21/SC 8
ISO 7201-2:1991
Fire extinguishing media -- Halogenated hydrocarbons -- Part 2: Code of practice for safe handling and transfer procedures of halon 1211 and halon 1301 90.93 TC 21/SC 8
ISO 7202:1987
Fire protection -- Fire extinguishing media -- Powder 90.92 TC 21/SC 6
ISO 7203-1:1995
Fire extinguishing media -- Foam concentrates -- Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids 90.92 TC 21/SC 6
ISO/AWI 7203-1
Fire extinguishing media -- Foam concentrates -- Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids 20.00 TC 21/SC 6
ISO 7203-2:1995
Fire extinguishing media -- Foam concentrates -- Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids 90.92 TC 21/SC 6
ISO/AWI 7203-2
Fire extinguishing media -- Foam concentrates -- Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids 20.00 TC 21/SC 6
ISO/AWI 7203-3
Fire extinguishing media -- Foam concentrates -- Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids 20.00 TC 21/SC 6
ISO 7203-3:1999
Fire extinguishing media -- Foam concentrates -- Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids 90.92 TC 21/SC 6
ISO 11601:2008
Fire fighting -- Wheeled fire extinguishers -- Performance and construction 60.60 TC 21/SC 2
ISO/DIS 11602-1
Fire protection -- Portable and wheeled fire extinguishers -- Part 1: Selection and installation 40.60 TC 21/SC 2
ISO 11602-1:2000
Fire protection -- Portable and wheeled fire extinguishers -- Part 1: Selection and installation 90.92 TC 21/SC 2
ISO 11602-2:2000
Fire protection -- Portable and wheeled fire extinguishers -- Part 2: Inspection and maintenance 90.92 TC 21/SC 2
ISO/DIS 11602-2
Fire protection -- Portable and wheeled fire extinguishers -- Part 2: Inspection and maintenance 40.60 TC 21/SC 2
ISO/TS 12854:2009
Gaseous media fire-extinguishing systems -- Physical properties and system design -- Scaling factors for Class B fuels other than heptane 60.60 TC 21/SC 8
ISO/TS 13075:2009
Gaseous-media fire-extinguishing systems -- Engineered extinguishing systems -- Flow calculation implementation method and flow verification and testing for approval 60.60 TC 21/SC 8
ISO 14520-1:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 1: General requirements 90.20 TC 21/SC 8
ISO 14520-1:2006/Cor 1:2007
60.60 TC 21/SC 8
ISO 14520-2:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 2: CF3I extinguishant 90.20 TC 21/SC 8
ISO 14520-5:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 5: FK-5-1-12 extinguishant 90.20 TC 21/SC 8
ISO 14520-6:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 6: HCFC Blend A extinguishant 90.20 TC 21/SC 8
ISO 14520-8:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 8: HFC 125 extinguishant 90.20 TC 21/SC 8
ISO 14520-9:2006
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 9: HFC 227ea extinguishant 90.20 TC 21/SC 8
ISO 14520-10:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 10: HFC 23 extinguishant 90.60 TC 21/SC 8
ISO 14520-11:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 11: HFC 236fa extinguishant 90.60 TC 21/SC 8
ISO 14520-12:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 12: IG-01 extinguishant 90.60 TC 21/SC 8
ISO 14520-13:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 13: IG-100 extinguishant 90.60 TC 21/SC 8
ISO 14520-14:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 14: IG-55 extinguishant 90.60 TC 21/SC 8
ISO 14520-15:2005
Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 15: IG-541 extinguishant 90.60 TC 21/SC 8
ISO 14557:2002
Fire-fighting hoses -- Rubber and plastics suction hoses and hose assemblies 90.93 TC 45/SC 1
ISO 14557:2002/Amd 1:2007
60.60 TC 45/SC 1
ISO 15371:2009
Ships and marine technology -- Fire-extinguishing systems for protection of galley cooking equipment 60.60 TC 8/SC 1
ISO/DIS 15779
Condensed-aerosol fire-extinguishing systems -- Physical properties and system design -- General requirements 40.20 TC 21/SC 8
ISO 16003:2008
Components for fire-extinguishing systems using gas-- Requirements and test methods -- Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves 60.60 TC 21/SC 8
ISO/FDIS 16073.2
Wildland firefighting personal protective equipment -- Requirements and test methods 50.60 TC 94/SC 14
ISO 16852:2008
Flame arresters -- Performance requirements, test methods and limits for use 60.60 TC 21
ISO 16852:2008/Cor 1:2008
60.60 TC 21
ISO/TS 20885:2003
Gaseous media fire-extinguishing systems -- Area coverage fire test procedure -- Engineered and pre-engineered extinguishing units 90.20 TC 21/SC 8

13.220.20 Fire protection
Including equipment
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/TR 1896:1991
Products in fibre-reinforced cement -- Non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection 90.60 TC 77
ISO 5925-1:2007
Fire tests -- Smoke-control door and shutter assemblies -- Part 1: Ambient- and medium-temperature leakage tests 60.60 TC 92/SC 2
ISO/TR 5925-2:2006
Fire tests -- Smoke-control door and shutter assemblies -- Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy 60.60 TC 92/SC 2
ISO 6182-1:2004
Fire protection -- Automatic sprinkler systems -- Part 1: Requirements and test methods for sprinklers 90.60 TC 21/SC 5
ISO 6182-2:2005
Fire protection -- Automatic sprinkler systems -- Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms 90.60 TC 21/SC 5
ISO 6182-3:2005
Fire protection -- Automatic sprinkler systems -- Part 3: Requirements and test methods for dry pipe valves 90.60 TC 21/SC 5
ISO 6182-4:1993
Fire protection -- Automatic sprinkler systems -- Part 4: Requirements and test methods for quick-opening devices 90.92 TC 21/SC 5
ISO/NP 6182-4
Fire protection -- Automatic sprinkler systems -- Part 4: Requirements and test methods for quick-opening devices 10.99 TC 21/SC 5
ISO 6182-5:2006
Fire protection -- Automatic sprinkler systems -- Part 5: Requirements and test methods for deluge valves 90.20 TC 21/SC 5
ISO 6182-6:2006
Fire protection -- Automatic sprinkler systems -- Part 6: Requirements and test methods for check valves 90.20 TC 21/SC 5
ISO 6182-7:2004
Fire protection -- Automatic sprinkler systems -- Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers 90.60 TC 21/SC 5
ISO 6182-8:2006
Fire protection -- Automatic sprinkler systems -- Part 8: Requirements and test methods for pre-action dry alarm valves 90.20 TC 21/SC 5
ISO 6182-9:2005
Fire protection -- Automatic sprinkler system -- Part 9: Requirements and test methods for water mist nozzles 90.60 TC 21/SC 5
ISO 6182-10:2006
Fire protection -- Automatic sprinkler systems -- Part 10: Requirements and test methods for domestic sprinklers 90.20 TC 21/SC 5
ISO 6182-11:2003
Fire protection -- Automatic sprinkler systems -- Part 11: Requirements and test methods for pipe hangers 90.93 TC 21/SC 5
ISO/FDIS 6182-12
Fire protection -- Automatic sprinkler systems -- Part 12: Requirements and test methods for grooved-end components for steel pipe systems 50.92 TC 21/SC 5
ISO 7240-1:2005
Fire detection and alarm systems -- Part 1: General and definitions 90.60 TC 21/SC 3
ISO 7240-2:2003
Fire detection and alarm systems -- Part 2: Control and indicating equipment 90.60 TC 21/SC 3
ISO/NP 7240-3
Fire detection and alarm systems -- Part 3: Audible alarm devices 10.99 TC 21/SC 3
ISO 7240-4:2003
Fire detection and alarm systems -- Part 4: Power supply equipment 90.60 TC 21/SC 3
ISO 7240-5:2003
Fire detection and alarm systems -- Part 5: Point-type heat detectors 90.60 TC 21/SC 3
ISO 7240-5:2003/Cor 1:2005
60.60 TC 21/SC 3
ISO 7240-6:2004
Fire detection and alarm systems -- Part 6: Carbon monoxide fire detectors using electro-chemical cells 90.92 TC 21/SC 3
ISO/NP 7240-6
Fire detection and alarm systems -- Part 6: Carbon monoxide fire detectors using electro-chemical cells 10.99 TC 21/SC 3
ISO 7240-7:2003
Fire detection and alarm systems -- Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization 90.92 TC 21/SC 3
ISO/DIS 7240-7
Fire detection and alarm systems -- Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization 40.60 TC 21/SC 3
ISO 7240-8:2007
Fire detection and alarm systems -- Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor 60.60 TC 21/SC 3
ISO/TS 7240-9:2006
Fire detection and alarm systems -- Part 9: Test fires for fire detectors 90.20 TC 21/SC 3
ISO 7240-10:2007
Fire detection and alarm systems -- Part 10: Point-type flame detectors 60.60 TC 21/SC 3
ISO 7240-11:2005
Fire detection and alarm systems -- Part 11: Manual call points 90.60 TC 21/SC 3
ISO 7240-11:2005/Amd 1:2009
60.60 TC 21/SC 3
ISO/AWI 7240-12
Fire detection and alarm systems -- Part 12: Line type smoke detectors using a transmitted optical beam 20.00 TC 21/SC 3
ISO 7240-12:2006
Fire detection and alarm systems -- Part 12: Line type smoke detectors using a transmitted optical beam 90.92 TC 21/SC 3
ISO 7240-13:2005
Fire detection and alarm systems -- Part 13: Compatibility assessment of system components 90.93 TC 21/SC 3
ISO/TR 7240-14:2003
Fire detection and alarm systems -- Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings 90.20 TC 21/SC 3
ISO 7240-15:2004
Fire detection and alarm systems -- Part 15: Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor 90.93 TC 21/SC 3
ISO 7240-15:2004/Cor 1:2005
60.60 TC 21/SC 3
ISO 7240-16:2007
Fire detection and alarm systems -- Part 16: Sound system control and indicating equipment 60.60 TC 21/SC 3
ISO/FDIS 7240-17
Fire detection and fire alarm systems -- Part 17: Short-circuit isolators 50.00 TC 21/SC 3
ISO/DIS 7240-18
Fire detection and fire alarm systems -- Part 18: Input/output devices 40.60 TC 21/SC 3
ISO 7240-19:2007
Fire detection and alarm systems -- Part 19: Design, installation, commissioning and service of sound systems for emergency purposes 60.60 TC 21/SC 3
ISO/DIS 7240-20
Fire detection and alarm systems -- Part 20: Aspirating smoke detectors 40.60 TC 21/SC 3
ISO 7240-21:2005
Fire detection and alarm systems -- Part 21: Routing equipment 90.60 TC 21/SC 3
ISO 7240-22:2007
Fire detection and alarm systems -- Part 22: Smoke-detection equipment for ducts 90.92 TC 21/SC 3
ISO/DIS 7240-24
Fire detection and fire alarm systems -- Part 24: Sound-system loudspeakers 40.20 TC 21/SC 3
ISO/DIS 7240-25
Fire detection and fire alarm systems -- Part 25: Components using radio transmission paths 40.20 TC 21/SC 3
ISO 7240-27:2009
Fire detection and alarm systems -- Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor 60.60 TC 21/SC 3
ISO 7240-28:2008
Fire detection and alarm systems -- Part 28: Fire protection control equipment 60.60 TC 21/SC 3
ISO 12239:2003
Fire detection and fire alarm systems -- Smoke alarms 90.60 TC 21/SC 3
ISO 21927-1:2008
Smoke and heat control systems -- Part 1: Specification for smoke barriers 60.60 TC 21/SC 11
ISO 21927-2:2006
Smoke and heat control systems -- Part 2: Specification for natural smoke and heat exhaust ventilators 60.60 TC 21/SC 11
ISO 21927-2:2006/NP Amd 1
10.99 TC 21/SC 11
ISO 21927-3:2006
Smoke and heat control systems -- Part 3: Specification for powered smoke and heat exhaust ventilators 60.60 TC 21/SC 11
ISO 21927-3:2006/NP Amd 1
10.99 TC 21/SC 11
ISO/NP 21927-9
Smoke and heat control systems -- Part 9: Specification for control equipment 10.99 TC 21/SC 11
ISO/NP 21927-10
Smoke and heat control systems -- Part 10: Specification for power output devices 10.99 TC 21/SC 11

13.220.40 Ignitability and burning behaviour of materials and products
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 340:2004
Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method 90.60 TC 41/SC 3
ISO 871:2006
Plastics -- Determination of ignition temperature using a hot-air furnace 90.20 TC 61/SC 4
ISO 3582:2000
Flexible cellular polymeric materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame 90.93 TC 45/SC 4
ISO 3582:2000/Amd 1:2007
60.60 TC 45/SC 4
ISO 3795:1989
Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials 90.60 TC 22/SC 16
ISO 4589-1:1996
Plastics -- Determination of burning behaviour by oxygen index -- Part 1: Guidance 90.93 TC 61/SC 4
ISO 4589-2:1996
Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test 90.93 TC 61/SC 4
ISO 4589-2:1996/Amd 1:2005
60.60 TC 61/SC 4
ISO 4589-3:1996
Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test 90.93 TC 61/SC 4
ISO 4880:1997
Burning behaviour of textiles and textile products -- Vocabulary 90.93 TC 38
ISO 5659-1:1996
Plastics -- Smoke generation -- Part 1: Guidance on optical-density testing 90.93 TC 61/SC 4
ISO/WD 5659-2
Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test 20.99 TC 61/SC 4
ISO 5659-2:2006
Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test 90.92 TC 61/SC 4
ISO/TR 5659-3:1999
Plastics -- Smoke generation -- Part 3: Determination of optical density by a dynamic-flow method 90.20 TC 61/SC 4
ISO 6925:1982
Textile floor coverings -- Burning behaviour -- Tablet test at ambient temperature 90.93 TC 219
ISO 6940:2004
Textile fabrics -- Burning behaviour -- Determination of ease of ignition of vertically oriented specimens 90.93 TC 38
ISO 6941:2003
Textile fabrics -- Burning behaviour -- Measurement of flame spread properties of vertically oriented specimens 90.93 TC 38
ISO 7176-16:1997
Wheelchairs -- Part 16: Resistance to ignition of upholstered parts -- Requirements and test methods 90.92 TC 173/SC 1
ISO/CD 7176-16
Wheelchairs -- Part 16: Resistance to ignition of upholstered parts -- Requirements and test methods 30.99 TC 173/SC 1
ISO 8030:1995
Rubber and plastics hoses -- Method of test for flammability 90.93 TC 45/SC 1
ISO 8191-1:1987
Furniture -- Assessment of the ignitability of upholstered furniture -- Part 1: Ignition source: smouldering cigarette 90.93 TC 136
ISO 8191-2:1988
Furniture -- Assessment of ignitability of upholstered furniture -- Part 2: Ignition source: match-flame equivalent 90.93 TC 136
ISO 9038:2002
Test for sustained combustibility of liquids 90.92 TC 35/SC 9
ISO 9239-1:2002
Reaction to fire tests for floorings -- Part 1: Determination of the burning behaviour using a radiant heat source 90.92 TC 92/SC 1
ISO/DIS 9239-1
Reaction to fire tests for floorings -- Part 1: Determination of the burning behaviour using a radiant heat source 40.60 TC 92/SC 1
ISO 9239-2:2002
Reaction to fire tests for floorings -- Part 2: Determination of flame spread at a heat flux level of 25 kW/m2 90.93 TC 92/SC 1
ISO/TR 9240:1992
Textiles -- Design of apparel for reduced fire hazard 60.60 TC 38
ISO 9772:2001
Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame 90.93 TC 61/SC 4
ISO 9772:2001/Amd 1:2003
Specimens 60.60 TC 61/SC 4
ISO 9773:1998
Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source 90.60 TC 61/SC 4
ISO 9773:1998/Amd 1:2003
Specimens 60.60 TC 61/SC 4
ISO 10047:1993
Textiles -- Determination of surface burning time of fabrics 90.93 TC 38
ISO 10093:1998
Plastics -- Fire tests -- Standard ignition sources 90.92 TC 61/SC 4
ISO 10528:1995
Textiles -- Commercial laundering procedure for textile fabrics prior to flammability testing 90.93 TC 38/SC 2
ISO 10840:2008
Plastics -- Guidance for the use of standard fire tests 60.60 TC 61/SC 4
ISO 11907-1:1998
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 1: Guidance 90.93 TC 61/SC 4
ISO 11907-2:1995
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 2: Static method 90.93 TC 61/SC 4
ISO 11907-3:1998
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 3: Dynamic decomposition method using a travelling furnace 90.93 TC 61/SC 4
ISO 11907-4:1998
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 4: Dynamic decomposition method using a conical radiant heater 90.93 TC 61/SC 4
ISO/CD 12136
Reaction to fire tests -- Measurement of fundamental material properties using a fire propagation apparatus 30.60 TC 92/SC 1
ISO 12138:1996
Textiles -- Domestic laundering procedures for textile fabrics prior to flammability testing 90.93 TC 38/SC 2
ISO/TR 12470:1998
Fire-resistance tests -- Guidance on the application and extension of results 90.93 TC 92/SC 2
ISO/CD 12863
Standard Test Method for Measuring the Ignition Propensity of Cigarettes 30.20 TC 92/SC 1
ISO 12952-1:1998
Textiles -- Burning behaviour of bedding items -- Part 1: General test methods for the ignitability by a smouldering cigarette 90.92 TC 38
ISO/DIS 12952-1
Textiles -- Assessment of the ignitability of bedding items -- Part 1: Ignition source: smouldering cigarette 40.60 TC 38
ISO 12952-2:1998
Textiles -- Burning behaviour of bedding items -- Part 2: Specific test methods for the ignitability by a smouldering cigarette 90.92 TC 38
ISO/DIS 12952-3
Textiles -- Assessment of the ignitability of bedding items -- Part 3: Ignition source: match flame equivalent 40.60 TC 38
ISO 12952-3:1998
Textiles -- Burning behaviour of bedding items -- Part 3: General test methods fot the ignitability by a small open flame 90.92 TC 38
ISO 12952-4:1998
Textiles -- Burning behaviour of bedding items -- Part 4: Specific test methods for the ignitability by a small open flame 90.92 TC 38
ISO 12992:1995
Plastics -- Vertical flame spread determination for film and sheet 90.93 TC 61/SC 4
ISO 13774:1998
Rubber and plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 90.93 TC 45/SC 1
ISO 14624-1:2003
Space systems -- Safety and compatibility of materials -- Part 1: Determination of upward flammability of materials 90.93 TC 20/SC 14
ISO 14624-2:2003
Space systems -- Safety and compatibility of materials -- Part 2: Determination of flammability of electrical-wire insulation and accessory materials 90.93 TC 20/SC 14
ISO 14624-4:2003
Space systems -- Safety and compatibility of materials -- Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments 90.93 TC 20/SC 14
ISO 14696:2009
Reaction-to-fire tests -- Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL) 60.60 TC 92/SC 1
ISO/DIS 14934-1
Fire tests -- Calibration and use of heat-flux meters -- Part 1: General principles 40.20 TC 92/SC 1
ISO/TS 14934-1:2002
Fire tests -- Calibration and use of radiometers and heat flux meters -- Part 1: General principles 90.92 TC 92/SC 1
ISO 14934-2:2006
Fire tests -- Calibration and use of heat flux meters -- Part 2: Primary calibration methods 90.20 TC 92/SC 1
ISO/NP 14934-3
Fire tests -- Calibration and use of heat flux meters -- Part 3: Secondary calibration method 10.99 TC 92/SC 1
ISO 14934-3:2006
Fire tests -- Calibration and use of heat flux meters -- Part 3: Secondary calibration method 90.92 TC 92/SC 1
ISO/TS 14934-4:2007
Fire tests -- Calibration of heat flux meters -- Part 4: Guidance on the use of heat flux meters in fire tests 60.60 TC 92/SC 1
ISO 15029-1:1999
Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 1: Spray flame persistence -- Hollow-cone nozzle method 90.93 TC 28
ISO/CD TS 15029-3
Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 3: Spray tests, large scale method 30.00 TC 28
ISO/TR 15655:2003
Fire resistance -- Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design 60.60 TC 92/SC 2
ISO 15791-1:2002
Plastics -- Development and use of intermediate-scale fire tests for plastics products -- Part 1: General guidance 90.92 TC 61/SC 4
ISO/TR 17252:2008
Fire tests -- Applicability of reaction to fire tests to fire modelling and fire safety engineering 60.60 TC 92/SC 1
ISO/TS 17431:2006
Fire tests-- Reduced-scale model box test 90.20 TC 92/SC 1
ISO 17554:2005
Reaction to fire tests -- Mass loss measurement 90.60 TC 92/SC 1
ISO 21367:2007
Plastics -- Reaction to fire -- Test method for flame spread and combustion product release from vertically oriented specimens 60.60 TC 61/SC 4
ISO 24473:2008
Fire tests -- Open calorimetry -- Measurement of the rate of production of heat and combustion products for fires of up to 40 MW 60.60 TC 92/SC 1
ISO/FDIS 25762
Plastics -- Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites 50.20 TC 61/SC 4
ISO/WD 28926
Plastics -- Method for determining the flammability characteristics of plastics using microcalorimetry 20.99 TC 61/SC 4
ISO/CD 30021-1
Fire safety -- Intermediate-scale fire-resistance tests -- Part 1: General requirements 30.92 TC 92/SC 2
ISO/CD 30021-2
Fire safety -- Intermediate-scale fire-resistance tests -- Part 2: Tests for fibre-reinforced polymer composites 30.92 TC 92/SC 2
115IEC 60695-11-10:1999
Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods 60.60 TC 61/SC 4
116IEC 60695-11-10:1999/Amd 1:2003
60.60 TC 61/SC 4
117IEC 60695-11-20:1999
Fire hazard testing -- Part 11-20: Test flames -- 500 W flame test methods 60.60 TC 61/SC 4
118IEC 60695-11-20:1999/Amd 1:2003
60.60 TC 61/SC 4

13.220.50 Fire-resistance of building materials and elements
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 834-1:1999
Fire-resistance tests -- Elements of building construction -- Part 1: General requirements 90.60 TC 92/SC 2
ISO/PRF TR 834-2
Fire-resistance tests -- Elements of building construction -- Part 2: Guidance on measuring uniformity of furnace exposure on test samples 50.00 TC 92/SC 2
ISO/TR 834-3:1994
Fire-resistance tests -- Elements of building construction -- Part 3: Commentary on test method and test data application 90.92 TC 92/SC 2
ISO/CD TR 834-3
Fire-resistance tests -- Elements of building construction -- Part 3: Commentary on test method and test data application 30.20 TC 92/SC 2
ISO 834-4:2000
Fire-resistance tests -- Elements of building construction -- Part 4: Specific requirements for loadbearing vertical separating elements 90.93 TC 92/SC 2
ISO 834-5:2000
Fire-resistance tests -- Elements of building construction -- Part 5: Specific requirements for loadbearing horizontal separating elements 90.93 TC 92/SC 2
ISO 834-6:2000
Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams 90.93 TC 92/SC 2
ISO 834-7:2000
Fire-resistance tests -- Elements of building construction -- Part 7: Specific requirements for columns 90.93 TC 92/SC 2
ISO 834-8:2002
Fire-resistance tests -- Elements of building construction -- Part 8: Specific requirements for non-loadbearing vertical separating elements 90.93 TC 92/SC 2
ISO 834-8:2002/Cor 1:2009
60.60 TC 92/SC 2
ISO 834-9:2003
Fire-resistance tests -- Elements of building construction -- Part 9: Specific requirements for non-loadbearing ceiling elements 90.93 TC 92/SC 2
ISO 834-9:2003/Cor 1:2009
60.60 TC 92/SC 2
ISO/DIS 1182
Reaction to fire tests for building and transport products -- Non-combustibility test 40.60 TC 92/SC 1
ISO 1182:2002
Reaction to fire tests for building products -- Non-combustibility test 90.92 TC 92/SC 1
ISO 1716:2002
Reaction to fire tests for building products -- Determination of the heat of combustion 90.92 TC 92/SC 1
ISO/DIS 1716
Reaction to fire tests for building and transport products -- Determination of the heat of combustion 40.60 TC 92/SC 1
ISO 3008:2007
Fire-resistance tests -- Door and shutter assemblies 60.60 TC 92/SC 2
ISO 3009:2003
Fire-resistance tests -- Elements of building construction -- Glazed elements 90.93 TC 92/SC 2
ISO/TR 3814:1989
Tests for measuring "reaction-to-fire" of building materials -- Their development and application 90.93 TC 92/SC 1
ISO/TR 3956:1975
Principles of structural fire-engineering design with special regard to the connection between real fire exposure and the heating conditions of the standard fire-resistance test (ISO 834) 90.20 TC 92/SC 4
ISO 5657:1997
Reaction to fire tests -- Ignitability of building products using a radiant heat source 90.20 TC 92/SC 1
ISO/TS 5658-1:2006
Reaction to fire tests -- Spread of flame -- Part 1: Guidance on flame spread 60.60 TC 92/SC 1
ISO 5658-2:2006
Reaction to fire tests -- Spread of flame -- Part 2: Lateral spread on building and transport products in vertical configuration 90.92 TC 92/SC 1
ISO 5658-2:2006/NP Amd 1
10.99 TC 92/SC 1
ISO 5658-4:2001
Reaction to fire tests -- Spread of flame -- Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen 90.93 TC 92/SC 1
ISO 5660-1:2002
Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method) 90.93 TC 92/SC 1
ISO 5660-2:2002
Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 2: Smoke production rate (dynamic measurement) 90.93 TC 92/SC 1
ISO/TR 5660-3:2003
Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 3: Guidance on measurement 60.60 TC 92/SC 1
ISO/NP 5660-4
Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 4: Measurement of heat release for determination of low levels of combustibility 10.99 TC 92/SC 1
ISO/TR 5924:1989
Fire tests -- Reaction to fire -- Smoke generated by building products (dual-chamber test) 90.93 TC 92/SC 1
ISO 5925-1:2007
Fire tests -- Smoke-control door and shutter assemblies -- Part 1: Ambient- and medium-temperature leakage tests 60.60 TC 92/SC 2
ISO/TR 5925-2:2006
Fire tests -- Smoke-control door and shutter assemblies -- Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy 60.60 TC 92/SC 2
ISO/TR 6167:1984
Fire-resistance tests -- Contribution made by suspended ceilings to the protection of steel beams in floor and roof assemblies 90.60 TC 92/SC 2
ISO 6944-1:2008
Fire containment -- Elements of building construction -- Part 1: Ventilation ducts 60.60 TC 92/SC 2
ISO 6944-2
Fire containment -- Elements of building construction -- Part 2: Kitchen extract ducts 60.00 TC 92/SC 2
ISO 9705:1993
Fire tests -- Full-scale room test for surface products 90.93 TC 92/SC 1
ISO/TR 9705-2:2001
Reaction-to-fire tests -- Full-scale room tests for surface products -- Part 2: Technical background and guidance 90.93 TC 92/SC 1
ISO/TR 10158:1991
Principles and rationale underlying calculation methods in relation to fire resistance of structural elements 90.60 TC 92/SC 2
ISO 10294-1:1996
Fire resistance tests -- Fire dampers for air distribution systems -- Part 1: Test method 90.93 TC 92/SC 2
ISO 10294-2:1999
Fire resistance tests -- Fire dampers for air distribution systems -- Part 2: Classification, criteria and field of application of test results 90.93 TC 92/SC 2
ISO 10294-3:1999
Fire resistance tests -- Fire dampers for air distribution systems -- Part 3: Guidance on the test method 90.93 TC 92/SC 2
ISO 10294-4:2001
Fire resistance tests -- Fire dampers for air distribution systems -- Part 4: Test of thermal release mechanism 90.93 TC 92/SC 2
ISO 10294-5:2005
Fire resistance tests -- Fire dampers for air distribution systems -- Part 5: Intumescent fire dampers 90.93 TC 92/SC 2
ISO 10295-1:2007
Fire tests for building elements and components -- Fire testing of service installations -- Part 1: Penetration seals 60.60 TC 92/SC 2
ISO 10295-2:2009
Fire tests for building elements and components -- Fire testing of service installations -- Part 2: Linear joint (gap) seals 60.60 TC 92/SC 2
ISO 10295-2:2009/Cor 1:2009
60.60 TC 92/SC 2
ISO/CD TR 10295-3
Fire tests for building elements and components -- Fire testing of service installations -- Part 3: Guidance on the use of test configuration to establish direct and extended fields of application -- Single component penetration seals 30.60 TC 92/SC 2
ISO/TR 11696-1:1999
Uses of reaction to fire test results -- Part 1: Application of test results to predict fire performance of internal linings and other building products 90.93 TC 92/SC 1
ISO/TR 11696-2:1999
Uses of reaction to fire test results -- Part 2: Fire hazard assessment of construction products 90.93 TC 92/SC 1
ISO/TR 11925-1:1999
Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 1: Guidance on ignitability 90.93 TC 92/SC 1
ISO 11925-2:2002
Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 2: Single-flame source test 90.92 TC 92/SC 1
ISO/DIS 11925-2
Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 2: Single-flame source test 40.20 TC 92/SC 1
ISO 11925-3:1997
Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 3: Multi-source test 90.93 TC 92/SC 1
ISO 11925-3:1997/Cor 1:1998
60.60 TC 92/SC 1
ISO/CD 12136
Reaction to fire tests -- Measurement of fundamental material properties using a fire propagation apparatus 30.60 TC 92/SC 1
ISO 12468-1:2003
External exposure of roofs to fire -- Part 1: Test method 90.60 TC 92/SC 2
ISO 12468-2:2005
External fire exposure to roofs -- Part 2: Classification of roofs 90.93 TC 92/SC 2
ISO/CD TR 12468-3
External exposure of roofs to fire -- Part 3: Commentary 30.20 TC 92/SC 2
ISO/TR 12470:1998
Fire-resistance tests -- Guidance on the application and extension of results 90.93 TC 92/SC 2
ISO/TR 12471:2004
Computational structural fire design -- Review of calculation models, fire tests for determining input material data and needs for further development 60.60 TC 92/SC 2
ISO 12472:2003
Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals 90.60 TC 92/SC 2
ISO/NP 12949
Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets 10.99 TC 92/SC 1
ISO/NP 13784-1
Reaction-to-fire tests for sandwich panel building systems -- Part 1: Test method for small rooms 10.99 TC 92/SC 1
ISO 13784-1:2002
Reaction-to-fire tests for sandwich panel building systems -- Part 1: Test method for small rooms 90.92 TC 92/SC 1
ISO 13784-2:2002
Reaction-to-fire tests for sandwich panel building systems -- Part 2: Test method for large rooms 90.93 TC 92/SC 1
ISO 13785-1:2002
Reaction-to-fire tests for fa?ades -- Part 1: Intermediate-scale test 90.93 TC 92/SC 1
ISO 13785-2:2002
Reaction-to-fire tests for fa?ades -- Part 2: Large-scale test 90.93 TC 92/SC 1
ISO 14696:2009
Reaction-to-fire tests -- Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL) 60.60 TC 92/SC 1
ISO 14697:2007
Reaction-to-fire tests -- Guidance on the choice of substrates for building and transport products 60.60 TC 92/SC 1
ISO/DIS 14934-1
Fire tests -- Calibration and use of heat-flux meters -- Part 1: General principles 40.20 TC 92/SC 1
ISO/TS 14934-1:2002
Fire tests -- Calibration and use of radiometers and heat flux meters -- Part 1: General principles 90.92 TC 92/SC 1
ISO 14934-2:2006
Fire tests -- Calibration and use of heat flux meters -- Part 2: Primary calibration methods 90.20 TC 92/SC 1
ISO/NP 14934-3
Fire tests -- Calibration and use of heat flux meters -- Part 3: Secondary calibration method 10.99 TC 92/SC 1
ISO 14934-3:2006
Fire tests -- Calibration and use of heat flux meters -- Part 3: Secondary calibration method 90.92 TC 92/SC 1
ISO/TS 14934-4:2007
Fire tests -- Calibration of heat flux meters -- Part 4: Guidance on the use of heat flux meters in fire tests 60.60 TC 92/SC 1
ISO/TR 17252:2008
Fire tests -- Applicability of reaction to fire tests to fire modelling and fire safety engineering 60.60 TC 92/SC 1
ISO/TS 17431:2006
Fire tests-- Reduced-scale model box test 90.20 TC 92/SC 1
ISO 17554:2005
Reaction to fire tests -- Mass loss measurement 90.60 TC 92/SC 1
ISO 20632:2008
Reaction-to-fire tests -- Small room test for pipe insulation products or systems 60.60 TC 92/SC 1
ISO/TS 22269:2005
Reaction to fire tests -- Fire growth -- Full-scale test for stairs and stair coverings 90.60 TC 92/SC 1
ISO/TR 22898:2006
Review of outputs for fire containment tests for buildings in the context of fire safety engineering 60.60 TC 92/SC 2
ISO 22899-1:2007
Determination of the resistance to jet fires of passive fire protection materials -- Part 1: General requirements 60.60 TC 92/SC 2
ISO 24473:2008
Fire tests -- Open calorimetry -- Measurement of the rate of production of heat and combustion products for fires of up to 40 MW 60.60 TC 92/SC 1
ISO/CD TR 25742
Lifts (elevators) -- Study of the methods used for fire testing lift landing doors 30.60 TC 178

13.220.99 Other standards related to protection against fire
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 13344:2004
Estimation of the lethal toxic potency of fire effluents 90.93 TC 92/SC 3
ISO/DIS 15928-4
Houses -- Description of performance -- Part 4: Fire safety 40.60 TC 59/SC 15
ISO 16312-1:2006
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 1: Criteria 90.20 TC 92/SC 3
ISO/TR 16312-2:2007
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 2: Evaluation of individual physical fire models 60.60 TC 92/SC 3
ISO 27368:2008
Analysis of blood for asphyxiant toxicants -- Carbon monoxide and hydrogen cyanide 60.60 TC 92/SC 3



13.230 Explosion protection
Electrical apparatus for explosive atmospheres, see 29.260.20
Explosives and pyrotechnics, see 71.100.30
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 6184-1:1985
Explosion protection systems -- Part 1: Determination of explosion indices of combustible dusts in air 90.93 TC 21/SC 5
ISO 6184-2:1985
Explosion protection systems -- Part 2: Determination of explosion indices of combustible gases in air 90.93 TC 21/SC 5
ISO 6184-3:1985
Explosion protection systems -- Part 3: Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures 90.93 TC 21/SC 5
ISO 6184-4:1985
Explosion protection systems -- Part 4: Determination of efficacy of explosion suppression systems 90.93 TC 21/SC 5



13.240 Protection against excessive pressure
Including safety valves, bursting disc devices, etc.
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/CD 4126-1
Safety devices for protection against excessive pressure -- Part 1: Safety valves 30.60 TC 185
ISO 4126-1:2004
Safety devices for protection against excessive pressure -- Part 1: Safety valves 90.92 TC 185
ISO 4126-1:2004/Cor 1:2007
60.60 TC 185
ISO 4126-2:2003
Safety devices for protection against excessive pressure -- Part 2: Bursting disc safety devices 90.93 TC 185
ISO 4126-3:2006
Safety devices for protection against excessive pressure -- Part 3: Safety valves and bursting disc safety devices in combination 90.20 TC 185
ISO/CD 4126-4
Safety devices for protection against excessive pressure -- Part 4: Pilot-operated safety valves 30.60 TC 185
ISO 4126-4:2004
Safety devices for protection against excessive pressure -- Part 4: Pilot-operated safety valves 90.92 TC 185
ISO 4126-4:2004/Cor 1:2007
60.60 TC 185
ISO 4126-5:2004
Safety devices for protection against excessive pressure -- Part 5: Controlled safety pressure relief systems (CSPRS) 90.92 TC 185
ISO/CD 4126-5
Safety devices for protection against excessive pressure -- Part 5: Controlled safety pressure relief systems (CSPRS) 30.60 TC 185
ISO 4126-5:2004/Cor 1:2006
60.60 TC 185
ISO 4126-5:2004/Cor 2:2007
60.60 TC 185
ISO 4126-6:2003
Safety devices for protection against excessive pressure -- Part 6: Application, selection and installation of bursting disc safety devices 90.92 TC 185
ISO/NP 4126-6
Safety devices for protection against excessive pressure -- Part 6: Application, selection and installation of bursting disc safety devices 10.99 TC 185
ISO 4126-7:2004
Safety devices for protection against excessive pressure -- Part 7: Common data 90.92 TC 185
ISO/CD 4126-7
Safety devices for protection against excessive pressure -- Part 7: Common data 30.60 TC 185
ISO 4126-7:2004/Cor 1:2006
60.60 TC 185
ISO 4126-9:2008
Safety devices for protection against excessive pressure -- Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices 60.60 TC 185
ISO/DIS 4126-10
Safety devices for protection against excessive pressure -- Part 10: Sizing of safety valves and connected inlet and outlet lines for gas/liquid two-phase flow 40.60 TC 185
ISO/NP 4126-11
Safety devices for protection against excessive pressure -- Part 11: Performance testing 10.99 TC 185


13.260 Protection against electric shock. Live working
Including tools for working with voltages
13.280 Radiation protection
Including protection against radio-frequency radiation
Radiation measurements, see 17.240
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 361:1975
Basic ionizing radiation symbol 90.93 TC 85
ISO 1757:1996
Personal photographic dosemeters 90.93 TC 85/SC 2
ISO 2855:1976
Radioactive materials -- Packagings -- Test for contents leakage and radiation leakage 90.93 TC 85/SC 5
ISO/FDIS 2889
Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities 50.00 TC 85/SC 2
ISO 2889:1975
General principles for sampling airborne radioactive materials 90.92 TC 85/SC 2
ISO 2919:1999
Radiation protection -- Sealed radioactive sources -- General requirements and classification 90.92 TC 85/SC 2
ISO 3925:1978
Unsealed radioactive substances -- Identification and certification 90.93 TC 85/SC 2
ISO 6962:2004
Nuclear energy -- Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste 90.60 TC 85/SC 5
ISO 7205:1986
Radionuclide gauges -- Gauges designed for permanent installation 90.92 TC 85/SC 2
ISO 7212:1986
Enclosures for protection against ionizing radiation -- Lead shielding units for 50 mm and 100 mm thick walls 90.93 TC 85/SC 2
ISO 7503-1:1988
Evaluation of surface contamination -- Part 1: Beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters 90.93 TC 85/SC 2
ISO 7503-2:1988
Evaluation of surface contamination -- Part 2: Tritium surface contamination 90.93 TC 85/SC 2
ISO 7503-3:1996
Evaluation of surface contamination -- Part 3: Isomeric transition and electron capture emitters, low energy beta-emitters (E bêtamax less than 0,15 MeV) 90.93 TC 85/SC 2
ISO 8194:1987
Radiation protection -- Clothing for protection against radioactive contamination -- Design, selection, testing and use 90.93 TC 85/SC 2
ISO 8690:1988
Decontamination of radioactively contaminated surfaces -- Method for testing and assessing the ease of decontamination 90.93 TC 85/SC 2
ISO 9271:1992
Decontamination of radioactively contaminated surfaces -- Testing of decontamination agents for textiles 90.93 TC 85/SC 2
ISO 9404-1:1991
Enclosures for protection against ionizing radiation -- Lead shielding units for 150 mm, 200 mm and 250 mm thick walls -- Part 1: Chevron units of 150 mm and 200 mm thickness 90.93 TC 85/SC 2
ISO 9697:2008
Water quality -- Measurement of gross beta activity in non-saline water -- Thick source method 60.60 TC 147
ISO/CD 9698
Water quality -- Determination of tritium activity concentration -- Liquid scintillation counting method 30.99 TC 147
ISO 9698:1989
Water quality -- Determination of tritium activity concentration -- Liquid scintillation counting method 90.92 TC 147
ISO 9978:1992
Radiation protection -- Sealed radioactive sources -- Leakage test methods 90.60 TC 85/SC 2
ISO 10648-1:1997
Containment enclosures -- Part 1: Design principles 90.93 TC 85/SC 2
ISO 10648-2:1994
Containment enclosures -- Part 2: Classification according to leak tightness and associated checking methods 90.93 TC 85/SC 2
ISO/FDIS 10704
Water quality -- Measurement of gross alpha and gross beta activity in non-saline water -- Thin source deposit method 50.00 TC 147
ISO 11932:1996
Activity measurements of solid materials considered for recycling, re-use or disposal as non-radioactive waste 90.93 TC 85/SC 5
ISO 11933-1:1997
Components for containment enclosures -- Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units 90.60 TC 85/SC 2
ISO 11933-2:1997
Components for containment enclosures -- Part 2: Gloves, welded bags, gaiters for remote - handling tongs and for manipulators 90.60 TC 85/SC 2
ISO 11933-3:1998
Components for containment enclosures -- Part 3: Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums 90.93 TC 85/SC 2
ISO 11933-4:2001
Components for containment enclosures -- Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices 90.93 TC 85/SC 2
ISO 11933-5:2001
Components for containment enclosures -- Part 5: Penetrations for electrical and fluid circuits 90.93 TC 85/SC 2
ISO/WD 12749-1
Nuclear energy -- Vocabulary -- Part 1: Radiation protection 20.60 TC 85
ISO 12790-1:2001
Radiation protection -- Performance criteria for radiobioassay -- Part 1: General principles 90.92 TC 85/SC 2
ISO 12794:2000
Nuclear energy -- Radiation protection -- Individual thermoluminescence dosemeters for extremities and eyes 90.93 TC 85/SC 2
ISO 12807:1996
Safe transport of radioactive materials -- Leakage testing on packages 90.92 TC 85/SC 5
ISO 14146:2000
Radiation protection -- Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation 90.93 TC 85/SC 2
ISO 14152:2001
Neutron radiation protection shielding -- Design principles and considerations for the choice of appropriate materials 90.93 TC 85/SC 2
ISO 14152:2001/Cor 1:2002
60.60 TC 85/SC 2
ISO 15080:2001
Nuclear facilities -- Ventilation penetrations for shielded enclosures 90.93 TC 85/SC 2
ISO 15382:2002
Nuclear energy -- Radiationprotection -- Procedure for radiation protection monitoring in nuclear installations for external exposure to weakly penetrating radiation, especially to beta radiation 90.93 TC 85/SC 2
ISO 17874-1:2004
Remote handling devices for radioactive materials -- Part 1: General requirements 90.92 TC 85/SC 2
ISO/NP 17874-1
Remote handling devices for radioactive materials -- Part 1: General requirements 10.99 TC 85/SC 2
ISO 17874-2:2004
Remote-handling devices for radioactive materials -- Part 2: Mechanical master-slave manipulators 90.93 TC 85/SC 2
ISO/DIS 17874-3
Remote handling devices for radioactive materials -- Part 3: Electrical master-slave manipulators 40.20 TC 85/SC 2
ISO 17874-4:2006
Remote handling devices for radioactive materials -- Part 4: Power manipulators 90.20 TC 85/SC 2
ISO 17874-5:2007
Remote handling devices for radioactive materials -- Part 5: Remote handling tongs 60.60 TC 85/SC 2
ISO 19238:2004
Radiation protection -- Performance criteria for service laboratories performing biological dosimetry by cytogenetics 90.92 TC 85/SC 2
ISO 20553:2006
Radiation protection -- Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material 90.20 TC 85/SC 2
ISO 20785-1:2006
Dosemetry for exposures to cosmic radiation in civilian aircraft -- Part 1: Conceptual basis for measurements 90.20 TC 85/SC 2
ISO/CD 20785-2
Dosimetry for exposures to cosmic radiation in civilian aircraft -- Part 2: Characterization of instrument response 30.99 TC 85/SC 2
ISO 21243:2008
Radiation protection -- Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies -- General principles and application to dicentric assay 60.60 TC 85/SC 2
ISO 21482:2007
Ionizing-radiation warning -- Supplementary symbol 60.60 TC 85/SC 2
ISO 21909:2005
Passive personal neutron dosemeters -- Performance and test requirements 90.60 TC 85/SC 2
ISO 21909:2005/Cor 1:2007
60.60 TC 85/SC 2
ISO 22188:2004
Monitoring for inadvertent movement and illicit trafficking of radioactive material 90.93 TC 85/SC 2
ISO/DIS 27048
Radiation protection -- Dose assessment for the monitoring of workers for internal radiation exposure 40.20 TC 85/SC 2
ISO/CIE 28077:2006
Photocarcinogenesis action spectrum (non-melanoma skin cancers) 60.60 CIE
ISO/DIS 28218
Radiation protection -- Performance criteria for radiobioassay 40.60 TC 85/SC 2
ISO/DIS 29661
Reference radiation fields for radiation protection -- Definitions and fundamental concepts 40.20 TC 85/SC 2


13.300 Protection against dangerous goods
Including performance requirements for dangerous goods, their handling, storage, transportation, marking, labelling, etc.
Explosives, see 71.100.30
Nuclear fissile materials, see 27.120.30
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 16101:2004
Packaging -- Transport packaging for dangerous goods -- Plastics compatibility testing 90.93 TC 122/SC 3
ISO 16103:2005
Packaging -- Transport packaging for dangerous goods -- Recycled plastics material 90.60 TC 122/SC 3
ISO 16104:2003
Packaging -- Transport packaging for dangerous goods -- Test methods 90.60 TC 122/SC 3
ISO 16106:2006
Packaging -- Transport packages for dangerous goods -- Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings -- Guidelines for the application of ISO 9001 90.20 TC 122/SC 3
ISO 16467:2003
Packaging -- Transport packages for dangerous goods -- Test methods for IBCs 90.60 TC 122/SC 3
ISO 16883:2007
Packaging -- Transport packages for dangerous goods -- Test methods for large packagings 60.60 TC 122/SC 3
ISO 23667:2007
Packaging -- Transport packaging for dangerous goods -- Rigid plastics and plastics composite IBCs -- Compatibility testing 60.60 TC 122/SC 3


13.310 Protection against crime
Including security services, security procedures, burglar alarm devices, burglary resisting materials and equipment, bullet resisting materials and equipment, anti-theft devices for vehicles, safes, strong rooms, etc.
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/TR 10476:1990
Doorsets -- Assessment of burglar-proofness 90.93 TC 162
ISO/CD 22448
Earth-moving -- Theft deterrent systems -- Classification and performance 30.60 TC 127/SC 3


13.320 Alarm and warning systems
Burglar alarm and warning systems, see 13.310
Warning devices for road vehicles, see 43.040.20
13.340 Protective equipment
Occupational safety, see 13.100
ICS Field
13.340.01 Protective equipment in general
13.340.10 Protective clothing
Including flameproof clothing
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/TR 2801:2007
Clothing for protection against heat and flame -- General recommendations for selection, care and use of protective clothing 60.60 TC 94/SC 13
ISO/NP 6529
Protective clothing -- Protection against chemicals -- Determination of resistance of protective clothing materials to permeation by liquids and gases 10.99 TC 94/SC 13
ISO 6529:2001
Protective clothing -- Protection against chemicals -- Determination of resistance of protective clothing materials to permeation by liquids and gases 90.92 TC 94/SC 13
ISO 6530:2005
Protective clothing -- Protection against liquid chemicals -- Test method for resistance of materials to penetration by liquids 90.93 TC 94/SC 13
ISO 6942:2002
Protective clothing -- Protection against heat and fire -- Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat 90.60 TC 94/SC 13
ISO 8194:1987
Radiation protection -- Clothing for protection against radioactive contamination -- Design, selection, testing and use 90.93 TC 85/SC 2
ISO 9150:1988
Protective clothing -- Determination of behaviour of materials on impact of small splashes of molten metal 90.93 TC 94/SC 13
ISO 9151:1995
Protective clothing against heat and flame -- Determination of heat transmission on exposure to flame 90.92 TC 94/SC 13
ISO 9185:2007
Protective clothing -- Assessment of resistance of materials to molten metal splash 60.60 TC 94/SC 13
ISO 11393-1:1998
Protective clothing for users of hand-held chain-saws -- Part 1: Test rig driven by a flywheel for testing resistance to cutting by a chain-saw 90.93 TC 94/SC 13
ISO 11393-2:1999
Protective clothing for users of hand-held chain-saws -- Part 2: Test methods and performance requirements for leg protectors 90.93 TC 94/SC 13
ISO 11393-5:2001
Protective clothing for users of hand-held chain-saws -- Part 5: Test methods and performance requirements for protective gaiters 90.93 TC 94/SC 13
ISO 11393-6:2007
Protective clothing for users of hand-held chain-saws -- Part 6: Test methods and performance requirements for upper body protectors 60.60 TC 94/SC 13
ISO/TR 11610:2004
Protective clothing -- Vocabulary 60.60 TC 94/SC 13
ISO 11611:2007
Protective clothing for use in welding and allied processes 60.60 TC 94/SC 13
ISO 11612:2008
Protective clothing -- Clothing to protect against heat and flame 60.60 TC 94/SC 13
ISO/DIS 11613.2
Personal protective equipment ensembles for firefighters -- Test methods and requirements for PPE used for fighting fires in structures 40.60 TC 94/SC 14
ISO 11613:1999
Protective clothing for firefighters -- Laboratory test methods and performance requirements 90.92 TC 94/SC 14
ISO 12127-1:2007
Clothing for protection against heat and flame -- Determination of contact heat transmission through protective clothing or constituent materials -- Part 1: Test method using contact heat produced by heating cylinder 60.60 TC 94/SC 13
ISO 12127-2:2007
Clothing for protection against heat and flame -- Determination of contact heat transmission through protective clothing or constituent materials -- Part 2: Test method using contact heat produced by dropping small cylinders 60.60 TC 94/SC 13
ISO 13506:2008
Protective clothing against heat and flame -- Test method for complete garments -- Prediction of burn injury using an instrumented manikin 60.60 TC 94/SC 13
ISO 13688:1998
Protective clothing -- General requirements 90.92 TC 94/SC 13
ISO/AWI 13688
Protective clothing -- General requirements 20.00 TC 94/SC 13
ISO 13982-1:2004
Protective clothing for use against solid particulates -- Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) 90.60 TC 94/SC 13
ISO 13982-1:2004/DAmd 1
40.20 TC 94/SC 13
ISO 13982-2:2004
Protective clothing for use against solid particulates -- Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits 90.92 TC 94/SC 13
ISO 13994:2005
Clothing for protection against liquid chemicals -- Determination of the resistance of protective clothing materials to penetration by liquids under pressure 90.60 TC 94/SC 13
ISO 13994:2005/Cor 1:2006
60.60 TC 94/SC 13
ISO/CD 13995
Protective clothing -- Mechanical properties -- Test method for the determination of the resistance to puncture and dynamic tearing of materials 30.60 TC 94/SC 13
ISO 13995:2000
Protective clothing -- Mechanical properties -- Test method for the determination of the resistance to puncture and dynamic tearing of materials 90.92 TC 94/SC 13
ISO 13996:1999
Protective clothing -- Mechanical properties -- Determination of resistance to puncture 90.93 TC 94/SC 13
ISO 13997:1999
Protective clothing -- Mechanical properties -- Determination of resistance to cutting by sharp objects 90.93 TC 94/SC 13
ISO 13998:2003
Protective clothing -- Aprons, trousers and vests protecting against cuts and stabs by hand knives 90.93 TC 94/SC 13
ISO 14116:2008
Protective clothing -- Protection against heat and flame -- Limited flame spread materials, material assemblies and clothing 60.60 TC 94/SC 13
ISO 14460:1999
Protective clothing for automobile racing drivers -- Protection against heat and flame -- Performance requirements and test methods 90.93 TC 94/SC 13
ISO 14877:2002
Protective clothing for abrasive blasting operations using granular abrasives 90.93 TC 94/SC 13
ISO 15025:2000
Protective clothing -- Protection against heat and flame -- Method of test for limited flame spread 90.93 TC 94/SC 13
ISO/CD 15027-1
Immersion suits -- Part 1: Constant wear suits, requirements including safety 30.20 TC 188
ISO 15027-1:2002
Immersion suits -- Part 1: Constant wear suits, requirements including safety 90.92 TC 188
ISO/CD 15027-2
Immersion suits -- Part 2: Abandonment suits, requirements including safety 30.20 TC 188
ISO 15027-2:2002
Immersion suits -- Part 2: Abandonment suits, requirements including safety 90.92 TC 188
ISO 15027-3:2002
Immersion suits -- Part 3: Test methods 90.92 TC 188
ISO/CD 15027-3
Immersion suits -- Part 3: Test methods 30.20 TC 188
ISO 15383:2001
Protective gloves for firefighters -- Laboratory test methods and performance requirements 90.60 TC 94/SC 14
ISO 15384:2003
Protective clothing for firefighters -- Laboratory test methods and performance requirements for wildland firefighting clothing 90.60 TC 94/SC 14
ISO 15538:2001
Protective clothing for firefighters -- Laboratory test methods and performance requirements for protective clothing with a reflective outer surface 90.60 TC 94/SC 14
ISO/FDIS 16073.2
Wildland firefighting personal protective equipment -- Requirements and test methods 50.60 TC 94/SC 14
ISO 16602:2007
Protective clothing for protection against chemicals -- Classification, labelling and performance requirements 60.60 TC 94/SC 13
ISO 16603:2004
Clothing for protection against contact with blood and body fluids -- Determination of the resistance of protective clothing materials to penetration by blood and body fluids -- Test method using synthetic blood 90.93 TC 94/SC 13
ISO 16604:2004
Clothing for protection against contact with blood and body fluids -- Determination of resistance of protective clothing materials to penetration by blood-borne pathogens -- Test method using Phi-X 174 bacteriophage 90.93 TC 94/SC 13
ISO/DIS 17491-1
Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 1: Determination of resistance to outward leakage of gases (internal pressure test) 40.60 TC 94/SC 13
ISO/DIS 17491-2
Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test) 40.60 TC 94/SC 13
ISO 17491-3:2008
Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 3: Determination of resistance to penetration by a jet of liquid (jet test) 60.60 TC 94/SC 13
ISO 17491-4:2008
Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 4: Determination of resistance to penetration by a spray of liquid (spray test) 60.60 TC 94/SC 13
ISO 17492:2003
Clothing for protection against heat and flame -- Determination of heat transmission on exposure to both flame and radiant heat 60.60 TC 94/SC 13
ISO 17492:2003/Cor 1:2004
60.60 TC 94/SC 13
ISO 17493:2000
Clothing and equipment for protection against heat -- Test method for convective heat resistance using a hot air circulating oven 90.93 TC 94/SC 13
ISO/CD 20471
High-visibility warning clothing for professional use -- Test methods and requirements 30.60 TC 94/SC 13
ISO/CD TS 21808
Guidance on the selection, use, care and maintenance of personnel protective equipment (PPE) designed to provide protection for firelighters 30.99 TC 94/SC 14
ISO/NP 22488
Ships and marine technology -- Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet) 10.99 TC 8/SC 1
ISO 22608:2004
Protective clothing -- Protection against liquid chemicals -- Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials 90.93 TC 94/SC 13
ISO 22609:2004
Clothing for protection against infectious agents -- Medical face masks -- Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected) 90.93 TC 94/SC 13
ISO 22610:2006
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment -- Test method to determine the resistance to wet bacterial penetration 90.92 TC 94/SC 13
ISO 22612:2005
Clothing for protection against infectious agents -- Test method for resistance to dry microbial penetration 90.93 TC 94/SC 13


13.340.20 Head protective equipment
Including helmets, eye-protectors, hearing protectors, ear muffs, teeth protectors and hoods.
13.340.30 Respiratory protective devices
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/DIS 16900-1
Respiratory protective devices -- Methods of test and test equipment -- Part 1: Determination of inward leakage 40.60 TC 94/SC 15
ISO/FDIS 16900-2
Respiratory protective devices -- Methods of test and test equipment -- Part 2: Determination of breathing resistance 50.20 TC 94/SC 15
ISO/DIS 16900-3
Respiratory protective devices -- Methods of test and test equipment -- Part 3: Determination of particle filter penetration 40.60 TC 94/SC 15
ISO/DIS 16900-4
Respiratory protective devices -- Methods of test and test equipment -- Part 4: Determination of gas filter capacity 40.60 TC 94/SC 15
ISO/CD 16900-9
Respiratory protective devices -- Methods of test and test equipment -- Part 9: Carbon dioxide content of the inhaled air (dead space) 30.20 TC 94/SC 15
ISO/NP 16900-11
Respiratory protective devices -- Methods of test and test equipment -- Part 11: Determination of field of vision 10.99 TC 94/SC 15
ISO/DIS 16972
Respiratory protective devices -- Terms, definitions, graphical symbols and units of measurement 40.60 TC 94/SC 15
ISO/CD TR 16974
Respiratory protective devices -- Marking and information 30.60 TC 94/SC 15
ISO/CD 16975
Respiratory protective devices -- Selection, use and maintenance 30.20 TC 94/SC 15
ISO/TS 16976-1:2007
Respiratory protective devices -- Human factors -- Part 1: Metabolic rates and respiratory flow rates 60.60 TC 94/SC 15
ISO/CD TS 16976-2
Respiratory protective devices -- Human factors -- Part 2: Anthropometrics 30.20 TC 94/SC 15
ISO/CD TS 16976-3
Respiratory protective devices -- Human factors -- Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment 30.60 TC 94/SC 15
ISO/NP TS 16976-4
Respiratory protective devices -- Human factors -- Part 4: Work of breathing and breathing resistance 10.99 TC 94/SC 15
ISO 23269-1:2008
Ships and marine technology -- Breathing apparatus for ships -- Part 1: Emergency escape breathing devices (EEBD) for shipboard use 60.60 TC 8/SC 1
ISO/CD 23269-2
Ships and marine technology -- Breathing apparatus for ships -- Part 2: Breathing apparatus for shipboard firefighters 30.99 TC 8/SC 1
ISO/CD 23269-3
Ships and marine technology -- Breathing apparatus for ships -- Part 3: Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes 30.99 TC 8/SC 1
ISO/DIS 23269-4
Ships and marine technology -- Breathing apparatus for ships -- Part 4: Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes 40.20 TC 8/SC 1

13.340.40 Hand and arm protection
Including protective gloves, sleeves and mits
Medical gloves, see 11.140
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 10819:1996
Mechanical vibration and shock -- Hand-arm vibration -- Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand 90.92 TC 108/SC 4
ISO/NP 10819
Mechanical vibration and shock -- Hand-arm vibration -- Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand 10.99 TC 108/SC 4
ISO 11393-4:2003
Protective clothing for users of hand-held chain-saws -- Part 4: Test methods and performance requirements for protective gloves 90.60 TC 94/SC 13
ISO 11933-2:1997
Components for containment enclosures -- Part 2: Gloves, welded bags, gaiters for remote - handling tongs and for manipulators 90.60 TC 85/SC 2
ISO 13999-1:1999
Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 1: Chain-mail gloves and arm guards 90.93 TC 94/SC 13
ISO 13999-2:2003
Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 2: Gloves and arm guards made of material other than chain mail 90.60 TC 94/SC 13
ISO 13999-3:2002
Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 3: Impact cut test for fabric, leather and other materials 90.93 TC 94/SC 13
ISO 15383:2001
Protective gloves for firefighters -- Laboratory test methods and performance requirements 90.60 TC 94/SC 14

13.340.50 Leg and foot protection
Including safety boots and shoes
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 2023:1994
Rubber footwear -- Lined industrial vulcanized-rubber boots -- Specification 90.93 TC 94/SC 3
ISO 2023:1994/Cor 1:2001
60.60 TC 94/SC 3
ISO 4643:1992
Moulded plastics footwear -- Lined or unlined poly(vinyl chloride) boots for general industrial use -- Specification 90.93 TC 94/SC 3
ISO 5423:1992
Moulded plastics footwear -- Lined or unlined polyurethane boots for general industrial use -- Specification 90.93 TC 94/SC 3
ISO 11393-3:1999
Protective clothing for users of hand-held chain-saws -- Part 3: Test methods for footwear 90.93 TC 94/SC 13
ISO 13287:2006
Personal protective equipment -- Footwear -- Test method for slip resistance 90.92 TC 94/SC 3
ISO 17249:2004
Safety footwear with resistance to chain saw cutting 90.93 TC 94/SC 3
ISO 17249:2004/Amd 1:2007
60.60 TC 94/SC 3
ISO/NP TR 18690
Guidance for the selection, use and maintenance of safety, protective and occupational footwear 10.99 TC 94/SC 3
ISO/TR 18690:2006
Guidance for the selection, use and maintenance of safety, protective and occupational footwear 90.92 TC 94/SC 3
ISO 20344:2004
Personal protective equipment -- Test methods for footwear 90.92 TC 94/SC 3
ISO/DIS 20344
Personal protective equipment -- Test methods for footwear 40.20 TC 94/SC 3
ISO 20344:2004/Amd 1:2007
60.60 TC 94/SC 3
ISO 20344:2004/Cor 1:2005
60.60 TC 94/SC 3
ISO 20345:2004
Personal protective equipment -- Safety footwear 90.92 TC 94/SC 3
ISO/DIS 20345
Personal protective equipment -- Safety footwear 40.20 TC 94/SC 3
ISO 20345:2004/Cor 1:2005
60.60 TC 94/SC 3
ISO 20345:2004/Amd 1:2007
60.60 TC 94/SC 3
ISO 20345:2004/Cor 2:2006
60.60 TC 94/SC 3
ISO 20346:2004
Personal protective equipment -- Protective footwear 90.92 TC 94/SC 3
ISO/DIS 20346
Personal protective equipment -- Protective footwear 40.20 TC 94/SC 3
ISO 20346:2004/Amd 1:2007
60.60 TC 94/SC 3
ISO 20346:2004/Cor 1:2005
60.60 TC 94/SC 3
ISO 20346:2004/Cor 2:2006
60.60 TC 94/SC 3
ISO/DIS 20347
Personal protective equipment -- Occupational footwear 40.20 TC 94/SC 3
ISO 20347:2004
Personal protective equipment -- Occupational footwear 90.92 TC 94/SC 3
ISO 20347:2004/Amd 1:2007
60.60 TC 94/SC 3
ISO 20347:2004/Cor 1:2005
60.60 TC 94/SC 3
ISO 20347:2004/Cor 2:2006
60.60 TC 94/SC 3
ISO/DIS 20349.2
Personal protective equipment -- Footwear protecting against molten metal splash -- Requirements and test methods 40.20 TC 94/SC 3

13.340.60 Protection against falling and slipping
Including safety ropes, harnesses and fall arrestors
Mountaineering equipment, see 97.220.40
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 10333-1:2000
Personal fall-arrest systems -- Part 1: Full-body harnesses 90.60 TC 94/SC 4
ISO 10333-1:2000/Amd 1:2002
60.60 TC 94/SC 4
ISO 10333-2:2000
Personal fall-arrest systems -- Part 2: Lanyards and energy absorbers 90.60 TC 94/SC 4
ISO 10333-3:2000
Personal fall-arrest systems -- Part 3: Self-retracting lifelines 90.60 TC 94/SC 4
ISO 10333-4:2002
Personal fall-arrest systems -- Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester 90.60 TC 94/SC 4
ISO 10333-5:2001
Personal fall-arrest systems -- Part 5: Connectors with self-closing and self-locking gates 90.60 TC 94/SC 4
ISO 10333-6:2004
Personal fall-arrest systems -- Part 6: System performance tests 90.60 TC 94/SC 4
ISO 14567:1999
Personal protective equipment for protection against falls from a height -- Single-point anchor devices 90.93 TC 94/SC 4
ISO 16024:2005
Personal protective equipment for protection against falls from a height -- Flexible horizontal lifeline systems 90.60 TC 94/SC 4
ISO 22159:2007
Personal equipment for protection against falls -- Descending devices 60.60 TC 94/SC 4
ISO 22846-1:2003
Personal equipment for protection against falls -- Rope access systems -- Part 1: Fundamental principles for a system of work 90.60 TC 94/SC 4
ISO/CD 22846-2
Personal equipment for protection against falls -- Rope access systems -- Part 2: Code of Practice 30.60 TC 94/SC 4

13.340.70 Lifejackets, buoyancy aids and flotation devices
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 12402-1:2005
Personal flotation devices -- Part 1: Lifejackets for seagoing ships -- Safety requirements 90.60 TC 188
ISO 12402-2:2006
Personal flotation devices -- Part 2: Lifejackets, performance level 275 -- Safety requirements 60.60 TC 188
ISO 12402-2:2006/DAmd 1
40.60 TC 188
ISO 12402-3:2006
Personal flotation devices -- Part 3: Lifejackets, performance level 150 -- Safety requirements 60.60 TC 188
ISO 12402-3:2006/DAmd 1
40.60 TC 188
ISO 12402-4:2006
Personal flotation devices -- Part 4: Lifejackets, performance level 100 -- Safety requirements 60.60 TC 188
ISO 12402-4:2006/DAmd 1
40.60 TC 188
ISO 12402-5:2006
Personal flotation devices -- Part 5: Buoyancy aids (level 50) -- Safety requirements 60.60 TC 188
ISO 12402-5:2006/DAmd 1
40.60 TC 188
ISO 12402-5:2006/Cor 1:2006
60.60 TC 188
ISO 12402-6:2006
Personal flotation devices -- Part 6: Special purpose lifejackets and buoyancy aids -- Safety requirements and additional test methods 60.60 TC 188
ISO 12402-6:2006/DAmd 1
40.60 TC 188
ISO 12402-7:2006
Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods 60.60 TC 188
ISO 12402-7:2006/DAmd 1
40.60 TC 188
ISO 12402-8:2006
Personal flotation devices -- Part 8: Accessories -- Safety requirements and test methods 90.20 TC 188
ISO 12402-8:2006/DAmd 1
40.60 TC 188
ISO 12402-9:2006
Personal flotation devices -- Part 9: Test methods 60.60 TC 188
ISO 12402-9:2006/DAmd 1
40.60 TC 188
ISO 12402-10:2006
Personal flotation devices -- Part 10: Selection and application of personal flotation devices and other relevant devices 90.20 TC 188

13.340.99 Other protective equipment
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 11810-1:2005
Lasers and laser-related equipment -- Test method and classification for the laser resistance of surgical drapes and/or patient protective covers -- Part 1: Primary ignition and penetration 90.93 TC 172/SC 9
ISO 11810-2:2007
Lasers and laser-related equipment -- Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers -- Part 2: Secondary ignition 60.60 TC 172/SC 9
ISO 13999-1:1999
Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 1: Chain-mail gloves and arm guards 90.93 TC 94/SC 13
ISO 13999-2:2003
Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 2: Gloves and arm guards made of material other than chain mail 90.60 TC 94/SC 13
ISO 13999-3:2002
Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 3: Impact cut test for fabric, leather and other materials 90.93 TC 94/SC 13






http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.