http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.
ISO 5413:1993
Machine tools -- Positive drive of Morse tapers 90.20 TC 29/SC 2
ISO 5414-1:2002
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 1:
Dimensions of the driving system of tool shanks 90.93 TC 29/SC 2
ISO 5414-2:2002
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 2:
Connecting dimensions of chucks and designation 90.93 TC 29/SC 2
ISO 5415:2007
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw 60.60 TC
29/SC 2
ISO 5734:1986
Acceptance conditions of mechanical dividing heads for machine tools -- Testing of accuracy
90.93 TC 39/SC 2
ISO 7388-1:2007
Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation
of shanks of forms A, AD, AF, U, UD and UF 60.60 TC 29
ISO 7388-2:2007
Tool shanks with 7/24 taper for automatic tool changers -- Part 2: Dimensions and designation
of shanks of forms J, JD and JF 60.60 TC 29
ISO 7388-3:2007
Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs for shanks
of forms AC, AD, AF, UC, UD, UF, JD and JF 60.60 TC 29
ISO 9270:1992
7/24 tapers for tool shanks for automatic changing -- Tapers for spindle noses 90.92 TC 29
ISO/DIS 9270-1
7/24 taper spindle noses for automatic tool changers -- Part 1: Dimensions and designation of
spindle noses of forms S and SF 40.60 TC 29
ISO/DIS 9270-2
7/24 taper spindle noses for automatic tool changers -- Part 2: Dimensions and designation of
spindle noses of forms J and JF 40.60 TC 29
ISO/CD 10649-1
Cutter arbors with parallel key and tenon drive -- Part 1: General dimensions 30.99 TC 29/SC 2
ISO/CD 10649-2
Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions of tool holders with
hollow taper interface 30.99 TC 29/SC 2
ISO/CD 10649-3
Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions of tool holders with 7/24
taper for automatic tool changers 30.99 TC 29/SC 2
ISO/CD 10649-4
Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions of tool holders with 7/24
taper for manuel tool changers 30.99 TC 29/SC 2
ISO 10889-1:2004
Tool holders with cylindrical shank -- Part 1: Cylindrical shank, location bore -- Technical
delivery conditions 90.93 TC 29
ISO 10889-2:2004
Tool holders with cylindrical shank -- Part 2: Type A, shanks for tool holders of special
designs 90.93 TC 29
ISO 10889-3:2004
Tool holders with cylindrical shank -- Part 3: Type B with rectangular radial seat 90.93 TC 29
ISO 10889-4:2004
Tool holders with cylindrical shank -- Part 4: Type C with rectangular axial seat 90.93 TC 29
ISO 10889-5:1997
Tool holders with cylindrical shank -- Part 5: Type D with more than one rectangular seat 90.60
TC 29
ISO 10889-6:2004
Tool holders with cylindrical shank -- Part 6: Type E with cylindrical seat 90.93 TC 29
ISO 10889-7:2004
Tool holders with cylindrical shank -- Part 7: Type F with taper seat 90.93 TC 29
ISO 10889-8:1997
Tool holders with cylindrical shank -- Part 8: Type Z, accessories 90.93 TC 29
ISO 10897:1996
Collets for tool holders with taper ratio 1:10 -- Collets, hoders,nuts 90.93 TC 29
ISO 12164-1:2001
Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions 90.93 TC 29
ISO 12164-2:2001
Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions 90.93 TC
29
ISO 12164-3:2008
Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for
stationary tools 60.60 TC 29
ISO 12164-4:2008
Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for
stationary tools 60.60 TC 29
ISO 15488:2003
Collets with 8 degree setting angle for tool shanks -- Collets, nuts and fitting dimensions
90.60 TC 29
ISO/FDIS 19719
Machine tools -- Work holding chucks -- Vocabulary 50.00 TC 39/SC 8
ISO 26622-1:2008
Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks
60.60 TC 29
ISO 26622-2:2008
Modular taper interface with ball track system -- Part 2: Dimensions and designation of
receivers 60.60 TC 29
ISO 26623-1:2008
Polygonal taper interface with flange contact surface -- Part 1: Dimensions and designation of
shanks 60.60 TC 29
ISO 26623-2:2008
Polygonal taper interface with flange contact surface -- Part 2: Dimensions and designation of
receivers 60.60 TC 29
25.060.99 Other machine tool systems
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 3408-1:2006
Ball screws -- Part 1: Vocabulary and designation 60.60 TC 39
ISO 3408-2:1991
Ball screws -- Part 2: Nominal diameters and nominal leads -- Metric series 90.60 TC 39
ISO 3408-3:2006
Ball screws -- Part 3: Acceptance conditions and acceptance tests 90.20 TC 39
ISO 3408-4:2006
Ball screws -- Part 4: Static axial rigidity 60.60 TC 39
ISO 3408-5:2006
Ball screws -- Part 5: Static and dynamic axial load ratings and operational life 60.60 TC 39
ISO 5169:1977
Machine tools -- Presentation of lubrication instructions 90.60 TC 39
ISO 5170:1977
Machine tools -- Lubrication systems 90.60 TC 39
ISO/FDIS 23848-1
Machine tools -- Ball splines -- Part 1: Characteristics, shapes and dimensions 50.00 TC 39
ISO/FDIS 23848-2
Machine tools -- Ball splines -- Part 2: Dynamic and static load ratings and rating life 50.00
TC 39
25.080 Machine tools
Woodworking machines, see 79.120.10
ICS Field
25.100.01 Cutting tools in general
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 237:1975
Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares 90.93
TC 29
ISO 513:2004
Classification and application of hard cutting materials for metal removal with defined cutting
edges -- Designation of the main groups and groups of application 90.93 TC 29/SC 9
ISO 883:1985
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions
90.93 TC 29/SC 9
ISO 1832:2004
Indexable inserts for cutting tools -- Designation 90.93 TC 29/SC 9
ISO 1832:2004/Cor 1:2005
60.60 TC 29/SC 9
ISO 3002-1:1982
Basic quantities in cutting and grinding -- Part 1: Geometry of the active part of cutting
tools -- General terms, reference systems, tool and working angles, chip breakers 90.93 TC 29
ISO 3002-1:1982/Amd 1:1992
60.60 TC 29
ISO 3002-2:1982
Basic quantities in cutting and grinding -- Part 2: Geometry of the active part of cutting
tools -- General conversion formulae to relate tool and working angles 90.60 TC 29
ISO 3002-3:1984
Basic quantities in cutting and grinding -- Part 3: Geometric and kinematic quantities in
cutting 90.60 TC 29
ISO 3002-4:1984
Basic quantities in cutting and grinding -- Part 4: Forces, energy, power 90.93 TC 29
ISO 3002-5:1989
Basic quantities in cutting and grinding -- Part 5: Basic terminology for grinding processes
using grinding wheels 90.93 TC 29
ISO 3286:1976
Single point cutting tools -- Corner radii 90.60 TC 29/SC 9
ISO 3364:1997
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole --
Dimensions 90.92 TC 29/SC 9
ISO 3365:1985
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions 90.60
TC 29/SC 9
ISO 4203:1978
Parallel shank tools -- Driving tenons and sockets -- Dimensions 90.93 TC 29/SC 2
ISO/DIS 5610-1
Tool holders with rectangular shank for indexable inserts -- Part 1: General survey,
correlation and determination of dimensions 40.60 TC 29/SC 9
ISO/DIS 5610-2
Tool holders with rectangular shank for indexable inserts -- Part 2: Style A 40.60 TC 29/SC 9
ISO/DIS 5610-3
Tool holders with rectangular shank for indexable inserts -- Part 3: Style B 40.60 TC 29/SC 9
ISO/DIS 5610-4
Tool holders with rectangular shank for indexable inserts -- Part 4: Style D 40.60 TC 29/SC 9
ISO/DIS 5610-5
Tool holders with rectangular shank for indexable inserts -- Part 5: Style F 40.60 TC 29/SC 9
ISO/DIS 5610-6
Tool holders with rectangular shank for indexable inserts -- Part 6: Style G 40.60 TC 29/SC 9
ISO/DIS 5610-7
Tool holders with rectangular shank for indexable inserts -- Part 7: Style J 40.60 TC 29/SC 9
ISO/DIS 5610-8
Tool holders with rectangular shank for indexable inserts -- Part 8: Style K 40.60 TC 29/SC 9
ISO/DIS 5610-9
Tool holders with rectangular shank for indexable inserts -- Part 9: Style L 40.60 TC 29/SC 9
ISO/DIS 5610-10
Tool holders with rectangular shank for indexable inserts -- Part 10: Style N 40.60 TC 29/SC 9
ISO/DIS 5610-11
Tool holders with rectangular shank for indexable inserts -- Part 11: Style R 40.60 TC 29/SC 9
ISO/DIS 5610-12
Tool holders with rectangular shank for indexable inserts -- Part 12: Style S 40.60 TC 29/SC 9
ISO/DIS 5610-13
Tool holders with rectangular shank for indexable inserts -- Part 13: Style T 40.60 TC 29/SC 9
ISO/DIS 5610-14
Tool holders with rectangular shank for indexable inserts -- Part 14: Style H 40.60 TC 29/SC 9
ISO/DIS 5610-15
Tool holders with rectangular shank for indexable inserts -- Part 15: Style V 40.60 TC 29/SC 9
ISO 5611:1995
Cartridges, type A, for indexable inserts -- Dimensions 90.93 TC 29/SC 9
ISO 6987:1998
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole --
Dimensions 90.60 TC 29/SC 9
ISO 9361-1:1991
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 1:
Dimensions of inserts without fixing hole 90.93 TC 29/SC 9
ISO 9361-2:1991
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 2:
Dimensions of inserts with cylindrical fixing hole 90.92 TC 29/SC 9
ISO/DIS 10643
Dimensions of accessories for cutting tools and their attachments 40.99 TC 29/SC 2
ISO 10910:1995
Classification and designation of approximate chip control zones for indexable inserts with
chipbreakers 90.93 TC 29/SC 9
ISO 11054:2006
Cutting tools -- Designation of high-speed steel groups 90.20 TC 29
ISO 13399-1:2006
Cutting tool data representation and exchange -- Part 1: Overview, fundamental principles and
general information model 90.20 TC 29
ISO 13399-1:2006/DAmd 1
40.60 TC 29
ISO 13399-1:2006/Cor 1:2008
60.60 TC 29
ISO/TS 13399-2:2005
Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting
items 90.92 TC 29
ISO/TS 13399-3:2007
Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items
90.92 TC 29
ISO/TS 13399-4:2007
Cutting tool data representation and exchange -- Part 4: Reference dictionary for adaptive
items 90.92 TC 29
ISO/TS 13399-5:2007
Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly
items 90.92 TC 29
ISO/TS 13399-50:2007
Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference
systems and common concepts 90.92 TC 29
ISO/TS 13399-60:2007
Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection
systems 90.92 TC 29
ISO/TS 13399-100:2008
Cutting tool data representation and exchange -- Part 100: Definitions, principles and methods
for reference dictionaries 60.60 TC 29
ISO/TS 13399-150:2008
Cutting tool data representation and exchange -- Part 150: Usage guidelines 60.60 TC 29
ISO 16462:2004
Cubic boron nitride inserts, tipped or solid -- Dimensions, types 90.93 TC 29/SC 9
ISO 16463:2004
Polycristalline diamond inserts, tipped -- Dimensions, types 90.93 TC 29/SC 9
25.100.10 Turning tools
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 241:1994
Shanks for turning and planing tools -- Shapes and dimensions of the section 90.93 TC 29/SC 9
ISO 242:1975
Carbide tips for brazing on turning tools 90.93 TC 29/SC 9
ISO 243:1975
Turning tools with carbide tips -- External tools 90.93 TC 29/SC 9
ISO 504:1975
Turning tools with carbide tips -- Designation and marking 90.93 TC 29/SC 9
ISO 514:1975
Turning tools with carbide tips -- Internal tools 90.93 TC 29/SC 9
ISO 3685:1993
Tool-life testing with single-point turning tools 90.20 TC 29
ISO 5421:1977
Ground high speed steel tool bits 90.93 TC 29
ISO 5608:1995
Turning and copying tool holders and cartridges for indexable inserts -- Designation 90.93 TC
29/SC 9
ISO 5609:1998
Boring bars for indexable inserts -- Dimensions 90.93 TC 29/SC 9
ISO 5610:1998
Single-point tool holders for turning and copying, for indexable inserts -- Dimensions 90.92 TC
29/SC 9
ISO/NP 6261
Boring bars (tool holders with cylindrical shank) for indexable inserts -- Designation 10.99 TC
29/SC 9
ISO 6261:1995
Boring bars (tool holders with cylindrical shank) for indexable inserts -- Designation 90.92 TC
29/SC 9
25.100.20 Milling tools
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 240:1994
Milling cutters -- Interchangeability dimensions for cutter arbors or cutter mandrels 90.93 TC
29/SC 2
ISO 1641-1:2003
End mills and slot drills -- Part 1: Milling cutters with cylindrical shanks 90.93 TC 29/SC 2
ISO 1641-2:1978
End mills and slot drills -- Part 2: Milling cutters with Morse taper shanks 90.92 TC 29/SC 2
ISO/DIS 1641-2
End mills and slot drills -- Part 2: Milling cutters with Morse taper shanks 40.99 TC 29/SC 2
ISO/DIS 1641-3
End mills and slot drills -- Part 3: Milling cutters with 7/24 taper shanks 40.99 TC 29/SC 2
ISO 1641-3:2003
End mills and slot drills -- Part 3: Milling cutters with 7/24 taper shanks 90.92 TC 29/SC 2
ISO 2584:1972
Cylindrical cutters with plain bore and key drive -- Metric series 90.93 TC 29/SC 2
ISO/DIS 2585
Slotting cutters with plain bore and key drive -- Metric series 40.99 TC 29/SC 2
ISO 2585:1972
Slotting cutters with plain bore and key drive -- Metric series 90.92 TC 29/SC 2
ISO 2586:1985
Shell end mills with plain bore and tenon drive -- Metric series 90.92 TC 29/SC 2
ISO/DIS 2586
Shell end mills with plain bore and tenon drive -- Metric series 40.99 TC 29/SC 2
ISO/DIS 2587
Side and face milling cutters with plain bore and key drive -- Metric series 40.99 TC 29/SC 2
ISO 2587:1972
Side and face milling cutters with plain bore and key drive -- Metric series 90.92 TC 29/SC 2
ISO 2780:2006
Milling cutters with tenon drive -- Interchangeability dimensions for cutter arbors -- Metric
series 60.60 TC 29/SC 2
ISO/DIS 2940-1
Milling cutters mounted on centring arbors having a 7/24 taper -- Part 1: Fitting dimensions of
centring arbors 40.99 TC 29/SC 2
ISO 2940-1:1974
Milling cutters mounted on centring arbors having a 7/24 taper -- Fitting dimensions --
Centring arbors 90.92 TC 29/SC 2
ISO 2940-2:1974
Milling cutters mounted on centring arbors having a 7/24 taper -- Inserted tooth cutters 90.92
TC 29/SC 2
ISO/DIS 2940-2
Milling cutters mounted on centring arbors having a 7/24 taper -- Part 2: Inserted tooth
cutters 40.99 TC 29/SC 2
ISO 3337:2000
T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole 90.93 TC
29/SC 2
ISO 3338-1:1996
Cylindrical shanks for milling cutters -- Part 1: Dimensional characteristics of plain
cylindrical shanks 90.93 TC 29/SC 2
ISO 3338-2:2007
Cylindrical shanks for milling cutters -- Part 2: Dimensional characteristics of flatted
cylindrical shanks 60.60 TC 29/SC 2
ISO 3338-3:1996
Cylindrical shanks for milling cutters -- Part 3: Dimensional characteristics of threaded
shanks 90.93 TC 29/SC 2
ISO 3855:1977
Milling cutters -- Nomenclature 90.93 TC 29/SC 2
ISO 3855:1977/Cor 1:1996
60.60 TC 29/SC 2
ISO 3859:2000
Inverse dovetail cutters and dovetail cutters with cylindrical shanks 90.93 TC 29/SC 2
ISO 3860:1976
Bore cutters with key drive -- Form milling cutters with constant profile 90.92 TC 29/SC 2
ISO/DIS 3860
Bore cutters with key drive -- Form milling cutters with constant profile 40.99 TC 29/SC 2
ISO 3940:1977
Tapered die-sinking cutters with parallel shanks 90.93 TC 29/SC 2
ISO 6108:1978
Double equal angle cutters with plain bore and key drive 90.92 TC 29/SC 2
ISO/DIS 6108
Double equal angle cutters with plain bore and key drive 40.99 TC 29/SC 2
ISO 6262-1:1982
End mills with indexable inserts -- Part 1: End mills with flatted parallel shank 90.93 TC
29/SC 9
ISO 6262-2:1982
End mills with indexable inserts -- Part 2: End mills with Morse taper shank 90.93 TC 29/SC 9
ISO/DIS 6462
Face and shoulder milling cutters with indexable inserts -- Dimensions 40.20 TC 29/SC 9
ISO 6462:1983
Face milling cutters with indexable inserts -- Dimensions 90.92 TC 29/SC 9
ISO 6986:1983
Side and face milling (slotting) cutters with indexable inserts -- Dimensions 90.93 TC 29/SC 9
ISO 7755-1:1984
Hardmetal burrs -- Part 1: General specifications 90.93 TC 29/SC 9
ISO 7755-2:1984
Hardmetal burrs -- Part 2: Cylindrical burrs (style A) 90.93 TC 29/SC 9
ISO 7755-3:1984
Hardmetal burrs -- Part 3: Cylindrical round- (ball-) nose burrs (style C) 90.93 TC 29/SC 9
ISO 7755-4:1984
Hardmetal burrs -- Part 4: Spherical burrs (style D) 90.93 TC 29/SC 9
ISO 7755-5:1984
Hardmetal burrs -- Part 5: Oval burrs (style E) 90.93 TC 29/SC 9
ISO 7755-6:1984
Hardmetal burrs -- Part 6: Arch round- (ball-) nose burrs (style F) 90.93 TC 29/SC 9
ISO 7755-7:1984
Hardmetal burrs -- Part 7: Arch pointed-nose burrs (style G) 90.93 TC 29/SC 9
ISO 7755-8:1984
Hardmetal burrs -- Part 8: Flame burrs (style H) 90.93 TC 29/SC 9
ISO 7755-9:1984
Hardmetal burrs -- Part 9: 60 degrees and 90 degrees cone burrs (styles J and K) 90.93 TC 29/SC
9
ISO 7755-10:1984
Hardmetal burrs -- Part 10: Conical round- (ball-) nose burrs (style L) 90.93 TC 29/SC 9
ISO 7755-11:1984
Hardmetal burrs -- Part 11: Conical pointed-nose burrs (style M) 90.93 TC 29/SC 9
ISO 7755-12:1984
Hardmetal burrs -- Part 12: Inverted cone burrs (style N) 90.93 TC 29/SC 9
ISO 8688-1:1989
Tool life testing in milling -- Part 1: Face milling 90.93 TC 29
ISO 8688-2:1989
Tool life testing in milling -- Part 2: End milling 90.93 TC 29
ISO 10145-1:1993
End mills with brazed helical hardmetal tips -- Part 1: Dimensions of end mills with parallel
shank 90.60 TC 29/SC 9
ISO 10145-2:1993
End mills with brazed helical hardmetal tips -- Part 2: Dimensions of end mills with 7/24 taper
shank 90.60 TC 29/SC 9
ISO/DIS 10911
Solid hardmetal end mills with cylindrical shank -- Dimensions 40.99 TC 29/SC 9
ISO 10911:1994
Solid hardmetal end mills with parallel shank -- Dimensions 90.92 TC 29/SC 9
ISO 11529-1:2005
Milling cutters -- Designation -- Part 1: Shank-type end mills of solid or tipped design 90.60
TC 29/SC 9
ISO 11529-2:2005
Milling cutters -- Designation -- Part 2: Shank-type and bore-type milling cutters with
indexable inserts 90.60 TC 29/SC 9
ISO 12197:1996
Woodruff keaseat cutters -- Dimensions 90.93 TC 29/SC 2
ISO 15641:2001
Milling cutters for high speed machining -- Safety requirements 90.93 TC 29
ISO 15917:2007
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials --
Dimensions 60.60 TC 29/SC 9
ISO 22037:2007
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials --
Dimensions 60.60 TC 29/SC 9
25.100.25 Tools for planing and broaching machines
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 241:1994
Shanks for turning and planing tools -- Shapes and dimensions of the section 90.93 TC 29/SC 9
25.100.30 Drills, countersinks, reamers
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 235:1980
Parallel shank jobber and stub series drills and Morse taper shank drills 90.93 TC 29/SC 2
ISO 235:1980/Cor 1:1996
60.60 TC 29/SC 2
ISO 236-1:1976
Hand reamers 90.93 TC 29/SC 2
ISO 236-2:1976
Long fluted machine reamers, Morse taper shanks 90.93 TC 29/SC 2
ISO 239:1999
Drill chuck tapers 90.93 TC 29
ISO 494:2009
Cylindrical shank twist drills -- Long series 60.60 TC 29/SC 2
ISO 521:1975
Machine chucking reamers with parallel shanks or Morse taper shanks 90.92 TC 29/SC 2
ISO/DIS 521
Machine chucking reamers with parallel shanks or Morse taper shanks 40.99 TC 29/SC 2
ISO 522:1975
Special tolerances for reamers 90.93 TC 29/SC 2
ISO 866:1975
Centre drills for centre holes without protecting chamfers -- Type A 90.93 TC 29/SC 2
ISO/DIS 2238
Machine bridge reamers 40.99 TC 29/SC 2
ISO 2238:1972
Machine bridge reamers 90.92 TC 29/SC 2
ISO 2250:2009
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
60.60 TC 29/SC 2
ISO 2306:1972
Drills for use prior to tapping screw threads 90.92 TC 29/SC 2
ISO/DIS 2306
Drills for use prior to tapping screw threads 40.99 TC 29/SC 2
ISO/DIS 2402
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for
shell reamers 40.99 TC 29/SC 2
ISO 2402:1972
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for
shell reamers 90.92 TC 29/SC 2
ISO 2540:1973
Centre drills for centre holes with protecting chamfer -- Type B 90.93 TC 29/SC 2
ISO 2541:1972
Centre drills for centre holes with radius form -- Type R 90.93 TC 29/SC 2
ISO 3291:1995
Extra-long Morse taper shank twist drills 90.93 TC 29/SC 2
ISO 3292:1995
Extra-long parallel shank twist drills 90.93 TC 29/SC 2
ISO 3293:1975
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
90.93 TC 29/SC 2
ISO 3294:1975
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive 90.93 TC 29/SC 2
ISO 3314:1975
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive 90.92 TC 29/SC 2
ISO/DIS 3314
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive 40.99 TC 29/SC 2
ISO 3438:2003
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads 90.60 TC
29/SC 2
ISO 3439:2003
Subland twist drills with cylindrical shanks for holes prior to tapping screw threads 90.60 TC
29/SC 2
ISO/DIS 3465
Hand taper pin reamers 40.99 TC 29/SC 2
ISO 3465:1975
Hand taper pin reamers 90.92 TC 29/SC 2
ISO 3466:1975
Machine taper pin reamers with parallel shanks 90.92 TC 29/SC 2
ISO/DIS 3466
Machine taper pin reamers with parallel shanks 40.99 TC 29/SC 2
ISO/DIS 3467
Machine taper pin reamers with Morse taper shanks 40.99 TC 29/SC 2
ISO 3467:1975
Machine taper pin reamers with Morse taper shanks 90.92 TC 29/SC 2
ISO 4204:1977
Countersinks, 90 degrees, with Morse taper shanks and detachable pilots 90.93 TC 29/SC 2
ISO 4205:1991
Countersinks, 90 degrees, with parallel shanks and solid pilots 90.93 TC 29/SC 2
ISO 4206:1991
Counterbores with parallel shanks and solid pilots 90.93 TC 29/SC 2
ISO 4208:1977
Detachable pilots for use with counterbores and 90 degrees countersinks -- Dimensions 90.93 TC
29/SC 2
ISO 5419:1982
Twist drills -- Terms, definitions and types 90.93 TC 29/SC 2
ISO 5419:1982/Cor 1:1996
60.60 TC 29/SC 2
ISO 5420:1983
Reamers -- Terms, definitions and types 90.93 TC 29/SC 2
ISO 5468:2006
Rotary and rotary impact masonry drill bits with hardmetal tips -- Dimensions 90.20 TC 29/SC 2
ISO 7079:1981
Core drills with parallel shanks and with Morse taper shanks 90.93 TC 29/SC 2
ISO 9766:1990
Drills with indexable inserts -- Cylindrical shanks with a parallel flat 90.93 TC 29/SC 9
ISO 10887:1999
Key type three-jaw drill chucks -- Specification 90.93 TC 29
ISO 10888:1999
Keyless type three-jaw drill chucks -- Specification 90.93 TC 29
ISO 10898:1992
Spot drills 90.93 TC 29/SC 2
ISO 10899:1996
High-speed steel two-flute twist drills -- Technical specifications 90.93 TC 29/SC 2
25.100.40 Saws
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 2296:1972
Metal slitting saws with fine and coarse teeth -- Metric series 90.92 TC 29/SC 2
ISO/DIS 2296
Metal slitting saws with fine and coarse teeth -- Metric series 40.99 TC 29/SC 2
ISO 2336-1:1996
Hacksaw blades -- Part 1: Dimensions for hand blades 90.93 TC 29
ISO 2336-2:2006
Hacksaw blades -- Part 2: Dimensions for machine blades 60.60 TC 29
ISO 2924:1973
Solid and segmental circular saws for cold cutting of metals -- Interchangeability dimensions
of the drive -- Saw diameter range 224 to 2 240 mm 90.93 TC 29
ISO 4875-1:2006
Metal-cutting band saw blades -- Part 1: Vocabulary 60.60 TC 29
ISO 4875-2:2006
Metal-cutting band saw blades -- Part 2: Characteristics and dimensions 60.60 TC 29
25.100.50 Taps and threading dies
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 529:1993
Short machine taps and hand taps 90.20 TC 29/SC 2
ISO 2283:2000
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in -- Reduced shank taps
90.93 TC 29/SC 2
ISO 2284:1987
Hand taps for parallel and taper pipe threads -- General dimensions and marking 90.20 TC 29/SC
2
ISO 2568:1988
Hand- and machine-operated circular screwing dies and hand-operated die stocks 90.93 TC 29/SC 2
ISO 2857:1973
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine
pitches -- Manufacturing tolerances on the threaded portion 90.93 TC 29/SC 2
ISO 2857:1973/Amd 1:1984
60.60 TC 29/SC 2
ISO 2857:1973/Cor 1:1990
60.60 TC 29/SC 2
ISO 2857:1973/Amd 2:1986
60.60 TC 29/SC 2
ISO 4230:1987
Hand- and machine-operated circular screwing dies for taper pipe threads -- R series 90.20 TC
29/SC 2
ISO 4231:1987
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series 90.20 TC
29/SC 2
ISO 5396:1977
Hardmetal heading dies -- Terminology 90.93 TC 29
ISO 5407:1981
As-sintered hardmetal pellets used in heading dies -- Dimensions and tolerances 90.93 TC 29
ISO 5967:1981
Taps and thread cutting -- Nomenclature of the main types and terminology 90.20 TC 29/SC 2
ISO 5968:1981
Circular screwing dies -- Terminology 90.93 TC 29/SC 2
ISO 5969:1979
Ground thread taps for pipe threads G series and Rp series -- Tolerances on the threaded
portion 90.93 TC 29/SC 2
ISO 5969:1979/Cor 1:1991
60.60 TC 29/SC 2
ISO 7226:1988
Hexagonal dienuts 90.93 TC 29/SC 2
ISO 8051:1999
Long shank taps with nominal diameters from M3 to M10 -- Full-diameter shank taps with recess
90.93 TC 29/SC 2
ISO 8830:1991
High-speed steel machine taps with ground threads -- Technical specifications 90.93 TC 29/SC 2
25.100.60 Files
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 234-1:1983
Files and rasps -- Part 1: Dimensions 90.93 TC 29
ISO 234-2:1982
Files and rasps -- Part 2: Characteristics of cut 90.93 TC 29
25.100.70 Abrasives
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 525:1999
Bonded abrasive products -- General requirements 90.20 TC 29/SC 5
ISO/NP 525
Bonded abrasive products -- General requirements 10.99 TC 29/SC 5
ISO 603-1:1999
Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for external cylindrical
grinding between centres 90.20 TC 29/SC 5
ISO 603-1:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-2:1999
Bonded abrasive products -- Dimensions -- Part 2: Grinding wheels for centreless external
cylindrical grinding 90.20 TC 29/SC 5
ISO 603-2:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-3:1999
Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for internal cylindrical
grinding 90.20 TC 29/SC 5
ISO 603-3:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-4:1999
Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for surface
grinding/peripheral grinding 90.20 TC 29/SC 5
ISO 603-4:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-5:1999
Bonded abrasive products -- Dimensions -- Part 5: Grinding wheels for surface grinding/face
grinding 90.20 TC 29/SC 5
ISO 603-5:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-6:1999
Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room
grinding 90.20 TC 29/SC 5
ISO 603-6:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-7:1999
Bonded abrasive products -- Dimensions -- Part 7: Grinding wheels for manually guided grinding
90.20 TC 29/SC 5
ISO 603-7:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-8:1999
Bonded abrasive products -- Dimensions -- Part 8: Grinding wheels for deburring and
fettling/snagging 90.20 TC 29/SC 5
ISO 603-8:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-9:1999
Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for high-pressure grinding
90.20 TC 29/SC 5
ISO 603-9:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-10:1999
Bonded abrasive products -- Dimensions -- Part 10: Stones for honing and superfinishings 90.20
TC 29/SC 5
ISO 603-10:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-11:1999
Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks 90.20 TC 29/SC 5
ISO 603-11:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-12:1999
Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling
on a straight grinder 90.20 TC 29/SC 5
ISO 603-12:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-13:1999
Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling
on a vertical grinder 90.20 TC 29/SC 5
ISO 603-13:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-14:1999
Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for deburring and
fettling/snagging on an angle grinder 90.20 TC 29/SC 5
ISO 603-14:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-15:1999
Bonded abrasive products -- Dimensions -- Part 15: Grinding wheels for cutting-off on
stationary or mobile cutting-off machines 90.20 TC 29/SC 5
ISO 603-15:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-16:1999
Bonded abrasive produtcs -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held
power tools 90.20 TC 29/SC 5
ISO 603-16:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO/NP 603-17
Bonded abrasive products -- Dimensions -- Part 17: Mounted wheels 10.99 TC 29/SC 5
ISO 666:2006
Machine tools -- Mounting of grinding wheels by means of hub flanges 90.20 TC 29/SC 5
ISO 2421:2003
Coated abrasives -- Cylindrical sleeves 90.93 TC 29/SC 5
ISO 2976:2005
Coated abrasives -- Abrasive belts -- Selection of width/length combinations 90.93 TC 29/SC 5
ISO 3366:1999
Coated abrasives -- Abrasive rolls 90.20 TC 29/SC 5
ISO 3919:2005
Coated abrasives -- Flap wheels with shaft 90.60 TC 29/SC 5
ISO 5429:2005
Coated abrasives -- Flap wheels with incorporated flanges or separate flanges 90.60 TC 29/SC 5
ISO 6103:2005
Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Static
testing 90.60 TC 29/SC 5
ISO 6104:2005
Superabrasive products -- Rotating grinding tools with diamond or cubic boron nitride --
General survey, designation and multilingual nomenclature 90.93 TC 29/SC 5
ISO 6106:2005
Abrasive products -- Checking the grit size of superabrasives 90.60 TC 29/SC 5
ISO 6344-1:1998
Coated abrasives -- Grain size analysis -- Part 1: Grain size distribution test 90.93 TC 29/SC
5
ISO 6344-2:1998
Coated abrasives -- Grain size analysis -- Part 2: Determination of grain size distribution of
macrogrits P12 to P220 90.93 TC 29/SC 5
ISO 6344-3:1998
Coated abrasives -- Grain size analysis -- Part 3: Determination of grain size distribution of
microgrits P240 to P2500 90.92 TC 29/SC 5
ISO 6344-3:1998/Cor 1:1999
90.92 TC 29/SC 5
ISO 8486-1:1996
Bonded abrasives -- Determination and designation of grain size distribution -- Part 1:
Macrogrits F4 to F220 90.93 TC 29/SC 5
ISO 8486-2:2007
Bonded abrasives -- Determination and designation of grain size distribution -- Part 2:
Microgrits F230 to F2000 60.60 TC 29/SC 5
ISO 9136-1:2004
Abrasive grains -- Determination of bulk density -- Part 1: Macrogrits 90.93 TC 29/SC 5
ISO 9136-2:1999
Abrasive grains -- Determination of bulk density -- Part 2: Microgrits 90.20 TC 29/SC 5
ISO 9138:1993
Abrasive grains -- Sampling and splitting 90.93 TC 29/SC 5
ISO 9284:1992
Abrasive grains -- Test-sieving machines 90.93 TC 29/SC 5
ISO 9285:1997
Abrasive grains and crude -- Chemical analysis of fused aluminium oxide 90.93 TC 29/SC 5
ISO 9286:1997
Abrasive grains and crude -- Chemical analysis of silicon carbide 90.93 TC 29/SC 5
ISO 13942:2000
Bonded abrasive products -- Limit deviations and run-out tolerances 90.93 TC 29/SC 5
ISO 15635:2001
Coated abrasives -- Flap discs 90.93 TC 29/SC 5
ISO 15636:2003
Back-up pads for vulcanized fibre discs 90.93 TC 29/SC 5
ISO 15637-1:2002
Holding fixtures of cylindrical abrasive sleeves -- Part 1: Holding fixtures with shank for
hand-held grinding machines 90.93 TC 29/SC 5
ISO 15637-2:2002
Holding fixtures of cylindrical abrasive sleeves -- Part 2: Holding fixtures for stationary
machines 90.93 TC 29/SC 5
ISO 16057:2002
Coated abrasives -- Vulcanized fibre discs 60.60 TC 29/SC 5
ISO 21537-1:2004
Clamping flanges for superabrasive cutting-off wheels -- Part 1: Natural stone 90.93 TC 29/SC 5
ISO 21537-2:2004
Clamping flanges for superabrasive cutting-off wheels -- Part 2: Building and construction
90.93 TC 29/SC 5
ISO 21538:2004
Blanks for superabrasive cutting-off wheels -- Mounting and fixing bores -- Building
construction and civil engineering 90.93 TC 29/SC 5
ISO 21948:2001
Coated abrasives -- Plain sheets 90.93 TC 29/SC 5
ISO 21949:2001
Coated abrasives -- Plain sheets with holes for dust extraction 90.93 TC 29/SC 5
ISO 21950:2001
Coated abrasives -- Plain discs 90.93 TC 29/SC 5
ISO 21951:2001
Coated abrasives -- Plain discs with holes for dust extraction 90.93 TC 29/SC 5
ISO 22917:2004
Superabrasives -- Limit deviations and run-out tolerances for grinding wheels with diamond or
cubic boron nitride 90.93 TC 29/SC 5
ISO/TR 24857:2006
Synthetic industrial diamond grit products -- Single-particle compressive failure strength --
"DiaTest-SI" system 60.60 TC 29/SC 5
25.100.99 Other cutting tools
25.100 Cutting tools
Including industrial diamonds
Woodworking tools, see 79.120.20
ICS Field
25.100.01 Cutting tools in general
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 237:1975
Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares 90.93
TC 29
ISO 513:2004
Classification and application of hard cutting materials for metal removal with defined cutting
edges -- Designation of the main groups and groups of application 90.93 TC 29/SC 9
ISO 883:1985
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions
90.93 TC 29/SC 9
ISO 1832:2004
Indexable inserts for cutting tools -- Designation 90.93 TC 29/SC 9
ISO 1832:2004/Cor 1:2005
60.60 TC 29/SC 9
ISO 3002-1:1982
Basic quantities in cutting and grinding -- Part 1: Geometry of the active part of cutting
tools -- General terms, reference systems, tool and working angles, chip breakers 90.93 TC 29
ISO 3002-1:1982/Amd 1:1992
60.60 TC 29
ISO 3002-2:1982
Basic quantities in cutting and grinding -- Part 2: Geometry of the active part of cutting
tools -- General conversion formulae to relate tool and working angles 90.60 TC 29
ISO 3002-3:1984
Basic quantities in cutting and grinding -- Part 3: Geometric and kinematic quantities in
cutting 90.60 TC 29
ISO 3002-4:1984
Basic quantities in cutting and grinding -- Part 4: Forces, energy, power 90.93 TC 29
ISO 3002-5:1989
Basic quantities in cutting and grinding -- Part 5: Basic terminology for grinding processes
using grinding wheels 90.93 TC 29
ISO 3286:1976
Single point cutting tools -- Corner radii 90.60 TC 29/SC 9
ISO 3364:1997
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole --
Dimensions 90.92 TC 29/SC 9
ISO 3365:1985
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions 90.60
TC 29/SC 9
ISO 4203:1978
Parallel shank tools -- Driving tenons and sockets -- Dimensions 90.93 TC 29/SC 2
ISO/DIS 5610-1
Tool holders with rectangular shank for indexable inserts -- Part 1: General survey,
correlation and determination of dimensions 40.60 TC 29/SC 9
ISO/DIS 5610-2
Tool holders with rectangular shank for indexable inserts -- Part 2: Style A 40.60 TC 29/SC 9
ISO/DIS 5610-3
Tool holders with rectangular shank for indexable inserts -- Part 3: Style B 40.60 TC 29/SC 9
ISO/DIS 5610-4
Tool holders with rectangular shank for indexable inserts -- Part 4: Style D 40.60 TC 29/SC 9
ISO/DIS 5610-5
Tool holders with rectangular shank for indexable inserts -- Part 5: Style F 40.60 TC 29/SC 9
ISO/DIS 5610-6
Tool holders with rectangular shank for indexable inserts -- Part 6: Style G 40.60 TC 29/SC 9
ISO/DIS 5610-7
Tool holders with rectangular shank for indexable inserts -- Part 7: Style J 40.60 TC 29/SC 9
ISO/DIS 5610-8
Tool holders with rectangular shank for indexable inserts -- Part 8: Style K 40.60 TC 29/SC 9
ISO/DIS 5610-9
Tool holders with rectangular shank for indexable inserts -- Part 9: Style L 40.60 TC 29/SC 9
ISO/DIS 5610-10
Tool holders with rectangular shank for indexable inserts -- Part 10: Style N 40.60 TC 29/SC 9
ISO/DIS 5610-11
Tool holders with rectangular shank for indexable inserts -- Part 11: Style R 40.60 TC 29/SC 9
ISO/DIS 5610-12
Tool holders with rectangular shank for indexable inserts -- Part 12: Style S 40.60 TC 29/SC 9
ISO/DIS 5610-13
Tool holders with rectangular shank for indexable inserts -- Part 13: Style T 40.60 TC 29/SC 9
ISO/DIS 5610-14
Tool holders with rectangular shank for indexable inserts -- Part 14: Style H 40.60 TC 29/SC 9
ISO/DIS 5610-15
Tool holders with rectangular shank for indexable inserts -- Part 15: Style V 40.60 TC 29/SC 9
ISO 5611:1995
Cartridges, type A, for indexable inserts -- Dimensions 90.93 TC 29/SC 9
ISO 6987:1998
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole --
Dimensions 90.60 TC 29/SC 9
ISO 9361-1:1991
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 1:
Dimensions of inserts without fixing hole 90.93 TC 29/SC 9
ISO 9361-2:1991
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 2:
Dimensions of inserts with cylindrical fixing hole 90.92 TC 29/SC 9
ISO/DIS 10643
Dimensions of accessories for cutting tools and their attachments 40.99 TC 29/SC 2
ISO 10910:1995
Classification and designation of approximate chip control zones for indexable inserts with
chipbreakers 90.93 TC 29/SC 9
ISO 11054:2006
Cutting tools -- Designation of high-speed steel groups 90.20 TC 29
ISO 13399-1:2006
Cutting tool data representation and exchange -- Part 1: Overview, fundamental principles and
general information model 90.20 TC 29
ISO 13399-1:2006/DAmd 1
40.60 TC 29
ISO 13399-1:2006/Cor 1:2008
60.60 TC 29
ISO/TS 13399-2:2005
Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting
items 90.92 TC 29
ISO/TS 13399-3:2007
Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items
90.92 TC 29
ISO/TS 13399-4:2007
Cutting tool data representation and exchange -- Part 4: Reference dictionary for adaptive
items 90.92 TC 29
ISO/TS 13399-5:2007
Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly
items 90.92 TC 29
ISO/TS 13399-50:2007
Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference
systems and common concepts 90.92 TC 29
ISO/TS 13399-60:2007
Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection
systems 90.92 TC 29
ISO/TS 13399-100:2008
Cutting tool data representation and exchange -- Part 100: Definitions, principles and methods
for reference dictionaries 60.60 TC 29
ISO/TS 13399-150:2008
Cutting tool data representation and exchange -- Part 150: Usage guidelines 60.60 TC 29
ISO 16462:2004
Cubic boron nitride inserts, tipped or solid -- Dimensions, types 90.93 TC 29/SC 9
ISO 16463:2004
Polycristalline diamond inserts, tipped -- Dimensions, types 90.93 TC 29/SC 9
25.100.10 Turning tools
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 241:1994
Shanks for turning and planing tools -- Shapes and dimensions of the section 90.93 TC 29/SC 9
ISO 242:1975
Carbide tips for brazing on turning tools 90.93 TC 29/SC 9
ISO 243:1975
Turning tools with carbide tips -- External tools 90.93 TC 29/SC 9
ISO 504:1975
Turning tools with carbide tips -- Designation and marking 90.93 TC 29/SC 9
ISO 514:1975
Turning tools with carbide tips -- Internal tools 90.93 TC 29/SC 9
ISO 3685:1993
Tool-life testing with single-point turning tools 90.20 TC 29
ISO 5421:1977
Ground high speed steel tool bits 90.93 TC 29
ISO 5608:1995
Turning and copying tool holders and cartridges for indexable inserts -- Designation 90.93 TC
29/SC 9
ISO 5609:1998
Boring bars for indexable inserts -- Dimensions 90.93 TC 29/SC 9
ISO 5610:1998
Single-point tool holders for turning and copying, for indexable inserts -- Dimensions 90.92 TC
29/SC 9
ISO/NP 6261
Boring bars (tool holders with cylindrical shank) for indexable inserts -- Designation 10.99 TC
29/SC 9
ISO 6261:1995
Boring bars (tool holders with cylindrical shank) for indexable inserts -- Designation 90.92 TC
29/SC 9
25.100.20 Milling tools
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 240:1994
Milling cutters -- Interchangeability dimensions for cutter arbors or cutter mandrels 90.93 TC
29/SC 2
ISO 1641-1:2003
End mills and slot drills -- Part 1: Milling cutters with cylindrical shanks 90.93 TC 29/SC 2
ISO 1641-2:1978
End mills and slot drills -- Part 2: Milling cutters with Morse taper shanks 90.92 TC 29/SC 2
ISO/DIS 1641-2
End mills and slot drills -- Part 2: Milling cutters with Morse taper shanks 40.99 TC 29/SC 2
ISO/DIS 1641-3
End mills and slot drills -- Part 3: Milling cutters with 7/24 taper shanks 40.99 TC 29/SC 2
ISO 1641-3:2003
End mills and slot drills -- Part 3: Milling cutters with 7/24 taper shanks 90.92 TC 29/SC 2
ISO 2584:1972
Cylindrical cutters with plain bore and key drive -- Metric series 90.93 TC 29/SC 2
ISO/DIS 2585
Slotting cutters with plain bore and key drive -- Metric series 40.99 TC 29/SC 2
ISO 2585:1972
Slotting cutters with plain bore and key drive -- Metric series 90.92 TC 29/SC 2
ISO 2586:1985
Shell end mills with plain bore and tenon drive -- Metric series 90.92 TC 29/SC 2
ISO/DIS 2586
Shell end mills with plain bore and tenon drive -- Metric series 40.99 TC 29/SC 2
ISO/DIS 2587
Side and face milling cutters with plain bore and key drive -- Metric series 40.99 TC 29/SC 2
ISO 2587:1972
Side and face milling cutters with plain bore and key drive -- Metric series 90.92 TC 29/SC 2
ISO 2780:2006
Milling cutters with tenon drive -- Interchangeability dimensions for cutter arbors -- Metric
series 60.60 TC 29/SC 2
ISO/DIS 2940-1
Milling cutters mounted on centring arbors having a 7/24 taper -- Part 1: Fitting dimensions of
centring arbors 40.99 TC 29/SC 2
ISO 2940-1:1974
Milling cutters mounted on centring arbors having a 7/24 taper -- Fitting dimensions --
Centring arbors 90.92 TC 29/SC 2
ISO 2940-2:1974
Milling cutters mounted on centring arbors having a 7/24 taper -- Inserted tooth cutters 90.92
TC 29/SC 2
ISO/DIS 2940-2
Milling cutters mounted on centring arbors having a 7/24 taper -- Part 2: Inserted tooth
cutters 40.99 TC 29/SC 2
ISO 3337:2000
T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole 90.93 TC
29/SC 2
ISO 3338-1:1996
Cylindrical shanks for milling cutters -- Part 1: Dimensional characteristics of plain
cylindrical shanks 90.93 TC 29/SC 2
ISO 3338-2:2007
Cylindrical shanks for milling cutters -- Part 2: Dimensional characteristics of flatted
cylindrical shanks 60.60 TC 29/SC 2
ISO 3338-3:1996
Cylindrical shanks for milling cutters -- Part 3: Dimensional characteristics of threaded
shanks 90.93 TC 29/SC 2
ISO 3855:1977
Milling cutters -- Nomenclature 90.93 TC 29/SC 2
ISO 3855:1977/Cor 1:1996
60.60 TC 29/SC 2
ISO 3859:2000
Inverse dovetail cutters and dovetail cutters with cylindrical shanks 90.93 TC 29/SC 2
ISO 3860:1976
Bore cutters with key drive -- Form milling cutters with constant profile 90.92 TC 29/SC 2
ISO/DIS 3860
Bore cutters with key drive -- Form milling cutters with constant profile 40.99 TC 29/SC 2
ISO 3940:1977
Tapered die-sinking cutters with parallel shanks 90.93 TC 29/SC 2
ISO 6108:1978
Double equal angle cutters with plain bore and key drive 90.92 TC 29/SC 2
ISO/DIS 6108
Double equal angle cutters with plain bore and key drive 40.99 TC 29/SC 2
ISO 6262-1:1982
End mills with indexable inserts -- Part 1: End mills with flatted parallel shank 90.93 TC
29/SC 9
ISO 6262-2:1982
End mills with indexable inserts -- Part 2: End mills with Morse taper shank 90.93 TC 29/SC 9
ISO/DIS 6462
Face and shoulder milling cutters with indexable inserts -- Dimensions 40.20 TC 29/SC 9
ISO 6462:1983
Face milling cutters with indexable inserts -- Dimensions 90.92 TC 29/SC 9
ISO 6986:1983
Side and face milling (slotting) cutters with indexable inserts -- Dimensions 90.93 TC 29/SC 9
ISO 7755-1:1984
Hardmetal burrs -- Part 1: General specifications 90.93 TC 29/SC 9
ISO 7755-2:1984
Hardmetal burrs -- Part 2: Cylindrical burrs (style A) 90.93 TC 29/SC 9
ISO 7755-3:1984
Hardmetal burrs -- Part 3: Cylindrical round- (ball-) nose burrs (style C) 90.93 TC 29/SC 9
ISO 7755-4:1984
Hardmetal burrs -- Part 4: Spherical burrs (style D) 90.93 TC 29/SC 9
ISO 7755-5:1984
Hardmetal burrs -- Part 5: Oval burrs (style E) 90.93 TC 29/SC 9
ISO 7755-6:1984
Hardmetal burrs -- Part 6: Arch round- (ball-) nose burrs (style F) 90.93 TC 29/SC 9
ISO 7755-7:1984
Hardmetal burrs -- Part 7: Arch pointed-nose burrs (style G) 90.93 TC 29/SC 9
ISO 7755-8:1984
Hardmetal burrs -- Part 8: Flame burrs (style H) 90.93 TC 29/SC 9
ISO 7755-9:1984
Hardmetal burrs -- Part 9: 60 degrees and 90 degrees cone burrs (styles J and K) 90.93 TC 29/SC
9
ISO 7755-10:1984
Hardmetal burrs -- Part 10: Conical round- (ball-) nose burrs (style L) 90.93 TC 29/SC 9
ISO 7755-11:1984
Hardmetal burrs -- Part 11: Conical pointed-nose burrs (style M) 90.93 TC 29/SC 9
ISO 7755-12:1984
Hardmetal burrs -- Part 12: Inverted cone burrs (style N) 90.93 TC 29/SC 9
ISO 8688-1:1989
Tool life testing in milling -- Part 1: Face milling 90.93 TC 29
ISO 8688-2:1989
Tool life testing in milling -- Part 2: End milling 90.93 TC 29
ISO 10145-1:1993
End mills with brazed helical hardmetal tips -- Part 1: Dimensions of end mills with parallel
shank 90.60 TC 29/SC 9
ISO 10145-2:1993
End mills with brazed helical hardmetal tips -- Part 2: Dimensions of end mills with 7/24 taper
shank 90.60 TC 29/SC 9
ISO/DIS 10911
Solid hardmetal end mills with cylindrical shank -- Dimensions 40.99 TC 29/SC 9
ISO 10911:1994
Solid hardmetal end mills with parallel shank -- Dimensions 90.92 TC 29/SC 9
ISO 11529-1:2005
Milling cutters -- Designation -- Part 1: Shank-type end mills of solid or tipped design 90.60
TC 29/SC 9
ISO 11529-2:2005
Milling cutters -- Designation -- Part 2: Shank-type and bore-type milling cutters with
indexable inserts 90.60 TC 29/SC 9
ISO 12197:1996
Woodruff keaseat cutters -- Dimensions 90.93 TC 29/SC 2
ISO 15641:2001
Milling cutters for high speed machining -- Safety requirements 90.93 TC 29
ISO 15917:2007
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials --
Dimensions 60.60 TC 29/SC 9
ISO 22037:2007
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials --
Dimensions 60.60 TC 29/SC 9
25.100.25 Tools for planing and broaching machines
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 241:1994
Shanks for turning and planing tools -- Shapes and dimensions of the section 90.93 TC 29/SC 9
25.100.30 Drills, countersinks, reamers
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 235:1980
Parallel shank jobber and stub series drills and Morse taper shank drills 90.93 TC 29/SC 2
ISO 235:1980/Cor 1:1996
60.60 TC 29/SC 2
ISO 236-1:1976
Hand reamers 90.93 TC 29/SC 2
ISO 236-2:1976
Long fluted machine reamers, Morse taper shanks 90.93 TC 29/SC 2
ISO 239:1999
Drill chuck tapers 90.93 TC 29
http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment