Lastest & Cheapest ISO Standards In PDF (31)

http://www.int-bizdirectory.com/standards.htm

ICS Field
77.020 Production of metals
ISO 197-5:1980
Copper and copper alloys -- Terms and definitions -- Part 5: Methods of processing and treatment 90.20 TC 26
ISO 3134-5:1981
Light metals and their alloys -- Terms and definitions -- Part 5: Methods of processing and treatment 90.92 TC 79

77.040 Testing of metals
77.040.01 Testing of metals in general
77.040.10 Mechanical testing of metals
Mechanical testing in general, see 19.060
Mechanical testing of welded joints, see 25.160.40
Standard and/or project TC
ISO/FDIS 148-1
Metallic materials -- Charpy pendulum impact test -- Part 1: Test method 50.20 TC 164/SC 4
ISO 148-1:2006
Metallic materials -- Charpy pendulum impact test -- Part 1: Test method 90.92 TC 164/SC 4
ISO 148-2:2008
Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines 60.60 TC 164/SC 4
ISO 148-3:2008
Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines 60.60 TC 164/SC 4
ISO 204:2009
Metallic materials -- Uniaxial creep testing in tension -- Method of test 60.60 TC 164/SC 1
ISO 376:2004
Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines 90.92 TC 164/SC 1
ISO/DIS 376
Metallic material -- Calibration of force-proving instruments used for the verification of uniaxial testing machines 40.20 TC 164/SC 1
ISO 377:1997
Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing 90.60 TC 17/SC 20
ISO 377:1997/Cor 1:1997
60.60 TC 17/SC 20
ISO 783:1999
Metallic materials -- Tensile testing at elevated temperature 90.92 TC 164/SC 1
ISO 946:1975
Grey cast iron -- Beam unnotched impact test 90.60 TC 25
ISO 1099:2006
Metallic materials -- Fatigue testing -- Axial force-controlled method 90.20 TC 164/SC 5
ISO 1143:1975
Metals -- Rotating bar bending fatigue testing 90.92 TC 164/SC 5
ISO/DIS 1143
Metallic materials -- Rotating bar bending fatigue testing 40.20 TC 164/SC 5
ISO/DIS 1352
Metallic materials -- Torque-controlled fatigue testing 40.20 TC 164/SC 5
ISO 1352:1977
Steel -- Torsional stress fatigue testing 90.92 TC 164/SC 5
ISO 2566-1:1984
Steel -- Conversion of elongation values -- Part 1: Carbon and low alloy steels 90.20 TC 17/SC 20
ISO 2566-2:1984
Steel -- Conversion of elongation values -- Part 2: Austenitic steels 90.20 TC 17/SC 20
ISO 2739:2006
Sintered metal bushes -- Determination of radial crushing strength 90.92 TC 119/SC 3
ISO 2740:2009
Sintered metal materials, excluding hardmetals -- Tensile test pieces 60.60 TC 119/SC 3
ISO 3312:1987
Sintered metal materials and hardmetals -- Determination of Young modulus 90.20 TC 119/SC 3
ISO 3325:1996
Sintered metal materials, excluding hardmetals -- Determination of transverse rupture strength 90.93 TC 119/SC 3
ISO 3325:1996/Amd 1:2001
Precision statement 60.60 TC 119/SC 3
ISO 3327:2009
Hardmetals -- Determination of transverse rupture strength 60.60 TC 119/SC 4
ISO 3738-1:1982
Hardmetals -- Rockwell hardness test (scale A) -- Part 1: Test method 90.93 TC 119/SC 4
ISO 3738-2:1988
Hardmetals -- Rockwell hardness test (scale A) -- Part 2: Preparation and calibration of standard test blocks 90.93 TC 119/SC 4
ISO 3785:2006
Metallic materials -- Designation of test specimen axes in relation to product texture 90.60 TC 164/SC 4
ISO 3878:1983
Hardmetals -- Vickers hardness test 90.93 TC 119/SC 4
ISO 3928:1999
Sintered metal materials, excluding hardmetals -- Fatigue test pieces 90.92 TC 119/SC 3
ISO 3995:1985
Metallic powders -- Determination of green strength by transverse rupture of rectangular compacts 90.60 TC 119/SC 2
ISO 4498:2005
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness and microhardness 90.93 TC 119/SC 3
ISO 4498-1:1990
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 1: Materials of essentially uniform section hardness 90.93 TC 119/SC 3
ISO 4498-2:1981
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen 90.93 TC 119/SC 3
ISO 4506:1979
Hardmetals -- Compression test 90.93 TC 119/SC 4
ISO 4507:2000
Sintered ferrous materials, carburized or carbonitrided -- Determination and verification of case-hardening depth by a micro-hardness test 90.93 TC 119/SC 3
ISO 4545-1:2005
Metallic materials -- Knoop hardness test -- Part 1: Test method 90.60 TC 164/SC 3
ISO 4545-2:2005
Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machines 90.60 TC 164/SC 3
ISO 4545-3:2005
Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks 90.60 TC 164/SC 3
ISO 4545-4:2005
Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values 90.60 TC 164/SC 3
ISO 4739:1985
Wrought copper and copper alloy products -- Selection and preparation of specimens and test pieces for mechanical testing 90.20 TC 26
ISO 4965:1979
Axial load fatigue testing machines -- Dynamic force calibration -- Strain gauge technique 90.92 TC 164/SC 5
ISO/CD 4965-1
Metallic materials -- Fatigue testing -- Uniaxial dynamic force calibration -- Part 1: Testing machine 30.00 TC 164/SC 5
ISO/CD 4965-2
Metallic materials -- Fatigue testing -- Uniaxial dynamic force calibration -- Part 2: Dynamic Calibration Device (DCD) instrumentation 30.00 TC 164/SC 5
ISO 5754:1978
Sintered metal materials, excluding hardmetals -- Unnotched impact test piece 90.20 TC 119/SC 3
ISO 6506-1:2005
Metallic materials -- Brinell hardness test -- Part 1: Test method 90.60 TC 164/SC 3
ISO 6506-2:2005
Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines 90.60 TC 164/SC 3
ISO 6506-3:2005
Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks 90.60 TC 164/SC 3
ISO 6506-4:2005
Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values 90.60 TC 164/SC 3
ISO 6507-1:2005
Metallic materials -- Vickers hardness test -- Part 1: Test method 90.60 TC 164/SC 3
ISO 6507-2:2005
Metallic materials -- Vickers hardness test -- Part 2: Verification and calibration of testing machines 90.60 TC 164/SC 3
ISO 6507-3:2005
Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks 90.60 TC 164/SC 3
ISO 6507-4:2005
Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness values 90.60 TC 164/SC 3
ISO 6508-1:2005
Metallic materials -- Rockwell hardness test -- Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) 90.60 TC 164/SC 3
ISO 6508-2:2005
Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) 90.60 TC 164/SC 3
ISO 6508-3:2005
Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) 90.60 TC 164/SC 3
ISO 6892:1998
Metallic materials -- Tensile testing at ambient temperature 90.92 TC 164/SC 1
ISO 6892-1
Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature 60.00 TC 164/SC 1
ISO/DIS 6892-2
Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature 40.20 TC 164/SC 1
ISO 7438:2005
Metallic materials -- Bend test 90.93 TC 164/SC 2
ISO 7500-1:2004
Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system 90.60 TC 164/SC 1
ISO 7500-1:2004/Cor 1:2008
60.60 TC 164/SC 1
ISO 7500-2:2006
Metallic materials -- Verification of static uniaxial testing machines -- Part 2: Tension creep testing machines -- Verification of the applied force 60.60 TC 164/SC 1
ISO 7799:1985
Metallic materials -- Sheet and strip 3 mm thick or less -- Reverse bend test 90.93 TC 164/SC 2
ISO 7800:2003
Metallic materials -- Wire -- Simple torsion test 90.92 TC 164/SC 2
ISO 7801:1984
Metallic materials -- Wire -- Reverse bend test 90.20 TC 164/SC 2
ISO 7802:1983
Metallic materials -- Wire -- Wrapping test 90.60 TC 164/SC 2
ISO 8491:1998
Metallic materials -- Tube (in full section) -- Bend test 90.93 TC 164/SC 2
ISO 8492:1998
Metallic materials -- Tube -- Flattening test 90.60 TC 164/SC 2
ISO 8493:1998
Metallic materials -- Tube -- Drift-expanding test 90.93 TC 164/SC 2
ISO 8494:1998
Metallic materials -- Tube -- Flanging test 90.60 TC 164/SC 2
ISO 8495:1998
Metallic materials -- Tube -- Ring-expanding test 90.60 TC 164/SC 2
ISO 8496:1998
Metallic materials -- Tube -- Ring tensile test 90.60 TC 164/SC 2
ISO/CD 9513
Metallic materials -- Calibration of extensometers used in uniaxial testing 30.60 TC 164/SC 1
ISO 9513:1999
Metallic materials -- Calibration of extensometers used in uniaxial testing 90.92 TC 164/SC 1
ISO 9649:1990
Metallic materials -- Wire -- Reverse torsion test 90.93 TC 164/SC 2
ISO/TR 10108:1989
Steel -- Conversion of hardness values to tensile strength values 60.60 TC 17/SC 20
ISO 10113:2006
Metallic materials -- Sheet and strip -- Determination of plastic strain ratio 90.20 TC 164/SC 2
ISO 10275:2007
Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent 60.60 TC 164/SC 2
ISO 11531:1994
Metallic materials -- Earing test 90.93 TC 164/SC 2
ISO 12004-1:2008
Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 1: Measurement and application of forming-limit diagrams in the press shop 60.60 TC 164/SC 2
ISO 12004-2:2008
Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 2: Determination of forming-limit curves in the laboratory 60.60 TC 164/SC 2
ISO 12106:2003
Metallic materials -- Fatigue testing -- Axial-strain-controlled method 90.60 TC 164/SC 5
ISO/CD 12107
Metallic materials -- Fatigue testing -- Statistical planning and analysis of data 30.99 TC 164/SC 5
ISO 12107:2003
Metallic materials -- Fatigue testing -- Statistical planning and analysis of data 90.92 TC 164/SC 5
ISO 12108:2002
Metallic materials -- Fatigue testing -- Fatigue crack growth method 90.92 TC 164/SC 5
ISO/NP 12108
Metallic materials -- Fatigue testing -- Fatigue crack growth method 10.99 TC 164/SC 5
ISO/DIS 12111
Metallic materials -- Fatigue testing -- Strain-controlled thermomechanical fatigue testing method 40.60 TC 164/SC 5
ISO 12135:2002
Metallic materials -- Unified method of test for the determination of quasistatic fracture toughness 90.93 TC 164/SC 4
ISO 12135:2002/Cor 1:2008
60.60 TC 164/SC 4
ISO/TR 12735-2:1996
Mechanical testing of metals -- Symbols used with their definitions -- Part 2: Recommendations for the development of symbols and definitions 60.60 TC 164
ISO 12737:2005
Metallic materials -- Determination of plane-strain fracture toughness 90.60 TC 164/SC 4
ISO/WD 13314
Metallic materials -- Sheet and strip -- Compression test of porous and cellular metals 20.20 TC 164/SC 2
ISO 14317:2006
Sintered metal materials excluding hardmetals -- Determination of compressive yield strength 60.60 TC 119/SC 3
ISO 14556:2000
Steel -- Charpy V-notch pendulum impact test -- Instrumented test method 90.93 TC 164/SC 4
ISO 14556:2000/Amd 1:2006
Annex D -- Instrumented Charpy V-notch pendulum impact test of sub-size test pieces 60.60 TC 164/SC 4
ISO 14577-1:2002
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method 90.60 TC 164/SC 3
ISO 14577-2:2002
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines 90.60 TC 164/SC 3
ISO 14577-3:2002
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks 90.60 TC 164/SC 3
ISO 14577-4:2007
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings 60.60 TC 164/SC 3
ISO/TR 14936:1998
Metallic materials -- Strain analysis report 60.60 TC 164/SC 2
ISO 15363:2000
Metallic materials -- Tube ring hydraulic pressure test 90.93 TC 164/SC 2
ISO/TR 15461:1997
Steel forgings -- Testing frequency, sampling conditions and test methods for mechanical tests 60.60 TC 17/SC 10
ISO 15579:2000
Metallic materials -- Tensile testing at low temperature 90.92 TC 164/SC 1
ISO 16630:2009
Metallic materials -- Sheet and strip -- Hole expanding test 60.60 TC 164/SC 2
ISO 18265:2003
Metallic materials -- Conversion of hardness values 90.92 TC 164/SC 3
ISO 19819:2004
Metallic materials -- Tensile testing in liquid helium 90.92 TC 164/SC 1
ISO 20032:2007
Method for evaluation of tensile properties of metallic superplastic materials 60.60 TC 164/SC 2
ISO 20482:2003
Metallic materials -- Sheet and strip -- Erichsen cupping test 90.60 TC 164/SC 2
ISO/DIS 22394
Hardmetals -- Knoop hardness test 40.20 TC 119/SC 4
ISO 22889:2007
Metallic materials -- Method of test for the determination of resistance to stable crack extension using specimens of low constraint 60.60 TC 164/SC 4
ISO 23718:2007
Metallic materials -- Mechanical testing -- Vocabulary 60.60 TC 164
ISO/NP 23788
Metallic materials -- Axial alignment of fatigue testing machines 10.99 TC 164/SC 5
ISO 24213:2008
Metallic materials -- Sheet and strip -- Method for springback evaluation in stretch bending 60.60 TC 164/SC 2
ISO/TR 25679:2005
Mechanical testing of metals -- Symbols and definitions in published standards 60.60 TC 164
ISO/DIS 26203-1
Metallic materials -- Tensile testing method at high strain rates -- Part 1: Elastic bar type system 40.99 TC 164/SC 1
ISO/CD 26203-2
Metallic materials -- Tensile testing method at high strain rates -- Part 2: Servo-hydraulic and other test systems 30.99 TC 164/SC 1
ISO/FDIS 26843
Metallic materials -- Measurement of fracture toughness of steels at impact loading rates using precracked Charpy specimens 50.20 TC 164/SC 4
ISO 27306:2009
Metallic materials -- Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components 60.60 TC 164/SC 4
ISO 28079:2009
Hardmetals -- Palmqvist toughness test 60.60 TC 119/SC 4
ISO/CD 28080
Hardmetals -- Abrasion tests for hardmetals 30.92 TC 119/SC 4
ISO/TR 29381:2008
Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties 60.60 TC 164/SC 3

77.040.20 Non-destructive testing of metals
Non-destructive testing in general, see 19.100
Non-destructive testing of welded joints, see 25.160.40
Standard and/or project TC
ISO/DIS 4986
Steel and iron castings -- Magnetic particle inspection 40.99 TC 17/SC 11
ISO 4986:1992
Steel castings -- Magnetic particle inspection 90.92 TC 17/SC 11
ISO/DIS 4987
Steel and iron castings -- Liquid penetrant inspection 40.99 TC 17/SC 11
ISO 4987:1992
Steel castings -- Penetrant inspection 90.92 TC 17/SC 11
ISO 4992-1:2006
Steel castings -- Ultrasonic examination -- Part 1: Steel castings for general purposes 90.60 TC 17/SC 11
ISO 4992-2:2006
Steel castings -- Ultrasonic examination -- Part 2: Steel castings for highly stressed components 90.60 TC 17/SC 11
ISO 4993:2009
Steel and iron castings -- Radiographic inspection 60.60 TC 17/SC 11
ISO 5579:1998
Non-destructive testing -- Radiographic examination of metallic materials by X- and gamma rays -- Basic rules 90.60 TC 135/SC 5
ISO 5948:1994
Railway rolling stock material -- Ultrasonic acceptance testing 90.20 TC 17
ISO 6933:1986
Railway rolling stock material -- Magnetic particle acceptance testing 90.93 TC 17
ISO 9302:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness 90.92 TC 17/SC 19
ISO 9303:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9304:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Eddy current testing for the detection of imperfections 90.92 TC 17/SC 19
ISO 9305:1989
Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections 90.92 TC 17/SC 19
ISO 9402:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9598:1989
Seamless steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections 90.92 TC 17/SC 19
ISO 9915:1992
Aluminium alloy castings -- Radiography testing 90.93 TC 79/SC 7
ISO 9916:1991
Aluminium alloy and magnesium alloy castings -- Liquid penetrant inspection 90.93 TC 79/SC 7
ISO 10049:1992
Aluminium alloy castings -- Visual method for assessing the porosity 90.93 TC 79/SC 7
ISO 10124:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 10332:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the verification of hydraulic leak-tightness 90.92 TC 17/SC 19
ISO/DIS 10332
Non-destructive testing of steel tubes -- Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness as a substitution for the hydraulic test 40.20 TC 17/SC 19
ISO 10543:1993
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing 90.92 TC 17/SC 19
ISO/DIS 10893-1
Non-destructive testing of steel tubes -- Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak-tightness instead of the hydrostatic test 40.20 TC 17/SC 19
ISO/DIS 10893-2
Non-destructive testing of steel tubes -- Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-3
Non-destructive testing of steel tubes -- Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-4
Non-destructive testing of steel tubes -- Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-5
Non-destructive testing of steel tubes -- Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-7
Non-destructive testing of steel tubes -- Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-8
Non-destructive testing of steel tubes -- Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-9
Non-destructive testing of steel tubes -- Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes 40.20 TC 17/SC 19
ISO/DIS 10893-10
Non-destructive testing of steel tubes -- Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-12
Non-destructive testing of steel tubes -- Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 40.20 TC 17/SC 19
ISO 11484:2009
Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel 60.60 TC 17/SC 19
ISO 11496:1993
Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 11971:2008
Steel and iron castings -- Visual examination of surface quality 60.60 TC 17/SC 11
ISO 12094:1994
Welded steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes 90.92 TC 17/SC 19
ISO 12095:1994
Seamless and welded steel tubes for pressure purposes -- Liquid penetrant testing 90.92 TC 17/SC 19
ISO 13664:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube ends for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 13665:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube body for the detection of surface imperfections 90.92 TC 17/SC 19
ISO 17577:2006
Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm 90.20 TC 17/SC 7
ISO 25902-1:2009
Titanium pipes and tubes -- Non-destructive testing -- Part 1: Eddy-current examination 60.60 TC 79/SC 11
ISO/DIS 25902-2
Titanium pipes and tubes -- Non-destructive testing -- Part 2: Ultrasonic examination for the detection of longitudinal flaws 40.60 TC 79/SC 11

77.040.30 Chemical analysis of metals
Chemical analysis in general, see 71.040.40
Chemical analysis of ferroalloys, see 77.100
Chemical analysis of ferrous metals, see 77.080
Chemical analysis of non-ferrous metals, see 77.120
Chemical analysis of sintered metals and hard metals, see 77.160
77.040.99 Other methods of testing of metals
Standard and/or project TC
ISO 196:1978
Wrought copper and copper alloys -- Detection of residual stress -- Mercury(I) nitrate test 90.20 TC 26
ISO 642:1999
Steel -- Hardenability test by end quenching (Jominy test) 90.93 TC 17/SC 7
ISO 643:2003
Steels -- Micrographic determination of the apparent grain size 60.60 TC 17/SC 7
ISO 2624:1990
Copper and copper alloys -- Estimation of average grain size 90.20 TC 26
ISO 2626:1973
Copper -- Hydrogen embrittlement test 90.20 TC 26
ISO 2639:2002
Steels -- Determination and verification of the depth of carburized and hardened cases 60.60 TC 17/SC 7
ISO 3326:1975
Hardmetals -- Determination of (the magnetization) coercivity 90.93 TC 119/SC 4
ISO 3754:1976
Steel -- Determination of effective depth of hardening after flame or induction hardening 90.93 TC 17/SC 7
ISO 3763:1976
Wrought steels -- Macroscopic methods for assessing the content of non-metallic inclusions 90.93 TC 17/SC 7
ISO 3887:2003
Steels -- Determination of depth of decarburization 60.60 TC 17/SC 7
ISO 4499-1:2008
Hardmetals -- Metallographic determination of microstructure -- Part 1: Photomicrographs and description 60.60 TC 119/SC 4
ISO 4499-2:2008
Hardmetals -- Metallographic determination of microstructure -- Part 2: Measurement of WC grain size 60.60 TC 119/SC 4
ISO 4505:1978
Hardmetals -- Metallographic determination of porosity and uncombined carbon 90.93 TC 119/SC 4
ISO/TR 4745:1978
High conductivity copper -- Spiral elongation test 90.60 TC 26
ISO 4746:1977
Oxygen-free copper -- Scale adhesion test 90.20 TC 26
ISO 4967:1998
Steel -- Determination of content of nonmetallic inclusions -- Micrographic method using standard diagrams 90.60 TC 17/SC 7
ISO 4968:1979
Steel -- Macrographic examination by sulfur print (Baumann method) 90.93 TC 17/SC 7
ISO 4969:1980
Steel -- Macroscopic examination by etching with strong mineral acids 90.93 TC 17/SC 7
ISO 4970:1979
Steel -- Determination of total or effective thickness of thin surface-hardened layers 90.93 TC 17/SC 7
ISO 5949:1983
Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs 90.93 TC 17/SC 7
ISO 9042:1988
Steels -- Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid 90.20 TC 17/SC 7
ISO/TR 14321:1997
Sintered metal materials, excluding hardmetals -- Metallographic preparation and examination 60.60 TC 119/SC 3

77.060 Corrosion of metals
Surface treatment and coating, see 25.220
Standard and/or project TC
ISO 3651-1:1998
Determination of resistance to intergranular corrosion of stainless steels -- Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) 90.60 TC 17/SC 7
ISO 3651-2:1998
Determination of resistance to intergranular corrosion of stainless steels -- Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in media containing sulfuric acid 90.60 TC 17/SC 7
ISO 6509:1981
Corrosion of metals and alloys -- Determination of dezincification resistance of brass 90.60 TC 156
ISO 6957:1988
Copper alloys -- Ammonia test for stress corrosion resistance 90.20 TC 26
ISO 7384:1986
Corrosion tests in artificial atmosphere -- General requirements 90.60 TC 156
ISO 7441:1984
Corrosion of metals and alloys -- Determination of bimetallic corrosion in outdoor exposure corrosion tests 90.92 TC 156
ISO/NP 7441
Corrosion of metals and alloys -- Determination of bimetallic corrosion in outdoor exposure corrosion tests 10.99 TC 156
ISO 7539-1:1987
Corrosion of metals and alloys -- Stress corrosion testing -- Part 1: General guidance on testing procedures 90.92 TC 156
ISO 7539-2:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 2: Preparation and use of bent-beam specimens 90.20 TC 156
ISO 7539-3:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 3: Preparation and use of U-bend specimens 90.20 TC 156
ISO 7539-4:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 4: Preparation and use of uniaxially loaded tension specimens 90.20 TC 156
ISO 7539-5:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 5: Preparation and use of C-ring specimens 90.20 TC 156
ISO 7539-6:2003
Corrosion of metals and alloys -- Stress corrosion testing -- Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement 90.93 TC 156
ISO 7539-7:2005
Corrosion of metals and alloys -- Stress corrosion testing -- Part 7: Method for slow strain rate testing 90.93 TC 156
ISO 7539-8:2000
Corrosion of metals and alloys -- Stress corrosion testing -- Part 8: Preparation and use of specimens to evaluate weldments 90.60 TC 156
ISO 7539-9:2003
Corrosion of metals and alloys -- Stress corrosion testing -- Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement 90.93 TC 156
ISO 8044:1999
Corrosion of metals and alloys -- Basic terms and definitions 90.93 TC 156
ISO/PRF 8407
Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens 50.00 TC 156
ISO 8407:1991
Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens 90.92 TC 156
ISO/NP 8565
Metals and alloys -- Atmospheric corrosion testing -- General requirements for field tests 10.99 TC 156
ISO 8565:1992
Metals and alloys -- Atmospheric corrosion testing -- General requirements for field tests 90.92 TC 156
ISO 8993:1989
Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Chart method 90.92 TC 79/SC 2
ISO/DIS 8993
Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Chart method 40.00 TC 79/SC 2
ISO 8994:1989
Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method 90.92 TC 79/SC 2
ISO/DIS 8994
Aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method 40.20 TC 79/SC 2
ISO/NP 9223
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification, determination and estimation 10.99 TC 156
ISO 9223:1992
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification 90.92 TC 156
ISO 9224:1992
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories 90.92 TC 156
ISO/NP 9224
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories 10.99 TC 156
ISO 9225:1992
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of pollution 90.92 TC 156
ISO/NP 9225
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of environmental parameters affecting corrosivity of atmospheres 10.99 TC 156
ISO 9226:1992
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity 90.92 TC 156
ISO/NP 9226
Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity 10.99 TC 156
ISO 9227:2006
Corrosion tests in artificial atmospheres -- Salt spray tests 90.20 TC 156
ISO 9400:1990
Nickel-based alloys -- Determination of resistance to intergranular corrosion 90.60 TC 156
ISO 9591:2004
Corrosion of aluminium alloys -- Determination of resistance to stress corrosion cracking 90.93 TC 156
ISO 10062:2006
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) 90.60 TC 156
ISO 10270:1995
Corrosion of metals and alloys -- Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors 90.60 TC 156
ISO 10270:1995/Cor 1:1997
60.60 TC 156
ISO/DIS 11130
Corrosion of metals and alloys -- Alternate immersion test in salt solution 40.60 TC 156
ISO 11130:1999
Corrosion of metals and alloys -- Alternate immersion test in salt solution 90.92 TC 156
ISO 11303:2002
Corrosion of metals and alloys -- Guidelines for selection of protection methods against atmospheric corrosion 90.93 TC 156
ISO 11306:1998
Corrosion of metals and alloys -- Guidelines for exposing and evaluating metals and alloys in surface sea water 90.60 TC 156
ISO 11463:1995
Corrosion of metals and alloys -- Evaluation of pitting corrosion 90.60 TC 156
ISO 11474:1998
Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) 90.60 TC 156
ISO 11782-1:1998
Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 1: Cycles to failure testing 90.60 TC 156
ISO 11782-2:1998
Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens 90.60 TC 156
ISO 11844-1:2006
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 1: Determination and estimation of indoor corrosivity 90.60 TC 156
ISO 11844-2:2005
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 2: Determination of corrosion attack in indoor atmospheres 90.60 TC 156
ISO 11844-3:2006
Corrosion of metals and alloys -- Classification of low corrosivity of indoor atmospheres -- Part 3: Measurement of environmental parameters affecting indoor corrosivity 90.20 TC 156
ISO 11845:1995
Corrosion of metals and alloys -- General principles for corrosion testing 90.60 TC 156
ISO 11846:1995
Corrosion of metals and alloys -- Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys 90.92 TC 156
ISO/NP 11846
Corrosion of metals and alloys -- Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys 10.99 TC 156
ISO 11881:1999
Corrosion of metals and alloys -- Exfoliation corrosion testing of aluminium alloys 90.93 TC 156
ISO 11881:1999/Cor 1:1999
60.60 TC 156
ISO 12473:2006
General principles of cathodic protection in sea water 90.60 TC 156
ISO/NP 12495
Cathodic protection for fixed steel offshore structures 10.99 TC 156
ISO/NP 12696
Cathodic protection of steel in concrete 10.99 TC 156
ISO 12732:2006
Corrosion of metals and alloys -- Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) 90.20 TC 156
ISO/NP 13173
Cathodic protection for steel offshore floating structures 10.99 TC 156
ISO/NP 13174
Cathodic protection for harbour installations 10.99 TC 156
ISO 14993:2001
Corrosion of metals and alloys -- Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions 90.60 TC 156
ISO 15324:2000
Corrosion of metals and alloys -- Evaluation of stress corrosion cracking by the drop evaporation test 90.60 TC 156
ISO 15329:2006
Corrosion of metals and alloys -- Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys 90.20 TC 156
ISO 16151:2005
Corrosion of metals and alloys -- Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions 90.60 TC 156
ISO/NP 16701
Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution 10.99 TC 156
ISO 16701:2003
Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution 90.92 TC 156
ISO 16784-1:2006
Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems 90.60 TC 156
ISO 16784-2:2006
Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig 90.60 TC 156
ISO 17081:2004
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique 90.93 TC 156
ISO 17475:2005
Corrosion of metals and alloys -- Electrochemical test methods -- Guidelines for conducting potentiostatic and potentiodynamic polarization measurements 90.60 TC 156
ISO 17475:2005/Cor 1:2006
60.60 TC 156
ISO/CD 17752
Corrosion of metals and alloys -- Procedure to determine run off rates of metals from materials as a result of atmospheric corrosion 30.00 TC 156
ISO 17864:2005
Corrosion of metals and alloys -- Determination of the critical pitting temperature under potientiostatic control 90.93 TC 156
ISO 21207:2004
Corrosion tests in artificial atmospheres -- Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying 90.93 TC 156
ISO 21207:2004/Cor 1:2008
60.60 TC 156
ISO/DIS 21610
Corrosion of metals and alloys -- Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels 40.99 TC 156

77.080 Ferrous metals
Including classification, designation, sampling, chemical analysis, etc.
Dimensions and quality grades of iron and steel products, see 77.140
77.080.01 Ferrous metals in general
ISO 437:1982
Steel and cast iron -- Determination of total carbon content -- Combustion gravimetric method 90.93 TC 17/SC 1
ISO 437:1982/NP Amd 1
10.99 TC 17/SC 1
ISO 439:1994
Steel and iron -- Determination of total silicon content -- Gravimetric method 90.20 TC 17/SC 1
ISO 629:1982
Steel and cast iron -- Determination of manganese content -- Spectrophotometric method 90.93 TC 17/SC 1
ISO 671:1982
Steel and cast iron -- Determination of sulphur content -- Combustion titrimetric method 90.93 TC 17/SC 1
ISO 4829-1:1986
Steel and cast iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 1: Silicon contents between 0,05 and 1,0 % 90.93 TC 17/SC 1
ISO 4829-2:1988
Steel and iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 2: Silicon contents between 0,01 and 0,05 % 90.20 TC 17/SC 1
ISO 4934:2003
Steel and iron -- Determination of sulfur content -- Gravimetric method 90.93 TC 17/SC 1
ISO 4935:1989
Steel and iron -- Determination of sulfur content -- Infrared absorption method after combustion in an induction furnace 90.20 TC 17/SC 1
ISO 4937:1986
Steel and iron -- Determination of chromium content -- Potentiometric or visual titration method 90.93 TC 17/SC 1
ISO 4938:1988
Steel and iron -- Determination of nickel content -- Gravimetric or titrimetric method 90.20 TC 17/SC 1
ISO 4939:1984
Steel and cast iron -- Determination of nickel content -- Dimethylglyoxime spectrophotometric method 90.20 TC 17/SC 1
ISO 4940:1985
Steel and cast iron -- Determination of nickel content -- Flame atomic absorption spectrometric method 90.93 TC 17/SC 1
ISO 4941:1994
Steel and iron -- Determination of molybdenum content -- Thiocyanate spectrophotometric method 90.20 TC 17/SC 1
ISO 4942:1988
Steel and iron -- Determination of vanadium content -- N-BPHA spectrophotometric method 90.20 TC 17/SC 1
ISO 4943:1985
Steel and cast iron -- Determination of copper content -- Flame atomic absorption spectrometric method 90.93 TC 17/SC 1
ISO 4946:1984
Steel and cast iron -- Determination of copper content -- 2,2'-Diquinolyl spectrophotometric method 90.20 TC 17/SC 1
ISO 4947:1986
Steel and cast iron -- Determination of vanadium content -- Potentiometric titration method 90.93 TC 17/SC 1
ISO/TR 7003:1990
Unified format for the designation of metals 60.60 TMB
ISO 9556:1989
Steel and iron -- Determination of total carbon content -- Infrared absorption method after combustion in an induction furnace 90.20 TC 17/SC 1
ISO 9647:1989
Steel and iron -- Determination of vanadium content -- Flame atomic absorption spectrometric method 90.20 TC 17/SC 1
ISO/TR 9769:1991
Steel and iron -- Review of available methods of analysis 60.60 TC 17/SC 1
ISO 10138:1991
Steel and iron -- Determination of chromium content -- Flame atomic absorption spectrometric method 90.93 TC 17/SC 1
ISO 10280:1991
Steel and iron -- Determination of titanium content -- Diantipyrylmethane spectrometric method 90.93 TC 17/SC 1
ISO 10700:1994
Steel and iron -- Determination of manganese content -- Flame atomic absorption spectrometric method 90.20 TC 17/SC 1
ISO 10701:1994
Steel and iron -- Determination of sulfur content -- Methylene blue spectrophotometric method 90.20 TC 17/SC 1
ISO 10702:1993
Steel and iron -- Determination of nitrogen content -- Titrimetric method after distillation 90.93 TC 17/SC 1
ISO 10714:1992
Steel and iron -- Determination of phosphorus content -- Phosphovanadomolybdate spectrophotometric method 90.93 TC 17/SC 1
ISO/TR 10719:1994
Steel and iron -- Determination of non-combined carbon content -- Infrared absorption method after combustion in an induction furnace 90.93 TC 17/SC 1
ISO 10720:1997
Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas 90.93 TC 17/SC 1
ISO 11652:1997
Steel and iron -- Determination of cobalt content -- Flame atomic absorption spectrometric method 90.93 TC 17/SC 1
ISO 13898-1:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: General requirements and sample dissolution 90.93 TC 17/SC 1
ISO 13898-2:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of nickel content 90.93 TC 17/SC 1
ISO 13898-3:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of copper content 90.93 TC 17/SC 1
ISO 13898-4:1997
Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 4: Determination of cobalt content 90.93 TC 17/SC 1
ISO 13902:1997
Steel and iron -- Determination of high sulfur content -- Infrared absorption method after combustion in an induction furnace 90.93 TC 17/SC 1
ISO 14284:1996
Steel and iron -- Sampling and preparation of samples for the determination of chemical composition 90.93 TC 17/SC 1
ISO 15350:2000
Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) 90.93 TC 17/SC 1
ISO 15351:1999
Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) 90.20 TC 17/SC 1
ISO 15353:2001
Steel and iron -- Determination of tin content -- Flame atomic absorption spectrometric method (extraction as Sn-SCN) 90.93 TC 17/SC 1
ISO 15355:1999
Steel and iron -- Determination of chromium content -- Indirect titration method 90.20 TC 17/SC 1
ISO 16918-1:2009
Steel and iron -- Determination of nine elements by the inductively coupled plasma mass spectrometric method -- Part 1: Determination of tin, antimony, cerium, lead and bismuth 60.60 TC 17/SC 1
ISO 17053:2005
Steel and iron -- Determination of oxygen -- Infrared method after fusion under inert gas 90.93 TC 17/SC 1
ISO 17058:2004
Steel and iron -- Determination of arsenic content -- Spectrophotometric method 90.93 TC 17/SC 1

77.080.10 Irons
Standard and/or project TC
ISO 185:2005
Grey cast irons -- Classification 90.60 TC 25
ISO 945-1:2008
Microstructure of cast irons -- Part 1: Graphite classification by visual analysis 60.60 TC 25
ISO 1083:2004
Spheroidal graphite cast irons - Classification 90.93 TC 25
ISO 2892:2007
Austenitic cast irons -- Classification 60.60 TC 25
ISO 2892:2007/Cor 1:2009
60.60 TC 25
ISO 5922:2005
Malleable cast iron 90.93 TC 25
ISO 9147:1987
Pig-irons -- Definition and classification 90.93 TC 25
ISO/PRF TR 10809-1
Cast Irons -- Part 1: Materials and properties for design 50.00 TC 25
ISO/CD TR 10809-2
Cast Irons -- Part 2: Welding 30.20 TC 25
ISO/TR 15931:2004
Designation system for cast irons and pig irons 60.60 TC 25
ISO 16112:2006
Compacted (vermicular) graphite cast irons -- Classification 90.20 TC 25
ISO 17804:2005
Founding -- Ausferritic spheroidal graphite cast irons -- Classification 90.60 TC 25
ISO 21988:2006
Abrasion-resistant cast irons -- Classification 90.20 TC 25

77.080.20 Steels
Standard and/or project TC
ISO 404:1992
Steel and steel products -- General technical delivery requirements 90.60 TC 17/SC 20
ISO/TR 4830-4:1978
Steel -- Determination of low carbon contents -- Part 4: Coulometric method after combustion 90.93 TC 17/SC 1
ISO 4945:1977
Steel -- Determination of nitrogen content -- Spectrophotometric method 90.93 TC 17/SC 1
ISO 4948-1:1982
Steels -- Classification -- Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition 90.93 TC 17
ISO 4948-2:1981
Steels -- Classification -- Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics 90.93 TC 17
ISO/TS 4949:2003
Steel names based on letter symbols 90.93 TC 17
ISO/TR 6306:1989
Chemical analysis of steel -- Order of listing elements 60.60 TC 17/SC 20
ISO/TR 7705:1991
Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications 90.93 TC 17
ISO 9441:1988
Steel -- Determination of niobium content -- PAR spectrophotometric method 90.20 TC 17/SC 1
ISO 9658:1990
Steel -- Determination of aluminium content -- Flame atomic absorption spectrometric method 90.93 TC 17/SC 1
ISO 10153:1997
Steel -- Determination of boron content -- Curcumin spectrophotometric method 90.93 TC 17/SC 1
ISO 10278:1995
Steel -- Determination of manganese content -- Inductively coupled plasma atomic emission spectrometric method 90.93 TC 17/SC 1
ISO 10697-1:1992
Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 1: Determination of acid-soluble calcium content 90.93 TC 17/SC 1
ISO 10697-2:1994
Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 2: Determination of total calcium content 90.20 TC 17/SC 1
ISO 10698:1994
Steel -- Determination of antimony content -- Electrothermal atomic absorption spectrometric method 90.20 TC 17/SC 1
ISO 11653:1997
Steel -- Determination of high cobalt content -- Potentiometric titration method after separation by ion exchange 90.93 TC 17/SC 1
ISO/TS 13899-1:2004
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: Determination of Mo content 90.93 TC 17/SC 1
ISO 13899-2:2005
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of Nb content 90.93 TC 17/SC 1
ISO/TS 13899-3:2005
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of W content 90.93 TC 17/SC 1
ISO 13900:1997
Steel -- Determination of boron content -- Curcumin spectrophotometric method after distillation 90.93 TC 17/SC 1
ISO 14250:2000
Steel -- Metallographic characterization of duplex grain size and distributions 90.93 TC 17/SC 7
ISO/TR 15349-1:1998
Unalloyed steel -- Determination of low carbon content -- Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) 90.93 TC 17/SC 1
ISO 15349-2:1999
Unalloyed steel -- Determination of low carbon content -- Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) 90.20 TC 17/SC 1
ISO/TR 15349-3:1998
Unalloyed steel -- Determination of low carbon content -- Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) 90.93 TC 17/SC 1
ISO/DIS 17054
Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique 40.60 TC 17/SC 1
ISO/TR 17055:2002
Steel -- Determination of silicon content -- Inductively coupled plasma atomic emission spectrometric method 60.60 TC 17/SC 1
ISO 17925:2004
Zinc and/or aluminium based coatings on steel -- Determination of coating mass per unit area and chemical composition -- Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry 90.93 TC 17/SC 1
ISO/WD 24897
Steel -- Determination of trace amount of oxigen -- Infrared method with oxide layer subtraction technique 20.20 TC 17/SC 1

77.100 Ferroalloys
Including classification, designation, sampling, chemical analysis, etc.
Standard and/or project TC
ISO 3713:1987
Ferroalloys -- Sampling and preparation of samples -- General rules 90.93 TC 132
ISO 4139:1979
Ferrosilicon -- Determination of aluminium content -- Flame atomic absorption spectrometric method 90.20 TC 132
ISO 4140:1979
Ferrochromium and ferrosilicochromium -- Determination of chromium content -- Potentiometric method 90.20 TC 132
ISO 4158:1978
Ferrosilicon, ferrosilicomanganese and ferrosilicochromium -- Determination of silicon content -- Gravimetric method 90.93 TC 132
ISO 4159:1978
Ferromanganese and ferrosilicomanganese -- Determination of manganese content -- Potentiometric method 90.93 TC 132
ISO 4173:1980
Ferromolybdenum -- Determination of molybdenum content -- Gravimetric method 90.93 TC 132
ISO 4346:1977
Steel wire ropes for general purposes -- Lubricants -- Basic requirements 90.93 TC 105
ISO 4551:1987
Ferroalloys -- Sampling and sieve analysis 90.93 TC 132
ISO 4552-1:1987
Ferroalloys -- Sampling and sample preparation for chemical analysis -- Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese 90.93 TC 132
ISO 4552-2:1987
Ferroalloys -- Sampling and sample preparation for chemical analysis -- Part 2: Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium 90.93 TC 132
ISO 5445:1980
Ferrosilicon -- Specification and conditions of delivery 90.93 TC 132
ISO 5446:1980
Ferromanganese -- Specification and conditions of delivery 90.93 TC 132
ISO 5447:1980
Ferrosilicomanganese -- Specification and conditions of delivery 90.93 TC 132
ISO 5448:1981
Ferrochromium -- Specification and conditions of delivery 90.93 TC 132
ISO 5449:1980
Ferrosilicochromium -- Specification and conditions of delivery 90.93 TC 132
ISO 5450:1980
Ferrotungsten -- Specification and conditions of delivery 90.93 TC 132
ISO 5451:1980
Ferrovanadium -- Specification and conditions of delivery 90.93 TC 132
ISO 5452:1980
Ferromolybdenum -- Specification and conditions of delivery 90.93 TC 132
ISO 5453:1980
Ferroniobium -- Specification and conditions of delivery 90.93 TC 132
ISO 5454:1980
Ferrotitanium -- Specification and conditions of delivery 90.93 TC 132
ISO 6352:1985
Ferronickel -- Determination of nickel content -- Dimethylglyoxime gravimetric method 90.93 TC 155/SC 3
ISO 6467:1980
Ferrovanadium -- Determination of vanadium content -- Potentiometric method 90.93 TC 132
ISO 6501:1988
Ferronickel -- Specification and delivery requirements 90.20 TC 155/SC 5
ISO 7087:1984
Ferroalloys -- Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling 90.20 TC 132
ISO 7347:1987
Ferroalloys -- Experimental methods for checking the bias of sampling and sample preparation 90.93 TC 132
ISO 7373:1987
Ferroalloys -- Experimental methods for checking the precision of sample division 90.93 TC 132
ISO 7520:1985
Ferronickel -- Determination of cobalt content -- Flame atomic absorption spectrometric method 90.93 TC 155/SC 3
ISO 7524:1985
Nickel, ferronickel and nickel alloys -- Determination of carbon content -- Infra-red absorption method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7526:1985
Nickel, ferronickel and nickel alloys -- Determination of sulfur content -- Infra-red absorption method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7527:1985
Nickel, ferronickel and nickel alloys -- Determination of sulfur content -- Iodimetric titration method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7692:1983
Ferrotitanium -- Determination of titanium content -- Titrimetric method 90.20 TC 132
ISO 7693:1984
Ferrotungsten -- Determination of tungsten content -- Cinchonine gravimetric method 90.20 TC 132
ISO/TR 7955:1982
Ferroniobium -- Determination of niobium content -- Gravimetric method 60.60 TC 132
ISO 8049:1988
Ferronickel shot -- Sampling for analysis 90.20 TC 155/SC 5
ISO 8050:1988
Ferronickel ingots or pieces -- Sampling for analysis 90.20 TC 155/SC 5
ISO 8343:1985
Ferronickel -- Determination of silicon content -- Gravimetric method 90.93 TC 155/SC 3
ISO 8954-1:1990
Ferroalloys -- Vocabulary -- Part 1: Materials 90.92 TC 132
ISO 8954-2:1990
Ferroalloys -- Vocabulary -- Part 2: Sampling and sample preparation 90.93 TC 132
ISO 8954-3:1990
Ferroalloys -- Vocabulary -- Part 3: Sieve analysis 90.93 TC 132
ISO 10386:1994
Ferroboron -- Specification and conditions of delivery 90.20 TC 132
ISO 10387:1994
Metal chrome -- Specification and conditions of delivery 90.20 TC 132
ISO 11400:1992
Nickel, ferronickel and nickel alloys -- Determination of phosphorus content -- Phosphovanadomolybdate molecular absorption spectrometric method 90.60 TC 155/SC 3
ISO 11438-1:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 1: General requirements and sample dissolution 90.60 TC 155/SC 3
ISO 11438-2:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 2: Determination of lead content 90.60 TC 155/SC 3
ISO 11438-3:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 3: Determination of antimony content 90.60 TC 155/SC 3
ISO 11438-4:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 4: Determination of tin content 90.60 TC 155/SC 3
ISO 11438-5:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 5: Determination of tellurium content 90.60 TC 155/SC 3
ISO 11438-6:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 6: Determination of thallium content 90.60 TC 155/SC 3
ISO 11438-7:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 7: Determination of silver content 90.60 TC 155/SC 3
ISO 11438-8:1993
Ferronickel -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 8: Determination of indium content 90.60 TC 155/SC 3

77.120 Non-ferrous metals
Including classification, designation, sampling, chemical analysis, etc.
Dimensions and quality grades of non-ferrous metal products, see 77.150
Precious metals for dentistry, see 11.060.10
Precious metals for jewellery, see 39.060
77.120.01 Non-ferrous metals in general
Standard and/or project TC
ISO/AWI 3134
Aluminium and aluminium alloys -- Terms and definition -- General terms 20.00 TC 79
ISO 3134-1:1985
Light metals and their alloys -- Terms and definitions -- Part 1: Materials 90.92 TC 79
ISO/TR 7003:1990
Unified format for the designation of metals 60.60 TMB
ISO/TR 7242:1981
Chemical analysis of light metals and their alloys -- Statistical interpretation of inter-laboratory trials 90.93 TC 79

77.120.10 Aluminium and aluminium alloys
Standard and/or project TC
ISO 115:2003
Unalloyed aluminium ingots for remelting -- Classification and composition 90.60 TC 79/SC 4
ISO 793:1973
Aluminium and aluminium alloys -- Determination of iron -- Orthophenanthroline photometric method 90.93 TC 79
ISO 795:1976
Aluminium and aluminium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method 90.93 TC 79
ISO 796:1973
Aluminium alloys -- Determination of copper -- Electrolytic method 90.93 TC 79
ISO 797:1973
Aluminium and aluminium alloys -- Determination of silicon -- Gravimetric method 90.93 TC 79
ISO 808:1973
Aluminium and aluminium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex 90.93 TC 79
ISO 886:1973
Aluminium and aluminium alloys -- Determination of manganese -- Photometric method (Manganese content between 0,005 and 1,5 %) 90.93 TC 79
ISO 1118:1978
Aluminium and aluminium alloys -- Determination of titanium -- Spectrophotometric chromotropic acid method 90.93 TC 79
ISO 1784:1976
Aluminium alloys -- Determination of zinc -- EDTA titrimetric method 90.93 TC 79
ISO 2107:2007
Aluminium and aluminium alloys -- Wrought products --Temper designations 60.60 TC 79/SC 9
ISO 2297:1973
Chemical analysis of aluminium and its alloys -- Complexometric determination of magnesium 90.93 TC 79
ISO 3256:1977
Aluminium and aluminium alloys -- Determination of magnesium -- Atomic absorption spectrophotometric method 90.93 TC 79
ISO 3978:1976
Aluminium and aluminium alloys -- Determination of chromium -- Spectrophotometric method using diphenylcarbazide, after extraction 90.93 TC 79
ISO 3979:1977
Aluminium and aluminium alloys -- Determination of nickel -- Spectrophotometric method using dimethylglyoxime 90.93 TC 79
ISO 3980:1977
Aluminium and aluminium alloys -- Determination of copper -- Atomic absorption spectrophotometric method 90.93 TC 79
ISO 3981:1977
Aluminium and aluminium alloys -- Determination of nickel -- Atomic absorption spectrophotometric method 90.93 TC 79
ISO 4192:1981
Aluminium and aluminium alloys -- Determination of lead content -- Flame atomic absorption spectrometric method 90.93 TC 79
ISO 4193:1981
Aluminium and aluminium alloys -- Determination of chromium content -- Flame atomic absorption spectrometric method 90.93 TC 79
ISO 5194:1981
Aluminium and aluminium alloys -- Determination of zinc content -- Flame atomic absorption spectrometric method 90.93 TC 79
ISO 6827:1981
Aluminium and aluminium alloys -- Determination of titanium content -- Diantipyrylmethane photometric method 90.93 TC 79
ISO 17615:2007
Aluminium and aluminium alloys -- Alloyed ingots for remelting -- Specifications 60.60 TC 79/SC 7
ISO 17615:2007/Cor 1:2008
60.60 TC 79/SC 7
ISO 20203:2005
Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of crystallite size of calcined petroleum coke by X-ray diffraction 90.93 TC 226

77.120.20 Magnesium and magnesium alloys
Standard and/or project TC
ISO 791:1973
Magnesium alloys -- Determination of aluminium -- 8-hydroxyquinoline gravimetric method 90.93 TC 79
ISO 792:1973
Magnesium and magnesium alloys -- Determination of iron -- Orthophenanthroline photometric method 90.93 TC 79
ISO 794:1976
Magnesium and magnesium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method 90.93 TC 79
ISO 809:1973
Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content between 0,01 and 0,8 %) 90.93 TC 79
ISO 810:1973
Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content less than 0,01 %) 90.93 TC 79
ISO 1178:1976
Magnesium alloys -- Determination of soluble zirconium -- Alizarin sulphonate photometric method 90.93 TC 79
ISO 1783:1973
Magnesium alloys -- Determination of zinc -- Volumetric method 90.93 TC 79
ISO 1975:1973
Magnesium and magnesium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex 90.93 TC 79
ISO 2353:1972
Magnesium and its alloys -- Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver -- Periodate photometric method 90.93 TC 79
ISO 2354:1976
Magnesium alloys -- Determination of insoluble zirconium -- Alizarin sulphonate photometric method 90.93 TC 79
ISO 2355:1972
Chemical analysis of magnesium and its alloys -- Determination of rare earths -- Gravimetric method 90.93 TC 79
ISO 3116:2007
Magnesium and magnesium alloys -- Wrought magnesium alloys 60.60 TC 79/SC 5
ISO 3255:1974
Magnesium and magnesium alloys -- Determination of aluminium -- Chromazurol S photometric method 90.93 TC 79
ISO 4058:1977
Magnesium and its alloys -- Determination of nickel -- Photometric method using dimethylglyoxime 90.93 TC 79
ISO 4194:1981
Magnesium alloys -- Determination of zinc content -- Flame atomic absorption spectrometric method 90.93 TC 79
ISO 5196-1:1980
Magnesium alloys -- Determination of thorium -- Part 1: Gravimetric method 90.93 TC 79
ISO 5196-2:1980
Magnesium alloys -- Determination of thorium -- Part 2: Titrimetric method 90.93 TC 79
ISO 8287:2000
Magnesium and magnesium alloys -- Unalloyed magnesium -- Chemical composition 90.60 TC 79/SC 5
ISO/WD 11707
Magnesium and magnesium alloys -- Determination of lead and cadmium 20.20 TC 79/SC 5
ISO 23079:2005
Magnesium and magnesium alloys -- Returns -- Requirements, classification and acceptance 90.60 TC 79/SC 5
ISO 26202:2007
Magnesium and magnesium alloys -- Magnesium alloys for cast anodes 60.60 TC 79/SC 5

77.120.30 Copper and copper alloys
Standard and/or project TC
ISO 197-1:1983
Copper and copper alloys -- Terms and definitions -- Part 1: Materials 90.20 TC 26
ISO 197-5:1980
Copper and copper alloys -- Terms and definitions -- Part 5: Methods of processing and treatment 90.20 TC 26
ISO 1190-1:1982
Copper and copper alloys -- Code of designation -- Part 1: Designation of materials 90.20 TC 26
ISO 1553:1976
Unalloyed copper containing not less than 99,90 % of copper -- Determination of copper content -- Electrolytic method 90.60 TC 26
ISO 1554:1976
Wrought and cast copper alloys -- Determination of copper content -- Electrolytic method 90.60 TC 26
ISO 1810:1976
Copper alloys -- Determination of nickel (low contents) -- Dimethylglyoxime spectrophotometric method 90.60 TC 26
ISO 1811-1:1988
Copper and copper alloys -- Selection and preparation of samples for chemical analysis -- Part 1: Sampling of cast unwrought products 90.20 TC 26
ISO 1811-2:1988
Copper and copper alloys -- Selection and preparation of samples for chemical analysis -- Part 2: Sampling of wrought products and castings 90.20 TC 26




http://www.int-bizdirectory.com/standards.htm