http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.
ISO 494:2009
Cylindrical shank twist drills -- Long series 60.60 TC 29/SC 2
ISO 521:1975
Machine chucking reamers with parallel shanks or Morse taper shanks 90.92 TC 29/SC 2
ISO/DIS 521
Machine chucking reamers with parallel shanks or Morse taper shanks 40.99 TC 29/SC 2
ISO 522:1975
Special tolerances for reamers 90.93 TC 29/SC 2
ISO 866:1975
Centre drills for centre holes without protecting chamfers -- Type A 90.93 TC 29/SC 2
ISO/DIS 2238
Machine bridge reamers 40.99 TC 29/SC 2
ISO 2238:1972
Machine bridge reamers 90.92 TC 29/SC 2
ISO 2250:2009
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
60.60 TC 29/SC 2
ISO 2306:1972
Drills for use prior to tapping screw threads 90.92 TC 29/SC 2
ISO/DIS 2306
Drills for use prior to tapping screw threads 40.99 TC 29/SC 2
ISO/DIS 2402
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for
shell reamers 40.99 TC 29/SC 2
ISO 2402:1972
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for
shell reamers 90.92 TC 29/SC 2
ISO 2540:1973
Centre drills for centre holes with protecting chamfer -- Type B 90.93 TC 29/SC 2
ISO 2541:1972
Centre drills for centre holes with radius form -- Type R 90.93 TC 29/SC 2
ISO 3291:1995
Extra-long Morse taper shank twist drills 90.93 TC 29/SC 2
ISO 3292:1995
Extra-long parallel shank twist drills 90.93 TC 29/SC 2
ISO 3293:1975
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
90.93 TC 29/SC 2
ISO 3294:1975
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive 90.93 TC 29/SC 2
ISO 3314:1975
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive 90.92 TC 29/SC 2
ISO/DIS 3314
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive 40.99 TC 29/SC 2
ISO 3438:2003
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads 90.60 TC
29/SC 2
ISO 3439:2003
Subland twist drills with cylindrical shanks for holes prior to tapping screw threads 90.60 TC
29/SC 2
ISO/DIS 3465
Hand taper pin reamers 40.99 TC 29/SC 2
ISO 3465:1975
Hand taper pin reamers 90.92 TC 29/SC 2
ISO 3466:1975
Machine taper pin reamers with parallel shanks 90.92 TC 29/SC 2
ISO/DIS 3466
Machine taper pin reamers with parallel shanks 40.99 TC 29/SC 2
ISO/DIS 3467
Machine taper pin reamers with Morse taper shanks 40.99 TC 29/SC 2
ISO 3467:1975
Machine taper pin reamers with Morse taper shanks 90.92 TC 29/SC 2
ISO 4204:1977
Countersinks, 90 degrees, with Morse taper shanks and detachable pilots 90.93 TC 29/SC 2
ISO 4205:1991
Countersinks, 90 degrees, with parallel shanks and solid pilots 90.93 TC 29/SC 2
ISO 4206:1991
Counterbores with parallel shanks and solid pilots 90.93 TC 29/SC 2
ISO 4208:1977
Detachable pilots for use with counterbores and 90 degrees countersinks -- Dimensions 90.93 TC
29/SC 2
ISO 5419:1982
Twist drills -- Terms, definitions and types 90.93 TC 29/SC 2
ISO 5419:1982/Cor 1:1996
60.60 TC 29/SC 2
ISO 5420:1983
Reamers -- Terms, definitions and types 90.93 TC 29/SC 2
ISO 5468:2006
Rotary and rotary impact masonry drill bits with hardmetal tips -- Dimensions 90.20 TC 29/SC 2
ISO 7079:1981
Core drills with parallel shanks and with Morse taper shanks 90.93 TC 29/SC 2
ISO 9766:1990
Drills with indexable inserts -- Cylindrical shanks with a parallel flat 90.93 TC 29/SC 9
ISO 10887:1999
Key type three-jaw drill chucks -- Specification 90.93 TC 29
ISO 10888:1999
Keyless type three-jaw drill chucks -- Specification 90.93 TC 29
ISO 10898:1992
Spot drills 90.93 TC 29/SC 2
ISO 10899:1996
High-speed steel two-flute twist drills -- Technical specifications 90.93 TC 29/SC 2
25.100.40 Saws
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 2296:1972
Metal slitting saws with fine and coarse teeth -- Metric series 90.92 TC 29/SC 2
ISO/DIS 2296
Metal slitting saws with fine and coarse teeth -- Metric series 40.99 TC 29/SC 2
ISO 2336-1:1996
Hacksaw blades -- Part 1: Dimensions for hand blades 90.93 TC 29
ISO 2336-2:2006
Hacksaw blades -- Part 2: Dimensions for machine blades 60.60 TC 29
ISO 2924:1973
Solid and segmental circular saws for cold cutting of metals -- Interchangeability dimensions
of the drive -- Saw diameter range 224 to 2 240 mm 90.93 TC 29
ISO 4875-1:2006
Metal-cutting band saw blades -- Part 1: Vocabulary 60.60 TC 29
ISO 4875-2:2006
Metal-cutting band saw blades -- Part 2: Characteristics and dimensions 60.60 TC 29
25.100.50 Taps and threading dies
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 529:1993
Short machine taps and hand taps 90.20 TC 29/SC 2
ISO 2283:2000
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in -- Reduced shank taps
90.93 TC 29/SC 2
ISO 2284:1987
Hand taps for parallel and taper pipe threads -- General dimensions and marking 90.20 TC 29/SC
2
ISO 2568:1988
Hand- and machine-operated circular screwing dies and hand-operated die stocks 90.93 TC 29/SC 2
ISO 2857:1973
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine
pitches -- Manufacturing tolerances on the threaded portion 90.93 TC 29/SC 2
ISO 2857:1973/Amd 1:1984
60.60 TC 29/SC 2
ISO 2857:1973/Cor 1:1990
60.60 TC 29/SC 2
ISO 2857:1973/Amd 2:1986
60.60 TC 29/SC 2
ISO 4230:1987
Hand- and machine-operated circular screwing dies for taper pipe threads -- R series 90.20 TC
29/SC 2
ISO 4231:1987
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series 90.20 TC
29/SC 2
ISO 5396:1977
Hardmetal heading dies -- Terminology 90.93 TC 29
ISO 5407:1981
As-sintered hardmetal pellets used in heading dies -- Dimensions and tolerances 90.93 TC 29
ISO 5967:1981
Taps and thread cutting -- Nomenclature of the main types and terminology 90.20 TC 29/SC 2
ISO 5968:1981
Circular screwing dies -- Terminology 90.93 TC 29/SC 2
ISO 5969:1979
Ground thread taps for pipe threads G series and Rp series -- Tolerances on the threaded
portion 90.93 TC 29/SC 2
ISO 5969:1979/Cor 1:1991
60.60 TC 29/SC 2
ISO 7226:1988
Hexagonal dienuts 90.93 TC 29/SC 2
ISO 8051:1999
Long shank taps with nominal diameters from M3 to M10 -- Full-diameter shank taps with recess
90.93 TC 29/SC 2
ISO 8830:1991
High-speed steel machine taps with ground threads -- Technical specifications 90.93 TC 29/SC 2
25.100.60 Files
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 234-1:1983
Files and rasps -- Part 1: Dimensions 90.93 TC 29
ISO 234-2:1982
Files and rasps -- Part 2: Characteristics of cut 90.93 TC 29
25.100.70 Abrasives
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 525:1999
Bonded abrasive products -- General requirements 90.20 TC 29/SC 5
ISO/NP 525
Bonded abrasive products -- General requirements 10.99 TC 29/SC 5
ISO 603-1:1999
Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for external cylindrical
grinding between centres 90.20 TC 29/SC 5
ISO 603-1:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-2:1999
Bonded abrasive products -- Dimensions -- Part 2: Grinding wheels for centreless external
cylindrical grinding 90.20 TC 29/SC 5
ISO 603-2:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-3:1999
Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for internal cylindrical
grinding 90.20 TC 29/SC 5
ISO 603-3:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-4:1999
Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for surface
grinding/peripheral grinding 90.20 TC 29/SC 5
ISO 603-4:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-5:1999
Bonded abrasive products -- Dimensions -- Part 5: Grinding wheels for surface grinding/face
grinding 90.20 TC 29/SC 5
ISO 603-5:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-6:1999
Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room
grinding 90.20 TC 29/SC 5
ISO 603-6:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-7:1999
Bonded abrasive products -- Dimensions -- Part 7: Grinding wheels for manually guided grinding
90.20 TC 29/SC 5
ISO 603-7:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-8:1999
Bonded abrasive products -- Dimensions -- Part 8: Grinding wheels for deburring and
fettling/snagging 90.20 TC 29/SC 5
ISO 603-8:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-9:1999
Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for high-pressure grinding
90.20 TC 29/SC 5
ISO 603-9:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-10:1999
Bonded abrasive products -- Dimensions -- Part 10: Stones for honing and superfinishings 90.20
TC 29/SC 5
ISO 603-10:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-11:1999
Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks 90.20 TC 29/SC 5
ISO 603-11:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-12:1999
Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling
on a straight grinder 90.20 TC 29/SC 5
ISO 603-12:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-13:1999
Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling
on a vertical grinder 90.20 TC 29/SC 5
ISO 603-13:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-14:1999
Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for deburring and
fettling/snagging on an angle grinder 90.20 TC 29/SC 5
ISO 603-14:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-15:1999
Bonded abrasive products -- Dimensions -- Part 15: Grinding wheels for cutting-off on
stationary or mobile cutting-off machines 90.20 TC 29/SC 5
ISO 603-15:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO 603-16:1999
Bonded abrasive produtcs -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held
power tools 90.20 TC 29/SC 5
ISO 603-16:1999/Cor 1:1999
60.60 TC 29/SC 5
ISO/NP 603-17
Bonded abrasive products -- Dimensions -- Part 17: Mounted wheels 10.99 TC 29/SC 5
ISO 666:2006
Machine tools -- Mounting of grinding wheels by means of hub flanges 90.20 TC 29/SC 5
ISO 2421:2003
Coated abrasives -- Cylindrical sleeves 90.93 TC 29/SC 5
ISO 2976:2005
Coated abrasives -- Abrasive belts -- Selection of width/length combinations 90.93 TC 29/SC 5
ISO 3366:1999
Coated abrasives -- Abrasive rolls 90.20 TC 29/SC 5
ISO 3919:2005
Coated abrasives -- Flap wheels with shaft 90.60 TC 29/SC 5
ISO 5429:2005
Coated abrasives -- Flap wheels with incorporated flanges or separate flanges 90.60 TC 29/SC 5
ISO 6103:2005
Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Static
testing 90.60 TC 29/SC 5
ISO 6104:2005
Superabrasive products -- Rotating grinding tools with diamond or cubic boron nitride --
General survey, designation and multilingual nomenclature 90.93 TC 29/SC 5
ISO 6106:2005
Abrasive products -- Checking the grit size of superabrasives 90.60 TC 29/SC 5
ISO 6344-1:1998
Coated abrasives -- Grain size analysis -- Part 1: Grain size distribution test 90.93 TC 29/SC
5
ISO 6344-2:1998
Coated abrasives -- Grain size analysis -- Part 2: Determination of grain size distribution of
macrogrits P12 to P220 90.93 TC 29/SC 5
ISO 6344-3:1998
Coated abrasives -- Grain size analysis -- Part 3: Determination of grain size distribution of
microgrits P240 to P2500 90.92 TC 29/SC 5
ISO 6344-3:1998/Cor 1:1999
90.92 TC 29/SC 5
ISO 8486-1:1996
Bonded abrasives -- Determination and designation of grain size distribution -- Part 1:
Macrogrits F4 to F220 90.93 TC 29/SC 5
ISO 8486-2:2007
Bonded abrasives -- Determination and designation of grain size distribution -- Part 2:
Microgrits F230 to F2000 60.60 TC 29/SC 5
ISO 9136-1:2004
Abrasive grains -- Determination of bulk density -- Part 1: Macrogrits 90.93 TC 29/SC 5
ISO 9136-2:1999
Abrasive grains -- Determination of bulk density -- Part 2: Microgrits 90.20 TC 29/SC 5
ISO 9138:1993
Abrasive grains -- Sampling and splitting 90.93 TC 29/SC 5
ISO 9284:1992
Abrasive grains -- Test-sieving machines 90.93 TC 29/SC 5
ISO 9285:1997
Abrasive grains and crude -- Chemical analysis of fused aluminium oxide 90.93 TC 29/SC 5
ISO 9286:1997
Abrasive grains and crude -- Chemical analysis of silicon carbide 90.93 TC 29/SC 5
ISO 13942:2000
Bonded abrasive products -- Limit deviations and run-out tolerances 90.93 TC 29/SC 5
ISO 15635:2001
Coated abrasives -- Flap discs 90.93 TC 29/SC 5
ISO 15636:2003
Back-up pads for vulcanized fibre discs 90.93 TC 29/SC 5
ISO 15637-1:2002
Holding fixtures of cylindrical abrasive sleeves -- Part 1: Holding fixtures with shank for
hand-held grinding machines 90.93 TC 29/SC 5
ISO 15637-2:2002
Holding fixtures of cylindrical abrasive sleeves -- Part 2: Holding fixtures for stationary
machines 90.93 TC 29/SC 5
ISO 16057:2002
Coated abrasives -- Vulcanized fibre discs 60.60 TC 29/SC 5
ISO 21537-1:2004
Clamping flanges for superabrasive cutting-off wheels -- Part 1: Natural stone 90.93 TC 29/SC 5
ISO 21537-2:2004
Clamping flanges for superabrasive cutting-off wheels -- Part 2: Building and construction
90.93 TC 29/SC 5
ISO 21538:2004
Blanks for superabrasive cutting-off wheels -- Mounting and fixing bores -- Building
construction and civil engineering 90.93 TC 29/SC 5
ISO 21948:2001
Coated abrasives -- Plain sheets 90.93 TC 29/SC 5
ISO 21949:2001
Coated abrasives -- Plain sheets with holes for dust extraction 90.93 TC 29/SC 5
ISO 21950:2001
Coated abrasives -- Plain discs 90.93 TC 29/SC 5
ISO 21951:2001
Coated abrasives -- Plain discs with holes for dust extraction 90.93 TC 29/SC 5
ISO 22917:2004
Superabrasives -- Limit deviations and run-out tolerances for grinding wheels with diamond or
cubic boron nitride 90.93 TC 29/SC 5
ISO/TR 24857:2006
Synthetic industrial diamond grit products -- Single-particle compressive failure strength --
"DiaTest-SI" system 60.60 TC 29/SC 5
25.100.99 Other cutting tools
25.120 Chipless working equipment
ICS Field
25.120.01 Chipless working equipment in general
25.120.10 Forging equipment. Presses. Shears
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 6752:2008
Tools for pressing -- Round punches with 60 degrees conical head and straight shank 60.60 TC
29/SC 8
ISO 6753-1:2005
Tools for pressing and moulding -- Machined plates -- Part 1: Machined plates for press tools
90.60 TC 29/SC 8
ISO 6898:1984
Open front mechanical power presses -- Capacity ratings and dimensions 90.93 TC 39
ISO 6899:1984
Acceptance conditions of open front mechanical power presses -- Testing of the accuracy 90.93
TC 39
ISO 8020:2002
Tools for pressing -- Punches with cylindrical head and straight or reduced shank 90.93 TC
29/SC 8
ISO 8540:1993
Open front mechanical power presses -- Vocabulary 90.60 TC 39
ISO/DIS 8695
Tools for pressing -- Punches -- Nomenclature and terminology 40.99 TC 29/SC 8
ISO 8695:1987
Tools for pressing -- Punches -- Nomenclature and terminology 90.92 TC 29/SC 8
ISO 8977:2003
Tools for pressing -- Matrixes 90.93 TC 29/SC 8
ISO 9181:2007
Tools for pressing -- Round punches with 60 degrees conical head and reduced shank 60.60 TC
29/SC 8
ISO 9183-1:2008
Tools for pressing -- Wear plates for press dies -- Part 1: Type A 60.60 TC 29/SC 8
ISO 9183-2:1993
Tools for pressing -- Wear plates for press dies -- Part 2: Type B 90.60 TC 29/SC 8
ISO 9188:1993
Machine tools -- Straight-sided single-action mechanical power presses from 400 kN up to and
including 4 000 kN nominal force -- Characteristics and dimensions 90.60 TC 39
ISO 9189:1993
Machine tools -- Straight-sided high-speed mechanical power presses from 250 kN up to and
including 4 000 kN nominal force -- Characteristics and dimensions 90.60 TC 39
ISO 10069-1:2008
Tools for pressing -- Elastomer pressure springs -- Part 1: General specification 60.60 TC
29/SC 8
ISO 10069-2:2008
Tools for pressing -- Elastomer pressure springs -- Part 2: Specification of accessories 60.60
TC 29/SC 8
ISO 10071-1:2008
Tools for pressing -- Ball-lock punches -- Part 1: Ball-lock punches for light duty 60.60 TC
29/SC 8
ISO 10071-2:2005
Tools for pressing -- Ball-lock punches -- Part 2: Ball-lock punches for heavy duty 90.60 TC
29/SC 8
ISO 10242-1:1998
Tools for pressing -- Punch holder shanks -- Part 1: Type A 90.60 TC 29/SC 8
ISO 10242-2:2008
Tools for pressing -- Punch holder shanks -- Part 2: Type C 60.60 TC 29/SC 8
ISO 10242-3:2008
Tools for pressing -- Punch holder shanks -- Part 3: Type D 60.60 TC 29/SC 8
ISO/DIS 10243
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and
colour coding 40.60 TC 29/SC 8
ISO 10243:1991
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and
colour coding 90.92 TC 29/SC 8
ISO 11415:1997
Tools for pressing -- Die sets 90.92 TC 29/SC 8
ISO 11900-1:2007
Tools for pressing -- Ball-lock punch retainers -- Part 1: Types A and B, rectangular and
square for light duty 60.60 TC 29/SC 8
ISO 11900-2:2008
Tools for pressing -- Ball-lock punch retainers -- Part 2: Types C and D, reduced for light
duty 60.60 TC 29/SC 8
ISO 11900-3:2004
Tools for pressing -- Ball-lock punch retainers -- Part 3: Type E, reduced for heavy duty 90.93
TC 29/SC 8
ISO 11901-1:2003
Tools for pressing -- Gas springs -- Part 1: General specifications 90.60 TC 29/SC 8
ISO 11901-2:2004
Tools for pressing -- Gas springs -- Part 2: Specification of accessories 90.93 TC 29/SC 8
ISO 11903:2008
Tools for pressing -- Guide pillar mountings 60.60 TC 29/SC 8
ISO 16366:2008
Tools for pressing -- L-shaped guides 60.60 TC 29/SC 8
ISO 16367:2008
Tools for pressing -- Guide plates -- U- and V-blocks 60.60 TC 29/SC 8
ISO 18084:2005
Press tools for tablets -- Punches and dies 90.60 TC 29/SC 8
ISO 23480:2008
Tools for pressing -- Sliding plates 60.60 TC 29/SC 8
ISO 23481:2008
Tools for pressing -- Cam driver plates 60.60 TC 29/SC 8
25.120.20 Rolling, extruding and drawing equipment
Standard and/or project TC
ISO 1651:1974
Tube drawing mandrels 90.93 TC 29
ISO 1651:1974/Amd 1:1982
60.60 TC 29
ISO 1684:1975
Wire, bar and tube drawing dies -- Specifications 90.93 TC 29
ISO 1684:1975/Amd 2:1982
60.60 TC 29
ISO 2804:1996
Wire, bar or tube drawing dies -- As-sintered pellets of hardmetal (carbide) -- Dimensions
90.93 TC 29
25.120.30 Moulding equipment
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 6751:1998
Tools for moulding -- Ejector pins with cylindrical head 90.60 TC 29/SC 8
ISO 6753-2:1998
Tools for pressing and moulding -- Machined plates -- Part 2: Machined plates for moulds 90.60
TC 29/SC 8
ISO 8017:2007
Tools for moulding -- Guide pillars, straight and shouldered, and locating guide pillars,
shouldered 60.60 TC 29/SC 8
ISO 8018:2007
Tools for moulding -- Guide bushes, headed, and locating guide bushes, headed 60.60 TC 29/SC 8
ISO 8404:2003
Tools for moulding -- Angle pins 90.60 TC 29/SC 8
ISO 8405:1998
Tools for moulding -- Ejector sleeves with cylindrical head -- Basic series for general
purposes 90.60 TC 29/SC 8
ISO 8406:2008
Tools for moulding -- Mould bases -- Round locating elements and spacers 60.60 TC 29/SC 8
ISO 8693:1998
Tools for moulding -- Flat ejector pins 90.60 TC 29/SC 8
ISO 8694:1998
Tools for moulding -- Shouldered ejector pins 90.60 TC 29/SC 8
ISO 9449:2007
Tools for moulding -- Centring sleeves 60.60 TC 29/SC 8
ISO 10072:2004
Tools for moulding -- Sprue bushes -- Dimensions 90.93 TC 29/SC 8
ISO 10073:2008
Tools for moulding -- Support pillars 60.60 TC 29/SC 8
ISO 10907-1:2008
Tools for moulding -- Locating rings -- Part 1: Locating rings for mounting without thermal
insulating sheets in small or medium moulds (types A and B) 60.60 TC 29/SC 8
ISO 10907-2:2007
Tools for moulding -- Locating rings -- Part 2: Locating rings for mounting with thermal
insulating sheets in small or medium moulds (types C and D) 60.60 TC 29/SC 8
ISO 12165:2000
Tools for moulding -- Components of compression and injection moulds and diecasting dies --
Terms and symbols 90.93 TC 29/SC 8
ISO 15600:2000
Tools for moulding -- Thermal insulating sheets for injection moulds 90.93 TC 29/SC 8
ISO 16915:2003
Tools for moulding -- Sprue pullers 90.60 TC 29/SC 8
ISO 16916:2004
Tools for moulding -- Tool specification sheet for injection moulds 90.93 TC 29/SC 8
ISO 24233:2008
Tools for moulding -- Tool specification sheet for diecasting dies 60.60 TC 29/SC 8
ISO/DIS 28238
Compression and injection moulds -- Components for gating systems -- Vocabulary 40.20 TC 29/SC
8
25.120.40 Electrochemical machines
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 11090-1:1998
Machine tools -- Test conditions for die sinking electro-discharge machines (EDM) --
Terminology and testing of accuracy -- Part 1: Single column machines (cross slide table type
and fixed table type) 90.60 TC 39/SC 2
ISO 11090-2:1998
Machine tools -- Test conditions for die sinking electro-discharge machines (EDM) --
Terminology and testing of accuracy -- Part 2: Two column machines (slide-head type and cross-
slide table type) 90.60 TC 39/SC 2
25.120.99 Other chipless working equipment
25.140 Hand-held tools
Tools for working with voltages, see 13.260
25.160 Welding, brazing and soldering
Including gas welding, electric welding, plasma welding, electron beam welding, plasma cutting,
etc.
ICS Field
25.160.01 Welding, brazing and soldering in general
Including welders' qualifications
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/TR 581:2005
Weldability -- Metallic materials -- General principles 60.60 TC 44/SC 7
ISO 3834-1:2005
Quality requirements for fusion welding of metallic materials -- Part 1: Criteria for the
selection of the appropriate level of quality requirements 90.93 TC 44/SC 10
ISO 3834-2:2005
Quality requirements for fusion welding of metallic materials -- Part 2: Comprehensive quality
requirements 90.93 TC 44/SC 10
ISO 3834-3:2005
Quality requirements for fusion welding of metallic materials -- Part 3: Standard quality
requirements 90.93 TC 44/SC 10
ISO 3834-4:2005
Quality requirements for fusion welding of metallic materials -- Part 4: Elementary quality
requirements 90.93 TC 44/SC 10
ISO 3834-5:2005
Quality requirements for fusion welding of metallic materials -- Part 5: Documents with which
it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO
3834-3 or ISO 3834-4 90.93 TC 44/SC 10
ISO 3834-5:2005/Cor 1:2007
60.60 TC 44/SC 10
ISO/TR 3834-6:2007
Quality requirements for fusion welding of metallic materials -- Part 6: Guidelines on
implementing ISO 3834 60.60 TC 44/SC 10
ISO/FDIS 4063
Welding and allied processes -- Nomenclature of processes and reference numbers 50.20 TC 44/SC
7
ISO 4063:1998
Welding and allied processes -- Nomenclature of processes and reference numbers 90.92 TC 44/SC
7
ISO 9606-1:1994
Approval testing of welders -- Fusion welding -- Part 1: Steels 90.92 TC 44/SC 11
ISO/DIS 9606-1.3
Qualification testing of welders -- Fusion welding -- Part 1: Steels 40.60 TC 44/SC 11
ISO 9606-1:1994/Amd 1:1998
60.60 TC 44/SC 11
ISO 9606-2:2004
Qualification test of welders -- Fusion welding -- Part 2: Aluminium and aluminium alloys 90.93
TC 44/SC 11
ISO 9606-3:1999
Approval testing of welders -- Fusion welding -- Part 3: Copper and copper alloys 90.93 TC
44/SC 11
ISO 9606-4:1999
Approval testing of welders -- Fusion welding -- Part 4: Nickel and nickel alloys 90.93 TC
44/SC 11
ISO 9606-5:2000
Approval testing of welders -- Fusion welding -- Part 5: Titanium and titanium alloys,
zirconium and zirconium alloys 90.93 TC 44/SC 11
ISO 10882-1:2001
Health and safety in welding and allied processes -- Sampling of airborne particles and gases
in the operator's breathing zone -- Part 1: Sampling of airborne particles 90.92 TC 44/SC 9
ISO/CD 10882-1
Health and safety in welding and allied processes -- Sampling of airborne particles and gases
in the operator's breathing zone -- Part 1: Sampling of airborne particles 30.60 TC 44/SC 9
ISO 10882-2:2000
Health and safety in welding and allied processes -- Sampling of airborne particles and gases
in the operator's breathing zone -- Part 2: Sampling of gases 90.93 TC 44/SC 9
ISO 11611:2007
Protective clothing for use in welding and allied processes 60.60 TC 94/SC 13
ISO/DIS 11745
Brazing for aerospace applications -- Qualification test of brazers and brazing operators --
Brazing of metallic components 40.20 TC 44
ISO 14554-1:2000
Quality requirements for welding -- Resistance welding of metallic materials -- Part 1:
Comprehensive quality requirements 90.93 TC 44/SC 6
ISO 14554-2:2000
Quality requirements for welding -- Resistance welding of metallic materials -- Part 2:
Elementary quality requirements 90.93 TC 44/SC 6
ISO 14731:2006
Welding coordination -- Tasks and responsibilities 60.60 TC 44/SC 11
ISO 14732:1998
Welding personnel -- Approval testing of welding operators for fusion welding and of resistance
weld setters for fully mechanized and automatic welding of metallic materials 90.92 TC 44/SC 11
ISO/TR 15608:2005
Welding -- Guidelines for a metallic materials grouping system 60.60 TC 44/SC 10
ISO 15611:2003
Specification and qualification of welding procedures for metallic materials -- Qualification
based on previous welding experience 90.93 TC 44/SC 10
ISO 15618-1:2001
Qualification testing of welders for underwater welding -- Part 1: Diver-welders for hyperbaric
wet welding 90.93 TC 44/SC 11
ISO 15618-2:2001
Qualification testing of welders for underwater welding -- Part 2: Diver-welders and welding
operators for hyperbaric dry welding 90.93 TC 44/SC 11
ISO 17663:2009
Welding -- Quality requirements for heat treatment in connection with welding and allied
processes 60.60 TC 44/SC 10
ISO 17846:2004
Welding and allied processes -- Health and safety -- Wordless precautionary labels for
equipment and consumables used in arc welding and cutting 90.93 TC 44/SC 9
ISO 18278-1:2004
Resistance welding -- Weldability -- Part 1: Assessment of weldability for resistance spot,
seam and projection welding of metallic materials 90.92 TC 44/SC 6
ISO 24394:2008
Welding for aerospace applications -- Qualification test for welders and welding operators --
Fusion welding of metallic components 60.60 TC 44
ISO/DIS 25239-3
Friction stir welding -- Aluminium -- Part 3: Qualification of welding operators 40.93 IIW
25.160.10 Welding processes
Including thermal cutting and cladding
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 857-1:1998
Welding and allied processes -- Vocabulary -- Part 1: Metal welding processes 90.60 TC 44/SC 7
ISO 9013:2002
Thermal cutting -- Classification of thermal cuts -- Geometrical product specification and
quality tolerances 90.93 TC 44/SC 8
ISO 9692-2:1998
Welding and allied processes -- Joint preparation -- Part 2: Submerged arc welding of steels
90.93 TC 44/SC 7
ISO 9692-3:2000
Welding and allied processes -- Recommendations for joint preparation -- Part 3: Metal inert
gas welding and tungsten inert gas welding of aluminium and its alloys 90.93 TC 44/SC 7
ISO 11970:2001
Specification and approval of welding procedures for production welding of steel castings 90.60
TC 17/SC 11
ISO 13916:1996
Welding -- Guidance on the measurement of preheating temperature, interpass temperature and
preheat maintenance temperature 90.93 TC 44/SC 10
ISO 13918:2008
Welding -- Studs and ceramic ferrules for arc stud welding 60.60 TC 44/SC 10
ISO 13920:1996
Welding -- General tolerances for welded constructions -- Dimensions for lengths and angles --
Shape and position 90.93 TC 44/SC 10
ISO 14327:2004
Resistance welding -- Procedures for determining the weldability lobe for resistance spot,
projection and seam welding 90.93 TC 44/SC 6
ISO/DIS 14344.2
Welding and allied processes -- Procurement of welding consumables 40.20 TC 44/SC 3
ISO 14373:2006
Resistance welding -- Procedure for spot welding of uncoated and coated low carbon steels 90.20
IIW
ISO 14555:2006
Welding -- Arc stud welding of metallic materials 60.60 TC 44/SC 10
ISO 15011-1:2002
Health and safety in welding and allied processes -- Laboratory method for sampling fume and
gases generated by arc welding -- Part 1: Determination of emission rate and sampling for
analysis of particulate fume 90.92 TC 44/SC 9
ISO/FDIS 15011-1
Health and safety in welding and allied processes -- Laboratory method for sampling fume and
gases -- Part 1: Determination of fume emission rate during arc welding and collection of fume
for analysis 50.20 TC 44/SC 9
ISO 15011-2:2003
Health and safety in welding and allied processes -- Laboratory method for sampling fume and
gases generated by arc welding -- Part 2: Determination of emission rates of gases, except
ozone 90.92 TC 44/SC 9
ISO/FDIS 15011-2
Health and safety in welding and allied processes -- Laboratory method for sampling fume and
gases -- Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide
(CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and
gouging 50.20 TC 44/SC 9
ISO/FDIS 15011-3
Health and safety in welding and allied processes -- Laboratory method for sampling fume and
gases -- Part 3: Determination of ozone emission rate during arc welding 50.20 TC 44/SC 9
ISO 15011-4:2006
Health and safety in welding and allied processes -- Laboratory method for sampling fume and
gases -- Part 4: Fume data sheets 90.20 TC 44/SC 9
ISO 15011-4:2006/Amd 1:2008
60.60 TC 44/SC 9
ISO/TS 15011-5:2006
Health and safety in welding and allied processes -- Laboratory method for sampling fume and
gases -- Part 5: Identification of thermal-degradation products generated when welding or
cutting through products composed wholly or partly of organic materials 90.92 TC 44/SC 9
ISO/CD 15011-5
Health and safety in welding and allied processes -- Laboratory method for sampling fume and
gases -- Part 5: Identification of thermal-degradation products generated when welding or
cutting through products composed wholly or partly of organic materials 30.60 TC 44/SC 9
ISO/NP TS 15011-6
Health and safety in welding and allied processes -- Laboratory method for sampling fume and
gases -- Part 6: Procedure for quantitative determination of fume from resistance spot welding
10.99 TC 44/SC 9
ISO 15607:2003
Specification and qualification of welding procedures for metallic materials -- General rules
90.93 TC 44/SC 10
ISO 15607:2003/Cor 1:2005
60.60 TC 44/SC 10
ISO 15609-1:2004
Specification and qualification of welding procedures for metallic materials -- Welding
procedure specification -- Part 1: Arc welding 90.93 TC 44/SC 10
ISO 15609-1:2004/Cor 1:2005
60.60 TC 44/SC 10
ISO 15609-2:2001
Specification and qualification of welding procedures for metallic materials -- Welding
procedure specification -- Part 2: Gas welding 90.93 TC 44/SC 10
ISO 15609-3:2004
Specification and qualification of welding procedures for metallic materials -- Welding
procedure specification -- Part 3: Electron beam welding 90.93 TC 44/SC 10
ISO 15609-4:2009
Specification and qualification of welding procedures for metallic materials -- Welding
procedure specification -- Part 4: Laser beam welding 60.60 TC 44/SC 10
ISO 15609-5:2004
Specification and qualification of welding procedures for metallic materials -- Welding
procedure specification -- Part 5: Resistance welding 90.92 TC 44/SC 6
ISO/NP 15609-5
Specification and qualification of welding procedures for metallic materials -- Welding
procedure specification -- Part 5: Resistance welding 10.99 TC 44/SC 6
ISO 15610:2003
Specification and qualification of welding procedures for metallic materials -- Qualification
based on tested welding consumables 90.93 TC 44/SC 10
ISO 15612:2004
Specification and qualification of welding procedures for metallic materials -- Qualification
by adoption of a standard welding procedure 90.93 TC 44/SC 10
ISO 15613:2004
Specification and qualification of welding procedures for metallic materials -- Qualification
based on pre-production welding test 90.93 TC 44/SC 10
ISO 15614-1:2004
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 1: Arc and gas welding of steels and arc welding of nickel and nickel
alloys 90.92 TC 44/SC 10
ISO 15614-1:2004/Amd 1:2008
90.92 TC 44/SC 10
ISO 15614-1:2004/Cor 1:2005
90.92 TC 44/SC 10
ISO 15614-2:2005
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 2: Arc welding of aluminium and its alloys 90.93 TC 44/SC 10
ISO 15614-2:2005/Cor 1:2005
60.60 TC 44/SC 10
ISO 15614-2:2005/Cor 2:2009
60.60 TC 44/SC 10
ISO 15614-3:2008
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 3: Fusion welding of non-alloyed and low-alloyed cast irons 60.60 TC
44/SC 10
ISO 15614-4:2005
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 4: Finishing welding of aluminium castings 90.93 TC 44/SC 10
ISO 15614-4:2005/Cor 1:2007
60.60 TC 44/SC 10
ISO 15614-5:2004
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 5: Arc welding of titanium, zirconium and their alloys 90.93 TC 44/SC 10
ISO 15614-6:2006
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 6: Arc and gas welding of copper and its alloys 90.20 TC 44/SC 10
ISO 15614-7:2007
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 7: Overlay welding 60.60 TC 44/SC 10
ISO 15614-8:2002
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 8: Welding of tubes to tube-plate joints 90.93 TC 44/SC 10
ISO 15614-10:2005
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 10: Hyperbaric dry welding 90.93 TC 44/SC 10
ISO 15614-11:2002
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 11: Electron and laser beam welding 90.93 TC 44/SC 10
ISO 15614-12:2004
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 12: Spot, seam and projection welding 90.93 TC 44/SC 6
ISO 15614-13:2005
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 13: Resistance butt and flash welding 90.92 TC 44/SC 6
ISO/NP 15614-13
Specification and qualification of welding procedures for metallic materials -- Welding
procedure test -- Part 13: Resistance butt and flash welding 10.99 TC 44/SC 6
ISO 15620:2000
Welding -- Friction welding of metallic materials 90.93 TC 44/SC 10
ISO 16432:2006
Resistance welding -- Procedure for projection welding of uncoated and coated low carbon steels
using embossed projection(s) 90.20 IIW
ISO 16433:2006
Resistance welding -- Procedure for seam welding of uncoated and coated low carbon steels 90.20
IIW
ISO 17652-1:2003
Welding -- Test for shop primers in relation to welding and allied processes -- Part 1: General
requirements 90.93 TC 44/SC 10
ISO 17652-2:2003
Welding -- Test for shop primers in relation to welding and allied processes -- Part 2: Welding
properties of shop primers 90.93 TC 44/SC 10
ISO 17652-3:2003
Welding -- Test for shop primers in relation to welding and allied processes -- Part 3: Thermal
cutting 90.93 TC 44/SC 10
ISO 17652-4:2003
Welding -- Test for shop primers in relation to welding and allied processes -- Part 4:
Emission of fumes and gases 90.93 TC 44/SC 10
ISO 17657-1:2005
Resistance welding -- Welding current measurement for resistance welding -- Part 1: Guidelines
for measurement 90.60 TC 44/SC 6
ISO 17657-2:2005
Resistance welding -- Welding current measurement for resistance welding -- Part 2: Welding
current meter with current sensing coil 90.60 TC 44/SC 6
ISO 17657-3:2005
Resistance welding -- Welding current measurement for resistance welding -- Part 3: Current
sensing coil 90.60 TC 44/SC 6
ISO 17657-4:2005
Resistance welding -- Welding current measurement for resistance welding -- Part 4: Calibration
system 90.60 TC 44/SC 6
ISO 17657-5:2005
Resistance welding -- Welding current measurement for resistance welding -- Part 5:
Verification of welding current measuring system 90.60 TC 44/SC 6
ISO 17658:2002
Welding -- Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts -- Terminology
90.93 TC 44/SC 7
ISO 17660-1:2006
Welding -- Welding of reinforcing steel -- Part 1: Load-bearing welded joints 60.60 TC 44/SC 10
ISO 17660-2:2006
Welding -- Welding of reinforcing steel -- Part 2: Non load-bearing welded joints 60.60 TC
44/SC 10
ISO/TR 17671-1:2002
Welding -- Recommendations for welding of metallic materials -- Part 1: General guidance for
arc welding 60.60 TC 44/SC 10
ISO/TR 17671-2:2002
Welding -- Recommendations for welding of metallic materials -- Part 2: Arc welding of ferritic
steels 60.60 TC 44/SC 10
ISO/TR 17671-3:2002
Welding -- Recommendations for welding of metallic materials -- Part 3: Arc welding of
stainless steels 60.60 TC 44/SC 10
ISO/TR 17671-4:2002
Welding -- Recommendations for welding of metallic materials -- Part 4: Arc welding of
aluminium and aluminium alloys 60.60 TC 44/SC 10
ISO/TR 17671-5:2004
Welding -- Recommendations for welding of metallic materials -- Part 5: Welding of clad steels
60.60 TC 44/SC 10
ISO/TR 17671-6:2005
Welding -- Recommendations for welding of metallic materials -- Part 6: Laser beam welding
60.60 TC 44/SC 10
ISO/TR 17671-7:2004
Welding -- Recommendations for welding of metallic materials -- Part 7: Electron beam welding
60.60 TC 44/SC 10
ISO 17677-1
Resistance welding -- Vocabulary -- Part 1: Spot, projection and seam welding 60.00 TC 44/SC 6
ISO/TR 17844:2004
Welding -- Comparison of standardised methods for the avoidance of cold cracks 60.60 TC 44/SC
10
ISO 18594:2007
Resistance spot-, projection- and seam-welding -- Method for determining the transition
resistance on aluminium and steel material 60.60 TC 44/SC 6
ISO 18595:2007
Resistance welding -- Spot welding of aluminium and aluminium alloys -- Weldability, welding
and testing 60.60 TC 44/SC 6
ISO/TR 22824:2003
Welding consumables -- Predicted and measured FN in specifications -- A position statement of
the experts of IIW Commission IX 60.60 IIW
ISO/DIS 25239-1
Friction stir welding -- Aluminium -- Part 1: Vocabulary 40.93 IIW
ISO/DIS 25239-2
Friction stir welding -- Aluminium -- Part 2: Design of weld joints 40.93 IIW
ISO/DIS 25239-3
Friction stir welding -- Aluminium -- Part 3: Qualification of welding operators 40.93 IIW
ISO/DIS 25239-4
Friction stir welding -- Aluminium -- Part 4: Specification and qualification of welding
procedures 40.93 IIW
ISO/DIS 25239-5
Friction stir welding -- Aluminium -- Part 5: Quality and inspection requirements 40.93 IIW
ISO/TR 25901:2007
Welding and related processes -- Vocabulary 60.60 TC 44/SC 7
25.160.20 Welding consumables
Including electrodes, filler metals, gases, etc.
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/CD 544
Welding consumables -- Technical delivery conditions for welding filler materials -- Type of
product, dimensions, tolerances and markings 30.60 TC 44/SC 3
ISO 544:2003
Welding consumables -- Technical delivery conditions for welding filler materials -- Type of
product, dimensions, tolerances and markings 90.92 TC 44/SC 3
ISO 636:2004
Welding consumables -- Rods, wires and deposits for tungsten inert gas welding of non-alloy and
fine-grain steels -- Classification 90.93 TC 44/SC 3
ISO 1071:2003
Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion
welding of cast iron - Classification 90.93 TC 44/SC 3
ISO 2401:1972
Covered electrodes -- Determination of the efficiency, metal recovery and deposition
coefficient 90.93 TC 44/SC 3
ISO 2560:2002
Welding consumables -- Covered electrodes for manual metal arc welding of non-alloy and fine
grain steels -- Classification 90.92 TC 44/SC 3
ISO/FDIS 2560
Welding consumables -- Covered electrodes for manual metal arc welding of non-alloy and fine
grain steels -- Classification 50.00 TC 44/SC 3
ISO/DIS 3580.2
Welding consumables -- Covered electrodes for manual metal arc welding of creep-resisting
steels -- Classification 40.20 TC 44/SC 3
ISO 3580:2004
Welding consumables -- Covered electrodes for manual metal arc welding of creep-resisting
steels -- Classification 90.92 IIW
ISO 3581:2003
Welding consumables -- Covered electrodes for manual metal arc welding of stainless and heat-
resisting steels -- Classification 90.93 TC 44/SC 3
ISO 3581:2003/Cor 1:2008
60.60 TC 44/SC 3
ISO 5182:2008
Resistance welding -- Materials for electrodes and ancillary equipment 60.60 TC 44/SC 6
ISO 5184:1979
Straight resistance spot welding electrodes 90.93 TC 44/SC 6
ISO 6847:2000
Welding consumables -- Deposition of a weld metal pad for chemical analysis 90.93 IIW
ISO 6848:2004
Arc welding and cutting -- Nonconsumable tungsten electrodes -- Classification 90.93 TC 44/SC 3
ISO/PRF TR 13393
Welding consumables -- Hardfacing classification -- Microstructures 50.00 IIW
ISO 14171:2002
Welding consumables -- Wire electrodes and wire-flux combinations for submerged arc welding of
non alloy and fine grain steels -- Classification 90.92 TC 44/SC 3
ISO/DIS 14171
Welding consumables -- Solid wire electrodes, tubular cored electrodes and electrode/flux
combinations for submerged arc welding of non alloy and fine grain steels -- Classification
40.60 TC 44/SC 3
ISO 14172:2008
Welding consumables -- Covered electrodes for manual metal arc welding of nickel and nickel
alloys -- Classification 60.60 TC 44/SC 3
ISO 14174:2004
Welding consumables -- Fluxes for submerged arc welding -- Classification 90.92 TC 44/SC 3
ISO/DIS 14174
Welding consumables -- Fluxes for submerged arc welding and electroslag welding --
Classification 40.60 TC 44/SC 3
ISO 14175:2008
Welding consumables -- Gases and gas mixtures for fusion welding and allied processes 60.60 TC
44/SC 3
ISO/DIS 14341
Welding consumables -- Wire electrodes and deposits for gas shielded metal arc welding of non
alloy and fine grain steels -- Classification 40.60 TC 44/SC 3
ISO 14341:2002
Welding consumables -- Wire electrodes and deposits for gas shielded metal arc welding of non
alloy and fine grain steels -- Classification 90.92 TC 44/SC 3
ISO/FDIS 14343
Welding consumables -- Wire electrodes, strip electrodes, wires and rods for arc welding of
stainless and heat resisting steels -- Classification 50.00 TC 44/SC 3
ISO 14343:2002
Welding consumables -- Wire electrodes, strip electrodes, wires and rods for fusion welding of
stainless and heat resisting steels -- Classification 90.92 IIW
ISO 14343:2002/Amd 1:2006
Addition of strip electrodes for submerged arc welding and electroslag welding 90.92 IIW
ISO 14344:2002
Welding and allied processes -- Flux and gas shielded electrical welding processes --
Procurement guidelines for consumables 90.92 IIW
ISO 14372:2000
Welding consumables -- Determination of moisture resistance of manual metal arc welding
electrodes by measurement of diffusible hydrogen 90.92 IIW
ISO 15792-1:2000
Welding consumables -- Test methods -- Part 1: Test methods for all-weld metal test specimens
in steel, nickel and nickel alloys 90.93 TC 44/SC 3
ISO 15792-2:2000
Welding consumables -- Test methods -- Part 2: Preparation of single-run and two-run technique
test specimens in steel 90.93 TC 44/SC 3
ISO 15792-3:2000
Welding consumables -- Test methods -- Part 3: Classification testing of positional capacity
and root penetration of welding consumables in a fillet weld 90.93 TC 44/SC 3
ISO 15792-3:2000/Cor 1:2006
60.60 TC 44/SC 3
ISO 16834:2006
Welding consumables -- Wire electrodes, wires, rods and deposits for gas-shielded arc welding
of high strength steels -- Classification 90.60 TC 44/SC 3
ISO 17632:2004
Welding consumables -- Tubular cored electrodes for gas shielded and non-gas shielded metal arc
welding of non-alloy and fine grain steels -- Classification 90.93 TC 44/SC 3
ISO/DIS 17633
Welding consumables -- Tubular cored electrodes and rods for gas shielded and non-gas shielded
metal arc welding of stainless and heat-resisting steels -- Classification 40.20 TC 44/SC 3
ISO 17633:2004
Welding consumables -- Tubular cored electrodes and rods for gas shielded and non-gas shielded
metal arc welding of stainless and heat-resisting steels -- Classification 90.92 TC 44/SC 3
ISO 17634:2004
Welding consumables -- Tubular cored electrodes for gas shielded metal arc welding of creep-
resisting steels -- Classification 90.93 TC 44/SC 3
ISO 18273:2004
Welding consumables -- Wire electrodes, wires and rods for welding of aluminium and aluminium
alloys -- Classification 90.93 TC 44/SC 3
ISO/DIS 18274
Welding consumables -- Wire and strip electrodes, wires and rods for fusion welding of nickel
and nickel alloys -- Classification 40.20 TC 44/SC 3
ISO 18274:2004
Welding consumables -- Wire and strip electrodes, wires and rods for fusion welding of nickel
and nickel alloys -- Classification 90.92 TC 44/SC 3
ISO 18274:2004/Cor 1:2005
60.60 TC 44/SC 3
ISO 18274:2004/Cor 2:2006
60.60 TC 44/SC 3
ISO/CD 18275
Welding consumables -- Covered electrodes for manual metal arc welding of high-strength steels
-- Classification 30.60 TC 44/SC 3
ISO 18275:2005
Welding consumables -- Covered electrodes for manual metal arc welding of high-strength steels
-- Classification 90.92 TC 44/SC 3
ISO 18275:2005/Cor 1:2007
90.92 TC 44/SC 3
ISO 18276:2005
Welding consumables -- Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc
welding of high-strength steels -- Classification 90.93 TC 44/SC 3
ISO/TR 20172:2006
Welding -- Grouping systems for materials -- European materials 90.92 TC 44/SC 10
ISO/TR 20172
Welding -- Grouping systems for materials -- European materials 60.00 TC 44/SC 10
ISO/PRF TR 20173
Welding -- Grouping systems for materials -- American materials 50.20 TC 44/SC 10
ISO/TR 20173:2005
Welding -- Grouping systems for materials -- American materials 90.92 TC 44/SC 10
ISO/TR 20174:2005
Welding -- Grouping systems for materials -- Japanese materials 60.60 TC 44/SC 10
ISO 21952:2007
Welding consumables -- Wire electrodes, wires, rods and deposits for gas-shielded arc welding
of creep-resisting steels -- Classification 60.60 TC 44/SC 3
ISO/DIS 24034
Welding consumables -- Solid wires and rods for fusion welding of titanium and titanium alloys
-- Classification 40.20 TC 44/SC 3
ISO 24034:2005
Welding consumables -- Solid wires and rods for fusion welding of titanium and titanium alloys
-- Classification 90.92 TC 44/SC 3
ISO 24034:2005/Amd 1:2008
. 90.92 TC 44/SC 3
ISO 24373:2008
Welding consumables -- Solid wires and rods for fusion welding of copper and copper alloys --
Classification 60.60 TC 44/SC 3
ISO 24598:2007
Welding consumables -- Solid wire electrodes, tubular cored electrodes and electrode/flux
combinations for submerged arc welding of creep-resisting steels -- Classification 60.60 TC
44/SC 3
ISO 26304:2008
Welding consumables -- Solid wire electrodes, tubular cored electrodes and electrode-flux
combinations for submerged arc welding of high strength steels -- Classification 60.60 TC 44/SC
3
ISO 26304:2008/Cor 1:2009
60.60 TC 44/SC 3
25.160.30 Welding equipment
Including thermal cutting equipment
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 669:2000
Resistance welding -- Resistance welding equipment -- Mechanical and electrical requirements
90.92 TC 44/SC 6
ISO 693:1982
Dimensions of seam welding wheel blanks 90.93 TC 44/SC 6
ISO 865:1981
Slots in platens for projection welding machines 90.93 TC 44/SC 6
ISO 1089:1980
Electrode taper fits for spot welding equipment -- Dimensions 90.93 TC 44/SC 6
ISO/FDIS 2503
Gas welding equipment -- Pressure regulators and pressure regulators with flow-metering devices
for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) 50.20 TC
44/SC 8
ISO 2503:1998
Gas welding equipment -- Pressure regulators for gas cylinders used in welding, cutting and
allied processes up to 300 bar 90.92 TC 44/SC 8
ISO 3253:1998
Gas welding equipment -- Hose connections for equipment for welding, cutting and allied
processes 90.93 TC 44/SC 8
ISO 3821:2008
Gas welding equipment -- Rubber hoses for welding, cutting and allied processes 60.60 TC 44/SC
8
ISO 5171:2009
Gas welding equipment -- Pressure gauges used in welding, cutting and allied processes 60.60 TC
44/SC 8
ISO 5172:2006
Gas welding equipment -- Blowpipes for gas welding, heating and cutting -- Specifications and
tests 90.20 TC 44/SC 8
ISO 5172:2006/CD Amd 1
30.20 TC 44/SC 8
ISO 5175:1987
Equipment used in gas welding, cutting and allied processes -- Safety devices for fuel gases
and oxygen or compressed air -- General specifications, requirements and tests 90.93 TC 44/SC 8
ISO 5183-1:1998
Resistance welding equipment -- Electrode adaptors, male taper 1:10 -- Part 1: Conical fixing,
taper 1:10 90.60 TC 44/SC 6
ISO 5183-2:2000
Resistance spot welding -- Electrode adaptors, male taper 1:10 -- Part 2: Parallel shank fixing
for end-thrust electrodes 90.93 TC 44/SC 6
ISO 5821:2009
Resistance welding -- Spot welding electrode caps 60.60 TC 44/SC 6
ISO 5822:1988
Spot welding equipment -- Taper plug gauges and taper ring gauges 90.60 TC 44/SC 6
ISO 5826:1999
Resistance welding equipment -- Transformers -- General specifications applicable to all
transformers 90.93 TC 44/SC 6
ISO 5827:1983
Spot welding -- Electrode back-ups and clamps 90.60 TC 44/SC 6
ISO 5828:2001
Resistance welding equipment -- Secondary connecting cables with terminals connected to water-
cooled lugs -- Dimensions and characteristics 90.93 TC 44/SC 6
ISO 5829:1984
Resistance spot welding -- Electrode adaptors, female taper 1 : 10 90.93 TC 44/SC 6
ISO 5830:1984
Resistance spot welding -- Male electrode caps 90.93 TC 44/SC 6
ISO 6210-1:1991
Cylinders for robot resistance welding guns -- Part 1: General requirements 90.93 TC 44/SC 6
http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment