Lastest & Cheapest ISO Standards In PDF (58)

http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.

ICS Field
ISO 29468:2008
Thermal insulating products for building applications -- Determination of flatness 60.60 TC 163/SC 1
ISO 29469:2008
Thermal insulating products for building applications -- Determination of compression behaviour 60.60 TC 163/SC 1
ISO 29470:2008
Thermal insulating products for building applications -- Determination of the apparent density 60.60 TC 163/SC 1
ISO 29471:2008
Thermal insulating products for building applications -- Determination of dimensional stability under constant normal laboratory conditions (23 degrees C/50 % relative humidity) 60.60 TC 163/SC 1
ISO 29472:2008
Thermal insulating products for building applications -- Determination of dimensional stability under specified temperature and humidity conditions 60.60 TC 163/SC 1
ISO 29764:2008
Thermal insulating products for building applications -- Determination of deformation under specified compressive load and temperature conditions 60.60 TC 163/SC 1
ISO 29765:2008
Thermal insulating products for building applications -- Determination of tensile strength perpendicular to faces 60.60 TC 163/SC 1
ISO 29766:2008
Thermal insulating products for building applications -- Determination of tensile strength parallel to faces 60.60 TC 163/SC 1
ISO 29767:2008
Thermal insulating products for building applications -- Determination of short-term water absorption by partial immersion 60.60 TC 163/SC 1
ISO 29768:2008
Thermal insulating products for building applications -- Determination of linear dimensions of test specimens 60.60 TC 163/SC 1
ISO 29769:2008
Thermal insulating products for building applications -- Determination of behaviour under point load 60.60 TC 163/SC 1
ISO 29770:2008
Thermal insulating products for building applications -- Determination of thickness for floating-floor insulating products 60.60 TC 163/SC 1
ISO 29771:2008
Thermal insulating materials for building applications -- Determination of organic content 60.60 TC 163/SC 1
ISO/FDIS 29803
Thermal insulation products for building applications -- Determination of the resistance to impact of external thermal insulation composite systems (ETICS) 50.00 TC 163/SC 1
ISO/FDIS 29804
Thermal insulation products for building applications -- Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material 50.00 TC 163/SC 1
ISO/FDIS 29805
Thermal insulation products for building applications -- Determination of the mechanical properties of glass fibre meshes 50.20 TC 163/SC 1

91.100.99 Other construction materials

91.120 Protection of and in buildings
Alarm and warning systems, see 13.320
Emergencies in buildings, see 13.200
Fire protection, see 13.220.20
Fire resistance of building materials and elements, see 13.220.50
ICS Field
91.120.01 Protection of and in buildings in general
91.120.10 Thermal insulation of buildings
Thermal insulating materials, see 91.100.60
Thermal insulation in general, see 27.220
Standard and/or project TC
ISO 6242-1:1992
Building construction -- Expression of users' requirements -- Part 1: Thermal requirements 90.93 TC 59/SC 3
ISO 6781:1983
Thermal insulation -- Qualitative detection of thermal irregularities in building envelopes -- Infrared method 90.92 TC 163/SC 1
ISO 6946:2007
Building components and building elements -- Thermal resistance and thermal transmittance -- Calculation method 60.60 TC 163/SC 2
ISO/TR 9165:1988
Practical thermal properties of building materials and products 90.60 TC 163/SC 2
ISO 9869:1994
Thermal insulation -- Building elements -- In-situ measurement of thermal resistance and thermal transmittance 90.93 TC 163/SC 1
ISO 9972:2006
Thermal performance of buildings -- Determination of air permeability of buildings -- Fan pressurization method 90.20 TC 163/SC 1
ISO 9972:2006/Amd 1:2009
60.60 TC 163/SC 1
ISO 10077-1:2006
Thermal performance of windows, doors and shutters -- Calculation of thermal transmittance -- Part 1: General 90.20 TC 163/SC 2
ISO 10077-2:2003
Thermal performance of windows, doors and shutters -- Calculation of thermal transmittance -- Part 2: Numerical method for frames 90.92 TC 163
ISO/DIS 10077-2
Thermal performance of windows, doors and shutters -- Calculation of thermal transmittance -- Part 2: Numerical method for frames 40.20 TC 163/SC 2
ISO 10211:2007
Thermal bridges in building construction -- Heat flows and surface temperatures -- Detailed calculations 60.60 TC 163/SC 2
ISO 10456:2007
Building materials and products -- Hygrothermal properties -- Tabulated design values and procedures for determining declared and design thermal values 60.60 TC 163/SC 2
ISO 12241:2008
Thermal insulation for building equipment and industrial installations -- Calculation rules 60.60 TC 163/SC 2
ISO 12567-1:2000
Thermal performance of windows and doors -- Determination of thermal transmittance by hot box method -- Part 1: Complete windows and doors 90.92 TC 163/SC 1
ISO/DIS 12567-1
Thermal performance of windows and doors -- Determination of thermal transmittance by the hot-box method -- Part 1: Complete windows and doors 40.20 TC 163/SC 1
ISO 12567-2:2005
Thermal performance of windows and doors -- Determination of thermal transmittance by hot box method -- Part 2: Roof windows and other projecting windows 90.93 TC 163/SC 1
ISO 12569:2000
Thermal performance of buildings -- Determination of air change in buildings -- Tracer gas dilution method 90.93 TC 163/SC 1
ISO 12572:2001
Hygrothermal performance of building materials and products -- Determination of water vapour transmission properties 90.92 TC 163/SC 1
ISO/NP 12572
Hygrothermal performance of building materials and products -- Determination of water vapour transmission properties 10.99 TC 163/SC 1
ISO/DIS 12574-1
Thermal insulation -- Cellulose-fibre loose-fill for horizontal applications in ventilated roof spaces -- Part 1: Material specification 40.99 TC 163/SC 3
ISO 12574-2:2008
Thermal insulation -- Cellulose-fibre loose-fill for horizontal applications in ventilated roof spaces -- Part 2: Principal responsibilities of installers 60.60 TC 163/SC 3
ISO/DIS 12574-3
Thermal insulation -- Cellulose-fibre loose-fill for horizontal applications in ventilated roof spaces -- Part 3: Test methods 40.99 TC 163/SC 3
ISO/FDIS 12575-1
Thermal insulation -- Exterior insulating systems for foundations -- Part 1: Specification 50.92 TC 163/SC 3
ISO 12575-2:2007
Thermal insulation products -- Exterior insulating systems for foundations -- Part 2: Principal responsibilities of installers 60.60 TC 163/SC 3
ISO/NP 12631
Thermal performance of curtain walling 10.99 TC 163/SC 2
ISO/NP 12655
Presentation of real energy use of buildings 10.99 TC 163
ISO/WD 12842
Energy performance of buildings -- Definitions and general procedures for the overall energy performance rating and certification 20.20 TC 163
ISO 13370:2007
Thermal performance of buildings -- Heat transfer via the ground -- Calculation methods 60.60 TC 163/SC 2
ISO 13786:2007
Thermal performance of building components -- Dynamic thermal characteristics -- Calculation methods 60.60 TC 163/SC 2
ISO 13788:2001
Hygrothermal performance of building components and building elements -- Internal surface temperature to avoid critical surface humidity and interstitial condensation -- Calculation methods 90.92 TC 163/SC 2
ISO/NP 13788
Hygrothermal performance of building components and building elements -- Internal surface temperature to avoid critical surface humidity and interstitial condensation -- Calculation methods 10.99 TC 163/SC 2
ISO 13789:2007
Thermal performance of buildings -- Transmission and ventilation heat transfer coefficients -- Calculation method 60.60 TC 163/SC 2
ISO 13790:2008
Energy performance of buildings -- Calculation of energy use for space heating and cooling 60.60 TC 163/SC 2
ISO 13791:2004
Thermal performance of buildings -- Calculation of internal temperatures of a room in summer without mechanical cooling -- General criteria and validation procedures 90.92 TC 163/SC 2
ISO/CD 13791
Thermal performance of buildings -- Calculation of internal temperatures of a room in summer without mechanical cooling -- General criteria and validation procedures 30.60 TC 163/SC 2
ISO 13792:2005
Thermal performance of buildings -- Calculation of internal temperatures of a room in summer without mechanical cooling -- Simplified methods 90.92 TC 163/SC 2
ISO/CD 13792
Thermal performance of buildings -- Calculation of internal temperatures of a room in summer without mechanical cooling -- Simplified methods 30.60 TC 163/SC 2
ISO 13793:2001
Thermal performamce of buildings - Thermal design of foundations to avoid frost heave 90.93 TC 163/SC 2
ISO 14438:2002
Glass in building -- Determination of energy balance value -- Calculation method 90.93 TC 160/SC 2
ISO 14683:2007
Thermal bridges in building construction -- Linear thermal transmittance -- Simplified methods and default values 60.60 TC 163/SC 2
ISO 15099:2003
Thermal performance of windows, doors and shading devices -- Detailed calculations 90.60 TC 163
ISO 15758:2004
Hygrothermal performance of building equipment and industrial installations -- Calculation of water vapour diffusion -- Cold pipe insulation systems 90.92 TC 163/SC 2
ISO 15927-1:2003
Hygrothermal performance of buildings -- Calculation and presentation of climatic data -- Part 1: Monthly means of single meteorological elements 90.93 TC 163/SC 2
ISO 15927-2:2009
Hygrothermal performance of buildings -- Calculation and presentation of climatic data -- Part 2: Hourly data for design cooling load 60.60 TC 163/SC 2
ISO 15927-3:2009
Hygrothermal performance of buildings - Calculation and presentation of climatic data -- Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data 60.60 TC 163/SC 2
ISO 15927-4:2005
Hygrothermal performance of buildings -- Calculation and presentation of climatic data -- Part 4: Hourly data for assessing the annual energy use for heating and cooling 90.60 TC 163/SC 2
ISO 15927-5:2004
Hygrothermal performance of buildings -- Calculation and presentation of climatic data -- Part 5: Data for design heat load for space heating 90.60 TC 163/SC 2
ISO 15927-6:2007
Hygrothermal performance of buildings -- Calculation and presentation of climatic data -- Part 6: Accumulated temperature differences (degree-days) 60.60 TC 163/SC 2
ISO/DIS 18292
Energy performance of fenestration systems -- Calculation procedure 40.20 TC 163/SC 2
ISO/DIS 18393-1
Thermal insulation products -- Determination of ageing by settlement -- Part 1: Blown loose fill for ventilated attics 40.60 TC 163/SC 1
ISO 21129:2007
Hygrothermal performance of building materials and products -- Determination of water-vapour transmission properties -- Box method 60.60 TC 163/SC 1
ISO 23993:2008
Thermal insulation products for building equipment and industrial installations -- Determination of design thermal conductivity 60.60 TC 163/SC 2

91.120.20 Acoustics in building. Sound insulation
Acoustic measurements and noise abatement in general, see 17.140.01
Sound insulating materials, see 91.100.60
Standard and/or project TC
ISO 140-1:1997
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 1: Requirements for laboratory test facilities with suppressed flanking transmission 90.92 TC 43/SC 2
ISO 140-1:1997/Amd 1:2004
Specific requirements on the frame of the test opening for lightweight twin leaf partitions 60.60 TC 43/SC 2
ISO 140-2:1991
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 2: Determination, verification and application of precision data 90.92 TC 43/SC 2
ISO 140-2:1991/Cor 1:1993
90.92 TC 43/SC 2
ISO 140-3:1995
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 3: Laboratory measurements of airborne sound insulation of building elements 90.92 TC 43/SC 2
ISO 140-3:1995/Amd 1:2004
Installation guidelines for lightweight twin leaf partitions 60.60 TC 43/SC 2
ISO 140-4:1998
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 4: Field measurements of airborne sound insulation between rooms 90.60 TC 43/SC 2
ISO 140-5:1998
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 5: Field measurements of airborne sound insulation of fa?ade elements and fa?ades 90.93 TC 43/SC 2
ISO 140-6:1998
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 6: Laboratory measurements of impact sound insulation of floors 90.92 TC 43/SC 2
ISO 140-7:1998
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 7: Field measurements of impact sound insulation of floors 90.60 TC 43/SC 2
ISO 140-8:1997
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor 90.92 TC 43/SC 2
ISO 140-10:1991
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 10: Laboratory measurement of airborne sound insulation of small building elements 90.92 TC 43/SC 2
ISO 140-11:2005
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors 90.93 TC 43/SC 2
ISO 140-14:2004
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 14: Guidelines for special situations in the field 90.93 TC 43/SC 2
ISO 140-14:2004/Cor 1:2007
60.60 TC 43/SC 2
ISO 140-16:2006
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 16: Laboratory measurement of the sound reduction index improvement by additional lining 90.20 TC 43/SC 2
ISO 140-18:2006
Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 18: Laboratory measurement of sound generated by rainfall on building elements 60.60 TC 43/SC 2
ISO 354:2003
Acoustics -- Measurement of sound absorption in a reverberation room 90.92 TC 43/SC 2
ISO/NP 717-1
Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation 10.99 TC 43/SC 2
ISO 717-1:1996
Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation 90.92 TC 43/SC 2
ISO 717-1:1996/Amd 1:2006
Rounding rules related to single number ratings and single number quantities 90.92 TC 43/SC 2
ISO 717-2:1996
Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation 90.92 TC 43/SC 2
ISO/NP 717-2
Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation 10.99 TC 43/SC 2
ISO 717-2:1996/Amd 1:2006
. 90.92 TC 43/SC 2
ISO 3382-1:2009
Acoustics -- Measurement of room acoustic parameters -- Part 1: Performance spaces 60.60 TC 43/SC 2
ISO 3382-2:2008
Acoustics -- Measurement of room acoustic parameters -- Part 2: Reverberation time in ordinary rooms 60.60 TC 43/SC 2
ISO 3382-2:2008/Cor 1:2009
60.60 TC 43/SC 2
ISO/CD 3382-3
Acoustics -- Measurement of room acoustic parameters -- Part 3: Open plan spaces 30.60 TC 43/SC 2
ISO 6242-3:1992
Building construction -- Expression of users' requirements -- Part 3: Acoustical requirements 90.93 TC 59/SC 3
ISO 7235:2003
Acoustics -- Laboratory measurement procedures for ducted silencers and air-terminal units -- Insertion loss, flow noise and total pressure loss 90.93 TC 43/SC 1
ISO 9052-1:1989
Acoustics -- Determination of dynamic stiffness -- Part 1: Materials used under floating floors in dwellings 90.93 TC 43/SC 2
ISO 10052:2004
Acoustics -- Field measurements of airborne and impact sound insulation and of service equipment sound -- Survey method 90.93 TC 43/SC 2
ISO 10052:2004/DAmd 1
40.99 TC 43/SC 2
ISO 10053:1991
Acoustics -- Measurement of office screen sound attenuation under specific laboratory conditions 90.93 TC 43/SC 2
ISO/DIS 10140-1
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 1: Test codes 40.60 TC 43/SC 2
ISO 10140-1/NP Amd 1
Guideline for the determination of the sound reduction index of joints filled with fillers and or seals 10.99 TC 43/SC 2
ISO/DIS 10140-2
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 2: Measurement of airborne sound insulation 40.60 TC 43/SC 2
ISO/DIS 10140-3
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 3: Measurement of impact sound insulation 40.60 TC 43/SC 2
ISO/DIS 10140-4
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements 40.60 TC 43/SC 2
ISO/DIS 10140-5
Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 5: Requirements for test facilities and equipment 40.60 TC 43/SC 2
ISO 10848-1:2006
Acoustics -- Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms -- Part 1: Frame document 90.60 TC 43/SC 2
ISO 10848-2:2006
Acoustics -- Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms -- Part 2: Application to light elements when the junction has a small influence 90.60 TC 43/SC 2
ISO 10848-2:2006/Cor 1:2007
60.60 TC 43/SC 2
ISO 10848-3:2006
Acoustics -- Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms -- Part 3: Application to light elements when the junction has a substantial influence 90.60 TC 43/SC 2
ISO/DIS 10848-4
Acoustics -- Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms -- Part 4: All other cases 40.60 TC 43/SC 2
ISO 11654:1997
Acoustics -- Sound absorbers for use in buildings -- Rating of sound absorption 90.93 TC 43/SC 2
ISO 11691:1995
Acoustics -- Measurement of insertion loss of ducted silencers without flow -- Laboratory survey method 90.93 TC 43/SC 1
ISO 11820:1996
Acoustics -- Measurements on silencers in situ 90.93 TC 43/SC 1
ISO 15186-1:2000
Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 1: Laboratory measurements 90.93 TC 43/SC 2
ISO 15186-2:2003
Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 2: Field measurements 90.93 TC 43/SC 2
ISO 15186-3:2002
Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 3: Laboratory measurements at low frequencies 90.93 TC 43/SC 2
ISO 15665:2003
Acoustics -- Acoustic insulation for pipes, valves and flanges 90.93 TC 43/SC 1
ISO 15665:2003/Cor 1:2004
60.60 TC 43/SC 1
ISO 15712-1:2005
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 1: Airborne sound insulation between rooms 90.93 TC 43/SC 2
ISO 15712-2:2005
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 2: Impact sound insulation between rooms 90.93 TC 43/SC 2
ISO 15712-3:2005
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 3: Airborne sound insulation against outdoor sound 90.93 TC 43/SC 2
ISO 15712-4:2005
Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 4: Transmission of indoor sound to the outside 90.93 TC 43/SC 2
ISO 16032:2004
Acoustics -- Measurement of sound pressure level from service equipment in buildings -- Engineering method 90.93 TC 43/SC 2
ISO 17497-1:2004
Acoustics -- Sound-scattering properties of surfaces -- Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room 90.93 TC 43/SC 2
ISO 18233:2006
Acoustics -- Application of new measurement methods in building and room acoustics 90.20 TC 43/SC 2

91.120.25 Seismic and vibration protection
Vibrations and vibration measurements, see 17.160
Standard and/or project TC
ISO 3010:2001
Basis for design of structures -- Seismic actions on structures 90.93 TC 98/SC 3
ISO 4866:1990
Mechanical vibration and shock -- Vibration of buildings -- Guidelines for the measurement of vibrations and evaluation of their effects on buildings 90.92 TC 108/SC 2
ISO/DIS 4866
Mechanical vibration and shock -- Vibration of fixed structures -- Guidelines for the measurement of vibrations and evaluation of their effects on structures 40.99 TC 108/SC 2
ISO 4866:1990/Amd 1:1994
90.92 TC 108/SC 2
ISO 4866:1990/Amd 2:1996
90.92 TC 108/SC 2
ISO 10137:2007
Bases for design of structures - Serviceability of buildings and walkways against vibrations 60.60 TC 98/SC 2
ISO/TS 10811-1:2000
Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 1: Measurement and evaluation 90.93 TC 108/SC 2
ISO/TS 10811-2:2000
Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 2: Classification 90.93 TC 108/SC 2
ISO/NP 13033
Seismic actions on nonstructural components for building applications 10.99 TC 98/SC 3
ISO 16587:2004
Mechanical vibration and shock -- Performance parameters for condition monitoring of structures 90.93 TC 108
ISO 22762-3:2005
Elastomeric seismic-protection isolators -- Part 3: Applications for buildings -- Specifications 90.92 TC 45/SC 4
ISO/DIS 22762-3
Elastomeric seismic-protection isolators -- Part 3: Applications for buildings -- Specifications 40.20 TC 45/SC 4
ISO 22762-3:2005/Cor 1:2006
60.60 TC 45/SC 4
ISO 24314:2006
Structural steels -- Structural steels for building with improved seismic resistance -- Technical delivery conditions 60.60 TC 17/SC 3

91.120.30 Waterproofing
Sealing materials, see 91.100.50
91.120.40 Lightning protection
91.120.99 Other standards related to protection of and in buildings

91.140 Installations in buildings
Burners and boilers for industrial purposes, see 27.060
Heat pumps, see 27.080
ICS Field
91.140.01 Installations in buildings in general
Standard and/or project TC
ISO 10052:2004
Acoustics -- Field measurements of airborne and impact sound insulation and of service equipment sound -- Survey method 90.93 TC 43/SC 2
ISO 10052:2004/DAmd 1
40.99 TC 43/SC 2
ISO 10295-1:2007
Fire tests for building elements and components -- Fire testing of service installations -- Part 1: Penetration seals 60.60 TC 92/SC 2
ISO 10295-2:2009
Fire tests for building elements and components -- Fire testing of service installations -- Part 2: Linear joint (gap) seals 60.60 TC 92/SC 2
ISO 10295-2:2009/Cor 1:2009
60.60 TC 92/SC 2
ISO/CD TR 10295-3
Fire tests for building elements and components -- Fire testing of service installations -- Part 3: Guidance on the use of test configuration to establish direct and extended fields of application -- Single component penetration seals 30.60 TC 92/SC 2
ISO 12241:2008
Thermal insulation for building equipment and industrial installations -- Calculation rules 60.60 TC 163/SC 2
ISO 14617-15:2002
Graphical symbols for diagrams -- Part 15: Installation diagrams and network maps 90.60 TC 10/SC 10
ISO 15758:2004
Hygrothermal performance of building equipment and industrial installations -- Calculation of water vapour diffusion -- Cold pipe insulation systems 90.92 TC 163/SC 2
ISO 16032:2004
Acoustics -- Measurement of sound pressure level from service equipment in buildings -- Engineering method 90.93 TC 43/SC 2

91.140.10 Central heating systems
Including burners and boilers for central heating systems
Heating appliances, see 97.100
91.140.30 Ventilation and air-conditioning systems
Including ventilation ducts
Ventilators and air-conditioners, see 23.120
Standard and/or project TC
ISO 3258:1976
Air distribution and air diffusion -- Vocabulary 95.20 TC 144
ISO 3649:1980
Cleaning equipment for air or other gases -- Vocabulary 90.92 TC 142
ISO 5219:1984
Air distribution and air diffusion -- Laboratory aerodynamic testing and rating of air terminal devices 95.20 TC 144/SC 1
ISO 5220:1981
Air distribution and air diffusion -- Aerodynamic testing and rating of constant and variable dual or single duct boxes and single duct units 95.20 TC 144/SC 2
ISO 5220:1981/Add 1:1984
Variable primary flow rate control devices with induced flow facility 60.60 TC 144/SC 2
ISO 5221:1984
Air distribution and air diffusion -- Rules to methods of measuring air flow rate in an air handling duct 90.99 TC 144/SC 3
ISO 6242-2:1992
Building construction -- Expression of users' requirements -- Part 2: Air purity requirements 90.93 TC 59/SC 3
ISO 6584:1981
Cleaning equipment for air and other gases -- Classification of dust separators 90.93 TC 142
ISO 6944-1:2008
Fire containment -- Elements of building construction -- Part 1: Ventilation ducts 60.60 TC 92/SC 2
ISO 6944-2:2009
Fire containment -- Elements of building construction -- Part 2: Kitchen extract ducts 60.60 TC 92/SC 2
ISO 7244:1984
Air distribution and air diffusion -- Aerodynamic testing of dampers and valves 95.20 TC 144/SC 2
ISO 7807:1983
Air distribution -- Straight circular sheet metal ducts with a lock type spiral seam and straight rectangular sheet metal ducts -- Dimensions 95.20 TC 144
ISO/NP 10121-1
Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation -- Part 1: Gas-phase air cleaning media 10.99 TC 142
ISO/NP 10121-2
Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation -- Part 2: Gas-phase air cleaning devices 10.99 TC 142
ISO 10294-1:1996
Fire resistance tests -- Fire dampers for air distribution systems -- Part 1: Test method 90.93 TC 92/SC 2
ISO 10294-2:1999
Fire resistance tests -- Fire dampers for air distribution systems -- Part 2: Classification, criteria and field of application of test results 90.93 TC 92/SC 2
ISO 10294-3:1999
Fire resistance tests -- Fire dampers for air distribution systems -- Part 3: Guidance on the test method 90.93 TC 92/SC 2
ISO 10294-4:2001
Fire resistance tests -- Fire dampers for air distribution systems -- Part 4: Test of thermal release mechanism 90.93 TC 92/SC 2
ISO 10294-5:2005
Fire resistance tests -- Fire dampers for air distribution systems -- Part 5: Intumescent fire dampers 90.93 TC 92/SC 2
ISO/NP 29462
Field testing of general ventilation filtration devices and systems for in-situ removal efficiency by particle size and resistance to airflow 10.99 TC 142
ISO/CD 29463-1
Performance testing and classification of high efficiency filters and filter media for removing particles in air -- Part 1: Classification, performance, testing and marking 30.60 TC 142
ISO/CD 29463-2
Performance testing and classification of high efficiency filters and filter media for removing particles in air -- Part 2: Aerosol production, measuring equipment, particle counting statistics 30.60 TC 142
ISO/CD 29463-3
Performance testing and classification of high efficiency filters and filter media for removing particles in air -- Part 3: Testing flat sheet filter media 30.60 TC 142
ISO/CD 29463-4
Performance testing and classification of high efficiency filters and filter media for removing particles in air -- Part 4: Determining leakage of filter elements (Scan mthod) 30.60 TC 142
ISO/CD 29463-5
Performance testing and classification of high efficiency filters and filter media for removing particles in air -- Part 5: Determining the efficiency of filter elements 30.60 TC 142
ISO/CD 29464
Cleaning equipment for air and other gases -- Terminology 30.60 TC 142

91.140.40 Gas supply systems
Including gas meters in buildings
Standard and/or project TC
ISO 2531:1998
Ductile iron pipes, fittings, accessories and their joints for water or gas applications 90.92 TC 5/SC 2
ISO/FDIS 2531
Ductile iron pipes, fittings, accessories and their joints for water applications 50.00 TC 5/SC 2
ISO 6447:1983
Rubber seals -- Joint rings used for gas supply pipes and fittings -- Specification for material 90.93 TC 45/SC 4
ISO 17484-1:2006
Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems 90.20 TC 138/SC 4
ISO 17484-1:2006/Cor 1:2008
60.60 TC 138/SC 4
ISO 17484-2:2009
Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice 60.60 TC 138/SC 4
ISO/TR 19480:2005
Polyethylene pipes and fittings for the supply of gaseous fuels or water -- Training and assessment of fusion operators 90.20 TC 138/SC 4

91.140.50 Electricity supply systems
Including electric energy meters in buildings, emergency electrical supplies, etc.
91.140.60 Water supply systems
Including water meters in buildings
External water conveyance systems, see 93.025
Standard and/or project TC
ISO 559:1991
Steel tubes for water and sewage 90.93 TC 5/SC 1
ISO/FDIS 1452-1
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General 50.00 TC 138/SC 2
ISO/FDIS 1452-2
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes 50.00 TC 138/SC 2
ISO/FDIS 1452-3
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings 50.00 TC 138/SC 2
ISO/FDIS 1452-4
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves 50.00 TC 138/SC 2
ISO/FDIS 1452-5
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system 50.00 TC 138/SC 2
ISO 2531:1998
Ductile iron pipes, fittings, accessories and their joints for water or gas applications 90.92 TC 5/SC 2
ISO/FDIS 2531
Ductile iron pipes, fittings, accessories and their joints for water applications 50.00 TC 5/SC 2
ISO 3114:1977
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method 90.93 TC 138/SC 5
ISO 3822-1:1999
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 1: Method of measurement 90.93 TC 43/SC 2
ISO 3822-1:1999/Amd 1:2008
Measurement uncertainty 60.60 TC 43/SC 2
ISO 3822-2:1995
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves 90.93 TC 43/SC 2
ISO 3822-3:1997
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances 90.93 TC 43/SC 2
ISO 3822-3:1997/FDAmd 1
50.00 TC 43/SC 2
ISO 3822-4:1997
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 4: Mounting and operating conditions for special appliances 90.93 TC 43/SC 2
ISO 4064-1:2005
Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 1: Specifications 90.60 TC 30/SC 7
ISO 4064-2:2005
Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 2: Installation requirements 90.60 TC 30/SC 7
ISO 4064-3:2005
Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 3: Test methods and equipment 90.60 TC 30/SC 7
ISO/TR 4191:1989
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying 90.92 TC 138/SC 2
ISO 4422-1:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 1: General 90.92 TC 138/SC 2
ISO 4422-2:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 2: Pipes (with or without integral sockets) 90.92 TC 138/SC 2
ISO 4422-3:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 3: Fittings and joints 90.92 TC 138/SC 2
ISO 4422-4:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 4: Valves and ancillary equipment 90.92 TC 138/SC 2
ISO 4422-5:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 5: Fitness for purpose of the system 90.92 TC 138/SC 2
ISO 4427-1:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General 60.60 TC 138/SC 2
ISO 4427-1:2007/Cor 1:2008
60.60 TC 138/SC 2
ISO 4427-2:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes 60.60 TC 138/SC 2
ISO 4427-3:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings 60.60 TC 138/SC 2
ISO 4427-5:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system 60.60 TC 138/SC 2
ISO 4633:2002
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials 90.93 TC 45/SC 4
ISO 7259:1988
Predominantly key-operated cast iron gate valves for underground use 90.60 TC 153/SC 1
ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints 90.93 TC 138/SC 5
ISO 10508:2006
Plastics piping systems for hot and cold water installations -- Guidance for classification and design 90.93 TC 138/SC 2
ISO 10639:2004
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin 90.93 TC 138/SC 6
ISO 10639:2004/DAmd 1
40.99 TC 138/SC 6
ISO/CD 13056
Plastics piping systems -- Pressure systems for hot and cold water -- Test method for leaktightness under vacuum 30.60 TC 138/SC 5
ISO 13844:2000
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure 90.93 TC 138/SC 2
ISO 13845:2000
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection 90.93 TC 138/SC 2
ISO 14236:2000
Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems 90.93 TC 138/SC 2
ISO/NP 15874-1
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General 10.99 TC 138/SC 2
ISO 15874-1:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General 90.92 TC 138/SC 2
ISO 15874-1:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15874-2:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes 90.92 TC 138/SC 2
ISO/NP 15874-2
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes 10.99 TC 138/SC 2
ISO 15874-2:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15874-3:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings 90.92 TC 138/SC 2
ISO/NP 15874-3
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings 10.99 TC 138/SC 2
ISO 15874-5:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system 90.92 TC 138/SC 2
ISO/NP 15874-5
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system 10.99 TC 138/SC 2
ISO/TS 15874-7:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 7: Guidance for the assessment of conformity 90.60 TC 138/SC 2
ISO 15875-1:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 1: General 90.93 TC 138/SC 2
ISO 15875-1:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15875-2:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 2: Pipes 90.93 TC 138/SC 2
ISO 15875-2:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15875-3:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 3: Fittings 90.93 TC 138/SC 2
ISO 15875-5:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 5: Fitness for purpose of the system 90.93 TC 138/SC 2
ISO 15875-5:2003/Cor 1:2007
60.60 TC 138/SC 2
ISO/TS 15875-7:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity 90.93 TC 138/SC 2
ISO 15876-1:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 1: General 90.93 TC 138/SC 2
ISO 15876-1:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15876-2:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 2: Pipes 90.93 TC 138/SC 2
ISO 15876-2:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15876-3:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 3: Fittings 90.93 TC 138/SC 2
ISO 15876-5:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 5: Fitness for purpose of the system 90.93 TC 138/SC 2
ISO/TS 15876-7:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 7: Guidance for the assessment of conformity 90.93 TC 138/SC 2
ISO 15877-1:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General 60.60 TC 138/SC 2
ISO 15877-1:2009/DAmd 1
40.20 TC 138/SC 2
ISO 15877-2:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes 60.60 TC 138/SC 2
ISO 15877-2:2009/DAmd 1
40.20 TC 138/SC 2
ISO 15877-3:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings 60.60 TC 138/SC 2
ISO 15877-3:2009/DAmd 1
40.20 TC 138/SC 2
ISO 15877-5:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system 60.60 TC 138/SC 2
ISO 15877-5:2009/DAmd 1
40.20 TC 138/SC 2
ISO/TS 15877-7:2003
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity 90.92 TC 138/SC 2
ISO/PRF TS 15877-7
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity 50.20 TC 138/SC 2
ISO 16422:2006
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications 90.20 TC 138/SC 2
ISO 21003-1:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 1: General 60.60 TC 138/SC 2
ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 2: Pipes 60.60 TC 138/SC 2
ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 3: Fittings 60.60 TC 138/SC 2
ISO 21003-5:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 5: Fitness for purpose of the system 60.60 TC 138/SC 2
ISO/TS 21003-7:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity 60.60 TC 138/SC 2
ISO/DIS 22158
Input/output protocols and electronic interfaces for water meters -- Requirements 40.99 TC 30/SC 7
ISO/FDIS 22391-1
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General 50.00 TC 138/SC 2
ISO 22391-1:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General 90.92 TC 138/SC 2
ISO 22391-2:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes 90.92 TC 138/SC 2
ISO/FDIS 22391-2
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes 50.00 TC 138/SC 2
ISO 22391-3:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings 90.92 TC 138/SC 2
ISO/FDIS 22391-3
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings 50.00 TC 138/SC 2
ISO 22391-5:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system 90.92 TC 138/SC 2
ISO/FDIS 22391-5
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system 50.00 TC 138/SC 2
ISO 23711:2003
Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers 90.93 TC 45/SC 4
ISO/DIS 25780.2
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques 40.20 TC 138/SC 6

91.140.65 Water heating equipment
91.140.70 Sanitary installations
Including bidets, kitchen sinks, baths, waste chutes, etc.
91.140.80 Drainage systems
Drainage systems for rainwater, see 91.060.20
External sewage systems, see 93.030
Sewage water disposal and treatment, see 13.060.30
Standard and/or project TC
ISO 265-1:1988
Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) 90.93 TC 138/SC 1
ISO 559:1991
Steel tubes for water and sewage 90.93 TC 5/SC 1
ISO 3633:2002
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Unplasticized poly(vinyl chloride) (PVC-U) 90.93 TC 138/SC 1
ISO 4633:2002
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials 90.93 TC 45/SC 4
ISO 6594:2006
Cast iron drainage pipes and fittings -- Spigot series 90.93 TC 5/SC 2
ISO/TS 7024:2005
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Thermoplastics -- Recommended practice for installation 90.60 TC 138/SC 1
ISO/TR 7073:1988
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers 90.60 TC 138/SC 1
ISO/TR 7074:1986
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage 90.93 TC 138/SC 1
ISO 7671:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polypropylene (PP) 90.93 TC 138/SC 1
ISO 7675:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Chlorinated poly(vinyl chloride) (PVC-C) 90.60 TC 138/SC 1
ISO 7682:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Acrylonitrile-butadiene-styrene (ABS) 90.93 TC 138/SC 1
ISO 8283-1:1991
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) 90.93 TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE) 90.93 TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP) 90.93 TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS) 90.93 TC 138/SC 1
ISO 8770:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polyethylene (PE) 90.93 TC 138/SC 1
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE) 90.20 TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP) 90.20 TC 138/SC 1
ISO 9896:1996
Plastics traps for discharge pipework systems inside buildings 90.93 TC 138/SC 1
ISO 10467:2004
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin 90.93 TC 138/SC 6
ISO 10467:2004/DAmd 1
40.99 TC 138/SC 6
ISO/FDIS 11296-1
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General 50.00 TC 138
ISO/FDIS 11296-3
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes 50.00 TC 138
ISO/FDIS 11296-4
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes 50.00 TC 138
ISO/NP 11296-7
Plastics pipes and fittings -- Plastics pipes and their constituents (all relevant materials) for renovation of underground non-pressure drainage and sewer networks and house connections -- Part 7: Lining with spirally wound unplasticized poly(viny chloride) (PVC-U) pipes 10.99 TC 138
ISO/DIS 13229
Thermoplastics piping systems for non-pressure applications -- Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings -- Determination of the viscosity number and K-value 40.20 TC 138/SC 1
ISO/DIS 13254
Thermoplastics piping systems for non-pressure applications -- Test method for watertightness 40.20 TC 138/SC 1
ISO/DIS 13255
Thermoplastics piping systems for soil and waste discharge inside buildings -- Test method for airtightness of joints 40.20 TC 138/SC 1
ISO/DIS 13257
Thermoplastics piping systems for non pressure applications -- Test method for resistance to elevated temperature cycling 40.20 TC 138/SC 1
ISO/DIS 13259
Thermoplastics piping systems for underground non-pressure applications -- Test method for leaktightness of elastomeric sealing ring type joints 40.20 TC 138/SC 1
ISO/DIS 13260
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading 40.20 TC 138/SC 1
ISO/DIS 13262
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam 40.20 TC 138/SC 1
ISO/DIS 13263
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength 40.20 TC 138/SC 1
ISO/DIS 13264
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings 40.20 TC 138/SC 1
ISO/DIS 13265
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure 40.20 TC 138/SC 1
ISO/DIS 13266
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading 40.20 TC 138/SC 1
ISO/DIS 13267
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test method for buckling resistance 40.20 TC 138/SC 1
ISO/DIS 13268
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness 40.20 TC 138/SC 1
ISO/DIS 13272
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations 40.60 TC 138/SC 1
ISO 18672-1:2009
Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints 60.60 TC 138/SC 6
ISO 19220:2004
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Styrene copolymer blends (SAN + PVC) 90.93 TC 138/SC 1
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system 60.60 TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A 60.60 TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B 60.60 TC 138/SC 1
ISO 22306:2007
Fibre-reinforced cement pipe, joints and fittings for gravity systems 60.60 TC 77
ISO 23711:2003
Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers 90.93 TC 45/SC 4
ISO/DIS 25780.2
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques 40.20 TC 138/SC 6

91.140.90 Lifts. Escalators
Standard and/or project TC
ISO 4101:1983
Drawn steel wire for elevator ropes -- Specifications 90.93 TC 105
ISO 4190-1:1999
Lift (US: Elevator) installation -- Part 1: Class I, II, III and VI lifts 90.92 TC 178
ISO/DIS 4190-1
Lift (Elevator) installation -- Part 1: Class I, II, III and VI lifts 40.60 TC 178
ISO 4190-2:2001
Lift (US: Elevator) installation -- Part 2: Class IV lifts 90.93 TC 178
ISO 4190-3:1982
Passenger lift installations -- Part 3: Service lifts class V 90.93 TC 178
ISO 4190-5:2006
Lift (Elevator) installation -- Part 5: Control devices, signals and additional fittings 60.60 TC 178
ISO 4190-6:1984
Lifts and service lifts (USA : elevators and dumbwaiters) -- Part 6: Passenger lifts to be installed in residential buildings -- Planning and selection 90.93 TC 178
ISO 4344:2004
Steel wire ropes for lifts -- Minimum requirements 90.93 TC 105
ISO 7465:2007
Passenger lifts and service lifts -- Guide rails for lift cars and counterweights -- T-type 60.60 TC 178
ISO 8383:1985
Lifts on ships -- Specific requirements 90.93 TC 178
ISO 9386-1:2000
Power-operated lifting platforms for persons with impaired mobility -- Rules for safety, dimensions and functional operation -- Part 1: Vertical lifting platforms 90.93 TC 178
ISO 9386-2:2000
Power-operated lifting platforms for persons with impaired mobility -- Rules for safety, dimensions and functional operation -- Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane 90.93 TC 178
ISO 9589:1994
Escalators -- Building dimensions 90.93 TC 178
ISO/TR 11071-1:2004
Comparison of worldwide lift safety standards -- Part 1: Electric lifts (elevators) 60.60 TC 178
ISO/TR 11071-2:2006
Comparison of worldwide lift safety standards -- Part 2: Hydraulic lifts (elevators) 60.60 TC 178
ISO/NP 13615
Escalators and moving walks - Design and development of programmable electronic systems in safety related application (PESSRAE) 10.99 TC 178
ISO/NP 13619
Lifts (elevators), escalators and moving walks - Maintenance, repair and retrofit activities of programmable electronic systems in safety related applications 10.99 TC 178
ISO 14798:2009
Lifts (elevators), escalators and moving walks -- Risk assessment and reduction methodology 60.60 TC 178
ISO/TR 14799-1:2005
Comparison of worldwide escalator and moving walk safety standards -- Part 1: Rule by rule comparison 60.60 TC 178
ISO/TR 14799-2:2005
Comparison of worldwide escalator and moving walk safety standards -- Part 2: Abbreviated comparison and comments 90.92 TC 178
ISO/NP TR 14799-2
Comparison of worldwide escalator and moving walk safety standards -- Part 2: Abbreviated comparison and comments 10.99 TC 178
ISO/TR 16764:2003
Lifts, escalators and passenger conveyors -- Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility 60.60 TC 178
ISO/TR 16765:2003
Comparison of worldwide safety standards on lifts for firefighters 90.60 TC 178
ISO/TR 16765:2003/Cor 1:2003
60.60 TC 178
ISO 18738:2003
Lifts (elevators) - Measurement of lift ride quality 90.92 TC 178
ISO/NP 18738-1
Measurement of lift ride quality -- Part 1: Lifts (elevators) 10.99 TC 178
ISO 22199:2006
Electromagnetic compatibility -- Product family standard for lifts, escalators and moving walks -- Emission 90.92 TC 178
ISO/DIS 22199
Electromagnetic compatibility -- Product family standard for lifts, escalators and moving walks -- Emission 40.60 TC 178
ISO 22200:2009
Electromagnetic compatibility -- Product family standard for lifts, escalators and moving walks -- Immunity 60.60 TC 178
ISO 22201:2009
Lifts (elevators) -- Design and development of programmable electronic systems in safety-related applications for lifts (PESSRAL) 60.60 TC 178
ISO/TS 22559-1:2004
Safety requirements for lifts (elevators) -- Part 1: Global essential safety requirements (GESRs) 90.92 TC 178
ISO/CD TS 22559-2
Safety requirements for lifts -- Part 2: Safety parameters meeting the GESRs 30.99 TC 178
ISO/NP TS 22559-3
Safety requirements for lifts (elevators) -- Part 3: Global conformity assessment procedures (GCAP) - General requirements 10.99 TC 178
ISO/NP TS 22559-4
Safety requirements for lifts (elevators) -- Part 4: Global conformity assessment procedures (GCAP) -- Certification and Accreditation requirements 10.99 TC 178
ISO/CD TS 25740-1
Safety requirements for escalators and moving walks -- Part 1: Global essential safety requirements (GESR) 30.60 TC 178
ISO/TR 25741:2008
Lifts and escalators subject to seismic conditions -- Compilation report 60.60 TC 178
ISO/CD TR 25742
Lifts (elevators) -- Study of the methods used for fire testing lift landing doors 30.60 TC 178
ISO/CD TR 25743
Lifts (elevators) -- Study into the use of lifts for evacuation during an emergency 30.60 TC 178
ISO/CD 25744
Escalators and moving walkways -- Measurement of ride quality 30.60 TC 178
ISO/DIS 25745-1
Energy performance of lifts and escalators -- Part 1: Energy measurement and conformance 40.60 TC 178

91.140.99 Other installations in buildings

91.160 Lighting
Including oil and gas lamps
Theatre, stage and studio lighting equipment, see 97.200.10
91.160.01 Lighting in general
91.160.10 Interior lighting
Including workplace lighting, emergency and safety lighting
Standard and/or project TC
ISO/CIE 8995-1:2002/Cor 1:2005
60.60 CIE
ISO/CIE 8995-1:2002
Lighting of work places -- Part 1: Indoor 90.60 CIE
ISO/FDIS 8995-2
Lighting of work places -- Part 2: Outdoor 50.92 CIE
ISO/CIE 8995-3:2006
Lighting of work places -- Part 3: Lighting requirements for safety and security of outdoor work places 60.60 CIE
ISO 30061:2007
Emergency lighting 60.60 CIE

91.160.20 Exterior building lighting
Including flood lighting
Street lighting and related equipment, see 93.080.40

91.180 Interior finishing
Paint coating processes, see 87.020
91.190 Building accessories
Including locks, buzzers, bells, bolts, door and window hardware, etc.
91.200 Construction technology
Including measuring methods, construction sites, demolition of structures, etc.
Standard and/or project TC
ISO 3443-1:1979
Tolerances for building -- Part 1: Basic principles for evaluation and specification 90.20 TC 59
ISO 3443-2:1979
Tolerances for building -- Part 2: Statistical basis for predicting fit between components having a normal distribution of sizes 90.60 TC 59
ISO 3443-3:1987
Tolerances for building -- Part 3: Procedures for selecting target size and predicting fit 90.93 TC 59
ISO 3443-4:1986
Tolerances for building -- Part 4: Method for predicting deviations of assemblies and for allocation of tolerances 90.93 TC 59
ISO 3443-5:1982
Building construction -- Tolerances for building -- Part 5: Series of values to be used for specification of tolerances 90.93 TC 59
ISO 3443-6:1986
Tolerances for building -- Part 6: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control -- Method 1 90.93 TC 59
ISO 3443-7:1988
Tolerances for building -- Part 7: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control -- Method 2 (Statistical control method) 90.93 TC 59
ISO 3443-8:1989
Tolerances for building -- Part 8: Dimensional inspection and control of construction work 90.93 TC 59
ISO 4463-1:1989
Measurement methods for building -- Setting-out and measurement -- Part 1: Planning and organization, measuring procedures, acceptance criteria 90.60 TC 59
ISO 4463-2:1995
Measurement methods for building -- Setting-out and measurement -- Part 2: Measuring stations and targets 90.93 TC 59
ISO 4463-3:1995
Measurement methods for building -- Setting-out and measurement -- Part 3: Check-lists for the procurement of surveys and measurement services 90.93 TC 59
ISO 7077:1981
Measuring methods for building -- General principles and procedures for the verification of dimensional compliance 90.93 TC 59
ISO 7078:1985
Building construction -- Procedures for setting out, measurement and surveying -- Vocabulary and guidance notes 90.60 TC 59
ISO 7727:1984
Joints in building -- Principles for jointing of building components -- Accommodation of dimensional deviations during construction 90.60 TC 59
ISO 7976-1:1989
Tolerances for building -- Methods of measurement of buildings and building products -- Part 1: Methods and instruments 90.60 TC 59
ISO 7976-2:1989
Tolerances for building -- Methods of measurement of buildings and building products -- Part 2: Position of measuring points 90.60 TC 59
ISO 12491:1997
Statistical methods for quality control of building materials and components 90.93 TC 98/SC 2

91.220 Construction equipment
Including scaffolding, mixers for concrete and mortar, etc.
Earth-moving machinery, see 53.100
Lifting equipment, see 53.020
Standard and/or project TC
ISO 4872:1978
Acoustics -- Measurement of airborne noise emitted by construction equipment intended for outdoor use -- Method for determining compliance with noise limits 90.93 TC 43/SC 1
ISO 11375:1998
Building construction machinery and equipment -- Terms and definitions 90.60 TC 195
ISO 11886:2002
Building construction machinery and equipment -- Pile driving and extracting equipment -- Terminology and commercial specifications 90.93 TC 195
ISO 11886:2002/Cor 1:2006
60.60 TC 195
ISO/TR 12603:1996
Building construction machinery and equipment -- Classification 90.92 TC 195
ISO/CD 12603
Building construction machinery and equipment -- Classification 30.99 TC 195
ISO/NP 13027
Building construction machinery and equipment - Concrete batching plant - Safety requirements 10.99 TC 195/SC 1
ISO/CD 13442
Tyres and rims for construction machines 30.60 TC 31/SC 6
ISO 13442:2004
Tyres and rims for construction machines 90.92 TC 31/SC 6
ISO 18650-1:2004
Building construction machinery and equipment -- Concrete mixers -- Part 1: Vocabulary and general specifications 90.60 TC 195/SC 1
ISO 18650-2:2006
Building construction machinery and equipment -- Concrete mixers -- Part 2: Procedure for examination of mixing efficiency 90.20 TC 195/SC 1
ISO/CD 18651-1
Building construction machinery and equipment -- Internal vibrators for concrete -- Part 1: Terminology and commercial specifications 30.99 TC 195/SC 1
ISO 18652:2005
Building construction machinery and equipment -- External vibrators for concrete 90.60 TC 195/SC 1
ISO 19432:2006
Building construction machinery and equipment -- Portable, hand-held, internal combustion engine driven cut-off machines -- Safety requirements and testing 90.92 TC 195
ISO/CD 19432
Building construction machinery and equipment -- Portable, hand-held, internal combustion engine driven cut-off machines -- Safety requirements and testing 30.60 TC 195
ISO 19433:2008
Building construction machinery and equipment -- Pedestrian-controlled vibratory plates -- Terminology and commercial specifications 60.60 TC 195
ISO 19452:2008
Building construction machinery and equipment -- Pedestrian-controlled vibratory (percussion) rammers -- Terminology and commercial specifications 60.60 TC 195
ISO 19452:2008/Cor 1:2008
60.60 TC 195
ISO 21573-1:2006
Building construction machinery and equipment -- Concrete pumps -- Part 1: Terminology and commercial specifications 90.20 TC 195/SC 1
ISO 21573-2:2008
Building construction machinery and equipment -- Concrete pumps -- Part 2: Procedure for examination of technical parameters 60.60 TC 195/SC 1
ISO 21592:2006
Building construction machinery and equipment -- Concrete spraying machines -- Terminology and commercial specifications 90.20 TC 195/SC 1
ISO 21873-1:2008
Building construction machinery and equipment -- Mobile crushers -- Part 1: Terminology and commercial specifications 60.60 TC 195
ISO/PRF 21873-2
Building construction machinery and equipment -- Mobile crushers -- Part 2: Safety requirements 50.00 TC 195



http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.