Wednesday, July 22, 2009

Lastest & Cheapest ISO Standards In PDF (57)

http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.

ISO 17710:2002
Plastics -- Polyols for use in the production of polyurethane -- Determination of degree of unsaturation by microtitration 90.93 TC 61/SC 12
ISO/DIS 18280
Plastics -- Epoxy resins -- Test methods 40.20 TC 61/SC 12
ISO 18280:2005
Plastics -- Epoxy resins -- Test methods 90.92 TC 61/SC 12
ISO 18872:2007
Plastics -- Determination of tensile properties at high strain rates 60.60 TC 61/SC 2
ISO 21048:2004
Plastics -- Epoxy resins -- Determination of 1,2-glycol content 90.93 TC 61/SC 12
ISO 21318:2007
Plastics -- Epoxy resins -- Determination of electrical conductivity of aqueous resin extracts 60.60 TC 61/SC 12
ISO 21627-1:2002
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 1: Inorganic chlorine 90.92 TC 61/SC 12
ISO/FDIS 21627-1
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 1: Inorganic chlorine 50.20 TC 61/SC 12
ISO 21627-2:2002
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 2: Easily saponifiable chlorine 90.92 TC 61/SC 12
ISO/FDIS 21627-2
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 2: Easily saponifiable chlorine 50.20 TC 61/SC 12
ISO/FDIS 21627-3
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 3: Total chlorine 50.20 TC 61/SC 12
ISO 21627-3:2002
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 3: Total chlorine 90.92 TC 61/SC 12
ISO 25761:2008
Plastics -- Polyols for use in the production of polyurethanes -- Determination of basicity (total amine value), expressed as percent nitrogen 60.60 TC 61/SC 12
ISO 26603:2008
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of total chlorine 60.60 TC 61/SC 12

83.080.20 Thermoplastic materials
Standard and/or project TC
ISO/DIS 182-1
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 1: Congo red method 40.99 TC 61/SC 9
ISO 182-1:1990
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 1: Congo red method 90.92 TC 61/SC 9
ISO/DIS 182-2
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 2: pH method 40.99 TC 61/SC 9
ISO 182-2:1990
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 2: pH method 90.92 TC 61/SC 9
ISO 182-3:1993
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 3: Conductometric method 90.60 TC 61/SC 9
ISO 182-4:1993
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 4: Potentiometric method 90.60 TC 61/SC 9
ISO/DIS 293
Plastics -- Compression moulding of test specimens of thermoplastic materials 40.99 TC 61/SC 9
ISO 293:2004
Plastics -- Compression moulding of test specimens of thermoplastic materials 90.92 TC 61/SC 9
ISO 294-1:1996
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens 90.92 TC 61/SC 9
ISO/CD 294-1
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens 30.99 TC 61/SC 9
ISO 294-1:1996/Amd 1:2001
60.60 TC 61/SC 9
ISO 294-1:1996/Amd 2:2005
Methods of determining the hold pressure and hold time 60.60 TC 61/SC 9
ISO 294-2:1996
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars 90.92 TC 61/SC 9
ISO/CD 294-2
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars 30.99 TC 61/SC 9
ISO 294-2:1996/Amd 1:2004
60.60 TC 61/SC 9
ISO 294-3:2002
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates 90.92 TC 61/SC 9
ISO/DIS 294-3
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates 40.99 TC 61/SC 9
ISO 294-3:2002/Amd 1:2006
60.60 TC 61/SC 9
ISO 294-4:2001
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage 90.92 TC 61/SC 9
ISO/DIS 294-4
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage 40.99 TC 61/SC 9
ISO 294-4:2001/Cor 1:2007
60.60 TC 61/SC 9
ISO 294-5:2001
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy 90.92 TC 61/SC 9
ISO/DIS 294-5
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy 40.99 TC 61/SC 9
ISO 294-5:2001/Amd 1:2004
60.60 TC 61/SC 9
ISO 294-5:2001/Cor 1:2003
60.60 TC 61/SC 9
ISO 305:1990
Plastics -- Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds -- Discoloration method 90.93 TC 61/SC 9
ISO 306:2004
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST) 90.93 TC 61/SC 2
ISO 307:2007
Plastics -- Polyamides -- Determination of viscosity number 60.60 TC 61/SC 9
ISO 458-2:1985
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride 90.93 TC 61/SC 2
ISO 585:1990
Plastics -- Unplasticized cellulose acetate -- Determination of moisture content 90.93 TC 61/SC 9
ISO 1060-1:1998
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO/CD 1060-2
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Preparation of test samples and determination of properties 30.99 TC 61/SC 9
ISO 1060-2:1998
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Preparation of test samples and determination of properties 90.92 TC 61/SC 9
ISO 1061:1990
Plastics -- Unplasticized cellulose acetate -- Determination of free acidity 90.93 TC 61/SC 9
ISO 1068:1975
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of compacted apparent bulk density 90.93 TC 61/SC 9
ISO 1110:1995
Plastics -- Polyamides -- Accelerated conditioning of test specimens 90.93 TC 61/SC 9
ISO 1133:2005
Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics 90.92 TC 61/SC 5
ISO 1133:2005/Cor 1:2006
60.60 TC 61/SC 5
ISO/DIS 1133-1
Plastics -- Determination of the melt volume-flow rate (MVR) and melt mass-flow rate (MFR) of thermoplastics materials -- Part 1: Standard method 40.20 TC 61/SC 5
ISO/DIS 1133-2
Plastics -- Determination of the melt volume-flow rate (MVR) and melt mass-flow rate (MFR) of thermoplastics materials -- Part 2: Method for materials sensitive to time-temperature history and/or moisture 40.20 TC 61/SC 5
ISO 1158:1998
Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content 90.93 TC 61/SC 9
ISO 1163-1:1995
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.92 TC 61/SC 9
ISO/DIS 1163-1
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 40.99 TC 61/SC 9
ISO 1163-2:1995
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.92 TC 61/SC 9
ISO/DIS 1163-2
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 40.99 TC 61/SC 9
ISO 1264:1980
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of pH of aqueous extract 90.93 TC 61/SC 9
ISO 1265:2007
Plastics -- Poly(vinyl chloride) resins -- Determination of number of impurities and foreign particles 60.60 TC 61/SC 9
ISO 1269:2006
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water) 90.60 TC 61/SC 9
ISO 1598:1990
Plastics - Cellulose acetate -- Determination of insoluble particles 90.93 TC 61/SC 9
ISO 1599:1990
Plastics -- Cellulose acetate -- Determination of viscosity loss on moulding 90.93 TC 61/SC 9
ISO 1600:1990
Plastics -- Cellulose acetate -- Determination of light absorption on moulded specimens produced using different periods of heating 90.93 TC 61/SC 9
ISO 1622-1:1994
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.60 TC 61/SC 9
ISO 1622-2:1995
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 9
ISO 1624:2001
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis in water 90.93 TC 61/SC 9
ISO 1628-2:1998
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 2: Poly(vinyl chloride) resins 90.93 TC 61/SC 9
ISO 1628-3:2001
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 3: Polyethylenes and polypropylenes 90.92 TC 61/SC 9
ISO/DIS 1628-3
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 3: Polyethylenes and polypropylenes 40.99 TC 61/SC 9
ISO 1628-4:1999
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials 90.60 TC 61/SC 9
ISO 1628-6:1990
Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers 90.93 TC 61/SC 9
ISO 1872-1:1993
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.60 TC 61/SC 9
ISO/CD 1872-2
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 30.99 TC 61/SC 9
ISO 1872-2:2007
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.92 TC 61/SC 9
ISO/DIS 1873-1
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 40.99 TC 61/SC 9
ISO 1873-1:1995
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.92 TC 61/SC 9
ISO 1873-2:2007
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 60.60 TC 61/SC 9
ISO 1874-1:1992
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation 90.92 TC 61/SC 9
ISO/DIS 1874-1
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation 40.60 TC 61/SC 9
ISO 1874-2:2006
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.60 TC 61/SC 9
ISO 1874-2:2006/DAmd 1
40.60 TC 61/SC 9
ISO 1875:1982
Plastics -- Plasticized cellulose acetate -- Determination of matter extractable by diethyl ether 90.93 TC 61/SC 9
ISO 2561:2006
Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography 90.60 TC 61/SC 9
ISO 2580-1:2002
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO 2580-2:2003
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.92 TC 61/SC 9
ISO/DIS 2580-2
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 40.99 TC 61/SC 9
ISO 2897-1:1997
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO 2897-2:2003
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 9
ISO 2898-1:1996
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO 2898-2:2008
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 60.60 TC 61/SC 9
ISO 3451-2:1998
Plastics -- Determination of ash -- Part 2: Poly(alkylene terephthalate) materials 90.93 TC 61/SC 5
ISO 3451-3:1984
Plastics -- Determination of ash -- Part 3: Unplasticized cellulose acetate 90.93 TC 61/SC 5
ISO 3451-4:1998
Plastics -- Determination of ash -- Part 4: Polyamides 90.93 TC 61/SC 5
ISO 3451-5:2002
Plastics -- Determination of ash -- Part 5: Poly(vinyl chloride) 90.93 TC 61/SC 5
ISO 4574:1978
Plastics -- PVC resins for general use -- Determination of hot plasticizer absorption 90.60 TC 61/SC 9
ISO 4575:2007
Plastics -- Poly(vinyl chloride) pastes -- Determination of apparent viscosity using the Severs rheometer 60.60 TC 61/SC 9
ISO 4577:1983
Plastics -- Polypropylene and propylene-copolymers -- Determination of thermal oxidative stability in air -- Oven method 90.93 TC 61/SC 9
ISO 4581:1994
Plastics -- Styrene/acrylonitrile copolymers -- Determination of residual acrylonitrile monomer content -- Gas chromatography method 90.93 TC 61/SC 5
ISO 4608:1998
Plastics -- Homopolymer and copolymer resins of vinyl chloride for general use -- Determination of plasticizer absorption at room temperature 90.92 TC 61/SC 9
ISO/DIS 4608
Plastics -- Homopolymer and copolymer resins of vinyl chloride for general use -- Determination of plasticizer absorption at room temperature 40.93 TC 61/SC 9
ISO 4610:2001
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus 90.93 TC 61/SC 9
ISO 4612:1999
Plastics -- Preparation of PVC pastes for test purposes -- Planetary-mixer method 90.60 TC 61/SC 9
ISO 4613-1:1993
Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 1: Designation and specification 90.60 TC 61/SC 9
ISO 4613-2:1995
Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.92 TC 61/SC 9
ISO/DIS 4613-2
Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 40.99 TC 61/SC 9
ISO 4613-2:1995/Amd 1:2004
60.60 TC 61/SC 9
ISO 4894-1:1997
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO 4894-2:1995
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 9
ISO 6186:1998
Plastics -- Determination of pourability 90.93 TC 61/SC 9
ISO 6401:2008
Plastics -- Poly(vinyl chloride) -- Determination of residual vinyl chloride monomer -- Gas-chromatographic method 60.60 TC 61/SC 5
ISO 6402-1:2002
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO 6402-2:2003
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.92 TC 61/SC 9
ISO/DIS 6402-2
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 40.99 TC 61/SC 9
ISO 6691:2000
Thermoplastic polymers for plain bearings -- Classification and designation 90.93 TC 123/SC 2
ISO 7391-1:2006
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.60 TC 61/SC 9
ISO 7391-2:2006
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.60 TC 61/SC 9
ISO/CD 7792-1
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 30.99 TC 61/SC 9
ISO 7792-1:1997
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.92 TC 61/SC 9
ISO 7792-2:1997
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.92 TC 61/SC 9
ISO/CD 7792-2
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 30.99 TC 61/SC 9
ISO 8257-1:1998
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO 8257-2:2001
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 9
ISO 8985:1998
Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content 90.93 TC 61/SC 9
ISO 8986-1:1993
Plastics -- Polybutene (PB) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.92 TC 61/SC 9
ISO/FDIS 8986-1
Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 50.00 TC 61/SC 9
ISO 8986-2:1995
Plastics -- Polybutene (PB) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.92 TC 61/SC 9
ISO/FDIS 8986-2
Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 50.00 TC 61/SC 9
ISO 8986-2:1995/Amd 1:2000
60.60 TC 61/SC 9
ISO 9113:1986
Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Determination of isotactic index 90.93 TC 61/SC 9
ISO 9988-1:2004
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO 9988-2:2006
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.60 TC 61/SC 9
ISO 10350-1:2007
Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials 60.60 TC 61/SC 2
ISO 10366-1:2002
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO 10366-2:2003
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 9
ISO/DIS 11337
Plastics -- Polyamides -- Determination of e-caprolactam and w-laurolactam by gas chromatography 40.20 TC 61/SC 5
ISO 11337:2004
Plastics -- Polyamides -- Determination of e-caprolactam and w-laurolactam by gas chromatography 90.92 TC 61/SC 5
ISO 11337:2004/Cor 1:2007
60.60 TC 61/SC 5
ISO 11468:1997
Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method 90.93 TC 61/SC 9
ISO/DIS 11542-1
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 40.99 TC 61/SC 9
ISO 11542-1:2001
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.92 TC 61/SC 9
ISO 11542-2:1998
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 9
ISO 11542-2:1998/Cor 1:2007
60.60 TC 61/SC 9
ISO 12000:2000
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods 90.93 TC 61/SC 9
ISO 12086-1:2006
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.60 TC 61/SC 9
ISO 12086-1:2006/Cor 1:2006
60.60 TC 61/SC 9
ISO 12086-2:2006
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.60 TC 61/SC 9
ISO 12086-2:2006/Cor 1:2006
60.60 TC 61/SC 9
ISO/CD 12418-1
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications 30.20 TC 61/SC 9
ISO/CD 12418-2
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle reyclates -- Part 2: Preparation of test specimens and determination of properties 30.20 TC 61/SC 9
ISO 14446:1999
Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions 90.93 TC 35/SC 10
ISO 14663-1:1999
Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.60 TC 61/SC 9
ISO 14663-2:1999
Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 90.60 TC 61/SC 9
ISO/WD 14910-1
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specifications 20.99 TC 61/SC 9
ISO 14910-1:1997
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specifications 90.92 TC 61/SC 9
ISO/CD 14910-2
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties 30.20 TC 61/SC 9
ISO 14910-2:1997
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties 90.92 TC 61/SC 9
ISO 15023-1:2001
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO 15023-2:2003
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 2: Determination of properties 90.93 TC 61/SC 9
ISO 15103-1:2000
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 9
ISO 15103-2:2007
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 60.60 TC 61/SC 9
ISO 15373:2001
Plastics -- Polymer dispersions -- Determination of free formaldehyde 90.93 TC 61/SC 9
ISO 15853:1999
Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding 90.93 TC 138/SC 5
ISO 16770:2004
Plastics -- Determination of environmental stress cracking (ESC) of polyethylene -- Full-notch creep test (FNCT) 90.92 TC 61/SC 9
ISO 16790:2005
Plastics -- Determination of drawing characteristics of thermoplastics in the molten state 90.93 TC 61/SC 5
ISO 18064:2003
Thermoplastic elastomers -- Nomenclature and abbreviated terms 90.93 TC 45
ISO 22498:2005
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Particle size determination by mechanical sieving 90.93 TC 61/SC 9
ISO 24538:2008
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder 60.60 TC 61/SC 5
ISO 25137-1:2009
Plastics -- Sulfone polymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications 60.60 TC 61/SC 9
ISO 25137-2:2009
Plastics -- Sulfone polymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 60.60 TC 61/SC 9
ISO/DIS 27547-1
Plastics -- Preparation of test specimens of thermoplastic materials using mouldless technologies -- Part 1: General principles, and laser sintering of specimens 40.99 TC 61/SC 9
ISO/PRF 28078-1
Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 50.00 TC 61/SC 9
ISO/PRF 28078-2
Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 50.00 TC 61/SC 9
ISO 28941-1:2008
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications 60.60 TC 61/SC

83.100 Cellular materials
Standard and/or project TC
ISO 844:2007
Rigid cellular plastics -- Determination of compression properties 60.60 TC 61/SC 10
ISO 845:2006
Cellular plastics and rubbers -- Determination of apparent density 90.60 TC 61/SC 10
ISO 1209-1:2007
Rigid cellular plastics -- Determination of flexural properties -- Part 1: Basic bending test 60.60 TC 61/SC 10
ISO 1209-2:2007
Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity 60.60 TC 61/SC 10
ISO 1663:2007
Rigid cellular plastics -- Determination of water vapour transmission properties 60.60 TC 61/SC 10
ISO 1798:2008
Flexible cellular polymeric materials -- Determination of tensile strength and elongation at break 60.60 TC 45/SC 4
ISO 1856:2000
Flexible cellular polymeric materials -- Determination of compression set 90.93 TC 45/SC 4
ISO 1856:2000/Amd 1:2007
60.60 TC 45/SC 4
ISO 1922:2001
Rigid cellular plastics -- Determination of shear strength 90.92 TC 61/SC 10
ISO/DIS 1922
Rigid cellular plastics -- Determination of shear strength 40.99 TC 61/SC 10
ISO 1923:1981
Cellular plastics and rubbers -- Determination of linear dimensions 90.93 TC 61/SC 10
ISO/FDIS 1926
Rigid cellular plastics -- Determination of tensile properties 50.00 TC 61/SC 10
ISO 1926:2005
Rigid cellular plastics -- Determination of tensile properties 90.92 TC 61/SC 10
ISO 2439:2008
Flexible cellular polymeric materials -- Determination of hardness (indentation technique) 60.60 TC 45/SC 4
ISO 2440:1997
Flexible and rigid cellular polymeric materials -- Accelerated ageing tests 90.93 TC 45/SC 4
ISO 2440:1997/DAmd 1
40.60 TC 45/SC 4
ISO 2796:1986
Cellular plastics, rigid -- Test for dimensional stability 90.93 TC 61/SC 10
ISO 2896:2001
Rigid cellular plastics -- Determination of water absorption 90.93 TC 61/SC 10
ISO 3385:1989
Flexible cellular polymeric materials -- Determination of fatigue by constant-load pounding 90.60 TC 45/SC 4
ISO 3386-1:1986
Polymeric materials, cellular flexible -- Determination of stress-strain characteristics in compression -- Part 1: Low-density materials 90.93 TC 45/SC 4
ISO 3386-1:1986/DAmd 1.2
40.60 TC 45/SC 4
ISO 3386-2:1997
Flexible cellular polymeric materials -- Determination of stress-strain characteristics in compression -- Part 2: High-density materials 90.93 TC 45/SC 4
ISO 3386-2:1997/DAmd 1.2
40.60 TC 45/SC 4
ISO 3582:2000
Flexible cellular polymeric materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame 90.93 TC 45/SC 4
ISO 3582:2000/Amd 1:2007
60.60 TC 45/SC 4
ISO 4590:2002
Rigid cellular plastics -- Determination of the volume percentage of open cells and of closed cells 90.93 TC 61/SC 10
ISO 4638:1984
Polymeric materials, cellular flexible -- Determination of air flow permeability 90.93 TC 45/SC 4
ISO 4651:1988
Cellular rubbers and plastics -- Determination of dynamic cushioning performance 90.93 TC 45/SC 4
ISO 4651:1988/Amd 1:2006
60.60 TC 45/SC 4
ISO 4897:1985
Cellular plastics -- Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures 90.60 TC 61/SC 10
ISO 4898:2008
Rigid cellular plastics -- Thermal insulation products for buildings -- Specifications 90.92 TC 61/SC 10
ISO/DIS 4898
Rigid cellular plastics -- Thermal insulation products for buildings -- Specifications 40.99 TC 61/SC 10
ISO 5999:2007
Flexible cellular polymeric materials -- Polyurethane foam for load-bearing applications excluding carpet underlay -- Specification 60.60 TC 45/SC 4
ISO 6187:2001
Rigid cellular plastics -- Determination of friability 90.93 TC 61/SC 10
ISO 6453:1985
Polymeric materials, cellular flexible -- Polyvinylchloride foam sheeting -- Specification 90.93 TC 45/SC 4
ISO 6915:1991
Flexible cellular polymeric materials -- Polyurethane foam for laminate use -- Specification 90.93 TC 45/SC 4
ISO 6916-1:1995
Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 1: Sheeting 90.93 TC 45/SC 4
ISO 6916-1:1995/Cor 1:2002
Sheeting 60.60 TC 45/SC 4
ISO 6916-1:1995/Amd 1:2007
60.60 TC 45/SC 4
ISO 6916-2:2001
Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 2: Mouldings and extrusions 90.93 TC 45/SC 4
ISO 7214:2007
Cellular plastics -- Polyethylene -- Methods of test 60.60 TC 61/SC 10
ISO 7231:1984
Polymeric materials, cellular flexible -- Method of assessment of air flow value at constant pressure-drop 90.92 TC 45/SC 4
ISO/DIS 7231
Polymeric materials, cellular, flexible -- Determination of air flow value at constant pressure-drop 40.00 TC 45/SC 4
ISO 7616:1986
Cellular plastics, rigid -- Determination of compressive creep under specified load and temperature conditions 90.93 TC 61/SC 10
ISO 7850:1986
Cellular plastics, rigid -- Determination of compressive creep 90.93 TC 61/SC 10
ISO 8067:2008
Flexible cellular polymeric materials -- Determination of tear strength 60.60 TC 45/SC 4
ISO 8307:2007
Flexible cellular polymeric materials -- Determination of resilience by ball rebound 60.60 TC 45/SC 4
ISO 8873-1:2006
Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 1: Material specifications 90.92 TC 61/SC 10
ISO/CD 8873-1
Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 1: Material specifications 30.99 TC 61/SC 10
ISO 8873-2:2007
Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 2: Application 90.92 TC 61/SC 10
ISO/CD 8873-2
Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 2: Application 30.99 TC 61/SC 10
ISO/CD 8873-3
Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 3: Test methods 30.99 TC 61/SC 10
ISO 8873-3:2007
Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 3: Test methods 90.92 TC 61/SC 10
ISO 9054:1990
Cellular plastics, rigid -- Test methods for self-skinned, high-density materials 90.93 TC 61/SC 10
ISO 9772:2001
Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame 90.92 TC 61/SC 4
ISO 9772:2001/Amd 1:2003
Specimens 60.60 TC 61/SC 4
ISO 9774:2004
Thermal insulation for building applications -- Guidelines for selecting properties 90.93 TC 61/SC 10
ISO 10066:1991
Flexible cellular polymeric materials -- Determination of creep in compression 90.93 TC 45/SC 4
ISO 11752:2000
Flexible cellular polymeric materials -- Moulded and extruded sponge or expanded cellular rubber products -- Compressibility test on finished parts 90.93 TC 45/SC 4
ISO 11752:2000/Amd 1:2006
60.60 TC 45/SC 4
ISO 13362:2000
Flexible cellular polymeric materials -- Determination of compression set under humid conditions 90.93 TC 45/SC 4
ISO 20392:2007
Thermal-insulating materials -- Determination of compressive creep 60.60 TC 61/SC 10
ISO 20393:2007
Thermal-insulating materials -- Determination of long-term water absorption by diffusion 60.60 TC 61/SC 10
ISO 20394:2007
Thermal-insulating materials -- Determination of freeze-thaw resistance 60.60 TC 61/SC 10
ISO 24999:2008
Flexible cellular polymeric materials -- Determination of fatigue by a constant-strain procedure 60.60 TC 45/SC 4

83.120 Reinforced plastics
Materials for the reinforcement of plastics, see 59.100
Standard and/or project TC
ISO 75-3:2004
Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics 90.93 TC 61/SC 2
ISO 527-4:1997
Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites 90.93 TC 61/SC 13
ISO 527-5:2009
Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites 60.60 TC 61/SC 13
ISO 1172:1996
Textile-glass-reinforced plastics -- Prepregs, moulding compounds and laminates -- Determination of the textile-glass and mineral-filler content -- Calcination methods 90.93 TC 61/SC 13
ISO 1268-1:2001
Fibre-reinforced plastics -- Methods of producing test plates -- Part 1: General conditions 90.93 TC 61/SC 13
ISO 1268-2:2001
Fibre-reinforced plastics -- Methods of producing test plates -- Part 2: Contact and spray-up moulding 90.93 TC 61/SC 13
ISO 1268-3:2000
Fibre-reinforced plastics -- Methods of producing test plates -- Part 3: Wet compression moulding 90.93 TC 61/SC 13
ISO 1268-4:2005
Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs 90.93 TC 61/SC 13
ISO 1268-4:2005/DAmd 1
40.20 TC 61/SC 13
ISO 1268-5:2001
Fibre-reinforced plastics -- Methods of producing test plates -- Part 5: Filament winding 90.93 TC 61/SC 13
ISO 1268-6:2002
Fibre-reinforced plastics -- Methods of producing test plates -- Part 6: Pultrusion moulding 90.93 TC 61/SC 13
ISO 1268-7:2001
Fibre-reinforced plastics -- Methods of producing test plates -- Part 7: Resin transfer moulding 90.93 TC 61/SC 13
ISO 1268-8:2004
Fibre-reinforced plastics -- Methods of producing test plates -- Part 8: Compression moulding of SMC and BMC 90.93 TC 61/SC 13
ISO 1268-9:2003
Fibre-reinforced plastics -- Methods of producing test plates -- Part 9: Moulding of GMT/STC 90.93 TC 61/SC 13
ISO 1268-10:2005
Fibre-reinforced plastics -- Methods of producing test plates -- Part 10: Injection moulding of BMC and other long-fibre moulding compounds -- General principles and moulding of multipurpose test specimens 90.93 TC 61/SC 13
ISO 1268-11:2005
Fibre-reinforced plastics -- Methods of producing test plates -- Part 11: Injection moulding of BMC and other long-fibre moulding compounds -- Small plates 90.93 TC 61/SC 13
ISO 3597-1:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 1: General considerations and preparation of rods 90.93 TC 61/SC 13
ISO 3597-2:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 2: Determination of flexural strength 90.93 TC 61/SC 13
ISO 3597-3:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength 90.93 TC 61/SC 13
ISO 3597-4:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 4: Determination of apparent interlaminar shear strength 90.93 TC 61/SC 13
ISO 4899:1993
Textile-glass-reinforced thermosetting plastics -- Properties and test methods 90.93 TC 61/SC 13
ISO 4901:1985
Reinforced plastics based on unsaturated polyester resins -- Determination of residual styrene monomer content 90.92 TC 61/SC 12
ISO/CD 4901
Reinforced plastics based on unsaturated polyester resins -- Determination of residual styrene monomer content 30.20 TC 61/SC 12
ISO 7822:1990
Textile glass reinforced plastics -- Determination of void content -- Loss on ignition, mechanical disintegration and statistical counting methods 90.93 TC 61/SC 13
ISO 8604:1988
Plastics -- Prepregs -- Definitions of terms and symbols for designations 90.93 TC 61/SC 1
ISO 8605:2001
Textile-glass-reinforced plastics -- Sheet moulding compound (SMC) -- Basis for a specification 90.93 TC 61/SC 13
ISO 8606:1990
Plastics -- Prepregs -- Bulk moulding compound (BMC) and dough moulding compound (DMC) -- Basis for a specification 90.93 TC 61/SC 13
ISO 9782:1993
Plastics -- Reinforced moulding compounds and prepregs -- Determination of apparent volatile-matter content 90.93 TC 61/SC 13
ISO/DIS 10350-2
Plastics -- Acquisition and presentation of comparable single-point data -- Part 2: Long-fibre-reinforced plastics 40.99 TC 61/SC 2
ISO 10350-2:2001
Plastics -- Acquisition and presentation of comparable single-point data -- Part 2: Long-fibre-reinforced plastics 90.92 TC 61/SC 2
ISO/DIS 10352
Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of mass per unit area 40.20 TC 61/SC 13
ISO 10352:1997
Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of mass per unit area 90.92 TC 61/SC 13
ISO 10406-1:2008
Fibre-reinforced polymer (FRP) reinforcement of concrete -- Test methods -- Part 1: FRP bars and grids 60.60 TC 71/SC 6
ISO 10406-2:2008
Fibre-reinforced polymer (FRP) reinforcement of concrete -- Test methods -- Part 2: FRP sheets 60.60 TC 71/SC 6
ISO 11667:1997
Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of resin, reinforced-fibre and mineral-filler content -- Dissolution methods 90.93 TC 61/SC 13
ISO 12114:1997
Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of cure characteristics 90.93 TC 61/SC 13
ISO 12115:1997
Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of flowability, maturation and shelf life 90.93 TC 61/SC 13
ISO 12115:1997/Cor 1:1998
60.60 TC 61/SC 13
ISO/WD 12815
Fibre-reinforced plastics composites -- Determination of pin-bearing strength 20.99 TC 61/SC 13
ISO/WD 12817
Carbon-fibre-reinforced composites -- Determination of open-hole compressive strength 20.99 TC 61/SC 13
ISO 13003:2003
Fibre-reinforced plastics -- Determination of fatigue properties under cyclic loading conditions 90.93 TC 61/SC 13
ISO/TR 13883:1995
Plastics -- Guide to the writing of test methods 90.93 TC 61/SC 13
ISO 14125:1998
Fibre-reinforced plastic composites -- Determination of flexural properties 90.93 TC 61/SC 13
ISO 14125:1998/CD Amd 1
30.99 TC 61/SC 13
ISO 14125:1998/Cor 1:2001
60.60 TC 61/SC 13
ISO 14126:1999
Fibre-reinforced plastic composites -- Determination of compressive properties in the in-plane direction 90.60 TC 61/SC 13
ISO 14126:1999/Cor 1:2001
60.60 TC 61/SC 13
ISO 14127:2008
Carbon-fibre-reinforced composites -- Determination of the resin, fibre and void contents 60.60 TC 61/SC 13
ISO 14129:1997
Fibre-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method 90.93 TC 61/SC 13
ISO 14130:1997
Fibre-reinforced plastic composites -- Determination of apparent interlaminar shear strength by short-beam method 90.93 TC 61/SC 13
ISO 14130:1997/Cor 1:2003
60.60 TC 61/SC 13
ISO 15024:2001
Fibre-reinforced plastic composites -- Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials 90.93 TC 61/SC 13
ISO 15034:1999
Composites -- Prepregs -- Determination of resin flow 90.93 TC 61/SC 13
ISO 15040:1999
Composites -- Prepregs -- Determination of gel time 90.93 TC 61/SC 13
ISO 15310:1999
Fibre-reinforced plastic composites -- Determination of the in-plane shear modulus by the plate twist method 90.60 TC 61/SC 13
ISO 17771:2003
Plastics -- Thermoset moulding compounds -- Determination of the degree of fibre wetting in SMC 90.93 TC 61/SC 13
ISO 18352
Carbon-fibre-reinforced plastics -- Determination of compression-after-impact properties at a specified impact-energy level 60.00 TC 61/SC 13
ISO 22314:2006
Plastics -- Glass-fibre-reinforced products -- Determination of fibre length 90.92 TC 61/SC 13

83.140 Rubber and plastics products
Conveyor belts, see 53.040.20
Footwear, see 61.060
Rubber and plastics coated fabrics, see 59.080.40
Transmission belts, see 21.220.10
Tyres, see 83.160
ICS Field
83.140.01 Rubber and plastics products in general
Standard and/or project TC
ISO 3302-1:1996
Rubber -- Tolerances for products -- Part 1: Dimensional tolerances 90.93 TC 45/SC 4
ISO 3302-1:1996/Amd 1:2001
Classification system for flash 60.60 TC 45/SC 4
ISO 3302-2:2008
Rubber -- Tolerances for products -- Part 2: Geometrical tolerances 60.60 TC 45/SC 4
ISO/CD 6072
Hydraulic fluid power -- Compatibility between fluids and standard elastomeric materials 30.20 TC 45/SC 4
ISO 6072:2002
Hydraulic fluid power -- Compatibility between fluids and standard elastomeric materials 90.92 TC 131/SC 7
ISO/TR 9272:2005
Rubber and rubber products -- Determination of precision for test method standards 60.60 TC 45/SC 2
ISO/CD 11853
Rubber -- Determination of magnesium content of raw natural rubber and rubber products by atomic absorption spectrometry 30.99 TC 45/SC 2
ISO 13000-1:2005
Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 1: Requirements and designation 90.93 TC 61/SC 9
ISO 13000-2:2005
Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 9
ISO 15082:1999
Road vehicles -- Tests for rigid plastic safety glazing materials 90.60 TC 22/SC 11
ISO/TR 24699:2009
Rubber and rubber products -- Environmental aspects -- General guidelines for their inclusion in standards 60.60 TC 45

83.140.10 Films and sheets
Including plates
Standard and/or project TC
ISO 527-3:1995
Plastics -- Determination of tensile properties -- Part 3: Test conditions for films and sheets 90.93 TC 61/SC 11
ISO 527-3:1995/Cor 1:1998
60.60 TC 61/SC 2
ISO 527-3:1995/Cor 2:2001
60.60 TC 61/SC 11
ISO 2556:1974
Plastics -- Determination of the gas transmission rate of films and thin sheets under atmospheric pressure -- Manometric method 90.93 TC 61/SC 5
ISO 4591:1992
Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness) 90.93 TC 61/SC 11
ISO 4592:1992
Plastics -- Film and sheeting -- Determination of length and width 90.93 TC 61/SC 11
ISO 4593:1993
Plastics -- Film and sheeting -- Determination of thickness by mechanical scanning 90.93 TC 61/SC 11
ISO 6179:1998
Rubber, vulcanized or thermoplastic -- Rubber sheets and rubber-coated fabrics -- Determination of transmission rate of volatile liquids (gravimetric technique) 90.92 TC 45/SC 2
ISO/DIS 6179
Rubber, vulcanized or thermoplastic -- Rubber sheets and rubber-coated fabrics -- Determination of rate of transmission of volatile liquids (gravimetric technique) 40.99 TC 45/SC 2
ISO 6383-1:1983
Plastics -- Film and sheeting -- Determination of tear resistance -- Part 1: Trouser tear method 90.93 TC 61/SC 11
ISO 6383-2:1983
Plastics -- Film and sheeting -- Determination of tear resistance -- Part 2: Elmendorf method 90.93 TC 61/SC 11
ISO 7765-1:1988
Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 1: Staircase methods 90.93 TC 61/SC 11
ISO 7765-2:1994
Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 2: Instrumented puncture test 90.93 TC 61/SC 11
ISO 7823-1:2003
Plastics -- Poly(methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 1: Cast sheets 90.93 TC 61/SC 11
ISO 7823-2:2003
Plastics -- Poly(methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 2: Extruded sheets 90.93 TC 61/SC 11
ISO 7823-3:2007
Plastics -- Poly(methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 3: Continuous cast sheets 60.60 TC 61/SC 11
ISO 8295:1995
Plastics -- Film and sheeting -- Determination of the coefficients of friction 90.93 TC 61/SC 11
ISO 8296:2003
Plastics -- Film and sheeting -- Determination of wetting tension 90.93 TC 61/SC 11
ISO 8570:1991
Plastics -- Film and sheeting - Determination of cold-crack temperature 90.93 TC 61/SC 11
ISO 11501:1995
Plastics -- Film and sheeting -- Determination of dimensional change on heating 90.93 TC 61/SC 11
ISO 11502:1995
Plastics -- Film and sheeting -- Determination of blocking resistance 90.93 TC 61/SC 11
ISO 11833-1:2007
Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 1: Sheets of thickness not less than 1 mm 90.92 TC 61/SC 11
ISO 11833-2:1998
Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 2: Sheets of thickness less than 1 mm 90.93 TC 61/SC 11
ISO 11963:1995
Plastics -- Polycarbonate sheets -- Types, dimensions and characteristics 90.93 TC 61/SC 11
ISO 12017:1995
Plastics -- Poly(methyl methacrylate) double- and triple-skin sheets -- Test methods 90.93 TC 61/SC 11
ISO/NP 13636
Plastics -- Film and sheeting -- Non-oriented poly(ethylene terephthalate) (PET) sheets 10.99 TC 61/SC 11
ISO 14616:1997
Plastics -- Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures -- Determination of shrinkage stress and contraction stress 90.93 TC 61/SC 11
ISO 14631:1999
Extruded sheets of impact-modified polystyrene (PS-I) -- Requirements and test methods 90.93 TC 61/SC 11
ISO 14632:1998
Extruded sheets of polyethylene (PE-HD) -- Requirements and test methods 90.93 TC 61/SC 11
ISO 15013:2007
Plastics -- Extruded sheets of polypropylene (PP) -- Requirements and test methods 60.60 TC 61/SC 11
ISO 15014:2007
Plastics -- Extruded sheets of poly(vinylidene fluoride) (PVDF) -- Requirements and test methods 60.60 TC 61/SC 11
ISO 15015:2007
Plastics -- Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) -- Requirements and test methods 90.92 TC 61/SC 11
ISO 15105-1:2007
Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 1: Differential-pressure methods 60.60 TC 61/SC 11
ISO 15105-2:2003
Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 2: Equal-pressure method 90.93 TC 61/SC 11
ISO 15106-1:2003
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 1: Humidity detection sensor method 90.93 TC 61/SC 11
ISO 15106-2:2003
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 2: Infrared detection sensor method 90.93 TC 61/SC 11
ISO 15106-3:2003
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 3: Electrolytic detection sensor method 90.93 TC 61/SC 11
ISO 15106-4:2008
Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 4: Gas-chromatographic detection sensor method 60.60 TC 61/SC 11
ISO 15527:2007
Plastics -- Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) -- Requirements and test methods 90.92 TC 61/SC 11
ISO 15987:2003
Plastics -- Film and sheeting -- Biaxially oriented polyamide (nylon) films 90.93 TC 61/SC 11
ISO 15988:2003
Plastics -- Film and sheeting -- Biaxially oriented poly(ethylene terephthalate) (PET) films 90.93 TC 61/SC 11
ISO 15989:2004
Plastics -- Film and sheeting -- Measurement of water-contact angle of corona-treated films 90.93 TC 61/SC 11
ISO 15989:2004/Cor 1:2007
60.60 TC 61/SC 11
ISO 17555:2003
Plastics -- Film and sheeting -- Biaxially oriented polypropylene (PP) films 90.93 TC 61/SC 11
ISO 17557:2003
Plastics -- Film and sheeting -- Cast polypropylene (PP) films 90.93 TC 61/SC 11
ISO 23559:2007
Plastics -- Film and sheeting -- Guidance on the testing of thermoplastic films 60.60 TC 61/SC 11

83.140.20 Laminated sheets
Standard and/or project TC
ISO 4586-1:2004
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 1: Classification and specifications 90.93 TC 61/SC 11
ISO 4586-2:2004
High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 2: Determination of properties 90.93 TC 61/SC 11
ISO 13894-1:2000
High-pressure decorative laminates -- Composite elements -- Part 1: Test methods 90.93 TC 61/SC 11
ISO 13894-2:2005
High-pressure decorative laminates -- Composite elements -- Part 2: Specifications for composite elements with wood-based substrates for interior use 90.93 TC 61/SC 11
ISO 19712-1:2008
Plastics -- Decorative solid surfacing materials -- Part 1: Classification and specifications 60.60 TC 61/SC 11
ISO 19712-2:2007
Plastics -- Decorative solid surfacing materials -- Part 2: Determination of properties -- Sheet goods 60.60 TC 61/SC 11
ISO 19712-3:2007
Plastics -- Decorative solid surfacing materials -- Part 3: Determination of properties -- Solid surface shapes 60.60 TC 61/SC 11

83.140.30 Plastics pipes and fittings for non fluid use
Plastics pipes, fittings and valves for general use, see 23.040.20 23.040.45 23.060
Standard and/or project TC
ISO 4437:2007
Buried polyethylene (PE) pipes for the supply of gaseous fuels -- Metric series -- Specifications 60.60 TC 138/SC 4
ISO 6993-1:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) 90.20 TC 138/SC 4
ISO 6993-2:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa) 90.20 TC 138/SC 4
ISO 6993-3:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) 90.20 TC 138/SC 4
ISO 6993-4:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 4: Code of practice for design, handling and installation 90.20 TC 138/SC 4
ISO/DIS 7628
Road vehicles -- Thermoplastics tubing for air braking systems 40.99 TC 22/SC 2
ISO 7628-1:1998
Road vehicles -- Thermoplastics tubing for air braking systems -- Part 1: Dimensions and marking 90.92 TC 22/SC 2
ISO 7628-2:1998
Road vehicles -- Thermoplastics tubing for air braking systems -- Part 2: Mounting on vehicle and test methods 90.92 TC 22/SC 2
ISO 7628-2:1998/Cor 1:1999
60.60 TC 22/SC 2
ISO 8085-1:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 1: Fittings for socket fusion using heated tools 90.93 TC 138/SC 4
ISO 8085-1:2001/Cor 1:2008
60.60 TC 138/SC 4
ISO 8085-2:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings 90.93 TC 138/SC 4
ISO 8085-2:2001/Cor 1:2001
60.60 TC 138/SC 4
ISO 8085-2:2001/Cor 2:2008
60.60 TC 138/SC 4
ISO 8085-3:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 3: Electrofusion fittings 90.93 TC 138/SC 4
ISO 8085-3:2001/Cor 1:2007
60.60 TC 138/SC 4
ISO 8085-3:2001/Cor 2:2008
60.60 TC 138/SC 4
ISO 8233:1988
Thermoplastics valves -- Torque -- Test method 90.20 TC 138/SC 7
ISO 8659:1989
Thermoplastics valves -- Fatigue strength -- Test method 90.93 TC 138/SC 7
ISO 9393-1:2004
Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General 90.93 TC 138/SC 7
ISO 9393-2:2005
Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements 90.93 TC 138/SC 7
ISO 9808:1990
Solar water heaters -- Elastomeric materials for absorbers, connecting pipes and fittings -- Method of assessment 90.93 TC 180
ISO 10838-1:2000
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm 90.93 TC 138/SC 4
ISO 10838-3:2001
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm 90.93 TC 138/SC 4
ISO 10933:1997
Polyethylene (PE) valves for gas distribution systems 90.93 TC 138/SC 7
ISO 11424:1996
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines -- Specification 90.60 TC 45/SC 1
ISO 13775-1:2000
Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications 90.93 TC 45/SC 1
ISO 13775-2:2000
Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications 90.92 TC 45/SC 1
ISO/NP 14692-1
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials 10.99 TC 67/SC 6
ISO 14692-1:2002
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials 90.92 TC 67/SC 6
ISO 14692-2:2002
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture 90.92 TC 67/SC 6
ISO/NP 14692-2
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture 10.99 TC 67/SC 6
ISO 14692-2:2002/Cor 1:2005
60.60 TC 67/SC 6
ISO 14692-3:2002
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design 90.92 TC 67/SC 6
ISO/NP 14692-3
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design 10.99 TC 67/SC 6
ISO 14692-3:2002/Cor 1:2005
60.60 TC 67/SC 6
ISO 14692-4:2002
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation 90.92 TC 67/SC 6
ISO/NP 14692-4
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation 10.99 TC 67/SC 6
ISO 14692-4:2002/Cor 1:2006
60.60 TC 67/SC 6
ISO 15840:2004
Ships and marine technology -- Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications 90.93 TC 8/SC 3
ISO 22621-1:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 1: General 60.60 TC 138/SC 4
ISO 22621-2:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 2: Pipes 60.60 TC 138/SC 4
ISO 22621-3:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 3: Fittings 60.60 TC 138/SC 4
ISO/DIS 22621-5
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 5: Fitness for purpose of the system 40.60 TC 138/SC 4
ISO/DIS 22621-6
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -- Polyamide (PA) -- Part 6: Code of practice for design, handling and installation 40.60 TC 138/SC 4

83.140.40 Hoses
Hoses for general use, see 23.040.70
Standard and/or project TC
ISO 1401:1999
Rubber hoses for agricultural spraying 90.60 TC 45/SC 1
ISO 1436:2009
Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification 60.60 TC 45/SC 1
ISO 1823-1:1997
Rubber hoses and hose assemblies -- Part 1: On-shore oil suction and discharge -- Specification 90.60 TC 45/SC 1
ISO 1823-2:1997
Rubber hoses and hose assemblies -- Part 2: Ship/dockside discharge -- Specification 90.60 TC 45/SC 1
ISO 1825:1996
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling -- Specification 90.92 TC 45/SC 1
ISO/FDIS 1825
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling -- Specification 50.00 TC 45/SC 1
ISO 2928:2003
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) -- Specification 90.93 TC 45/SC 1
ISO 2929:2002
Rubber hoses and hose assemblies for bulk fuel delivery by truck -- Specification 90.93 TC 45/SC 1
ISO 3821:2008
Gas welding equipment -- Rubber hoses for welding, cutting and allied processes 60.60 TC 44/SC 8
ISO 3861:2005
Rubber hoses for sand and grit blasting -- Specification 90.93 TC 45/SC 1
ISO 3862:2009
Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids -- Specification 60.60 TC 45/SC 1
ISO 3949:2004
Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications -- Specification 90.92 TC 45/SC 1
ISO/FDIS 3949
Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications -- Specification 50.20 TC 45/SC 1
ISO 3996:1995
Road vehicles -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid 90.92 TC 22/SC 2
ISO 4038:1996
Road vehicles -- Hydraulic braking systems -- Simple flare pipes, tapped holes, male fittings and hose end fittings 90.60 TC 22/SC 2
ISO 4079:2009
Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids -- Specification 60.60 TC 45/SC 1
ISO 4081:2005
Rubber hoses and tubing for cooling systems for internal-combustion engines -- Specification 90.92 TC 45/SC 1
ISO/DIS 4081
Rubber hoses and tubing for cooling systems for internal-combustion engines -- Specification 40.20 TC 45/SC 1
ISO 4642-1:2009
Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems 60.60 TC 45/SC 1
ISO 4642-2:2009
Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles 60.60 TC 45/SC 1
ISO 4671:2007
Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies 60.60 TC 45/SC 1
ISO 5359:2008
Low-pressure hose assemblies for use with medical gases 60.60 TC 121/SC 1
ISO 5771:2008
Rubber hoses and hose assemblies for transferring anhydrous ammonia -- Specification 60.60 TC 45/SC 1
ISO 5772:1998
Rubber hoses and hose assemblies for measured fuel dispensing -- Specification 90.60 TC 45/SC 1
ISO 6120:1995
Road vehicles -- Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid 90.93 TC 22/SC 2
ISO 6605:2002
Hydraulic fluid power -- Hoses and hose assemblies -- Test methods 90.60 TC 131/SC 4
ISO/CD 6772
Aerospace -- Fluid systems -- Impulse testing of hydraulic hose, tubing and fitting assemblies 30.60 TC 20/SC 10
ISO 6772:1988
Aerospace -- Fluid systems -- Impulse testing of hydraulic hose, tubing and fitting assemblies 90.92 TC 20/SC 10
ISO 6804:1991
Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers -- Specification 90.92 TC 45/SC 1
ISO/FDIS 6804
Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers -- Specification 50.20 TC 45/SC 1
ISO 6805:1994
Rubber hoses and hose assemblies for underground mining -- Wire-reinforced hydraulic types for coal mining -- Specification 90.93 TC 45/SC 1
ISO 6806:1992
Rubber hoses and hose assemblies for use in oil burners -- Specification 90.93 TC 45/SC 1
ISO 6807:2003
Rubber hoses and hose assemblies for rotary drilling and vibration applications -- Specification 90.93 TC 45/SC 1
ISO 6808:1999
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids -- Specification 90.60 TC 45/SC 1
ISO 7258:1984
Polytetrafluoroethylene (PTFE) tubing for aerospace applications -- Methods for the determination of the density and relative density 90.20 TC 20/SC 10
ISO 7313:1984
Aircraft -- High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) 90.60 TC 20/SC 10
ISO 8028:1999
Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification 90.60 TC 45/SC 1
ISO 8066-2:2001
Rubber and plastics hoses and hose assemblies for automotive air conditioning -- Specification -- Part 2: Refrigerant 134a 90.93 TC 45/SC 1
ISO 8153-1:2009
Aerospace fluid systems and components -- Vocabulary -- Part 1: Hose assemblies 60.60 TC 20/SC 10
ISO 8207:1996
Gas welding equipment -- Specification for hose assemblies for equipment for welding, cutting and allied processes 90.93 TC 44/SC 8
ISO/TR 8354:1987
Rubber hoses and hose assemblies for underground mining -- Textile-reinforced air and water type 90.93 TC 45/SC 1
ISO/FDIS 8789
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles -- Specification 50.00 TC 45/SC 1
ISO 8789:1994
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles -- Specification 90.92 TC 45/SC 1
ISO 8829-1:2009
Aerospace -- Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies -- Part 1: Metallic (stainless steel) braid 60.60 TC 20/SC 10
ISO 8829-2:2006
Aerospace -- Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies -- Part 2: Non-metallic braid 90.20 TC 20/SC 10
ISO 8913:2006
Aerospace -- Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) -- Procurement specification 60.60 TC 20/SC 10
ISO 9528:1994
Aerospace -- Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa -- Procurement specification 90.20 TC 20/SC 10
ISO 9938:1994
Aerospace -- Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa -- Procurement specification 90.20 TC 20/SC 10
ISO 10502:1992
Aerospace -- Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 degrees C and 10 500 kPa -- Procurement specification 90.92 TC 20/SC 10
ISO/NP 10502
Aerospace -- Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 degrees C and 10 500 kPa -- Procurement specification 10.99 TC 20/SC 10
ISO/DIS 11237
Rubber hoses and hose assemblies -- Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification 40.60 TC 45/SC 1
ISO 11237-1:2004
Rubber hoses and hose assemblies -- Wire-braid-reinforced compact types for hydraulic applications -- Specification -- Part 1: Oil-based fluid applications 90.92 TC 45/SC 1
ISO 11237-2:2006
Rubber hoses and hose assemblies -- Wire-braid-reinforced compact types for hydraulic applications -- Specification -- Part 2: Water-based fluid applications 90.92 TC 45/SC 1
ISO/TR 11340:1994
Rubber and rubber products -- Hydraulic hose assemblies -- External leakage classification for hydraulic systems 90.93 TC 45/SC 1
ISO 11424:1996
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines -- Specification 90.60 TC 45/SC 1
ISO 11425:1996
Rubber hoses and hose assemblies for automobile power-steering systems -- Specification 90.60 TC 45/SC 1
ISO 11759:1999
Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) -- Specification 90.92 TC 45/SC 1
ISO 12170:1996
Gas welding equipment -- Thermoplastic hoses for welding and allied processes 90.93 TC 44/SC 8
ISO 13363:2004
Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification 90.93 TC 45/SC 1
ISO 13363:2004/Cor 1:2008
60.60 TC 45/SC 1
ISO 13774:1998
Rubber and plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 90.93 TC 45/SC 1
ISO 13775-1:2000
Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications 90.93 TC 45/SC 1
ISO 13775-2:2000
Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications 90.92 TC 45/SC 1
ISO 14113:2007
Gas welding equipment -- Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) 60.60 TC 44/SC 8
ISO 14557:2002
Fire-fighting hoses -- Rubber and plastics suction hoses and hose assemblies 90.93 TC 45/SC 1
ISO 14557:2002/Amd 1:2007
60.60 TC 45/SC 1
ISO 15540:1999
Ships and marine technology -- Fire resistance of hose assemblies -- Test methods 90.20 TC 8/SC 3
ISO 15540:1999/Cor 1:1999
60.60 TC 8/SC 3
ISO 15541:1999
Ships and marine technology -- Fire resistance of hose assemblies -- Requirements for the test bench 90.20 TC 8/SC 3
ISO 19013-1:2005
Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 1: Diesel fuels 90.93 TC 45/SC 1
ISO 19013-2:2005
Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 2: Gasoline fuels 90.93 TC 45/SC 1
ISO 21012:2006
Cryogenic vessels -- Hoses 60.60 TC 220
ISO 23297:2008
Thermoplastics hoses and hose assemblies -- Wire or synthetic yarn reinforced single-pressure types for hydraulic applications -- Specification 60.60 TC 45/SC 1
ISO 28017:2009
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications -- Specification 60.60 TC 45/SC 1

83.140.50 Seals
Seals for general use, see 21.140 23.040.80
Standard and/or project TC
ISO 1749:1973
Aircraft -- Elastomeric sealing rings -- Packaging and identification 90.20 TC 20/SC 10
ISO 3601-1:2008
Fluid power systems -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and designation codes 60.60 TC 131/SC 7
ISO 3601-1:2008/Cor 1:2009
60.60 TC 131/SC 7
ISO 3601-2:2008
Fluid power systems -- O-rings -- Part 2: Housing dimensions for general applications 60.60 TC 131/SC 7
ISO 3601-3:2005
Fluid power systems -- O-rings -- Part 3: Quality acceptance criteria 90.60 TC 131/SC 7
ISO 3601-4:2008
Fluid power systems -- O-rings -- Part 4: Anti-extrusion rings (back-up rings) 60.60 TC 131/SC 7
ISO/NP 3601-5
Fluid power systems -- O-rings -- Part 5: Suitability of elastomeric materials for industrial applications 10.99 TC 131/SC 7
ISO 3601-5:2002
Fluid power systems -- O-rings -- Part 5: Suitability of elastomeric materials for industrial applications 90.92 TC 131/SC 7
ISO 3934:2002
Rubber, vulcanized and thermoplastic -- Preformed gaskets used in buildings -- Classification, specifications and test methods 90.93 TC 45/SC 4
ISO 3939:1977
Fluid power systems and components -- Multiple lip packing sets -- Methods for measuring stack heights 90.93 TC 131/SC 7
ISO 4633:2002
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials 90.93 TC 45/SC 4
ISO 4635:1982
Rubber, vulcanized -- Preformed compression seals for use between concrete motorway paving sections -- Specification for material 90.92 TC 45/SC 4
ISO/CD 4635
Rubber, vulcanized -- Preformed compression seals for use between concrete motorway paving sections -- Specification 30.60 TC 45/SC 4
ISO 4927:2005
Road vehicles -- Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) 90.60 TC 22/SC 2
ISO 4928:2006
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) 90.60 TC 22/SC 2
ISO 4930:2006
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.) 90.60 TC 22/SC 2
ISO 5892:1981
Rubber building gaskets -- Materials for preformed solid vulcanized structural gaskets -- Specification 90.60 TC 45/SC 4
ISO 6117:2005
Road vehicles -- Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.) 90.60 TC 22/SC 2
ISO 6118:2006
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.) 90.60 TC 22/SC 2
ISO 6119:2006
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) 90.60 TC 22/SC 2
ISO 6194-1:2007
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 1: Nominal dimensions and tolerances 60.60 TC 131/SC 7
ISO 6194-2:2009
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 2: Vocabulary 60.60 TC 131/SC 7
ISO 6194-3:1988
Rotary shaft lip type seals -- Part 3: Storage, handling and installation 90.92 TC 131/SC 7
ISO/FDIS 6194-3
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 3: Storage, handling and installation 50.20 TC 131/SC 7
ISO 6194-4:2009
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 4: Performance test procedures 60.60 TC 131/SC 7
ISO 6194-5:2008
Rotary-shaft lip-type seals incorporating elastomeric sealing elements -- Part 5: Identification of visual imperfections 60.60 TC 131/SC 7
ISO 6447:1983
Rubber seals -- Joint rings used for gas supply pipes and fittings -- Specification for material 90.93 TC 45/SC 4
ISO 6448:1985
Rubber seals -- Joint rings used for petroleum product supply pipes and fittings -- Specification for material 90.93 TC 45/SC 4
ISO 7630:1985
Road vehicles -- Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) 90.93 TC 22/SC 2
ISO 7631:1985
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) 90.60 TC 22/SC 2
ISO 7632:1985
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) 90.60 TC 22/SC 2
ISO 7633:1985
Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) 90.60 TC 22/SC 2
ISO 7986:1997
Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications 90.93 TC 131/SC 7
ISO 9553:1997
Solar energy -- Methods of testing preformed rubber seals and sealing compounds used in collectors 90.93 TC 180
ISO 9631:2003
Rubber seals -- Joint rings for pipelines for hot-water supply up to 110 degrees C -- Specification for the material 90.93 TC 45/SC 4
ISO 16010:2005
Elastomeric seals -- Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids 90.93 TC 45/SC 4
ISO 16589-1:2001
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 1: Nominal dimensions and tolerances 90.92 TC 131/SC 7
ISO/NP 16589-1
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 1: Nominal dimensions and tolerances 10.99 TC 131/SC 7
ISO 16589-2:2001
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 2: Vocabulary 90.92 TC 131/SC 7
ISO/NP 16589-2
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 2: Vocabulary 10.99 TC 131/SC 7
ISO 16589-3:2001
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 3: Storage, handling and installation 90.92 TC 131/SC 7
ISO/NP 16589-3
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 3: Storage, handling and installation 10.99 TC 131/SC 7
ISO 16589-4:2001
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 4: Performance test procedures 90.92 TC 131/SC 7
ISO/NP 16589-4
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 4: Performance test procedures 10.99 TC 131/SC 7
ISO 16589-5:2001
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 5: Identification of visual imperfections 90.92 TC 131/SC 7
ISO/NP 16589-5
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 5: Identification of visual imperfections 10.99 TC 131/SC 7
ISO 21049:2004
Pumps -- Shaft sealing systems for centrifugal and rotary pumps 90.92 TC 115/SC 3
ISO/NP 21049
Pumps -- Shaft sealing systems for centrifugal and rotary pumps 10.99 TC 115/SC 3
ISO 23711:2003
Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers 90.93 TC 45/SC 4
ISO 27996:2009
Aerospace fluid systems -- Elastomer seals -- Storage and shelf life 60.60 TC 20/SC 10

83.140.99 Other rubber and plastics products
Standard and/or project TC
ISO 2321:2006
Rubber threads -- Methods of test 90.60 TC 45/SC 4
ISO 4643:1992
Moulded plastics footwear -- Lined or unlined poly(vinyl chloride) boots for general industrial use -- Specification 90.93 TC 94/SC 3
ISO 6123-1:1982
Rubber or plastics covered rollers -- Specifications -- Part 1: Requirements for hardness 90.60 TC 45/SC 4
ISO 6123-2:1988
Rubber- or plastics-covered rollers -- Specifications -- Part 2: Surface characteristics 90.60 TC 45/SC 4
ISO 6123-3:1985
Rubber- or plastics-covered rollers -- Specifications -- Part 3: Dimensional tolerances 90.93 TC 45/SC 4
ISO 6446:1994
Rubber products -- Bridge bearings -- Specification for rubber materials 90.60 TC 45/SC 4
ISO 7267-1:2008
Rubber-covered rollers -- Determination of apparent hardness -- Part 1: IRHD method 60.60 TC 45/SC 2
ISO 7267-2:2008
Rubber-covered rollers -- Determination of apparent hardness -- Part 2: Shore-type durometer method 60.60 TC 45/SC 2
ISO 7267-3:2007
Rubber-covered rollers -- Determination of apparent hardness -- Part 3: Pusey and Jones method 60.60 TC 45/SC 2
ISO/TR 7621:1982
Rubber or plastics covered rollers -- Enquiries and orders -- Recommendations for technical information to be supplied by purchaser 90.93 TC 45/SC 4
ISO/TR 8517:1988
Rubber- or plastics-covered rollers -- Glossary 90.93 TC 45/SC 4
ISO 10282:2002
Single-use sterile rubber surgical gloves -- Specification 90.93 TC 45/SC 4
ISO 10282:2002/Cor 1:2005
60.60 TC 45/SC 4
ISO 11193-1:2008
Single-use medical examination gloves -- Part 1: Specification for gloves made from rubber latex or rubber solution 60.60 TC 45/SC 4
ISO 11193-2:2006
Single-use medical examination gloves -- Part 2: Specification for gloves made from poly(vinyl chloride) 90.60 TC 45/SC 4
ISO 12771:1997
Plastics laboratory ware -- Disposable serological pipettes 90.93 TC 48/SC 6
ISO/AWI 12856
Plastic railway sleepers 20.00 TC 61/SC 11
ISO/WD 13106
Blow-moulded polypropylene containers for packaging of liquid foodstuffs 20.20 TC 61/SC 11
ISO 17357:2002
Ships and marine technology -- High-pressure floating pneumatic rubber fenders 90.92 TC 8/SC 4
ISO/DIS 22762-1
Elastomeric seismic-protection isolators -- Part 1: Test methods 40.20 TC 45/SC 4
ISO 22762-1:2005
Elastomeric seismic-protection isolators -- Part 1: Test methods 90.92 TC 45/SC 4
ISO 22762-1:2005/Cor 1:2006
60.60 TC 45/SC 4
ISO 22762-2:2005
Elastomeric seismic-protection isolators -- Part 2: Applications for bridges -- Specifications 90.92 TC 45/SC 4
ISO/DIS 22762-2
Elastomeric seismic-protection isolators -- Part 2: Applications for bridges -- Specifications 40.20 TC 45/SC 4
ISO 22762-2:2005/Cor 1:2006
60.60 TC 45/SC 4
ISO 22762-3:2005
Elastomeric seismic-protection isolators -- Part 3: Applications for buildings -- Specifications 90.92 TC 45/SC 4
ISO/DIS 22762-3
Elastomeric seismic-protection isolators -- Part 3: Applications for buildings -- Specifications 40.20 TC 45/SC 4
ISO 22762-3:2005/Cor 1:2006
60.60 TC 45/SC 4
ISO 23560:2008
Woven polypropylene sacks for bulk packaging of foodstuffs 60.60 TC 61/SC 11
ISO 24998:2008
Plastics laboratory ware -- Single-use Petri dishes for microbiological procedures 60.60 TC 48/SC 6
ISO/FDIS 25518
Single-use rubber gloves for general applications -- Specification 50.20 TC 45/SC 4

83.160 Tyres
Including tubes and valves
83.160.01 Tyres in general
Standard and/or project TC
ISO 3877-1:1997
Tyres, valves and tubes -- List of equivalent terms -- Part 1: Tyres 90.60 TC 31
ISO 3877-2:1997
Tyres, valves and tubes -- List of equivalent terms -- Part 2: Tyre valves 90.60 TC 31
ISO 3877-3:1978
Tyres, valves and tubes -- List of equivalent terms -- Part 3: Tubes 90.60 TC 31
ISO 3877-4:1984
Tyres, valves and tubes -- List of equivalent terms -- Part 4: Solid tyres 90.60 TC 31
ISO 4223-1:2002
Definitions of some terms used in the tyre industry -- Part 1: Pneumatic tyres 90.60 TC 31
ISO 4223-1:2002/CD Amd 1
30.20 TC 31
ISO 4223-2:1991
Definitions of some terms used in the tyre industry -- Part 2: Solid tyres 90.60 TC 31
ISO 4570:2002
Tyre valve threads 90.60 TC 31/SC 9
ISO 9413:1998
Tyre valves -- Dimensions and designation 90.92 TC 31/SC 9
ISO/AWI 9413
Tyre valves -- Dimensions and designation 20.00 TC 31/SC 9
ISO 9413:1998/Amd 1:2001
Addition of valves using ISO core chamber No.3 90.92 TC 31/SC 9
ISO 9413:1998/Amd 2:2004
90.92 TC 31/SC 9
ISO 13326:1998
Test methods for measuring tyre uniformity 90.60 TC 31
ISO 14960:2004
Tubeless tyres -- Valves and components -- Test methods 90.60 TC 31/SC 9
ISO 16392:2007
Tyres -- Electrical resistance -- Test method for measuring electrical resistance of tyres on a test rig 60.60 TC 31
ISO 17832:2009
Non-parallel steel wire and cords for tyre reinforcement 60.60 TC 17/SC 17
ISO 20562:2004
Tyre valves -- ISO core chambers No. 1, No. 2 and No. 3 90.60 TC 31/SC 9
ISO 28580:2009
Passenger car, truck and bus tyres -- Methods of measuring rolling resistance -- Single point test and correlation of measurement results 60.60 TC 31
ISO/TR 29846:2008
Tyres, valves and tubes -- kPa/psi equivalencies for inflation pressures 60.60 TC 31

83.160.10 Road vehicle tyres
Including cycle tyres, and tyre retreading and repair processes
Standard and/or project TC
ISO 4000-1:2007
Passenger car tyres and rims -- Part 1: Tyres (metric series) 90.92 TC 31/SC 3
ISO/DIS 4000-1
Passenger car tyres and rims -- Part 1: Tyres (metric series) 40.60 TC 31/SC 3
ISO 4209-1:2001
Truck and bus tyres and rims (metric series) -- Part 1: Tyres 90.60 TC 31/SC 4
ISO 4249-1:1985
Motorcycle tyres and rims (Code-designated series) -- Part 1: Tyres 90.93 TC 31/SC 10
ISO 4249-2:1990
Motorcycle tyres and rims (Code-designated series) -- Part 2: Tyre load ratings 90.93 TC 31/SC 10
ISO 5751-1:2004
Motorcycle tyres and rims (metric series) -- Part 1: Design guides 90.92 TC 31/SC 10
ISO/DIS 5751-1
Motorcycle tyres and rims (metric series) -- Part 1: Design guides 40.20 TC 31/SC 10
ISO 5751-1:2004/Cor 1:2006
60.60 TC 31/SC 10
ISO/DIS 5751-2
Motorcycle tyres and rims (metric series) -- Part 2: Tyre dimensions and load-carrying capacities 40.20 TC 31/SC 10
ISO 5751-2:2004
Motorcycle tyres and rims (metric series) -- Part 2: Tyre dimensions and load-carrying capacities 90.92 TC 31/SC 10
ISO/DIS 5751-3
Motorcycle tyres and rims (metric series) -- Part 3: Range of approved rim contours 40.20 TC 31/SC 10
ISO 5751-3:2004
Motorcycle tyres and rims (metric series) -- Part 3: Range of approved rim contours 90.92 TC 31/SC 10
ISO 5775-1:1997
Bicycle tyres and rims -- Part 1: Tyre designations and dimensions 90.60 TC 31/SC 10
ISO 6054-1:1994
Motorcycle tyres and rims (Code-designated series) -- Diameter codes 4 to 12 -- Part 1: Tyres 90.93 TC 31/SC 10
ISO 9112:2008
Truck and bus tyres -- Methods of measuring tyre rolling circumference -- Loaded new tyres 60.60 TC 31/SC 4
ISO 10191:1995
Passenger car tyres -- Verifying tyre capabilities -- Laboratory test methods 90.92 TC 31/SC 3
ISO 10191:1995/Amd 1:1998
60.60 TC 31/SC 3
ISO 10231:2003
Motorcycle tyres -- Test methods for verifying tyre capabilities 90.60 TC 31/SC 10
ISO 10454:1993
Truck and bus tyres -- Verifying tyre capabilities -- Laboratory test methods 90.60 TC 31/SC 4
ISO 13325:2003
Tyres -- Coast-by methods for measurement of tyre-to-road sound emission 90.60 TC 31
ISO 13328:2000
Motorcycle tyres -- Measurement of tyre rolling circumference -- Loaded new tyres 90.93 TC 31/SC 10
ISO 16992:2006
Passenger car tyres -- Spare unit substitutive equipment (SUSE) 90.92 TC 31/SC 3
ISO/DIS 16992
Passenger car tyres -- Spare unit substitutive equipment (SUSE) 40.60 TC 31/SC 3
ISO 17269:2000
Passenger car tyres -- Methods for measuring rolling circumference -- Loaded new tyres 90.60 TC 31/SC 3
ISO 18164:2005
Passenger car, truck, bus and motorcycle tyres -- Methods of measuring rolling resistance 90.93 TC 31
ISO 18164:2005/DAmd 1
40.20 TC 31
ISO 21750:2006
Road vehicles -- Safety enhancement in conjunction with tyre inflation pressure monitoring 90.92 TC 22
ISO/AWI 21750
Road vehicles -- Safety enhancement in conjunction with tyre inflation pressure monitoring 20.00 TC 22
ISO 23671:2006
Passenger car tyres -- Method for measuring relative wet grip performance -- Loaded new tyres 90.60 TC 31/SC 3
ISO/PRF 29802
All terrain (AT) tyres and rims -- Symbol marked pneumatic tyres on 5 degrees tapered rims -- Designation, dimension, marking and load ratings 50.00 TC 31/SC 10

83.160.20 Aircraft tyres
Standard and/or project TC
ISO 3324-1:1997
Aircraft tyres and rims -- Part 1: Specifications 90.92 TC 31/SC 8
ISO 3324-2:1998
Aircraft tyres and rims -- Part 2: Test methods for tyres 90.92 TC 31/SC 8
ISO 7295:1988
Tyre valves for aircraft -- Interchangeability dimensions 90.20 TC 31/SC 9
ISO 9475:1994
Aircraft inner tube and tubeless tyre valves -- Cores and caps -- Test methods 90.20 TC 31/SC 9

83.160.30 Tyres for agricultural machinery
Standard and/or project TC
ISO 4251-1:2005
Tyres (ply rating marked series) and rims for agricultural tractors and machines -- Part 1: Tyre designation and dimensions, and approved rim contours 90.60 TC 31/SC 5
ISO 4251-1:2005/DAmd 1
40.60 TC 31/SC 5
ISO 4251-2:2005
Tyres (ply rating marked series) and rims for agricultural tractors and machines -- Part 2: Tyre load ratings 90.60 TC 31/SC 5
ISO 4251-3:2006
Tyres (ply rating marked series) and rims for agricultural tractors and machines -- Part 3: Rims 90.20 TC 31/SC 5
ISO/DIS 4251-4
Tyres (ply rating marked series) and rims for agricultural tractors and machines -- Part 4: Tyre classification and nomenclature 40.60 TC 31/SC 5
ISO 4251-4:1992
Tyres (ply rating marked series) and rims for agricultural tractors and machines -- Part 4: Tyre classification and nomenclature 90.92 TC 31/SC 5
ISO 4251-5:1992
Tyres (ply rating marked series) and rims for agricultural tractors and machines -- Part 5: Logging and forestry service tyres 90.60 TC 31/SC 5
ISO 4251-5:1992/Amd 1:1998
60.60 TC 31/SC 5
ISO 7867-1:2005
Tyres and rims (metric series) for agricultural tractors and machines -- Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination 90.60 TC 31/SC 5
ISO 7867-2:2005
Tyres and rims (metric series) for agricultural tractors and machines -- Part 2: Service description and load ratings 90.60 TC 31/SC 5
ISO 7867-2:2005/DAmd 1
. 40.20 TC 31/SC 5
ISO 8664:2005
Tyres for agricultural tractors and machines -- Code-designated and service-description marked radial drive-wheel tyres 90.60 TC 31/SC 5
ISO 8664:2005/DAmd 1
40.60 TC 31/SC 5
ISO 11795:1997
Agricultural tractor drive wheel tyres -- Method of measuring tyre rolling circumference 90.60 TC 31/SC 5
ISO 11795:1997/DAmd 1
40.60 TC 31/SC 5

83.160.99 Other tyres
Standard and/or project TC
ISO 3739-1:2007
Industrial tyres and rims -- Part 1: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims -- Designation, dimensions and marking 60.60 TC 31/SC 7
ISO 3739-2:1992
Industrial tyres and rims -- Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims -- Load ratings 90.60 TC 31/SC 7
ISO 4250-1:2006
Earth-mover tyres and rims -- Part 1: Tyre designation and dimensions 90.20 TC 31/SC 6
ISO 4250-2:2006
Earth-mover tyres and rims -- Part 2: Loads and inflation pressures 90.20 TC 31/SC 6
ISO 10499-1:1991/Cor 1:1997
60.60 TC 31/SC 7
ISO 10499-1:1991
Industrial tyres and rims -- Rubber solid tyres (metric series) for pneumatic tyre rims -- Part 1: Designation, dimensions and marking 90.60 TC 31/SC 7
ISO 10499-2:1998
Industrial tyres and rims -- Rubber solid tyres (metric series) for pneumatic tyre rims -- Part 2: Load ratings 90.60 TC 31/SC 7
ISO 10500:1991
Industrial tyres and rims -- Cylindrical and conical base rubber solid tyres (metric series) -- Designation, dimensions and marking 90.60 TC 31/SC 7
ISO 10571:1995
Tyres for mobile cranes and similar specialized machines 90.92 TC 31/SC 6
ISO/CD 10571
Tyres for mobile cranes and similar specialized machines 30.20 TC 31/SC 6
ISO/CD 13442
Tyres and rims for construction machines 30.60 TC 31/SC 6
ISO 13442:2004
Tyres and rims for construction machines 90.92 TC 31/SC 6

83.180 Adhesives
Including adhesive tapes
Adhesive tapes for electrical insulation purposes, see 29.035.20
Standard and/or project TC
ISO 4578:1997
Adhesives -- Determination of peel resistance of high-strength adhesive bonds -- Floating-roller method 90.93 TC 61/SC 11
ISO 4587:2003
Adhesives -- Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies 90.93 TC 61/SC 11
ISO 6237:2003
Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by tensile loading 90.93 TC 61/SC 11
ISO 6238:2001
Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by compressive loading 90.93 TC 61/SC 11
ISO 7387-1:1983
Adhesives with solvents for assembly of PVC-U pipe elements -- Characterization -- Part 1: Basic test methods 90.60 TC 138/SC 5
ISO 8510-2:2006
Adhesives -- Peel test for a flexible-bonded-to-rigid test specimen assembly -- Part 2: 180 degree peel 90.60 TC 61/SC 11
ISO 9142:2003
Adhesives -- Guide to the selection of standard laboratory ageing conditions for testing bonded joints 90.93 TC 61/SC 11
ISO 9311-1:2005
Adhesives for thermoplastic piping systems -- Part 1: Determination of film properties 90.93 TC 138/SC 5
ISO/CD 9311-2
Adhesives for thermoplastic piping systems -- Part 2: Determination of shear strength 30.99 TC 138/SC 5
ISO 9311-2:2002
Adhesives for thermoplastic piping systems -- Part 2: Determination of shear strength 90.92 TC 138/SC 5
ISO 9311-3:2005
Adhesives for thermoplastic piping systems -- Part 3: Test method for the determination of resistance to internal pressure 90.93 TC 138/SC 5
ISO 9653:1998
Adhesives -- Test method for shear impact strength of adhesive bonds 90.93 TC 61/SC 11
ISO 9664:1993
Adhesives -- Test methods for fatigue properties of structural adhesives in tensile shear 90.93 TC 61/SC 11
ISO 9665:1998
Adhesives -- Animal glues -- Methods of sampling and testing 90.93 TC 61/SC 11
ISO 10123:1990
Adhesives -- Determination of shear strength of anaerobic adhesives using pin-and-collar specimens 90.93 TC 61/SC 11
ISO 10354:1992
Adhesives -- Characterization of durability of structural-adhesive-bonded assemblies -- Wedge rupture test 90.93 TC 61/SC 11
ISO 10363:1992
Hot-melt adhesives -- Determination of thermal stability 90.93 TC 61/SC 11
ISO 10364:2007
Structural adhesives -- Determination of the pot life (working life) of multi-component adhesives 60.60 TC 61/SC 11
ISO 10365:1992
Adhesives -- Designation of main failure patterns 90.93 TC 61/SC 11
ISO 10964:1993
Adhesives -- Determination of torque strength of anaerobic adhesives on threaded fasteners 90.93 TC 61/SC 11
ISO 11003-1:2001
Adhesives -- Determination of shear behaviour of structural adhesives -- Part 1: Torsion test method using butt-bonded hollow cylinders 90.93 TC 61/SC 11
ISO 11003-2:2001
Adhesives -- Determination of shear behaviour of structural adhesives -- Part 2: Tensile test method using thick adherends 90.93 TC 61/SC 11
ISO/DIS 11339
Adhesives -- T-peel test for flexible-to-flexible bonded assemblies 40.99 TC 61/SC 11
ISO 11339:2003
Adhesives -- T-peel test for flexible-to-flexible bonded assemblies 90.92 TC 61/SC 11
ISO 11343:2003
Adhesives -- Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions -- Wedge impact method 90.93 TC 61/SC 11
ISO/CD 13007-1
Ceramic tiles -- Adhesives -- Part 1: Definitions and specifications for adhesives 30.99 TC 189
ISO 13007-1:2004
Ceramic tiles -- Grouts and adhesives -- Part 1: Terms, definitions and specifications for adhesives 90.92 TC 189
ISO 13007-1:2004/Cor 1:2006
60.60 TC 189
ISO 13007-2:2005
Ceramic tiles -- Grouts and adhesives -- Part 2: Test methods for adhesives 90.92 TC 189
ISO/CD 13007-2
Ceramic Tiles -- Adhesives -- Part 2: Test methods for adhesives 30.99 TC 189
ISO 13007-2:2005/Cor 1:2007
60.60 TC 189
ISO 13445:2003
Adhesives -- Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method 90.93 TC 61/SC 11
ISO 14615:1997
Adhesives -- Durability of structural adhesive joints -- Exposure to humidity and temperature under load 90.93 TC 61/SC 11
ISO 14676:1997
Adhesives -- Evaluation of the effectiveness of surface treatment techniques for aluminium -- Wet-peel test by floating-roller method 90.93 TC 61/SC 11
ISO 14678:2005
Adhesives -- Determination of resistance to flow (sagging) 90.93 TC 61/SC 11
ISO 14679:1997
Adhesives -- Measurement of adhesion characteristics by a three-point bending method 90.93 TC 61/SC 11
ISO 15107:1998
Adhesives -- Determination of cleavage strength of bonded joints 90.93 TC 61/SC 11
ISO 15108:1998
Adhesives -- Determination of strength of bonded joints using a bending-shear method 90.93 TC 61/SC 11
ISO 15109:1998
Adhesives -- Determination of the time to rupture of bonded joints under static load 90.93 TC 61/SC 11
ISO 15166-1:1998
Adhesives -- Methods of preparing bulk specimens -- Part 1: Two-part systems 90.93 TC 61/SC 11
ISO 15166-2:2000
Adhesives -- Methods of preparing bulk specimens -- Part 2: Elevated-temperature-curing one-part systems 90.93 TC 61/SC 11
ISO 15509:2001
Adhesives -- Determination of the bond strength of engineering-plastic joints 90.93 TC 61/SC 11
ISO 15605:2000
Adhesives -- Sampling 90.93 TC 61/SC 11
ISO 15908:2002
Adhesives for thermoplastic piping systems -- Test method for the determination of thermal stability of adhesives 90.93 TC 138/SC 5
ISO 17087:2006
Specifications for adhesives used for finger joints in non-structural lumber products 90.93 TC 61/SC 11
ISO 17194:2007
Structural adhesives -- A standard database of properties 60.60 TC 61/SC 11
ISO 17212:2004
Structural adhesives -- Guidelines for the surface preparation of metals and plastics prior to adhesive bonding 90.92 TC 61/SC 11
ISO/DIS 17212
Structural adhesives -- Guidelines for the surface preparation of metals and plastics prior to adhesive bonding 40.60 TC 61/SC 11
ISO 19212:2006
Adhesives -- Determination of temperature dependence of shear strength 90.93 TC 61/SC 11
ISO 21368:2005
Adhesives -- Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures 90.93 TC 61/SC 11
ISO/DIS 25179
Adhesives -- Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives 40.99 TC 61/SC 11
ISO 25217:2009
Adhesives -- Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens 60.60 TC 61/SC 2
ISO/FDIS 26842-1
Adhesives -- Test methods for the evaluation and selection of adhesives for indoor wood products -- Part 1: Resistance to delamination in non-severe environments 50.20 TC 61/SC 11
ISO/FDIS 26842-2
Adhesives -- Test methods for the evaluation and selection of adhesives for indoor wood products -- Part 2: Resistance to delamination in severe environments 50.20 TC 61/SC 11
ISO 29862:2007
Self adhesive tapes -- Determination of peel adhesion properties 60.60 TC 61/SC 11
ISO 29863:2007
Self adhesive tapes -- Measurement of static shear adhesion 60.60 TC 61/SC 11
ISO 29864:2007
Self adhesive tapes -- Measurement of breaking strength and elongation at break 60.60 TC 61/SC 11

83.200 Equipment for the rubber and plastics industries
Standard and/or project TC
ISO 483:2005
Plastics -- Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value 90.93 TC 61/SC 6
ISO 5893:2002
Rubber and plastics test equipment -- Tensile, flexural and compression types (constant rate of traverse) -- Specification 90.93 TC 45/SC 2
ISO 13802:1999
Plastics -- Verification of pendulum impact-testing machines -- Charpy, Izod and tensile impact-testing 90.93 TC 61/SC 2
ISO 13802:1999/Cor 1:2000
60.60 TC 61/SC 2




http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.

No comments:

Post a Comment