Wednesday, July 22, 2009

Lastest & Cheapest ISO Standards In PDF (56)

http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.

ISO 4167:2006
Polyolefin agricultural twines 90.60 TC 38
ISO 5080:1994
Sisal agricultural twines 90.20 TC 38
ISO/DIS 9554
Fibre ropes -- General specifications 40.20 TC 38
ISO 9554:2005
Fibre ropes -- General specifications 90.92 TC 38
ISO/FDIS 10325
Fibre ropes -- High modulus polyethylene -- 8-strand braided ropes, 12-strand braided ropes and


covered ropes 50.00 TC 38
ISO/FDIS 10547
Polyester fibre ropes -- Double braid construction 50.00 TC 38
ISO/FDIS 10554
Polyamide fibre ropes -- Double braid construction 50.00 TC 38
ISO/FDIS 10556
Fibre ropes of polyester/polyolefin dual fibres 50.00 TC 38
ISO/FDIS 10572
Mixed polyolefin fibre ropes 50.00 TC 38
ISO 18692:2007
Fibre ropes for offshore stationkeeping -- Polyester 60.60 TC 38

59.080.60 Textile floor coverings
Including carpets, rugs, floor mats, etc.
Non-textile floor coverings, see 97.150
Standard and/or project TC
ISO 1763:1986
Carpets -- Determination of number of tufts and/or loops per unit length and per unit area


90.93 TC 219
ISO 1765:1986
Machine-made textile floor coverings -- Determination of thickness 90.93 TC 219
ISO 1766:1999
Textile floor coverings -- Determination of thickness of pile above the substrate 90.20 TC 219
ISO 1957:2000
Machine-made textile floor coverings -- Selection and cutting of specimens for physical tests


90.93 TC 219
ISO 2094:1999
Textile floor coverings -- Determination of thickness loss under dynamic loading 90.20 TC 219
ISO 2424:2007
Textile floor coverings -- Vocabulary 60.60 TC 219
ISO 2549:1972
Textile floor coverings -- Hand-knotted carpets -- Determination of tuft leg length above the


woven ground 90.93 TC 219
ISO 2549:1972/Cor 1:1990
60.60 TC 219
ISO 2550:1972
Textile floor coverings -- Hand-made carpets -- Determination of types of knots 90.20 TC 219
ISO 2551:1981
Machine-made textile floor coverings -- Determination of dimensional changes due to the effects


of varied water and heat conditions 90.93 TC 219
ISO 3018:1974
Textile floor coverings -- Rectangular textile floor coverings -- Determination of dimensions


90.20 TC 219
ISO 3415:1986
Textile floor coverings -- Determination of thickness loss after brief, moderate static loading


90.93 TC 219
ISO 3416:1986
Textile floor coverings -- Determination of thickness loss after prolonged, heavy static


loading 90.93 TC 219
ISO/TR 4918:1990
Textile floor coverings -- Determination of wear -- Castor chair test 90.92 TC 219
ISO 4918
Resilient, textile and laminate floor coverings -- Castor chair test 60.00 TC 219
ISO 4919:1978
Textile floor coverings -- Determination of tuft withdrawal force 90.92 TC 219
ISO/CD 4919
Textile floor coverings -- Determination of tuft withdrawal force 30.60 TC 219
ISO 5086:1977
Textile floor coverings -- Hand-knotted carpets -- Sampling and selection of areas of test


90.93 TC 219
ISO 6347:2004
Textile floor coverings -- Consumer information 90.93 TC 219
ISO 6356:2000
Textile floor coverings -- Assessment of static electrical propensity -- Walking test 90.92 TC


219
ISO/CD 6356
Textile floor coverings -- Assessment of static electrical propensity -- Walking test 30.60 TC


219
ISO 6925:1982
Textile floor coverings -- Burning behaviour -- Tablet test at ambient temperature 90.93 TC 219
ISO 8543:1998
Textile floor coverings -- Methods for determination of mass 90.20 TC 219
ISO 9239-1:2002
Reaction to fire tests for floorings -- Part 1: Determination of the burning behaviour using a


radiant heat source 90.92 TC 92/SC 1
ISO/DIS 9239-1
Reaction to fire tests for floorings -- Part 1: Determination of the burning behaviour using a


radiant heat source 40.60 TC 92/SC 1
ISO 9239-2:2002
Reaction to fire tests for floorings -- Part 2: Determination of flame spread at a heat flux


level of 25 kW/m2 90.93 TC 92/SC 1
ISO 9405:2001
Textile floor coverings -- Assessment of changes in appearance 90.93 TC 219
ISO/CD 10361
Textile floor coverings -- Production of changes in appearance by means of Vettermann drum and


hexapod tumbler testers 30.00 TC 219
ISO 10361:2000
Textile floor coverings -- Production of changes in appearance by means of Vettermann drum and


hexapod tumbler testers 90.92 TC 219
ISO/DIS 10580
Resilient, textile and laminate floor coverings -- Test method for emissions of volatile


organic compounds (VOC) 40.60 TC 219
ISO/DIS 10833
Textile floor coverings -- Determination of resistance to damage at cut edges using the


modified Vettermann drum test 40.60 TC 219
ISO 10833:2001
Textile floor coverings -- Determination of resistance to damage at cut edges using the


modified Vettermann drum test 90.92 TC 219
ISO 10834:1992
Textile floor coverings -- Non-destructive measurement of pile thickness above the backing --


WRONZ gauge method 90.93 TC 219
ISO/FDIS 10874
Resilient, textile and laminate floor covering -- Classification 50.00 TC 219
ISO/DIS 10965
Textile floor coverings -- Determination of electrical resistance 40.00 TC 219
ISO 10965:1998
Textile floor coverings -- Determination of electrical resistance 90.92 TC 219
ISO 10965:1998/Cor 1:1999
60.60 TC 219
ISO 11377:1997
Textile floor coverings -- Floor soiling -- Test site set-up and soiling evaluation 90.93 TC


219
ISO 11378-1:2000
Textile floor coverings -- Laboratory soiling tests -- Part 1: Kappasoil test 90.93 TC 219
ISO 11378-2:2001
Textile floor coverings -- Laboratory soiling tests -- Part 2: Drum test 90.93 TC 219
ISO 11379:2009
Textile floor coverings -- Laboratory cleaning procedure using spray extraction 60.60 TC 219
ISO/PAS 11856:2003
Textile floor coverings -- Test methods for the determination of fibre bind 90.93 TC 219
ISO 11857:1999
Textile floor coverings -- Determination of resistance to delamination 90.20 TC 219
ISO 11858:1999
Textile floor coverings -- Determination of friability of attached foams 90.20 TC 219
ISO 11859:1999
Textile floor coverings -- Pure wool, hand-knotted pile carpets -- Specification 90.20 TC 219
ISO 11860:1999
Textile floor coverings -- Jute carpet backing fabric -- Specification 90.20 TC 219
ISO 11861:1999
Textile floor coverings -- Coir mats -- Types and specification 90.20 TC 219
ISO 12951:1999
Textile floor coverings -- Determination of mass loss using the Lisson test 90.92 TC 219
ISO/CD 12951
Textile floor coverings -- Determination of mass loss using the Lisson test 30.60 TC 219
ISO 13746:2000
Textile floor coverings -- Guidelines for installation and use on stairs 90.93 TC 219
ISO 13747:1999
Textile floor coverings -- Determination of size, squareness and straightness of edge of tiles


90.20 TC 219
ISO 13750:2000
Textile floor coverings -- Determination of resistance to staining by acid food colours 90.93


TC 219
ISO 17504:1999
Textile floor coverings -- Determination of wool fibre integrity using an abrasion machine


90.20 TC 219
ISO/PAS 17984:2001
Machine-made textile floor coverings -- Determination of dimensional changes after exposure to


heat and/or water 90.93 TC 219
ISO/DIS 21868
Textile floor coverings -- Guidance on maintenance and cleaning 40.00 TC 219

59.080.70 Geotextiles
Including geosynthetics
Standard and/or project TC
ISO 9862:2005
Geosynthetics -- Sampling and preparation of test specimens 90.93 TC 221
ISO 9863-1:2005
Geosynthetics -- Determination of thickness at specified pressures -- Part 1: Single layers


90.93 TC 221
ISO 9863-2:1996
Geotextiles and geotextile-related products -- Determination of thickness at specified


pressures -- Part 2: Procedure for determination of thickness of single layers of multilayer


products 90.93 TC 221
ISO 9864:2005
Geosynthetics -- Test method for the determination of mass per unit area of geotextiles and


geotextile-related products 90.93 TC 221
ISO 10318:2005
Geosynthetics -- Terms and definitions 90.92 TC 221
ISO 10319:2008
Geosynthetics -- Wide-width tensile test 60.60 TC 221
ISO 10320:1999
Geotextiles and geotextile-related products -- Identification on site 90.20 TC 221
ISO 10321:2008
Geosynthetics -- Tensile test for joints/seams by wide-width strip method 60.60 TC 221
ISO 10722:2007
Geosynthetics -- Index test procedure for the evaluation of mechanical damage under repeated


loading -- Damage caused by granular material 60.60 TC 221
ISO/CD 10769
Clay geosynthetic barriers (GBR-C) -- Determination of water absorption of bentonite 30.99 TC


221
ISO/AWI 10772
Test method for pore size determination under turbulent water flow conditions 20.00 TC 221
ISO/CD 10773
Geosynthetic clay barriers -- Determination of permeability tp gases 30.99 TC 221
ISO/CD 10776
Geotextiles and geotextile-related products -- Determination of water permeability


characteristics normal to the plane, under load 30.20 TC 221
ISO/DIS 11058
Geotextiles and geotextile-related products -- Determination of water permeability


characteristics normal to the plane, without load 40.99 TC 221
ISO 11058:1999
Geotextiles and geotextile-related products -- Determination of water permeability


characteristics normal to the plane, without load 90.92 TC 221
ISO 12236:2006
Geosynthetics -- Static puncture test (CBR test) 90.20 TC 221
ISO 12956:1999
Geotextiles and geotextile-related products -- Determination of the characteristic opening size


90.92 TC 221
ISO/DIS 12956
Geotextiles and geotextile-related products -- Determination of the characteristic opening size


40.99 TC 221
ISO 12957-1:2005
Geosynthetics -- Determination of friction characteristics -- Part 1: Direct shear test 90.93


TC 221
ISO 12957-2:2005
Geosynthetics -- Determination of friction characteristics -- Part 2: Inclined plane test 90.93


TC 221
ISO/DIS 12958
Geotextiles and geotextile-related products -- Determination of water flow capacity in their


plane 40.99 TC 221
ISO 12958:1999
Geotextiles and geotextile-related products -- Determination of water flow capacity in their


plane 90.92 TC 221
ISO/TR 12960:1998
Geotextiles and geotextile-related products -- Screening test method for determining the


resistance to liquids 90.93 TC 221
ISO 13426-1:2003
Geotextiles and geotextile-related products -- Strength of internal structural junctions --


Part 1: Geocells 90.93 TC 221
ISO 13426-2:2005
Geotextiles and geotextile-related products -- Strength of internal structural junctions --


Part 2: Geocomposites 90.93 TC 221
ISO 13427:1998
Geotextiles and geotextile-related products -- Abrasion damage simulation (sliding block test)


90.93 TC 221
ISO 13428:2005
Geosynthetics -- Determination of the protection efficiency of a geosynthetic against impact


damage 90.93 TC 221
ISO 13431:1999
Geotextiles and geotextile-related products -- Determination of tensile creep and creep rupture


behaviour 90.20 TC 221
ISO 13433:2006
Geosynthetics -- Dynamic perforation test (cone drop test) 90.20 TC 221
ISO/TS 13434:2008
Geosynthetics -- Guidelines for the assessment of durability 60.60 TC 221
ISO 13437:1998
Geotextiles and geotextile-related products -- Method for installing and extracting samples in


soil, and testing specimens in laboratory 90.93 TC 221
ISO 13438:2004
Geotextiles and geotextile-related products -- Screening test method for determining the


resistance to oxidation 90.93 TC 221
ISO/TS 19708:2007
Geosynthetics -- Procedure for simulating damage under interlocking-concrete-block pavement by


the roller compactor method 60.60 TC 221
ISO/TR 20432:2007
Guidelines for the determination of the long-term strength of geosynthetics for soil


reinforcement 60.60 TC 221
ISO/TR 20432:2007/Cor 1:2008
60.60 TC 221
ISO 25619-1:2008
Geosynthetics -- Determination of compression behaviour -- Part 1: Compressive creep properties


60.60 TC 221
ISO 25619-2:2008
Geosynthetics -- Determination of compression behaviour -- Part 2: Determination of short-term


compression behaviour 60.60 TC 221

59.080.99 Other products of the textile industry


59.100 Materials for the reinforcement of composites
ICS Field
59.100.01 Materials for the reinforcement of composites in general
Standard and/or project TC
ISO 1043-2:2000
Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials 90.92 TC


61/SC 1
ISO 1889:2009
Reinforcement yarns -- Determination of linear density 60.60 TC 61/SC 13
ISO 1890:2009
Reinforcement yarns -- Determination of twist 60.60 TC 61/SC 13
ISO 2113:1996
Reinforcement fibres -- Woven fabrics -- Basis for a specification 90.93 TC 61/SC 13
ISO 2113:1996/Cor 1:2003
60.60 TC 61/SC 13
ISO 3344:1997
Reinforcement products -- Determination of moisture content 90.93 TC 61/SC 13
ISO 4602:1997
Reinforcements -- Woven fabrics -- Determination of number of yarns per unit length of warp and


weft 90.92 TC 61/SC 13
ISO/DIS 4602
Reinforcements -- Woven fabrics -- Determination of number of yarns per unit length of warp and


weft 40.20 TC 61/SC 13
ISO 10122:1995
Reinforcement materials -- Tubular braided sleeves -- Basis for a specification 90.93 TC 61/SC


13
ISO 10371:1993
Reinforcement materials -- Braided tapes -- Basis for a specification 90.93 TC 61/SC 13
ISO 15100:2000
Plastics -- Reinforcement fibres -- Chopped strands -- Determination of bulk density 90.93 TC


61/SC 13

59.100.10 Textile glass materials
Standard and/or project TC
ISO 1887:1995
Textile glass -- Determination of combustible-matter content 90.93 TC 61/SC 13
ISO 1888:2006
Textile glass -- Staple fibres or filaments -- Determination of average diameter 90.60 TC 61/SC


13
ISO 2078:1993
Textile glass -- Yarns -- Designation 90.93 TC 61/SC 13
ISO 2558:1974
Textile glass chopped-strand mats for reinforcement of plastics -- Determination of time of


dissolution of the binder in styrene 90.60 TC 61/SC 13
ISO 2559:2000
Textile glass -- Mats (made from chopped or continuous strands) -- Designation and basis for


specifications 90.93 TC 61/SC 13
ISO 2797:1986
Textile glass -- Rovings -- Basis for a specification 90.93 TC 61/SC 13
ISO 3341:2000
Textile glass -- Yarns -- Determination of breaking force and breaking elongation 90.93 TC


61/SC 13
ISO 3342:1995
Textile glass -- Mats -- Determination of tensile breaking force 90.93 TC 61/SC 13
ISO 3343:1984
Textile glass -- Yarns -- Determination of twist balance index 90.60 TC 61/SC 13
ISO 3374:2000
Reinforcement products -- Mats and fabrics -- Determination of mass per unit area 90.93 TC


61/SC 13
ISO 3375:1975
Textile glass -- Determination of stiffness of rovings 90.92 TC 61/SC 13
ISO/FDIS 3375
Textile glass -- Determination of stiffness of rovings 50.00 TC 61/SC 13
ISO 3597-1:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of


roving-reinforced resin -- Part 1: General considerations and preparation of rods 90.93 TC


61/SC 13
ISO 3597-2:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of


roving-reinforced resin -- Part 2: Determination of flexural strength 90.93 TC 61/SC 13
ISO 3597-3:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of


roving-reinforced resin -- Part 3: Determination of compressive strength 90.93 TC 61/SC 13
ISO 3597-4:2003
Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of


roving-reinforced resin -- Part 4: Determination of apparent interlaminar shear strength 90.93


TC 61/SC 13
ISO 3598:1986
Textile glass -- Yarns -- Basis for a specification 90.60 TC 61/SC 13
ISO 3616:2001
Textile glass -- Chopped-strand and continuous-filament mats -- Determination of average


thickness, thickness under load and recovery after compression 90.93 TC 61/SC 13
ISO 4603:1993
Textile glass -- Woven fabrics -- Determination of thickness 90.93 TC 61/SC 13
ISO 4603:1993/DAmd 1
40.20 TC 61/SC 13
ISO 4604:1978
Textile glass -- Woven fabrics -- Determination of conventional flexural stiffness -- Fixed


angle flexometer method 90.93 TC 61/SC 13
ISO 4606:1995
Textile glass -- Woven fabric -- Determination of tensile breaking force and elongation at


break by the strip method 90.93 TC 61/SC 13
ISO 4900:1990
Textile glass -- Mats and fabrics -- Determination of contact mouldability 90.93 TC 61/SC 13
ISO 5025:1997
Reinforcement products -- Woven fabrics -- Determination of width and length 90.93 TC 61/SC 13
ISO 8516:1987
Textile glass -- Textured yarns -- Basis for a specification 90.60 TC 61/SC 13
ISO 9163:2005
Textile glass -- Rovings -- Manufacture of test specimens and determination of tensile strength


of impregnated rovings 90.93 TC 61/SC 13
ISO 15039:2003
Textile-glass rovings -- Determination of solubility of size 90.93 TC 61/SC 13

59.100.20 Carbon materials
Standard and/or project TC
ISO 10119:2002
Carbon fibre -- Determination of density 90.93 TC 61/SC 13
ISO 10548:2002
Carbon fibre -- Determination of size content 90.93 TC 61/SC 13
ISO 10548:2002/Cor 1:2008
60.60 TC 61/SC 13
ISO 10618:2004
Carbon fibre -- Determination of tensile properties of resin-impregnated yarn 90.93 TC 61/SC 13
ISO 11566:1996
Carbon fibre -- Determination of the tensile properties of single-filament specimens 90.93 TC


61/SC 13
ISO 11567:1995
Carbon fibre -- Determination of filament diameter and cross-sectional area 90.93 TC 61/SC 13
ISO 13002:1998
Carbon fibre -- Designation system for filament yarns 90.93 TC 61/SC 13

59.100.30 Aramide materials
59.100.99 Other materials for the reinforcement of composites

59.120 Textile machinery
59.120.01 Textile machinery in general
Standard and/or project TC
ISO 5232:1998
Graphical symbols for textile machinery 90.60 TC 72/SC 9
ISO 9902-1:2001
Textile machinery -- Noise test code -- Part 1: Common requirements 90.93 TC 72/SC 8
ISO 9902-1:2001/Amd 1:2009
60.60 TC 72/SC 8
ISO 11111-1:2009
Textile machinery -- Safety requirements -- Part 1: Common requirements 60.60 TC 72/SC 8
ISO 11659-1:1995
Textile machinery and accessories -- Machine parts in contact with textile processing oils --


Part 1: Determination of anticorrosive effect upon steel 90.93 TC 72/SC 4
ISO 11659-2:2004
Textile machinery and accessories -- Machine parts in contact with textile processing oils --


Part 2: Determination of the impact on polymeric materials 90.60 TC 72/SC 4
ISO 11659-3:2004
Textile machinery and accessories -- Machine parts in contact with textile processing oils --


Part 3: Determination of the impact on lacquers 90.60 TC 72/SC 4

59.120.10 Spinning, twisting and texturing machines
Including machines and equipment for manufacturing man-made filaments and fibres and for


preparing fibres for spinning
Standard and/or project TC
ISO 92:1976
Textile machinery and accessories -- Spinning machinery -- Definition of side (left or right)


90.93 TC 72/SC 1
ISO 93-1:2006
Textile machinery and accessories -- Cylindrical sliver cans -- Part 1: Main dimensions 90.60


TC 72/SC 1
ISO 93-2:2006
Textile machinery and accessories -- Cylindrical sliver cans -- Part 2: Spring bottoms 90.60 TC


72/SC 1
ISO 94:1982
Textile machinery and accessories -- Spindle gauges for ring-spinning and ring-doubling frames


90.93 TC 72/SC 1
ISO 96-1:2009
Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting


frames -- Part 1: Flange rings T and SF and their travellers 60.60 TC 72/SC 1
ISO 96-2:2009
Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting


frames -- Part 2: HZ- and J-rings and their travellers 60.60 TC 72/SC 1
ISO 98:2001
Textile machinery and accessories -- Spinning preparatory and spinning machinery -- Main


dimensions of coverings for top rollers 90.93 TC 72/SC 1
ISO 342:1983
Textile machinery and accessories -- Worsted and woollen cards -- Width of cylinder and width


on the wire 90.20 TC 72/SC 1
ISO 368:2006
Spinning preparatory, spinning and doubling (twisting) machinery -- Tubes for ring-spinning,


doubling and twisting spindles, taper 1:38 and 1:64 90.60 TC 72/SC 1
ISO 1809:1977
Textile machinery and accessories -- Types of formers for yarn packages -- Nomenclature 90.93


TC 72/SC 1
ISO 2187:1990
Spinning preparatory machinery, spinning and doubling (twisting) machinery -- List of


equivalent terms 90.93 TC 72/SC 1
ISO 2205:1975
Textile machinery and accessories -- Drafting arrangements for spinning machines -- Terminology


90.93 TC 72/SC 1
ISO 2572:1982
Textile machinery and accessories -- Card gauges 90.93 TC 72/SC 1
ISO 4105:1978
Textile machinery and accessories -- Wires for flexible card clothings 90.20 TC 72/SC 1
ISO 5233:1978
Textile machinery and accessories -- Bottom fluted rollers for drafting systems 90.20 TC 72/SC


1
ISO 5234:2005
Textile machinery and accessories -- Metallic card clothing -- Definitions of dimensions, types


and mounting 90.60 TC 72/SC 1
ISO 6170:1999
Spinning machinery -- Condenser rubbers for cards 90.20 TC 72/SC 1
ISO 6173:1982
Open-end spinning machines -- Vocabulary 90.93 TC 72/SC 1
ISO 8114:1990
Textile machinery and accessories -- Spindles for ring-spinning and doubling machines -- List


of equivalent terms 90.93 TC 72/SC 1
ISO 9902-2:2001
Textile machinery -- Noise test code -- Part 2: Spinning preparatory and spinning machinery


90.93 TC 72/SC 8
ISO 9902-2:2001/Amd 1:2009
60.60 TC 72/SC 8
ISO 9902-4:2001
Textile machinery -- Noise test code -- Part 4: Yarn processing, cordage and rope manufacturing


machinery 90.93 TC 72/SC 8
ISO 9902-4:2001/Amd 1:2009
60.60 TC 72/SC 8
ISO 9903-1:2003
Textile machinery and accessories -- Main dimensions for section wires for metallic card


clothing -- Part 1: Foot without interlocking or interchaining 90.93 TC 72/SC 1
ISO 9903-2:2003
Textile machinery and accessories -- Main dimensions for section wires for metallic card


clothing -- Part 2: Foot with interchaining 90.93 TC 72/SC 1
ISO 9904:2000
Textile machinery and accessories -- Steel pins for spinning preparatory and spinning machinery


90.93 TC 72/SC 1
ISO 9947:2005
Textile machinery and accessories -- Two-for-one twisters -- Vocabulary 90.60 TC 72/SC 1
ISO 11111-2:2005
Textile machinery -- Safety requirements -- Part 2: Spinning preparatory and spinning machines


90.60 TC 72/SC 8
ISO 11111-2:2005/Amd 1:2009
60.60 TC 72/SC 8
ISO 11111-4:2005
Textile machinery -- Safety requirements -- Part 4: Yarn processing, cordage and rope


manufacturing machinery 90.60 TC 72/SC 8
ISO 11111-4:2005/Amd 1:2009
60.60 TC 72/SC 8
ISO 13754:1999
Textile machinery and accessories -- Hexagon nuts and slotted nuts for spinning and twisting


spindles 90.20 TC 72/SC 1
ISO 16853:2003
Textile machinery -- Sliver cans, rectangular -- Main dimensions and tolerances 90.92 TC 72/SC


1
ISO/DIS 16853
Textile machinery -- Sliver cans, rectangular -- Main dimensions and tolerances 40.60 TC 72/SC


1
ISO 16854:2004
Textile machinery -- Ring twisting machines -- Vocabulary 90.93 TC 72/SC 1
ISO 16875:2004
Textile machinery -- Ring spinning machines for cotton spinning -- Vocabulary 90.93 TC 72/SC 1
ISO 20725:2004
Textile machinery -- Condensers for cotton spinning -- Vocabulary and principles of


construction 90.93 TC 72/SC 1
ISO 20726:2004
Textile machinery -- Hopper feeders for cotton spinning -- Vocabulary and principles of


construction 90.93 TC 72/SC 1
ISO 20727:2004
Textile machinery -- Mixing bale openers for cotton spinning -- Vocabulary and principles of


construction 90.93 TC 72/SC 1
ISO 21485:2006
Textile machinery -- Draw frame for cotton spinning -- Vocabulary and principles of


construction 60.60 TC 72/SC 1
ISO 26243:2007
Cards for staple fibres spinning -- Vocabulary and principles of construction 60.60 TC 72/SC 1
ISO 28239:2008
Textile machinery -- Opener and cleaner for staple fibres preparation -- Vocabulary and


principles of construction 60.60 TC 72/SC 1

59.120.20 Winding machines and equipment
Including machines and equipment for reeling, balling, warping, sizing, beaming, etc. of yarns
Standard and/or project TC
ISO 108:1976
Textile machinery and accessories -- Weaving looms -- Definition of left and right sides 90.60


TC 72/SC 3
ISO 109:1982
Textile machinery -- Working widths of weaving machines 90.60 TC 72/SC 3
ISO 142:1976
Textile machinery and accessories -- Weaving preparatory machines -- Definition of left and


right sides 90.60 TC 72/SC 3
ISO 363-1:2006
Textile machinery and accessories -- Flat steel healds with closed end loops -- Part 1:


Dimensions of healds manufactured of rolled steel wire 90.60 TC 72/SC 3
ISO 363-2:2006
Textile machinery and accessories -- Flat steel healds with closed end loops -- Part 2:


Dimensions of healds manufactured of hardened strip steel 90.60 TC 72/SC 3
ISO 364:1983
Textile machinery and accessories -- Twin wire healds for weaving machines with heald frames


90.93 TC 72/SC 3
ISO 365:1982
Textile machinery and accessories -- Twin wire healds with inset mail for Jacquard weaving


90.60 TC 72/SC 3
ISO 366-1:1988
Textile machinery and accessories -- Reeds -- Part 1: Pitch bound reeds -- Dimensions 90.93 TC


72/SC 3
ISO 366-2:2009
Textile machinery and accessories -- Reeds -- Part 2: Dimensions and designation of metal reeds


with plate baulk 60.60 TC 72/SC 3
ISO 366-3:2009
Textile machinery and accessories -- Reeds -- Part 3: Dimensions and designation of metal reeds


with double-spring baulk 60.60 TC 72/SC 3
ISO 366-4:2005
Textile machinery and accessories -- Reeds -- Part 4: Dimensions and designation of plastic-


bound metal reeds 90.60 TC 72/SC 3
ISO 366-5:2006
Textile machinery and accessories -- Reeds -- Part 5: Dimensions and designation of profile


capsules 90.60 TC 72/SC 3
ISO 441:1997
Textile machinery and accessories -- Drop wires for warp stop motions for weaving machines


without automatic drawing-in 90.60 TC 72/SC 3
ISO 570:1982
Textile machinery and accessories -- Heald carrying rods for healds with closed "O"-shaped end


loops 90.60 TC 72/SC 3
ISO 572:1976
Textile machinery and accessories -- Shuttles for pirn changing automatic looms -- Dimensions


90.60 TC 72/SC 3
ISO 576:1976
Textile machinery and accessories -- Paper patterns for dobbies -- Dimensions 90.93 TC 72/SC 3
ISO 1150:1997
Textile machinery and accessories -- Drop wires for warp stop motions for weaving machines with


automatic drawing-in 90.60 TC 72/SC 3
ISO 1586:1977
Textile machinery and accessories -- Shuttles -- Terms and designation in relation to the


position of the shuttle eye 90.60 TC 72/SC 3
ISO 1865:1977
Textile machinery and accessories -- Serrated bars for mechanical warp stop motions --


Designations of dimensions, and dimensions of cross-section 90.60 TC 72/SC 3
ISO 2012:1976
Textile machinery and accessories -- Cone sectional warping machines -- Maximum usable width


90.60 TC 72/SC 3
ISO 2544:1975
Textile machinery and accessories -- Warping machinery -- Preparation of warp for weaving --


Vocabulary 90.93 TC 72/SC 3
ISO 2748:1983
Textile machinery and accessories -- Lingoes for Jacquard weaving 90.93 TC 72/SC 3
ISO 5243:2004
Textile machinery and accessories -- Numbering of heald frames and drop wire bars in a loom


90.60 TC 72/SC 3
ISO 5247-1:2004
Textile machinery and accessories -- Weaving machines -- Part 1: Vocabulary and classification


90.60 TC 72/SC 3
ISO 5247-1:2004/Cor 1:2006
60.60 TC 72/SC 3
ISO 5247-2:1989
Textile machinery and accessories -- Weaving machines -- Part 2: Accessories -- Vocabulary


90.93 TC 72/SC 3
ISO 5247-3:1993
Textile machinery and accessories -- Weaving machines -- Part 3: Parts of the machine --


Vocabulary 90.60 TC 72/SC 3
ISO 6176:1994
Textile machinery -- Warp sizing machines -- Maximum usable width 90.93 TC 72/SC 3
ISO 6177:1986
Textile machinery -- Cloth rollers -- Terminology and main dimensions 90.60 TC 72/SC 3
ISO 7506:1984
Textile machinery and accessories -- Numbering of harnesses for drawing-in on Jacquard machines


90.60 TC 72/SC 3
ISO 8118-1:2006
Textile machinery -- Weaving machine temples -- Part 1: Temple cylinders 90.60 TC 72/SC 3
ISO 8118-2:2006
Textile machinery -- Weaving machine temples -- Part 2: Full-width temples 90.60 TC 72/SC 3
ISO 9473-1:2006
Textile machinery and accessories -- Strip steel for dents of reeds -- Part 1: Cold rolled


strip steel 90.60 TC 72/SC 3
ISO 9473-2:2006
Textile machinery and accessories -- Strip steel for dents of reeds -- Part 2: Hardened strip


steel 90.60 TC 72/SC 3
ISO 9902-5:2001
Textile machinery -- Noise test code -- Part 5: Weaving and knitting preparatory machinery


90.93 TC 72/SC 8
ISO 9902-5:2001/Amd 1:2009
60.60 TC 72/SC 8
ISO 9902-6:2001
Textile machinery -- Noise test code -- Part 6: Fabric manufacturing machinery 90.93 TC 72/SC 8
ISO 9902-6:2001/Amd 1:2009
60.60 TC 72/SC 8
ISO 10787-1:1994
Textile machinery and accessories -- Heald frames -- Part 1: Heald-carrying rod fixed to the


frame stave by rod support -- Coordinated dimensions 90.93 TC 72/SC 3
ISO 10787-2:1994
Textile machinery and accessories -- Heald frames -- Part 2: Heald-carrying rod fixed directly


on the frame stave -- Coordinated dimensions 90.93 TC 72/SC 3
ISO 10787-3:1994
Textile machinery and accessories -- Heald frames -- Part 3: Guides for heald frames 90.93 TC


72/SC 3
ISO 11111-5:2005
Textile machinery -- Safety requirements -- Part 5: Preparatory machinery to weaving and


knitting 90.60 TC 72/SC 8
ISO 11111-5:2005/Amd 1:2009
60.60 TC 72/SC 8
ISO 11111-6:2005
Textile machinery -- Safety requirements -- Part 6: Fabric manufacturing machinery 90.60 TC


72/SC 8
ISO 11111-6:2005/Amd 1:2009
60.60 TC 72/SC 8
ISO 11677-1:1994
Textile machinery and accessories -- Main dimensions of flat steel healds with open end loops


-- Part 1: C-shaped end loops 90.93 TC 72/SC 3
ISO 11677-2:1994
Textile machinery and accessories -- Main dimensions of flat steel healds with open end loops


-- Part 2: J-shaped end loops 90.93 TC 72/SC 3
ISO 11677-3:1995
Textile machinery and accessories -- Main dimensions of open end loop flat steel healds and


their corresponding heald-carrying rods -- Part 3: Carrying rods for healds with C- and J-


shaped end loops 90.93 TC 72/SC 3
ISO 13552:1994
Textile machinery and accessories -- Cloth rollers -- Specification for connections for


automation of roller changing 90.93 TC 72/SC 3
ISO 14500:2003
Textile machinery and accessories -- Harnesses for Jacquard weaving machines -- Vocabulary


90.60 TC 72/SC 3
ISO 15228:2005
Textile machinery and accessories -- Profile reeds for air jet weaving machines -- Dimensions


90.60 TC 72/SC 3

59.120.30 Looms. Weaving machines
Standard and/or project TC
ISO 108:1976
Textile machinery and accessories -- Weaving looms -- Definition of left and right sides 90.60


TC 72/SC 3
ISO 109:1982
Textile machinery -- Working widths of weaving machines 90.60 TC 72/SC 3
ISO 142:1976
Textile machinery and accessories -- Weaving preparatory machines -- Definition of left and


right sides 90.60 TC 72/SC 3
ISO 363-1:2006
Textile machinery and accessories -- Flat steel healds with closed end loops -- Part 1:


Dimensions of healds manufactured of rolled steel wire 90.60 TC 72/SC 3
ISO 363-2:2006
Textile machinery and accessories -- Flat steel healds with closed end loops -- Part 2:


Dimensions of healds manufactured of hardened strip steel 90.60 TC 72/SC 3
ISO 364:1983
Textile machinery and accessories -- Twin wire healds for weaving machines with heald frames


90.93 TC 72/SC 3
ISO 365:1982
Textile machinery and accessories -- Twin wire healds with inset mail for Jacquard weaving


90.60 TC 72/SC 3
ISO 366-1:1988
Textile machinery and accessories -- Reeds -- Part 1: Pitch bound reeds -- Dimensions 90.93 TC


72/SC 3
ISO 366-2:2009
Textile machinery and accessories -- Reeds -- Part 2: Dimensions and designation of metal reeds


with plate baulk 60.60 TC 72/SC 3
ISO 366-3:2009
Textile machinery and accessories -- Reeds -- Part 3: Dimensions and designation of metal reeds


with double-spring baulk 60.60 TC 72/SC 3
ISO 366-4:2005
Textile machinery and accessories -- Reeds -- Part 4: Dimensions and designation of plastic-


bound metal reeds 90.60 TC 72/SC 3
ISO 366-5:2006
Textile machinery and accessories -- Reeds -- Part 5: Dimensions and designation of profile


capsules 90.60 TC 72/SC 3
ISO 441:1997
Textile machinery and accessories -- Drop wires for warp stop motions for weaving machines


without automatic drawing-in 90.60 TC 72/SC 3
ISO 570:1982
Textile machinery and accessories -- Heald carrying rods for healds with closed "O"-shaped end


loops 90.60 TC 72/SC 3
ISO 572:1976
Textile machinery and accessories -- Shuttles for pirn changing automatic looms -- Dimensions


90.60 TC 72/SC 3
ISO 576:1976
Textile machinery and accessories -- Paper patterns for dobbies -- Dimensions 90.93 TC 72/SC 3
ISO 1150:1997
Textile machinery and accessories -- Drop wires for warp stop motions for weaving machines with


automatic drawing-in 90.60 TC 72/SC 3
ISO 1586:1977
Textile machinery and accessories -- Shuttles -- Terms and designation in relation to the


position of the shuttle eye 90.60 TC 72/SC 3
ISO 1865:1977
Textile machinery and accessories -- Serrated bars for mechanical warp stop motions --


Designations of dimensions, and dimensions of cross-section 90.60 TC 72/SC 3
ISO 2012:1976
Textile machinery and accessories -- Cone sectional warping machines -- Maximum usable width


90.60 TC 72/SC 3
ISO 2544:1975
Textile machinery and accessories -- Warping machinery -- Preparation of warp for weaving --


Vocabulary 90.93 TC 72/SC 3
ISO 2748:1983
Textile machinery and accessories -- Lingoes for Jacquard weaving 90.93 TC 72/SC 3
ISO 5243:2004
Textile machinery and accessories -- Numbering of heald frames and drop wire bars in a loom


90.60 TC 72/SC 3
ISO 5247-1:2004
Textile machinery and accessories -- Weaving machines -- Part 1: Vocabulary and classification


90.60 TC 72/SC 3
ISO 5247-1:2004/Cor 1:2006
60.60 TC 72/SC 3
ISO 5247-2:1989
Textile machinery and accessories -- Weaving machines -- Part 2: Accessories -- Vocabulary


90.93 TC 72/SC 3
ISO 5247-3:1993
Textile machinery and accessories -- Weaving machines -- Part 3: Parts of the machine --


Vocabulary 90.60 TC 72/SC 3
ISO 6176:1994
Textile machinery -- Warp sizing machines -- Maximum usable width 90.93 TC 72/SC 3
ISO 6177:1986
Textile machinery -- Cloth rollers -- Terminology and main dimensions 90.60 TC 72/SC 3
ISO 7506:1984
Textile machinery and accessories -- Numbering of harnesses for drawing-in on Jacquard machines


90.60 TC 72/SC 3
ISO 8118-1:2006
Textile machinery -- Weaving machine temples -- Part 1: Temple cylinders 90.60 TC 72/SC 3
ISO 8118-2:2006
Textile machinery -- Weaving machine temples -- Part 2: Full-width temples 90.60 TC 72/SC 3
ISO 9473-1:2006
Textile machinery and accessories -- Strip steel for dents of reeds -- Part 1: Cold rolled


strip steel 90.60 TC 72/SC 3
ISO 9473-2:2006
Textile machinery and accessories -- Strip steel for dents of reeds -- Part 2: Hardened strip


steel 90.60 TC 72/SC 3
ISO 9902-5:2001
Textile machinery -- Noise test code -- Part 5: Weaving and knitting preparatory machinery


90.93 TC 72/SC 8
ISO 9902-5:2001/Amd 1:2009
60.60 TC 72/SC 8
ISO 9902-6:2001
Textile machinery -- Noise test code -- Part 6: Fabric manufacturing machinery 90.93 TC 72/SC 8
ISO 9902-6:2001/Amd 1:2009
60.60 TC 72/SC 8
ISO 10787-1:1994
Textile machinery and accessories -- Heald frames -- Part 1: Heald-carrying rod fixed to the


frame stave by rod support -- Coordinated dimensions 90.93 TC 72/SC 3
ISO 10787-2:1994
Textile machinery and accessories -- Heald frames -- Part 2: Heald-carrying rod fixed directly


on the frame stave -- Coordinated dimensions 90.93 TC 72/SC 3
ISO 10787-3:1994
Textile machinery and accessories -- Heald frames -- Part 3: Guides for heald frames 90.93 TC


72/SC 3
ISO 11111-5:2005
Textile machinery -- Safety requirements -- Part 5: Preparatory machinery to weaving and


knitting 90.60 TC 72/SC 8
ISO 11111-5:2005/Amd 1:2009
60.60 TC 72/SC 8
ISO 11111-6:2005
Textile machinery -- Safety requirements -- Part 6: Fabric manufacturing machinery 90.60 TC


72/SC 8
ISO 11111-6:2005/Amd 1:2009
60.60 TC 72/SC 8
ISO 11677-1:1994
Textile machinery and accessories -- Main dimensions of flat steel healds with open end loops


-- Part 1: C-shaped end loops 90.93 TC 72/SC 3
ISO 11677-2:1994
Textile machinery and accessories -- Main dimensions of flat steel healds with open end loops


-- Part 2: J-shaped end loops 90.93 TC 72/SC 3
ISO 11677-3:1995
Textile machinery and accessories -- Main dimensions of open end loop flat steel healds and


their corresponding heald-carrying rods -- Part 3: Carrying rods for healds with C- and J-


shaped end loops 90.93 TC 72/SC 3
ISO 13552:1994
Textile machinery and accessories -- Cloth rollers -- Specification for connections for


automation of roller changing 90.93 TC 72/SC 3
ISO 14500:2003
Textile machinery and accessories -- Harnesses for Jacquard weaving machines -- Vocabulary


90.60 TC 72/SC 3
ISO 15228:2005
Textile machinery and accessories -- Profile reeds for air jet weaving machines -- Dimensions


90.60 TC 72/SC 3

59.120.40 Knitting machines
Including household knitting machines
59.120.50 Dyeing and finishing equipment
Laundry appliances, see 97.060
Standard and/or project TC
ISO 1036:1984
Textile machinery -- Dyeing and finishing machines -- Definition of left and right sides 90.93


TC 72/SC 4
ISO 1505:1993
Textile machinery -- Widths relating to dyeing and finishing machines -- Definitions and range


of nominal widths 90.60 TC 72/SC 4
ISO 1506:1982
Textile machinery -- Dyeing, finishing and allied machinery -- Classification and nomenclature


90.93 TC 72/SC 4
ISO 5248:2003
Textile machinery and accessories -- Dyeing and finishing machinery -- Vocabulary for ancillary


devices 90.60 TC 72/SC 4
ISO 5249:1988
Textile machinery and accessories -- Guide rollers for dyeing and finishing machinery -- Main


dimensions 90.93 TC 72/SC 4
ISO 5250:2003
Textile machinery and accessories -- Dyeing and finishing machinery -- Terms for tentering and


heat-treatment machinery 90.60 TC 72/SC 4
ISO 6178:1983
Centrifuges -- Construction and safety rules -- Method for the calculation of the tangential


stress in the shell of a cylindrical centrifuge rotor 90.93 TC 72/SC 4
ISO 9902-7:2001
Textile machinery -- Noise test code -- Part 7: Dyeing and finishing machinery 90.93 TC 72/SC 8
ISO 9902-7:2001/Amd 1:2009
60.60 TC 72/SC 8
ISO 10457:2002
Textile machinery -- Dyeing and finishing machines -- Nominal speeds 90.60 TC 72/SC 4
ISO 10459:1992
Textile machinery -- Dyeing and finishing machines -- Designation of operating ranges of


component parts 90.93 TC 72/SC 4
ISO 11111-7:2005
Textile machinery -- Safety requirements -- Part 7: Dyeing and finishing machinery 90.60 TC


72/SC 8
ISO 11111-7:2005/Amd 1:2009
60.60 TC 72/SC 8

59.120.99 Other textile machinery
Standard and/or project TC
ISO 9902-3:2001
Textile machinery -- Noise test code -- Part 3: Nonwoven machinery 90.93 TC 72/SC 8
ISO 9902-3:2001/Amd 1:2009
60.60 TC 72/SC 8
ISO 11111-3:2005
Textile machinery -- Safety requirements -- Part 3: Nonwoven machinery 90.60 TC 72/SC 8
ISO 11111-3:2005/Amd 1:2009
60.60 TC 72/SC 8
ISO 11111-6:2005
Textile machinery -- Safety requirements -- Part 6: Fabric manufacturing machinery 90.60 TC


72/SC 8
ISO 11111-6:2005/Amd 1:2009
60.60 TC 72/SC 8

59.140 Leather technology
Including fur and imitation leather
Footwear, see 61.060
Sewing machines and machines for footwear production, see 61.080
59.140.01 Leather technology in general
59.140.10 Processes and auxiliary materials
59.140.20 Raw skins, hides and pelts
Standard and/or project TC
ISO 2820:1974
Leather -- Raw hides of cattle and horses -- Method of trim 90.93 TC 120/SC 1
ISO 2820:1974/Amd 1:1996
60.60 TC 120/SC 1
ISO 2821:1974
Leather -- Raw hides of cattle and horses -- Preservation by stack salting 90.93 TC 120/SC 1
ISO 2821:1974/Amd 1:1996
60.60 TC 120/SC 1
ISO 2822-1:1998
Raw cattle hides and calf skins -- Part 1: Descriptions of defects 90.93 TC 120/SC 1
ISO 4683-1:1998
Raw sheep skins -- Part 1: Descriptions of defects 90.93 TC 120/SC 1
ISO 4683-2:1999
Raw sheep skins -- Part 2: Designation and presentation 90.93 TC 120/SC 1
ISO 7482-1:1998
Raw goat skins -- Part 1: Descriptions of defects 90.93 TC 120/SC 1
ISO 7482-2:1999
Raw goat skins -- Part 2: Guidelines for grading on the basis of mass and size 90.93 TC 120/SC


1
ISO 7482-3:2005
Raw goat skins -- Part 3: Guidelines for grading on the basis of defects 90.60 TC 120/SC 1
ISO/WD 11396
Crocodile skins -- Description of defects, grading on the basis of defects and size 20.20 TC


120/SC 1
ISO/WD 11398
Raw ostrich skins -- Description of defects, preservation and grading 20.20 TC 120/SC 1
ISO/FDIS 28499-1
Buffalo hides and buffalo calf skins -- Part 1: Description of defects 50.20 TC 120/SC 1
ISO/FDIS 28499-2
Buffalo hides and buffalo calf skins -- Part 2: Grading on the basis of mass and size 50.20 TC


120/SC 1
ISO/FDIS 28499-3
Buffalo hides and buffalo calf skins -- Part 3: Grading on the basis of defects 50.20 TC 120/SC


1

59.140.30 Leather and furs
Standard and/or project TC
ISO 2417:2002
Leather -- Physical and mechanical tests -- Determination of the static absorption of water


90.93 IULTCS
ISO 2418:2002
Leather -- Chemical, physical and mechanical and fastness tests -- Sampling location 90.93


IULTCS
ISO 2419:2006
Leather -- Physical and mechanical tests -- Sample preparation and conditioning 90.60 IULTCS
ISO 2420:2002
Leather -- Physical and mechanical tests -- Determination of apparent density 90.93 IULTCS
ISO 2588:1985
Leather -- Sampling -- Number of items for a gross sample 95.60 IULTCS
ISO 2589:2002
Leather -- Physical and mechanical tests -- Determination of thickness 90.93 IULTCS
ISO/CD 3376
Leather -- Physical and mechanical tests -- Determination of tensile strength and percentage


extension 30.99 IULTCS
ISO 3376:2002
Leather -- Physical and mechanical tests -- Determination of tensile strength and percentage


extension 90.92 IULTCS
ISO/NP 3377-1
Leather -- Physical and mechanical tests -- Determination of tear load -- Part 1: Single edge


tear 10.99 IULTCS
ISO 3377-1:2002
Leather -- Physical and mechanical tests -- Determination of tear load -- Part 1: Single edge


tear 90.92 IULTCS
ISO 3377-2:2002
Leather -- Physical and mechanical tests -- Determination of tear load -- Part 2: Double edge


tear 90.93 IULTCS
ISO 3378:2002
Leather -- Physical and mechanical tests -- Determination of resistance to grain cracking and


grain crack index 90.93 IULTCS
ISO 3379:1976
Leather -- Determination of distension and strength of grain -- Ball burst test 90.93 IULTCS
ISO 3380:2002
Leather -- Physical and mechanical tests -- Determination of shrinkage temperature up to 100


degrees C 90.93 IULTCS
ISO 4044:2008
Leather -- Chemical tests -- Preparation of chemical test samples 60.60 IULTCS
ISO 4045:2008
Leather -- Chemical tests -- Determination of pH 60.60 IULTCS
ISO 4047:1977
Leather -- Determination of sulphated total ash and sulphated water-insoluble ash 90.93 IULTCS
ISO 4048:2008
Leather -- Chemical tests -- Determination of matter soluble in dichloromethane and free fatty


acid content 60.60 IULTCS
ISO 4098:2006
Leather -- Chemical tests -- Determination of water-soluble matter, water-soluble inorganic


matter and water-soluble organic matter 90.60 IULTCS
ISO 4684:2005
Leather -- Chemical tests -- Determination of volatile matter 90.60 IULTCS
ISO 5397:1984
Leather -- Determination of nitrogen content and "hide substance" -- Titrimetric method 90.93


IULTCS
ISO 5398-1:2007
Leather -- Chemical determination of chromic oxide content -- Part 1: Quantification by


titration 60.60 IULTCS
ISO 5398-2:2009
Leather -- Chemical determination of chromic oxide content -- Part 2: Quantification by


colorimetric determination 60.60 IULTCS
ISO 5398-3:2007
Leather -- Chemical determination of chromic oxide content -- Part 3: Quantification by atomic


absorption spectrometry 60.60 IULTCS
ISO 5398-4:2007
Leather -- Chemical determination of chromic oxide content -- Part 4: Quantification by


inductively coupled plasma - optical emission spectrometer (ICP-OES) 60.60 IULTCS
ISO 5399:1984
Leather -- Determination of water-soluble magnesium salts -- EDTA titrimetric method 95.20


IULTCS
ISO 5400:1984
Leather -- Determination of total silicon content -- Reduced molybdosilicate spectrometric


method 95.60 IULTCS
ISO 5402:2002
Leather -- Physical and mechanical tests -- Determination of flex resistance by flexometer


method 90.92 IULTCS
ISO/CD 5402-1
Leather -- Determination of flex resistance -- Part 1: Flexometer method 30.99 IULTCS
ISO/NP 5402-2
Leather -- Determination of flex resistance -- Part 2: Vamp flex method 10.99 IULTCS
ISO 5403:2002
Leather -- Physical and mechanical tests -- Determination of water resistance of flexible


leather 90.92 IULTCS
ISO/CD 5403-1
Leather -- Determination of water resistance of flexible leather -- Part 1: Linear compression


method 30.99 IULTCS
ISO/NP 5403-2
Leather -- Determination of water resistance of flexible leather -- Part 2: Angular flexing


method 10.99 IULTCS
ISO 5404:2002
Leather -- Physical and mechanical tests -- Determination of the water resistance of heavy


leathers 90.92 IULTCS
ISO/CD 5404
Leather -- Physical and mechanical tests -- Determination of the water resistance of heavy


leathers 30.99 IULTCS
ISO 5431:1999
Leather -- Wet blue goat skins -- Specification 90.93 TC 120/SC 2
ISO 5432:1999
Leather -- Wet blue sheep skins -- Specification 90.93 TC 120/SC 2
ISO 5433:1999
Leather -- Bovine wet blue -- Specification 90.93 TC 120/SC 2
ISO/NP 11640
Leather -- Tests for colour fastness -- Colour fastness to cycles of to-and-fro rubbing 10.99


IULTCS
ISO 11640:1993
Leather -- Tests for colour fastness -- Colour fastness to cycles of to-and-fro rubbing 90.92


IULTCS
ISO/NP 11641
Leather -- Tests for colour fastness -- Colour fastness to perspiration 10.99 IULTCS
ISO 11641:1993
Leather -- Tests for colour fastness -- Colour fastness to perspiration 90.92 IULTCS
ISO 11642:1993
Leather -- Tests for colour fastness -- Colour fastness to water 90.92 IULTCS
ISO/NP 11642
Leather -- Tests for colour fastness -- Colour fastness to water 10.99 IULTCS
ISO 11643:2009
Leather -- Tests for colour fastness -- Colour fastness of small samples to solvents 60.60


IULTCS
ISO 11644:2009
Leather -- Test for adhesion of finish 60.60 IULTCS
ISO 11646:1993
Leather -- Measurement of area 90.93 IULTCS
ISO/CD 13364
Leather -- Chemical tests -- Determination of free and ethoxylated nonylphenols in leather


30.99 IULTCS
ISO/NP 13365
Leather -- Chemical tests -- Determination of preservative content (TCMTB) in leather 10.99


IULTCS
ISO/NP 13382
Leather -- Chemical tests -- Determination of chlorinated hydrocarbons in leather 10.99 IULTCS
ISO/NP 14087
Leather -- Physical and mechanical tests -- Determination of flexural properties 10.99 IULTCS
ISO/NP 14088
Leather -- Chemical test -- Determination of tanning content in vegetable extracts 10.99 IULTCS
ISO/NP 14089
Leather -- Chemical test -- Determination of organotin compounds in leather 10.99 IULTCS
ISO 14268:2002
Leather -- Physical and mechanical tests -- Determination of water vapour permeability 90.92


IULTCS
ISO/CD 14268
Leather -- Physical and mechanical tests -- Determination of water vapour permeability 30.99


IULTCS
ISO/DIS 14930.3
Leather -- Leather for dress gloves -- Specification 40.60 TC 120/SC 2
ISO 14931:2004
Leather -- Guide to the selection of leather for apparel (excluding furs) 90.60 TC 120/SC 2
ISO 15700:1998
Leather -- Tests for colour fastness -- Colour fastness to water spotting 90.93 IULTCS
ISO 15701:1998
Leather -- Tests for colour fastness -- Colour fastness to migration into plasticized poly


(vinyl chloride) 90.93 IULTCS
ISO 15702:1998
Leather -- Tests for colour fastness -- Colour fastness to machine washing 90.93 IULTCS
ISO 15703:1998
Leather -- Tests for colour fastness -- Colour fastness to mild washing 90.93 IULTCS
ISO 17070:2006
Leather -- Chemical tests -- Determination of pentachlorophenol content 90.20 IULTCS
ISO 17071:2006
Leather -- Physical and mechanical tests -- Determination of fogging characteristics 90.20


IULTCS
ISO/DIS 17072-1
Leather -- Chemical determination of metal content -- Part 1: Extractable metals 40.20 IULTCS
ISO/DIS 17072-2
Leather -- Chemical determination of metal content -- Part 2: Total metal content 40.20 IULTCS
ISO 17074:2006
Leather -- Physical and mechanical tests -- Determination of resistance to horizontal spread of


flame 90.20 IULTCS
ISO 17075:2007
Leather -- Chemical tests -- Determination of chromium(VI) content 60.60 IULTCS
ISO 17076:2006
Leather -- Physical and mechanical tests -- Determination of abrasion resistance of automotive


leather 90.92 IULTCS
ISO/NP 17076-1
Leather -- Determination of abrasion resistance -- Part 1: Taber method 10.99 IULTCS
ISO/NP 17076-2
Leather -- Determination of abrasion resistance -- Part 2: Martindale ball plate method 10.99


IULTCS
ISO 17186:2002
Leather -- Physical and mechanical tests -- Determination of surface coating thickness 90.92


IULTCS
ISO/CD 17186
Leather -- Physical and mechanical tests -- Determination of surface coating thickness 30.99


IULTCS
ISO 17226-1:2008
Leather -- Chemical determination of formaldehyde content -- Part 1: Method using high


performance liquid chromatography 60.60 IULTCS
ISO 17226-2:2008
Leather -- Chemical determination of formaldehyde content -- Part 2: Method using colorimetric


analysis 60.60 IULTCS
ISO 17226-2:2008/Cor 1:2009
60.60 IULTCS
ISO/NP 17226-3
Leather -- Chemical determination of formaldehyde content -- Part 3: Formaldehyde emissions


from leather 10.99 IULTCS
ISO 17227:2002
Leather -- Physical and mechanical tests -- Determination of dry heat resistance of leather


90.92 IULTCS
ISO/NP 17227
Leather -- Physical and mechanical tests -- Determination of dimensional stability of leather


10.99 IULTCS
ISO 17228:2005
Leather -- Tests for colour fastness -- Change in colour with accelerated ageing 90.92 IULTCS
ISO/NP 17228
Leather -- Tests for colour fastness -- Change in colour with accelerated ageing 10.99 IULTCS
ISO 17229:2002
Leather -- Physical and mechanical tests -- Determination of water vapour absorption 90.93


IULTCS
ISO 17230:2006
Leather -- Physical and mechanical tests -- Determination of water penetration pressure 90.20


IULTCS
ISO 17231:2006
Leather -- Physical and mechanical tests -- Determination of water repellency of garment


leather 90.20 IULTCS
ISO 17232:2006
Leather -- Physical and mechanical tests -- Determination of heat resistance of patent leather


90.20 IULTCS
ISO 17233:2002
Leather -- Physical and mechanical tests -- Determination of cold crack temperature of surface


coatings 90.93 IULTCS
ISO/TS 17234:2003
Leather -- Chemical tests -- Determination of certain azo colourants in dyed leathers 90.92


IULTCS
ISO/DIS 17234-1
Leather -- Chemical tests for the determination of certain azo colorants in dyed leathers --


Part 1: Determination of certain aromatic amines derived from azo colorants 40.99 IULTCS
ISO/CD 17234-2
Leather -- Chemical tests for the determination of certain azo colorants in dyed leathers --


Part 2: Determination of 4-aminoazobenzene derived from azo colorants 30.99 IULTCS
ISO/CD 17235
Leather -- Physical and mechanical tests -- Determination of softness 30.99 IULTCS
ISO 17235:2002
Leather -- Physical and mechanical tests -- Determination of softness 90.92 IULTCS
ISO 17236:2002
Leather -- Physical and mechanical tests -- Determination of extension set 90.93 IULTCS
ISO/NP 20433
Leather -- Tests for colour fastness -- Colour fastness to crocking 10.99 IULTCS
ISO 20433:2005
Leather -- Tests for colour fastness -- Colour fastness to crocking 90.92 IULTCS
ISO 22288:2006
Leather -- Physical and mechanical tests -- Determination of flex resistance by the vamp flex


method 90.92 IULTCS
ISO 23910:2007
Leather -- Physical and mechanical tests -- Measurement of stitch tear resistance 60.60 IULTCS
ISO 26082:2007
Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive


leather 90.92 IULTCS
ISO/NP 26082-1
Leather - Physical and mechanical tests method for determination of soiling -- Part 1:


Martindale method 10.99 IULTCS
ISO/DIS 26082-2
Leather - Physical and mechanical tests method for determination of soiling -- Part 2: Tumbling


method 40.99 IULTCS
ISO/FDIS 27587
Leather -- Chemical tests -- Determination of the free formaldehyde in process auxiliaries


50.20 IULTCS

59.140.35 Leather products
Including trunks, suitcases, handbags, purses, wallets, dog-collars, etc. made of materials


other than leather
Products of the clothing industry, see 61
59.140.40 Machines and equipment for leather and fur production
59.140.99 Other standards related to leather technology



http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.

No comments:

Post a Comment