Lastest & Cheapest ISO Standards In PDF (56)

http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.

ICS Field
ISO 1812:1976
Copper alloys -- Determination of iron content -- 1,10- Phenanthroline spectrophotometric method 90.60 TC 26
ISO 2543:1973
Copper and copper alloys -- Determination of manganese -- Spectrophotometric method 90.60 TC 26
ISO 2624:1990
Copper and copper alloys -- Estimation of average grain size 90.20 TC 26
ISO 3110:1975
Copper alloys -- Determination of aluminium as alloying element -- Volumetric method 90.60 TC 26
ISO 3111:1975
Copper alloys -- Determination of tin as alloying element -- Volumetric method 90.60 TC 26
ISO 3112:1975
Copper and copper alloys -- Determination of lead -- Extracting titration method 90.60 TC 26
ISO 3220:1975
Copper and copper alloys -- Determination of arsenic -- Photometric method 90.60 TC 26
ISO 4382-1:1991
Plain bearings -- Copper alloys -- Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings 90.93 TC 123/SC 2
ISO 4382-2:1991
Plain bearings -- Copper alloys -- Part 2: Wrought copper alloys for solid plain bearings 90.93 TC 123/SC 2
ISO 4740:1985
Copper and copper alloys -- Determination of zinc content -- Flame atomic absorption spectrometric method 90.60 TC 26
ISO 4741:1984
Copper and copper alloys -- Determination of phosphorus content -- Molybdovanadate spectrometric method 90.60 TC 26
ISO 4742:1984
Copper alloys -- Determination of nickel content -- Gravimetric method 90.60 TC 26
ISO 4743:1984
Copper alloys -- Determination of nickel content -- Titrimetric method 90.60 TC 26
ISO 4744:1984
Copper and copper alloys -- Determination of chromium content -- Flame atomic absorption spectrometric method 90.60 TC 26
ISO 4748:1984
Copper alloys -- Determination of iron content -- Na2EDTA titrimetric method 90.60 TC 26
ISO 4749:1984
Copper alloys -- Determination of lead content -- Flame atomic absorption spectrometric method 90.60 TC 26
ISO 4751:1984
Copper and copper alloys -- Determination of tin content -- Spectrometric method 90.60 TC 26
ISO 5956:1984
Copper and copper alloys -- Determination of antimony content -- Rhodamine B spectrometric method 90.60 TC 26
ISO 5959:1984
Copper and copper alloys -- Determination of bismuth content -- Diethyldithiocarbamate spectrometric method 90.60 TC 26
ISO 5960:1984
Copper alloys -- Determination of cadmium content -- Flame atomic absorption spectrometric method 90.60 TC 26
ISO 6437:1984
Copper alloys -- Determination of chromium content -- Titrimetric method 90.60 TC 26
ISO 7266:1984
Copper and copper alloys -- Determination of sulfur content -- Combustion titrimetric method 90.60 TC 26

77.120.40 Nickel, chromium and their alloys
Standard and/or project TC
ISO 6283:1995
Refined nickel 90.93 TC 155
ISO 6351:1985
Nickel -- Determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc contents -- Flame atomic absorption spectrometric method 90.93 TC 155/SC 3
ISO 6372-1:1989
Nickel and nickel alloys -- Terms and definitions -- Part 1: Materials 90.93 TC 155
ISO 6372-2:1989
Nickel and nickel alloys -- Terms and definitions -- Part 2: Refinery products 90.93 TC 155
ISO 7156:1991
Refined nickel -- Sampling 90.60 TC 155/SC 3
ISO 7523:1985
Nickel -- Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents -- Electrothermal atomic absorption spectrometric method 90.93 TC 155/SC 3
ISO 7524:1985
Nickel, ferronickel and nickel alloys -- Determination of carbon content -- Infra-red absorption method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7525:1985
Nickel -- Determination of sulfur content -- Methylene blue molecular absorption spectrometric method after generation of hydrogen sulfide 90.93 TC 155/SC 3
ISO 7526:1985
Nickel, ferronickel and nickel alloys -- Determination of sulfur content -- Infra-red absorption method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7527:1985
Nickel, ferronickel and nickel alloys -- Determination of sulfur content -- Iodimetric titration method after induction furnace combustion 90.93 TC 155/SC 3
ISO 7528:1989
Nickel alloys -- Determination of iron content -- Titrimetric method with potassium dichromate 90.20 TC 155/SC 3
ISO 7529:1989
Nickel alloys -- Determination of chromium content -- Potentiometric titration method with ammonium iron(II) sulfate 90.20 TC 155/SC 3
ISO 7530-1:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 1: General requirements and sample dissolution 90.93 TC 155/SC 3
ISO 7530-2:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 2: Determination of cobalt content 90.93 TC 155/SC 3
ISO 7530-3:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 3: Determination of chromium content 90.93 TC 155/SC 3
ISO 7530-4:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 4: Determination of copper content 90.93 TC 155/SC 3
ISO 7530-5:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 5: Determination of iron content 90.93 TC 155/SC 3
ISO 7530-6:1990
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 6: Determination of manganese content 90.93 TC 155/SC 3
ISO 7530-7:1992
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 7: Determination of aluminium content 90.60 TC 155/SC 3
ISO 7530-8:1992
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 8: Determination of silicon content 90.60 TC 155/SC 3
ISO 7530-9:1993
Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 9: Determination of vanadium content 90.60 TC 155/SC 3
ISO 9388:1992
Nickel alloys -- Determination of phosphorus content -- Molybdenum blue molecular absorption spectrometric method 90.60 TC 155/SC 3
ISO/TR 9721:1992
Nickel and nickel alloys -- Rules for material description based on chemical symbols 60.60 TC 155/SC 2
ISO 11400:1992
Nickel, ferronickel and nickel alloys -- Determination of phosphorus content -- Phosphovanadomolybdate molecular absorption spectrometric method 90.60 TC 155/SC 3
ISO 11433:1993
Nickel alloys -- Determination of titanium content -- Diantipyrylmethane molecular absorption spectrometric method 90.60 TC 155/SC 3
ISO/TR 11434:1992
Nickel alloys -- Determination of niobium and tantalum -- Ion exchange method 60.60 TC 155
ISO 11435:2005
Nickel alloys -- Determination of molybdenum -- Inductively coupled plasma atomic emission spectrometric method 90.60 TC 155/SC 3
ISO 11436:1993
Nickel and nickel alloys -- Determination of total boron content -- Curcumin molecular absorption spectrometric method 90.60 TC 155/SC 3
ISO 11437-1:1994
Nickel alloys -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 1: General requirements and sample dissolution 90.20 TC 155/SC 3
ISO 11437-2:1994
Nickel alloys -- Determination of trace-element content by electrothermal atomic absorption spectrometric method -- Part 2: Determination of lead content 90.20 TC 155/SC 3
ISO 12169:1996
Nickel oxide -- Determination of nickel content -- Electrolytic deposition method 90.60 TC 155/SC 3
ISO 22033:2005
Nickel alloys -- Determination of niobium -- Inductively coupled plasma atomic emission spectrometric method 90.60 TC 155/SC 3
ISO 22725:2007
Nickel alloys -- Determination of tantalum -- Inductively coupled plasma atomic emission spectrometric method 60.60 TC 155/SC 3

77.120.50 Titanium and titanium alloys
Standard and/or project TC
ISO 22960:2008
Titanium and titanium alloys -- Determination of iron -- Molecular absorption spectrometry using 1, 10-phenanthroline 60.60 TC 79/SC 11
ISO 22961:2008
Titanium and titanium alloys -- Determination of iron -- Atomic absorption spectrometry 60.60 TC 79/SC 11
ISO 22962:2008
Titanium and titanium alloys -- Determination of iron -- Inductively coupled plasma atomic emission spectrometry 60.60 TC 79/SC 11
ISO 22963:2008
Titanium and titanium alloys -- Determination of oxygen -- Infrared method after fusion under inert gas 60.60 TC 79/SC 11
ISO/DIS 28401
Light metals and their alloys -- Titanium and titanium alloys -- Classification and terminology 40.20 TC 79/SC 11

77.120.60 Lead, zinc, tin and their alloys
Standard and/or project TC
ISO 301:2006
Zinc alloy ingots intended for castings 90.20 TC 18/SC 2
ISO 714:1975
Zinc -- Determination of iron content -- Photometric method 90.20 TC 18/SC 1
ISO 752:2004
Zinc ingots 90.60 TC 18/SC 3
ISO 752:2004/Cor 1:2006
60.60 TC 18/SC 3
ISO 1169:2006
Zinc alloys -- Determination of aluminium content -- Titrimetric method 90.20 TC 18/SC 1
ISO 1976:1975
Zinc alloys -- Determination of copper content -- Electrolytic method 90.93 TC 18/SC 1
ISO 3750:2006
Zinc alloys -- Determination of magnesium content -- Flame atomic absorption spectrometric method 90.20 TC 18/SC 1
ISO 3815-1:2005
Zinc and zinc alloys -- Part 1: Analysis of solid samples by optical emission spectrometry 90.93 TC 18/SC 1
ISO 3815-2:2005
Zinc and zinc alloys -- Part 2: Analysis by inductively coupled plasma optical emission spectrometry 90.93 TC 18/SC 1
ISO 4381:2000
Plain bearings -- Lead and tin casting alloys for multilayer plain bearings 90.92 TC 123/SC 2
ISO 15201:2006
Zinc and zinc alloys -- Castings -- Specifications 90.20 TC 18/SC 2
ISO 20081:2005
Zinc and zinc alloys -- Method of sampling -- Specifications 90.93 TC 18/SC 1

77.120.70 Cadmium, cobalt and their alloys
77.120.99 Other non-ferrous metals and their alloys

77.140 Iron and steel products
Steel products for aerospace construction, see 49.025.10
77.140.01 Iron and steel products in general
Standard and/or project TC
ISO 404:1992
Steel and steel products -- General technical delivery requirements 90.60 TC 17/SC 20
ISO 630:1995
Structural steels -- Plates, wide flats, bars, sections and profiles 90.92 TC 17/SC 3
ISO 630:1995/Amd 1:2003
60.60 TC 17/SC 3
ISO/CD 630-1
Structural steels -- Part 1: General delivery conditions for hot rolled products 30.20 TC 17/SC 3
ISO/CD 630-2
Structural steels -- Part 2: Technical delivery conditions for non alloy structural steels for general purpose 30.20 TC 17/SC 3
ISO 1052:1982
Steels for general engineering purposes 90.20 TC 17/SC 3
ISO 4885:1996
Ferrous products -- Heat treatments -- Vocabulary 90.93 TC 17
ISO 6929:1987
Steel products -- Definitions and classification 90.92 TC 17
ISO/NP 6929
Steel products -- Definitions and classification 10.99 TC 17
ISO/NP 10474
Steel and steel products -- Inspection documents 10.99 TC 17/SC 20
ISO 10474:1991
Steel and steel products -- Inspection documents 90.92 TC 17/SC 20

77.140.10 Heat-treatable steels
Standard and/or project TC
ISO 683-1:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products 90.92 TC 17/SC 4
ISO 683-9:1988
Heat-treatable steels, alloy steels and free-cutting steels -- Part 9: Wrought free-cutting steels 90.60 TC 17/SC 4
ISO 683-10:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 10: Wrought nitriding steels 90.93 TC 17/SC 4
ISO 683-11:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 11: Wrought case-hardening steels 90.92 TC 17/SC 4
ISO 683-15:1992
Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines 90.93 TC 17/SC 4
ISO 683-17:1999
Heat-treated steels, alloy steels and free-cutting steels -- Part 17: Ball and roller bearing steels 90.20 TC 17/SC 4
ISO 683-18:1996
Heat-treatable steels, alloy steels and free- cutting steels -- Part 18: Bright products of unalloyed and low alloy steels 90.93 TC 17/SC 4
ISO 4954:1993
Steels for cold heading and cold extruding 90.60 TC 17/SC 4
ISO 5949:1983
Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs 90.93 TC 17/SC 7
ISO 9443:1991
Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions 90.93 TC 17/SC 4
ISO/TR 11637:1997
Boron treated engineering steels for quenching and tempering 90.93 TC 17/SC 4
ISO 11692:1994
Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures 90.60 TC 17/SC 4

77.140.15 Steels for reinforcement of concrete
Standard and/or project TC
ISO 6934-1:1991
Steel for the prestressing of concrete -- Part 1: General requirements 90.93 TC 17/SC 16
ISO 6934-2:1991
Steel for the prestressing of concrete -- Part 2: Cold-drawn wire 90.93 TC 17/SC 16
ISO 6934-3:1991
Steel for the prestressing of concrete -- Part 3: Quenched and tempered wire 90.93 TC 17/SC 16
ISO 6934-4:1991
Steel for the prestressing of concrete -- Part 4: Strand 90.93 TC 17/SC 16
ISO 6934-4:1991/Cor 1:1992
60.60 TC 17/SC 16
ISO 6934-4:1991/Cor 2:2000
60.60 TC 17/SC 16
ISO 6934-5:1991
Steel for the prestressing of concrete -- Part 5: Hot-rolled steel bars with or without subsequent processing 90.93 TC 17/SC 16
ISO 6935-1:2007
Steel for the reinforcement of concrete -- Part 1: Plain bars 60.60 TC 17/SC 16
ISO 6935-2:2007
Steel for the reinforcement of concrete -- Part 2: Ribbed bars 60.60 TC 17/SC 16
ISO 6935-3:1992
Steel for the reinforcement of concrete -- Part 3: Welded fabric 90.93 TC 17/SC 16
ISO 6935-3:1992/Cor 1:2000
60.60 TC 17/SC 16
ISO 10144:1991
Certification scheme for steel bars and wires for the reinforcement of concrete structures 90.93 TC 17/SC 16
ISO 10544:1992
Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric 90.93 TC 17/SC 16
ISO 11082:1992
Certification scheme for welded fabric for the reinforcement of concrete structures 90.93 TC 17/SC 16
ISO/TR 12662:1997
Certification scheme for prestressing steels 60.60 TC 17/SC 16
ISO/NP 12696
Cathodic protection of steel in concrete 10.99 TC 156
ISO/AWI 13270
Steel fibres for concrete -- Definitions and specifications 20.00 TC 17/SC 17
ISO 14654:1999
Epoxy-coated steel for the reinforcement of concrete 90.93 TC 17/SC 16
ISO 14655:1999
Epoxy-coated strand for the prestressing of concrete 90.93 TC 17/SC 16
ISO 14656:1999
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete 90.93 TC 17/SC 16
ISO/DIS 15630-1.2
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 1: Reinforcing bars, wire rod and wire 40.60 TC 17/SC 16
ISO 15630-1:2002
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 1: Reinforcing bars, wire rod and wire 90.92 TC 17/SC 16
ISO 15630-2:2002
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric 90.92 TC 17/SC 16
ISO/DIS 15630-2.2
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric 40.60 TC 17/SC 16
ISO 15630-3:2002
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 3: Prestressing steel 90.92 TC 17/SC 16
ISO/DIS 15630-3.2
Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 3: Prestressing steel 40.60 TC 17/SC 16
ISO/CD 15698-1
Steel for the reinforcement of concrete -- Headed bars -- Part 1: Requirements 30.60 TC 17/SC 16
ISO/CD 15698-2
Steel for the reinforcement of concrete -- Headed bars -- Part 2: Test methods 30.60 TC 17/SC 16
ISO 15835-1:2009
Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 1: Requirements 60.60 TC 17/SC 16
ISO 15835-2:2009
Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 2: Test methods 60.60 TC 17/SC 16
ISO 16020:2005
Steel for the reinforcement and prestressing of concrete -- Vocabulary 90.93 TC 17/SC 16

77.140.20 Stainless steels
Including alloyed steels, corrosion-resistant steels, heat-resisting steels, etc.
Standard and/or project TC
ISO 683-1:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products 90.92 TC 17/SC 4
ISO 683-9:1988
Heat-treatable steels, alloy steels and free-cutting steels -- Part 9: Wrought free-cutting steels 90.60 TC 17/SC 4
ISO 683-10:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 10: Wrought nitriding steels 90.93 TC 17/SC 4
ISO 683-11:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 11: Wrought case-hardening steels 90.92 TC 17/SC 4
ISO 683-15:1992
Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines 90.93 TC 17/SC 4
ISO 683-17:1999
Heat-treated steels, alloy steels and free-cutting steels -- Part 17: Ball and roller bearing steels 90.20 TC 17/SC 4
ISO 683-18:1996
Heat-treatable steels, alloy steels and free- cutting steels -- Part 18: Bright products of unalloyed and low alloy steels 90.93 TC 17/SC 4
ISO 4952:2006
Structural steels with improved atmospheric corrosion resistance 60.60 TC 17/SC 3
ISO 4954:1993
Steels for cold heading and cold extruding 90.60 TC 17/SC 4
ISO 4955:2005
Heat-resistant steels 90.93 TC 17/SC 4
ISO 5949:1983
Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs 90.93 TC 17/SC 7
ISO 7153-1:1991
Surgical instruments -- Metallic materials -- Part 1: Stainless steel 90.60 TC 170
ISO 7153-1:1991/Amd 1:1999
60.60 TC 170
ISO 9443:1991
Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions 90.93 TC 17/SC 4
ISO 9444-1:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths 60.60 TC 17/SC 4
ISO 9444-2:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and sheet/plate 60.60 TC 17/SC 4
ISO 9445-1:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths 60.60 TC 17/SC 4
ISO 9445-2:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and plate/sheet 60.60 TC 17/SC 4
ISO 11692:1994
Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures 90.60 TC 17/SC 4
ISO 11972:1998
Corrosion-resistant cast steels for general applications 90.60 TC 17/SC 11
ISO 11973:1999
Heat-resistant cast steels and alloys for general applications 90.20 TC 17/SC 11
ISO/DIS 15510
Stainless steels -- Chemical composition 40.93 TC 17/SC 4
ISO/TS 15510:2003
Stainless steels -- Chemical composition 90.92 TC 17/SC 4
ISO 16143-1:2004
Stainless steels for general purposes -- Part 1: Flat products 90.93 TC 17/SC 4
ISO 16143-2:2004
Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections 90.93 TC 17/SC 4
ISO 16143-3:2005
Stainless steels for general purposes -- Part 3: Wire 90.93 TC 17/SC 4
ISO/DIS 18632
Alloyed steel -- Determination of manganese -- Potentiometric and visual titration method 40.00 TC 17/SC 1
ISO/WD 19272
Alloyed steel -- Determination of fifteen elements -- Glow discharge optical emission spectrometry 20.60 TC 17/SC 1

77.140.25 Spring steels
Standard and/or project TC
ISO 683-14:2004
Heat-treatable steels, alloy steels and free-cutting steels -- Part 14: Hot-rolled steels for quenched and tempered springs 90.93 TC 17/SC 4
ISO 6931-1:1994
Stainless steels for springs -- Part 1: Wire 90.20 TC 17/SC 4
ISO 6931-2:2005
Stainless steels for springs -- Part 2: Narrow strip 90.93 TC 17/SC 4
ISO 8458-1:2002
Steel wire for mechanical springs -- Part 1: General requirements 90.93 TC 17/SC 17
ISO 8458-2:2002
Steel wire for mechanical springs -- Part 2: Patented cold-drawn non-alloy steel wire 90.93 TC 17/SC 17
ISO 8458-3:2002
Steel wire for mechanical springs -- Part 3: Oil-hardened and tempered wire 90.93 TC 17/SC 17
ISO 9442:1988
Steel -- Hot-rolled ribbed and grooved flats for spring leaves -- Tolerances and dimensions 90.20 TC 17/SC 4

77.140.30 Steels for pressure purposes
Steels for pressure pipes and tubes for specific use, see 77.140.75
Standard and/or project TC
ISO 2605-3:1985
Steel products for pressure purposes -- Derivation and verification of elevated temperature properties -- Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited 90.93 TC 17
ISO 4978:1983
Flat rolled steel products for welded gas cylinders 90.93 TC 17/SC 10
ISO 4991:2005
Steel castings for pressure purposes 90.60 TC 17/SC 11
ISO 6303:1981
Pressure vessel steels not included in ISO 2604, Parts 1 to 6 -- Derivation of long-time stress rupture properties 90.93 TC 17
ISO/TR 7468:1981
Summary of average stress rupture properties of wrought steels for boilers and pressure vessels 60.60 TC 17
ISO 9327-1:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 90.93 TC 17/SC 10
ISO 9327-2:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties 90.93 TC 17/SC 10
ISO 9327-3:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 3: Nickel steels with specified low temperature properties 90.93 TC 17/SC 10
ISO 9327-4:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength 90.93 TC 17/SC 10
ISO 9327-5:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 5: Stainless steels 90.93 TC 17/SC 10
ISO 9328-1:2003
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 90.92 TC 17/SC 10
ISO/CD 9328-1
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 30.99 TC 17/SC 10
ISO 9328-2:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties 90.92 TC 17/SC 10
ISO/CD 9328-2
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties 30.99 TC 17/SC 10
ISO 9328-3:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized 90.93 TC 17/SC 10
ISO 9328-3:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-4:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties 90.93 TC 17/SC 10
ISO 9328-4:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-5:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels, thermomechanically rolled 90.93 TC 17/SC 10
ISO 9328-5:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-6:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels, quenched and tempered 90.93 TC 17/SC 10
ISO 9328-6:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-7:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels 90.92 TC 17/SC 10
ISO/CD 9328-7
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels 30.99 TC 17/SC 10

77.140.35 Tool steels
Standard and/or project TC
ISO 4957:1999
Tool steels 90.20 TC 17/SC 4
ISO 5949:1983
Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs 90.93 TC 17/SC 7
ISO 11054:2006
Cutting tools -- Designation of high-speed steel groups 90.60 TC 29

77.140.40 Steels with special magnetic properties
77.140.45 Non-alloyed steels
ISO 683-1:1987
Heat-treatable steels, alloy steels and free-cutting steels -- Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products 90.92 TC 17/SC 4
ISO 683-18:1996
Heat-treatable steels, alloy steels and free- cutting steels -- Part 18: Bright products of unalloyed and low alloy steels 90.93 TC 17/SC

77.140.50 Flat steel products and semi-products
Including plate, sheet and strip
Steel strips for springs, see 77.140.25
Standard and/or project TC
ISO 3573:2008
Hot-rolled carbon steel sheet of commercial and drawing qualities 60.60 TC 17/SC 12
ISO 3574:2008
Cold-reduced carbon steel sheet of commercial and drawing qualities 60.60 TC 17/SC 12
ISO/NP 3575
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities 10.99 TC 17/SC 12
ISO 3575:2005
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities 90.92 TC 17/SC 12
ISO 4950-1:1995
High yield strength flat steel products -- Part 1: General requirements 90.93 TC 17/SC 3
ISO 4950-1:1995/Amd 1:2003
60.60 TC 17/SC 3
ISO 4950-2:1995
High yield strength flat steel products -- Part 2: Products supplied in the normalized or controlled rolled condition 90.93 TC 17/SC 3
ISO 4950-2:1995/Amd 1:2003
60.60 TC 17/SC 3
ISO 4950-3:1995
High yield strength flat steel products -- Part 3: Products supplied in the heat-treated (quenched + tempered) condition 90.93 TC 17/SC 3
ISO 4950-3:1995/Amd 1:2003
60.60 TC 17/SC 3
ISO 4960:2007
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % 60.60 TC 17/SC 12
ISO 4995:2008
Hot-rolled steel sheet of structural quality 60.60 TC 17/SC 12
ISO 4996:2007
Hot-rolled steel sheet of high yield stress structural quality 60.60 TC 17/SC 12
ISO 4997:2007
Cold-reduced carbon steel sheet of structural quality 60.60 TC 17/SC 12
ISO 4998:2005
Continuous hot-dip zinc-coated carbon steel sheet of structural quality 90.92 TC 17/SC 12
ISO/CD 4998
Continuous hot-dip zinc-coated carbon steel sheet of structural quality 30.20 TC 17/SC 12
ISO 4999:2005
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities 90.92 TC 17/SC 12
ISO/CD 4999
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities 30.20 TC 17/SC 12
ISO/CD 5000
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities 30.20 TC 17/SC 12
ISO 5000:2005
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities 90.92 TC 17/SC 12
ISO 5001:2007
Cold-reduced carbon steel sheet for vitreous enamelling 60.60 TC 17/SC 12
ISO 5002:2008
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities 60.60 TC 17/SC 12
ISO 5950:2008
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities 60.60 TC 17/SC 12
ISO 5951:2008
Hot-rolled steel sheet of higher yield strength with improved formability 60.60 TC 17/SC 12
ISO/CD 5952
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance 30.20 TC 17/SC 12
ISO 5952:2005
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance 90.92 TC 17/SC 12
ISO 5954:2007
Cold-reduced carbon steel sheet according to hardness requirements 60.60 TC 17/SC 12
ISO 6316:2008
Hot-rolled steel strip of structural quality 60.60 TC 17/SC 12
ISO 6317:2008
Hot-rolled carbon steel strip of commercial and drawing qualities 60.60 TC 17/SC 12
ISO 6930-1:2001
High yield strength steel plates and wide flats for cold forming -- Part 1: Delivery conditions for thermomechanically-rolled steels 90.93 TC 17/SC 3
ISO 6930-2:2004
High yield strength steel plates and wide flats for cold forming -- Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels 90.93 TC 17/SC 3
ISO 6932:2008
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % 60.60 TC 17/SC 12
ISO/NP 7452
Hot-rolled structural steel plates -- Tolerances on dimensions and shape 10.99 TC 17/SC 3
ISO 7452:2002
Hot-rolled structural steel plates -- Tolerances on dimensions and shape 90.92 TC 17/SC 3
ISO 7778:1983
Steel plate with specified through-thickness characteristics 90.93 TC 17/SC 3
ISO 7788:1985
Steel -- Surface finish of hot-rolled plates and wide flats -- Delivery requirements 90.93 TC 17/SC 3
ISO 9034:1987
Hot-rolled structural steel wide flats -- Tolerances on dimensions and shape 90.60 TC 17/SC 3
ISO/CD 9328-1
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 30.99 TC 17/SC 10
ISO 9328-1:2003
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 90.92 TC 17/SC 10
ISO 9328-2:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties 90.92 TC 17/SC 10
ISO/CD 9328-2
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties 30.99 TC 17/SC 10
ISO 9328-3:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized 90.93 TC 17/SC 10
ISO 9328-3:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-4:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties 90.93 TC 17/SC 10
ISO 9328-4:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-5:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels, thermomechanically rolled 90.93 TC 17/SC 10
ISO 9328-5:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-6:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels, quenched and tempered 90.93 TC 17/SC 10
ISO 9328-6:2004/CD Amd 1
30.99 TC 17/SC 10
ISO 9328-7:2004
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels 90.92 TC 17/SC 10
ISO/CD 9328-7
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels 30.99 TC 17/SC 10
ISO 9364:2006
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities 90.60 TC 17/SC 12
ISO 9444-1:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths 60.60 TC 17/SC 4
ISO 9444-2:2009
Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and sheet/plate 60.60 TC 17/SC 4
ISO 9445-1:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths 60.60 TC 17/SC 4
ISO 9445-2:2009
Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and plate/sheet 60.60 TC 17/SC 4
ISO 9473-1:2006
Textile machinery and accessories -- Strip steel for dents of reeds -- Part 1: Cold rolled strip steel 90.60 TC 72/SC 3
ISO 9473-2:2006
Textile machinery and accessories -- Strip steel for dents of reeds -- Part 2: Hardened strip steel 90.60 TC 72/SC 3
ISO 10384:2008
Hot-rolled carbon steel sheet as defined by chemical composition 60.60 TC 17/SC 12
ISO 11949:1995
Cold-reduced electrolytic tinplate 90.93 TC 17
ISO 11950:1995
Cold-reduced electrolytic chromium/chromium oxide-coated steel 90.93 TC 17
ISO 11951:1995
Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel 90.93 TC 17
ISO 13887:2004
Cold-reduced steel sheet of higher yield strength with improved formability 90.60 TC 17/SC 12
ISO 13976:2005
Hot-rolled steel sheet in coils of structural quality and heavy thickness 90.60 TC 17/SC 12
ISO 14590:2005
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability 90.60 TC 17/SC 12
ISO/CD 14788
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet 30.20 TC 17/SC 12
ISO 14788:2005
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet 90.92 TC 17/SC 12
ISO/CD 16160
Continuously hot-rolled steel sheet products -- Dimensional and shape tolerances 30.20 TC 17/SC 12
ISO 16160:2005
Continuously hot-rolled steel sheet products -- Dimensional and shape tolerances 90.92 TC 17/SC 12
ISO 16162:2005
Continuously cold-rolled steel sheet products -- Dimensional and shape tolerances 90.92 TC 17/SC 12
ISO/CD 16162
Continuously cold-rolled steel sheet products -- Dimensional and shape tolerances 30.20 TC 17/SC 12
ISO 16163:2005
Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances 90.92 TC 17/SC 12
ISO/CD 16163
Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances 30.20 TC 17/SC 12
ISO 16172:2006
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe 90.60 TC 17/SC 12
ISO 17577:2006
Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm 90.20 TC 17/SC 7
ISO 18286:2008
Hot-rolled stainless steel plates -- Tolerances on dimensions and shape 60.60 TC 17/SC 4
ISO 20805:2005
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming 90.92 TC 17/SC 12
ISO/NP 20805
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming 10.99 TC 17/SC 12

77.140.60 Steel bars and rods
Standard and/or project TC
ISO 722:1991
Rock drilling equipment -- Hollow drill steels in bar form, hexagonal and round 90.93 TC 82
ISO 1035-1:1980
Hot-rolled steel bars -- Part 1: Dimensions of round bars 90.93 TC 17
ISO 1035-2:1980
Hot-rolled steel bars -- Part 2: Dimensions of square bars 90.93 TC 17
ISO 1035-3:1980
Hot-rolled steel bars -- Part 3: Dimensions of flat bars 90.93 TC 17
ISO 1035-4:1982
Hot-rolled steel bars -- Part 4: Tolerances 90.93 TC 17
ISO 2938:1974
Hollow steel bars for machining 90.93 TC 5/SC 1
ISO 4951-1:2001
High yield strength steel bars and sections -- Part 1: General delivery requirements 90.93 TC 17/SC 3
ISO 4951-2:2001
High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels 90.93 TC 17/SC 3
ISO 4951-3:2001
High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels 90.93 TC 17/SC 3
ISO 9443:1991
Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions 90.93 TC 17/SC 4
ISO 16120-1:2001
Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements 90.92 TC 17/SC 17
ISO/CD 16120-1
Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements 30.60 TC 17/SC 17
ISO/CD 16120-2
Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general purpose wire rod 30.60 TC 17/SC 17
ISO 16120-2:2001
Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general purpose wire rod 90.92 TC 17/SC 17
ISO 16120-3:2001
Non-alloy steel wire rod for conversion to wire -- Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod 90.92 TC 17/SC 17
ISO/CD 16120-3
Non-alloy steel wire rod for conversion to wire -- Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod 30.60 TC 17/SC 17
ISO/CD 16120-4
Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications 30.60 TC 17/SC 17
ISO 16120-4:2001
Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications 90.92 TC 17/SC 17
ISO 20723:2004
Structural steels -- Surface condition of hot-rolled sections -- Delivery requirements 90.93 TC 17/SC 3

77.140.65 Steel wire, wire ropes and link chains
Lifting link chains and wire ropes, see 53.020.30
Steel wire for springs, see 77.140.25
Standard and/or project TC
ISO 2232:1990
Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes -- Specifications 90.93 TC 105
ISO 2408:2004
Steel wire ropes for general purposes -- Minimum requirements 90.93 TC 105
ISO 2532:1974
Steel wire ropes -- Vocabulary 90.93 TC 105
ISO 2701:1977
Drawn wire for general purpose non-alloy steel wire ropes -- Terms of acceptance 90.20 TC 105
ISO 3108:1974
Steel wire ropes for general purposes -- Determination of actual breaking load 90.93 TC 105
ISO 3189-1:1985
Sockets for wire ropes for general purposes -- Part 1: General characteristics and conditions of acceptance 90.93 TC 105
ISO 3189-1:1985/Cor 1:2002
60.60 TC 105
ISO 3189-2:1985
Sockets for wire ropes for general purposes -- Part 2: Special requirements for sockets produced by forging or machined from the solid 90.93 TC 105
ISO 3189-3:1985
Sockets for wire ropes for general purposes -- Part 3: Special requirements for sockets produced by casting 90.93 TC 105
ISO 4101:1983
Drawn steel wire for elevator ropes -- Specifications 90.93 TC 105
ISO 4344:2004
Steel wire ropes for lifts -- Minimum requirements 90.93 TC 105
ISO 4345:1988
Steel wire ropes -- Fibre main cores -- Specification 90.20 TC 105
ISO 4346:1977
Steel wire ropes for general purposes -- Lubricants -- Basic requirements 90.93 TC 105
ISO 6984:1990
Round non-alloy steel wires for stranded wire ropes for mine hoisting -- Specifications 90.93 TC 105
ISO 7531:1987
Wire rope slings for general purposes -- Characteristics and specifications 90.93 TC 105
ISO 7900:2006
Steel wire and wire products for fences -- Zinc- and zinc-alloy-coated steel barbed wire 90.20 TC 17/SC 17
ISO 7989-1:2006
Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 1: General principles 90.20 TC 17/SC 17
ISO 7989-2:2007
Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 2: Zinc or zinc-alloy coating 60.60 TC 17/SC 17
ISO 8792:1986
Wire rope slings -- Safety criteria and inspection procedures for use 90.93 TC 105
ISO 8793:1986
Steel wire ropes -- Ferrule-secured eye terminations 90.93 TC 105
ISO 8794:1986
Steel wire ropes -- Spliced eye terminations for slings 90.93 TC 105
ISO 9975:1990
Round non-alloy steel wires for locked coil mine winding ropes -- Specifications 90.93 TC 105
ISO 10425:2003
Steel wire ropes for the petroleum and natural gas industries -- Minimum requirements and terms of acceptance 90.93 TC 105
ISO 12076:2002
Steel wire ropes -- Determination of the actual modulus of elasticity 90.93 TC 105
ISO 16124:2004
Steel wire rod -- Dimensions and tolerances 90.93 TC 17/SC 17
ISO 16143-3:2005
Stainless steels for general purposes -- Part 3: Wire 90.93 TC 17/SC 4
ISO 16650:2004
Bead wire 90.93 TC 17/SC 17
ISO 17558:2006
Steel wire ropes -- Socketing procedures -- Molten metal and resin socketing 90.20 TC 105
ISO 17832:2009
Non-parallel steel wire and cords for tyre reinforcement 60.60 TC 17/SC 17
ISO 17893:2004
Steel wire ropes -- Vocabulary, designation and classification 90.93 TC 105
ISO 17893:2004/DAmd 1
40.20 TC 105
ISO 21669:2005
Steel wire ropes -- Determination of rotational properties 90.93 TC 105
ISO 22034-1:2007
Steel wire and wire products -- Part 1: General test methods 60.60 TC 17/SC 17
ISO 22034-2:2007
Steel wire and wire products -- Part 2: Tolerances on wire dimensions 60.60 TC 17/SC 17
ISO 23717:2006
Steel wire and wire products -- Hose reinforcement wire 90.20 TC 17/SC 17

77.140.70 Steel profiles
Including sections
Standard and/or project TC
ISO 657-1:1989
Hot-rolled steel sections -- Part 1: Equal-leg angles -- Dimensions 90.20 TC 17
ISO 657-2:1989
Hot-rolled steel sections -- Part 2: Unequal-leg angles -- Dimensions 90.20 TC 17
ISO 657-5:1976
Hot-rolled steel sections -- Part 5: Equal-leg angles and unequal-leg angles -- Tolerances for metric and inch series 90.93 TC 17
ISO 657-11:1980
Hot-rolled steel sections -- Part 11: Sloping flange channel sections (Metric series) -- Dimensions and sectional properties 90.93 TC 17
ISO 657-15:1980
Hot-rolled steel sections -- Part 15: Sloping flange beam sections (Metric series) -- Dimensions and sectional properties 90.93 TC 17
ISO 657-16:1980
Hot-rolled steel sections -- Part 16: Sloping flange column sections (metric series) -- Dimensions and sectional properties 90.93 TC 17
ISO 657-18:1980
Hot-rolled steel sections -- Part 18: L sections for shipbuilding (metric series) -- Dimensions, sectional properties and tolerances 90.93 TC 17
ISO 657-19:1980
Hot-rolled steel sections -- Part 19: Bulb flats (metric series) -- Dimensions, sectional properties and tolerances 90.93 TC 17
ISO 657-21:1983
Hot-rolled steel sections -- Part 21: T-sections with equal depth and flange width -- Dimensions 90.20 TC 17
ISO 4951-1:2001
High yield strength steel bars and sections -- Part 1: General delivery requirements 90.93 TC 17/SC 3
ISO 4951-2:2001
High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels 90.93 TC 17/SC 3
ISO 4951-3:2001
High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels 90.93 TC 17/SC 3
ISO 7452:2002
Hot-rolled structural steel plates -- Tolerances on dimensions and shape 90.92 TC 17/SC 3
ISO/NP 7452
Hot-rolled structural steel plates -- Tolerances on dimensions and shape 10.99 TC 17/SC 3
ISO 20723:2004
Structural steels -- Surface condition of hot-rolled sections -- Delivery requirements 90.93 TC 17/SC 3
ISO 24314:2006
Structural steels -- Structural steels for building with improved seismic resistance -- Technical delivery conditions 60.60 TC 17/SC 3

77.140.75 Steel pipes and tubes for specific use
Including hollow steel bars and sections for construction
Steel pipes for conducting fluids, see 23.040.10
Standard and/or project TC
ISO 559:1991
Steel tubes for water and sewage 90.93 TC 5/SC 1
ISO 630-2:2000
Structural steels -- Part 2: Technical delivery requirements for hot-finished hollow sections 90.92 TC 5/SC 1
ISO 657-14:2000
Hot-rolled steel sections -- Part 14: Hot-finished structural hollow sections -- Dimensions and sectional properties 90.92 TC 5/SC 1
ISO 1129:1980
Steel tubes for boilers, superheaters and heat exchangers -- Dimensions, tolerances and conventional masses per unit length 90.93 TC 5/SC 1
ISO 2037:1992
Stainless steel tubes for the food industry 90.93 TC 5/SC 1
ISO/FDIS 2531
Ductile iron pipes, fittings, accessories and their joints for water applications 50.00 TC 5/SC 2
ISO 2531:1998
Ductile iron pipes, fittings, accessories and their joints for water or gas applications 90.92 TC 5/SC 2
ISO 2937:1974
Plain end seamless steel tubes for mechanical application 90.93 TC 5/SC 1
ISO 3183:2007
Petroleum and natural gas industries -- Steel pipe for pipeline transportation systems 60.60 TC 67/SC 2
ISO 4019:2001
Structural steels -- Cold-formed, welded, structural hollow sections -- Dimensions and sectional properties 90.92 TC 5/SC 1
ISO 4179:2005
Ductile iron pipes and fittings for pressure and non-pressure pipelines -- Cement mortar lining 90.60 TC 5/SC 2
ISO 6594:2006
Cast iron drainage pipes and fittings -- Spigot series 90.93 TC 5/SC 2
ISO 6758:1980
Welded steel tubes for heat exchangers 90.20 TC 17/SC 19
ISO 6759:1980
Seamless steel tubes for heat exchangers 90.20 TC 17/SC 19
ISO 9302:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness 90.92 TC 17/SC 19
ISO 9303:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9304:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Eddy current testing for the detection of imperfections 90.92 TC 17/SC 19
ISO 9305:1989
Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections 90.92 TC 17/SC 19
ISO 9329-1:1989
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steels with specified room temperature properties 90.60 TC 17/SC 19
ISO 9329-2:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties 90.60 TC 17/SC 19
ISO 9329-3:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Unalloyed and alloyed steels with specified low temperature properties 90.60 TC 17/SC 19
ISO 9329-4:1997
Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Austenitic stainless steels 90.60 TC 17/SC 19
ISO 9330-1:1990
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steel tubes with specified room temperature properties 90.93 TC 17/SC 19
ISO 9330-2:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties 90.60 TC 17/SC 19
ISO 9330-3:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties 90.60 TC 17/SC 19
ISO 9330-4:2000
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties 90.93 TC 17/SC 19
ISO 9330-5:2000
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties 90.93 TC 17/SC 19
ISO 9330-6:1997
Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 6: Longitudinally welded austenitic stainless steel tubes 90.60 TC 17/SC 19
ISO 9349:2004
Preinsulated ductile iron pipeline systems 90.93 TC 5/SC 2
ISO 9402:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9598:1989
Seamless steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections 90.92 TC 17/SC 19
ISO 9764:1989
Electric resistance and induction welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal imperfections 90.92 TC 17/SC 19
ISO 9765:1990
Submerged arc-welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections 90.92 TC 17/SC 19
ISO 10124:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO/DIS 10332
Non-destructive testing of steel tubes -- Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness as a substitution for the hydraulic test 40.20 TC 17/SC 19
ISO 10332:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the verification of hydraulic leak-tightness 90.92 TC 17/SC 19
ISO 10543:1993
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing 90.92 TC 17/SC 19
ISO 10763:1994
Hydraulic fluid power -- Plain-end, seamless and welded precision steel tubes -- Dimensions and nominal working pressures 90.93 TC 131/SC 4
ISO 10799:2001
Structural steels -- Cold-formed, welded, structural hollow sections -- Technical delivery requirements 90.92 TC 5/SC 1
ISO/DIS 10799-1
Cold formed welded structural hollow sections of non-alloy and fine grain steels -- Part 1: Technical delivery conditions 40.99 TC 5/SC 1
ISO/DIS 10799-2
Cold formed welded structural hollow sections of non-alloy and fine grain steels -- Part 2: Dimensions and sectional properties 40.99 TC 5/SC 1
ISO/DIS 10893-1
Non-destructive testing of steel tubes -- Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak-tightness instead of the hydrostatic test 40.20 TC 17/SC 19
ISO/DIS 10893-2
Non-destructive testing of steel tubes -- Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-3
Non-destructive testing of steel tubes -- Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-4
Non-destructive testing of steel tubes -- Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-5
Non-destructive testing of steel tubes -- Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-6
Non-destructive testing of steel tubes -- Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-7
Non-destructive testing of steel tubes -- Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-8
Non-destructive testing of steel tubes -- Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-9
Non-destructive testing of steel tubes -- Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes 40.20 TC 17/SC 19
ISO/DIS 10893-10
Non-destructive testing of steel tubes -- Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-11
Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transversal imperfections 40.20 TC 17/SC 19
ISO/DIS 10893-12
Non-destructive testing of steel tubes -- Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 40.20 TC 17/SC 19
ISO 11496:1993
Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 11960:2004
Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells 90.92 TC 67/SC 5
ISO/DIS 11960
Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells 40.92 TC 67/SC 5
ISO 11960:2004/Cor 1:2006
60.60 TC 67/SC 5
ISO 11961:2008
Petroleum and natural gas industries -- Steel drill pipe 60.60 TC 67/SC 5
ISO 11961:2008/Cor 1:2009
60.60 TC 67/SC 5
ISO 12095:1994
Seamless and welded steel tubes for pressure purposes -- Liquid penetrant testing 90.92 TC 17/SC 19
ISO 12096:1996
Submerged arc-welded steel tubes for pressure purposes -- Radiographic testing of the weld seam for the detection of imperfections 90.92 TC 17/SC 19
ISO/DIS 12633-1
Hot finished structural hollow sections of non-alloy and fine grain steels -- Part 1: Technical delivery conditions 40.99 TC 5/SC 1
ISO/DIS 12633-2
Hot finished structural hollow sections of non-alloy and fine grain steels -- Part 2: Dimensions and sectional properties 40.99 TC 5/SC 1
ISO 13663:1995
Welded steel tubes for pressure purposes -- Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 13664:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube ends for the detection of laminar imperfections 90.92 TC 17/SC 19
ISO 13665:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube body for the detection of surface imperfections 90.92 TC 17/SC 19
ISO 13680:2008
Petroleum and natural gas industries -- Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock -- Technical delivery conditions 60.60 TC 67/SC 5
ISO 16132:2004
Ductile iron pipes and fittings -- Seal coats for cement mortar linings 90.93 TC 5/SC 2

77.140.80 Iron and steel castings
Standard and/or project TC
ISO 3755:1991
Cast carbon steels for general engineering purposes 90.60 TC 17/SC 11
ISO 4986:1992
Steel castings -- Magnetic particle inspection 90.92 TC 17/SC 11
ISO/DIS 4986
Steel and iron castings -- Magnetic particle inspection 40.99 TC 17/SC 11
ISO/DIS 4987
Steel and iron castings -- Liquid penetrant inspection 40.99 TC 17/SC 11
ISO 4987:1992
Steel castings -- Penetrant inspection 90.92 TC 17/SC 11
ISO 4990:2003
Steel castings -- General technical delivery requirements 90.60 TC 17/SC 11
ISO 4991:2005
Steel castings for pressure purposes 90.60 TC 17/SC 11
ISO 4992-1:2006
Steel castings -- Ultrasonic examination -- Part 1: Steel castings for general purposes 90.60 TC 17/SC 11
ISO 4992-2:2006
Steel castings -- Ultrasonic examination -- Part 2: Steel castings for highly stressed components 90.60 TC 17/SC 11
ISO 4993:2009
Steel and iron castings -- Radiographic inspection 60.60 TC 17/SC 11
ISO 7186:1996
Ductile iron products for sewage applications 90.92 TC 5/SC 2
ISO/CD 7186
Ductile iron products for sewage applications 30.99 TC 5/SC 2
ISO 9477:1992
High strength cast steels for general engineering and structural purposes 90.60 TC 17/SC 11
ISO/DIS 10679
Steel -- Cast tool steel 40.99 TC 17/SC 11
ISO 11970:2001
Specification and approval of welding procedures for production welding of steel castings 90.60 TC 17/SC 11
ISO 11971:2008
Steel and iron castings -- Visual examination of surface quality 60.60 TC 17/SC 11
ISO 11972:1998
Corrosion-resistant cast steels for general applications 90.60 TC 17/SC 11
ISO 11973:1999
Heat-resistant cast steels and alloys for general applications 90.20 TC 17/SC 11
ISO 13520:2002
Determination of ferrite content in austenitic stainless steel castings 90.60 TC 17/SC 11
ISO 13521:1999
Austenitic manganese steel castings 90.20 TC 17/SC 11
ISO 13583-1:2000
Centrifugally cast steel and alloy products -- Part 1: General testing and tolerances 90.60 TC 17/SC 11
ISO 13583-2:2003
Centrifugally cast steel and alloy products -- Part 2: Heat resistant materials 90.60 TC 17/SC 11
ISO 14737:2003
Cast non-alloy and low alloy steels for general applications 90.60 TC 17/SC 11
ISO 16468:2005
Investment castings (steel, nickel alloys and cobalt alloys) -- General technical requirements 90.60 TC 17/SC 11
ISO 19959:2005
Visual examination of the surface condition of investment castings -- Steel, nickel alloys and cobalt alloys 90.60 TC 17/SC 11
ISO 19960:2005
Cast steels and alloys with special physical properties 90.60 TC 17/SC 11

77.140.85 Iron and steel forgings
Standard and/or project TC
ISO 9327-1:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 1: General requirements 90.93 TC 17/SC 10
ISO 9327-2:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties 90.93 TC 17/SC 10
ISO 9327-3:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 3: Nickel steels with specified low temperature properties 90.93 TC 17/SC 10
ISO 9327-4:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength 90.93 TC 17/SC 10
ISO 9327-5:1999
Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 5: Stainless steels 90.93 TC 17/SC 10
ISO/TR 15461:1997
Steel forgings -- Testing frequency, sampling conditions and test methods for mechanical tests 60.60 TC 17/SC 10

77.140.99 Other iron and steel products
Standard and/or project TC
ISO 1005-1:1994
Railway rolling stock material -- Part 1: Rough-rolled tyres for tractive and trailing stock -- Technical delivery conditions 90.20 TC 17
ISO 1005-2:1986
Railway rolling stock material -- Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock -- Dimensional, balancing and assembly requirements 90.93 TC 17
ISO 1005-3:1982
Railway rolling stock material -- Part 3: Axles for tractive and trailing stock -- Quality requirements 90.20 TC 17
ISO 1005-4:1986
Railway rolling stock material -- Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock -- Quality requirements 90.93 TC 17
ISO 1005-6:1994
Railway rolling stock material -- Part 6: Solid wheels for tractive and trailing stock -- Technical delivery conditions 90.20 TC 17
ISO 1005-7:1982
Railway rolling stock material -- Part 7: Wheelsets for tractive and trailing stock -- Quality requirements 90.20 TC 17
ISO 1005-8:1986
Railway rolling stock material -- Part 8: Solid wheels for tractive and trailing stock -- Dimensional and balancing requirements 90.93 TC 17
ISO 1005-9:1986
Railway rolling stock material -- Part 9: Axles for tractive and trailing stock -- Dimensional requirements 90.93 TC 17
ISO 14657:2005
Zinc-coated steel for the reinforcement of concrete 90.93 TC 17/SC 16

77.150 Products of non-ferrous metals
Including products of non-ferrous metal alloys
Products of non-ferrous metals for aerospace construction, see 49.025
77.150.01 Products of non-ferrous metals in general
Standard and/or project TC
ISO/AWI 3134
Aluminium and aluminium alloys -- Terms and definition -- General terms 20.00 TC 79
ISO 3134-1:1985
Light metals and their alloys -- Terms and definitions -- Part 1: Materials 90.92 TC 79
ISO 3134-2:1985
Light metals and their alloys -- Terms and definitions -- Part 2: Unwrought products 90.92 TC 79
ISO 3134-3:1985
Light metals and their alloys -- Terms and definitions -- Part 3: Wrought products 90.92 TC 79
ISO 3134-4:1985
Light metals and their alloys -- Terms and definitions -- Part 4: Castings 90.92 TC 79
ISO 6537:1982
Pneumatic fluid power systems -- Cylinder barrels -- Requirements for non-ferrous metallic tubes 90.93 TC 131/SC 3

77.150.10 Aluminium products
Standard and/or project TC
ISO 209:2007
Aluminium and aluminium alloys -- Chemical composition 60.60 TC 79/SC 6
ISO 2378:1972
Aluminium alloy chill castings -- Reference test bar 90.93 TC 79/SC 7
ISO 2379:1972
Aluminium alloy sand castings -- Reference test bar 90.93 TC 79/SC 7
ISO 3522:2007
Aluminium and aluminium alloys -- Castings -- Chemical composition and mechanical properties 60.60 TC 79/SC 7
ISO 5193:1981
Wrought aluminium and aluminium alloys -- Drawn round bars -- Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter) 90.92 TC 79/SC 6
ISO 6279:2006
Plain bearings -- Aluminium alloys for solid bearings 90.60 TC 123/SC 2
ISO/CD 6361-1
Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 1: Technical conditions for inspection and delivery 30.60 TC 79/SC 6
ISO 6361-1:1986
Wrought aluminium and aluminium alloy sheets, strips and plates -- Part 1: Technical conditions for inspection and delivery 90.92 TC 79/SC 6
ISO 6361-2:1990
Wrought aluminium and aluminium alloy sheets, strips and plates -- Part 2: Mechanical properties 90.92 TC 79/SC 6
ISO/CD 6361-2
Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 2: Mechanical properties 30.60 TC 79/SC 6
ISO/CD 6361-3
Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 3: Strips -- Tolerances on shape and dimensions 30.60 TC 79/SC 6
ISO 6361-3:1985
Wrought aluminium and aluminium alloy sheets, strips and plates -- Part 3: Strips -- Tolerances on shape and dimensions 90.92 TC 79/SC 6
ISO/CD 6361-4
Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 4: Sheets and plates -- Tolerances on form and dimensions 30.60 TC 79/SC 6
ISO 6361-4:1988
Wrought aluminium and aluminium alloy sheets, strips and plates -- Part 4: Sheets and plates -- Tolerances on form and dimensions 90.92 TC 79/SC 6
ISO/CD 6361-5
Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 5: Chemical composition 30.60 TC 79/SC 6
ISO 6362-1:1986
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 1: Technical conditions for inspection and delivery 90.92 TC 79/SC 6
ISO 6362-2:1990
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 2: Mechanical properties 90.92 TC 79/SC 6
ISO 6362-3:2001
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 3: Extruded rectangular bars -- Tolerances on shape and dimensions 90.92 TC 79/SC 6
ISO 6362-4:1988
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 4: Extruded profiles -- Tolerances on shape and dimensions 90.92 TC 79/SC 6
ISO 6362-5:2001
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles -- Part 5: Extruded round, square and hexagonal bars -- Tolerances on shape and dimensions 90.92 TC 79/SC 6
ISO 6363-1:1988
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 1: Technical conditions for inspection and delivery 90.92 TC 79/SC 6
ISO 6363-2:1993
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 2: Mechanical properties 90.92 TC 79/SC 6
ISO 6363-4:1991
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 4: Drawn rectangular bars -- Tolerances on form and dimensions 90.92 TC 79/SC 6
ISO 6363-5:1992
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -- Part 5: Drawn square and hexagonal bars -- Tolerances on form and dimensions 90.92 TC 79/SC 6
ISO 6365-1:1988
Wrought aluminium and aluminium alloy cold-drawn wire -- Part 1: Technical conditions for inspection and delivery 90.92 TC 79/SC 6
ISO/CD 7271
Aluminium and aluminium alloys -- Foil and thin strip -- Dimensional tolerances 30.20 TC 79/SC 6
ISO 7271:1982
Aluminium and aluminium alloys -- Foil and thin strip -- Dimensional tolerances 90.92 TC 79/SC 6
ISO 7274:1981
Wrought aluminium and aluminium alloys -- Drawn round bars -- Tolerances on shape and dimensions (All minus tolerances on diameter) 90.93 TC 79/SC 6
ISO 7722:1985
Aluminium alloy castings produced by gravity, sand, or chill casting, or by related processes -- General conditions for inspection and delivery 90.93 TC 79/SC 7
ISO/NP 13085
Petroleum and natural gas industries -- Aluminium alloy pipe for use as tubing for wells 10.99 TC 67
ISO/NP 15546
Petroleum and natural gas industries -- Aluminium alloy drill pipe 10.99 TC 67
ISO 15546:2007
Petroleum and natural gas industries -- Aluminium alloy drill pipe 90.92 TC 67
ISO/NP 27627
Petroleum and natural gas industries -- Aluminium alloy drill pipe thread connection gauging 10.99 TC 67

77.150.20 Magnesium products
Standard and/or project TC
ISO 2377:1972
Magnesium alloy sand castings -- Reference test bar 90.60 TC 79/SC 5
ISO 7773:1983
Magnesium alloys -- Round bars and tubes -- Dimensional tolerances 90.60 TC 79/SC 5
ISO 16220:2005
Magnesium and magnesium alloys -- Magnesium alloy ingots and castings 90.60 TC 79/SC 5
ISO 16220:2005/Amd 1:2007
Additional alloys 60.60 TC 79/SC 5

77.150.30 Copper products
Standard and/or project TC
ISO 197-1:1983
Copper and copper alloys -- Terms and definitions -- Part 1: Materials 90.20 TC 26
ISO 197-2:1983
Copper and copper alloys -- Terms and definitions -- Part 2: Unwrought products (Refinery shapes) 90.20 TC 26
ISO 197-3:1983
Copper and copper alloys -- Terms and definitions -- Part 3: Wrought products 90.20 TC 26
ISO 197-4:1983
Copper and copper alloys -- Terms and definitions -- Part 4: Castings 90.20 TC 26
ISO 431:1981
Copper refinery shapes 90.20 TC 26

77.150.40 Nickel and chromium products
Standard and/or project TC
ISO 6208:1992
Nickel and nickel alloy plate, sheet and strip 90.60 TC 155/SC 2
ISO 6372-3:1989
Nickel and nickel alloys -- Terms and definitions -- Part 3: Wrought products and castings 90.93 TC 155
ISO 9722:1992
Nickel and nickel alloys -- Composition and forms of wrought products 90.60 TC 155/SC 2
ISO 9723:1992
Nickel and nickel alloy bars 90.60 TC 155/SC 2
ISO 9724:1992
Nickel and nickel alloy wire and drawing stock 90.60 TC 155/SC 2
ISO 9725:1992
Nickel and nickel alloy forgings 90.60 TC 155/SC 2
ISO 12725:1997
Nickel and nickel alloy castings 90.60 TC 155/SC 2

77.150.50 Titanium products
Standard and/or project TC
ISO 25902-1:2009
Titanium pipes and tubes -- Non-destructive testing -- Part 1: Eddy-current examination 60.60 TC 79/SC 11
ISO/DIS 25902-2
Titanium pipes and tubes -- Non-destructive testing -- Part 2: Ultrasonic examination for the detection of longitudinal flaws 40.60 TC 79/SC 11

77.150.60 Lead, zinc and tin products
77.150.70 Cadmium and cobalt products
77.150.99 Other products of non-ferrous metals

77.160 Powder metallurgy
Including sintered metal materials and hard metals
Standard and/or project TC
ISO 2738:1999
Sintered metal materials, excluding hardmetals -- Permeable sintered metal materials -- Determination of density, oil content and open porosity 90.20 TC 119/SC 3
ISO 2739:2006
Sintered metal bushes -- Determination of radial crushing strength 90.92 TC 119/SC 3
ISO 2740:2009
Sintered metal materials, excluding hardmetals -- Tensile test pieces 60.60 TC 119/SC 3
ISO 3252:1999
Powder metallurgy -- Vocabulary 90.20 TC 119
ISO 3312:1987
Sintered metal materials and hardmetals -- Determination of Young modulus 90.20 TC 119/SC 3
ISO 3325:1996
Sintered metal materials, excluding hardmetals -- Determination of transverse rupture strength 90.93 TC 119/SC 3
ISO 3325:1996/Amd 1:2001
Precision statement 60.60 TC 119/SC 3
ISO 3326:1975
Hardmetals -- Determination of (the magnetization) coercivity 90.93 TC 119/SC 4
ISO 3327:2009
Hardmetals -- Determination of transverse rupture strength 60.60 TC 119/SC 4
ISO 3369:2006
Impermeable sintered metal materials and hardmetals -- Determination of density 90.92 TC 119/SC 3
ISO 3738-1:1982
Hardmetals -- Rockwell hardness test (scale A) -- Part 1: Test method 90.93 TC 119/SC 4
ISO 3738-2:1988
Hardmetals -- Rockwell hardness test (scale A) -- Part 2: Preparation and calibration of standard test blocks 90.93 TC 119/SC 4
ISO 3878:1983
Hardmetals -- Vickers hardness test 90.93 TC 119/SC 4
ISO 3907:1985
Hardmetals -- Determination of total carbon content -- Gravimetric method 90.92 TC 119/SC 4
ISO/FDIS 3907
Hardmetals -- Determination of total carbon -- Gravimetric method 50.20 TC 119/SC 4
ISO 3908:1985
Hardmetals -- Determination of insoluble (free) carbon content -- Gravimetric method 90.92 TC 119/SC 4
ISO/FDIS 3908
Hardmetals -- Determination of insoluble (free) carbon -- Gravimetric method 50.20 TC 119/SC 4
ISO 3909:1976
Hardmetals -- Determination of cobalt -- Potentiometric method 90.93 TC 119/SC 4
ISO 3923-1:2008
Metallic powders -- Determination of apparent density -- Part 1: Funnel method 60.60 TC 119/SC 2
ISO 3923-2:1981
Metallic powders -- Determination of apparent density -- Part 2: Scott volumeter method 90.92 TC 119/SC 2
ISO 3927:2001
Metallic powders, excluding powders for hardmetals -- Determination of compressibility in uniaxial compression 90.93 TC 119/SC 2
ISO 3927:2001/Cor 1:2008
60.60 TC 119/SC 2
ISO 3928:1999
Sintered metal materials, excluding hardmetals -- Fatigue test pieces 90.92 TC 119/SC 3
ISO 3953:1993
Metallic powders -- Determination of tap density 90.60 TC 119/SC 2
ISO 3954:2007
Powders for powder metallurgical purposes -- Sampling 60.60 TC 119/SC 2
ISO 3995:1985
Metallic powders -- Determination of green strength by transverse rupture of rectangular compacts 90.60 TC 119/SC 2
ISO 4003:1977
Permeable sintered metal materials -- Determination of bubble test pore size 90.93 TC 119/SC 3
ISO 4022:1987
Permeable sintered metal materials -- Determination of fluid permeability 90.20 TC 119/SC 3
ISO 4489:1978
Sintered hardmetals -- Sampling and testing 90.93 TC 119/SC 4
ISO 4490:2008
Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter) 60.60 TC 119/SC 2
ISO 4491-1:1989
Metallic powders -- Determination of oxygen content by reduction methods -- Part 1: General guidelines 90.93 TC 119/SC 2
ISO 4491-2:1997
Metallic powders -- Determination of oxygen content by reduction methods -- Part 2: Loss of mass on hydrogen reduction (hydrogen loss) 90.93 TC 119/SC 2
ISO 4491-3:1997
Metallic powders -- Determination of oxygen content by reduction methods -- Part 3: Hydrogen-reducible oxygen 90.93 TC 119/SC 2
ISO 4491-4:1989
Metallic powders -- Determination of oxygen content by reduction methods -- Part 4: Total oxygen by reduction-extraction 90.93 TC 119/SC 2
ISO 4492:1985
Metallic powders, excluding powders for hardmetals -- Determination of dimensional changes associated with compacting and sintering 90.93 TC 119/SC 2
ISO 4496:1978
Metallic powders -- Determination of acid insoluble content in iron, copper, tin and bronze powders 90.93 TC 119/SC 2
ISO 4497:1983
Metallic powders -- Determination of particle size by dry sieving 90.93 TC 119/SC 2
ISO 4498:2005
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness and microhardness 90.93 TC 119/SC 3
ISO 4498-1:1990
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 1: Materials of essentially uniform section hardness 90.93 TC 119/SC 3
ISO 4498-2:1981
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen 90.93 TC 119/SC 3
ISO 4499-1:2008
Hardmetals -- Metallographic determination of microstructure -- Part 1: Photomicrographs and description 60.60 TC 119/SC 4
ISO 4499-2:2008
Hardmetals -- Metallographic determination of microstructure -- Part 2: Measurement of WC grain size 60.60 TC 119/SC 4
ISO 4501:1978
Hardmetals -- Determination of titanium -- Photometric peroxide method 90.93 TC 119/SC 4
ISO 4503:1978
Hardmetals -- Determination of contents of metallic elements by X-ray fluorescence -- Fusion method 90.93 TC 119/SC 4
ISO 4505:1978
Hardmetals -- Metallographic determination of porosity and uncombined carbon 90.93 TC 119/SC 4
ISO 4506:1979
Hardmetals -- Compression test 90.93 TC 119/SC 4
ISO 4507:2000
Sintered ferrous materials, carburized or carbonitrided -- Determination and verification of case-hardening depth by a micro-hardness test 90.93 TC 119/SC 3
ISO 4883:1978
Hardmetals -- Determination of contents of metallic elements by X-ray fluorescence -- Solution method 90.93 TC 119/SC 4
ISO 4884:1978
Hardmetals -- Sampling and testing of powders using sintered test pieces 90.93 TC 119/SC 4
ISO 5754:1978
Sintered metal materials, excluding hardmetals -- Unnotched impact test piece 90.20 TC 119/SC 3
ISO/WD 5755
Sintered metal materials -- Specifications 20.20 TC 119/SC 5
ISO 5755:2001
Sintered metal materials -- Specifications 90.92 TC 119/SC 5
ISO 7625:2006
Sintered metal materials, excluding hardmetals -- Preparation of samples for chemical analysis for determination of carbon content 90.20 TC 119/SC 3
ISO 7627-1:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 1: General requirements 90.93 TC 119/SC 4
ISO 7627-2:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) 90.93 TC 119/SC 4
ISO 7627-3:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 3: Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) 90.93 TC 119/SC 4
ISO 7627-4:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 4: Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) 90.93 TC 119/SC 4
ISO 7627-5:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) 90.93 TC 119/SC 4
ISO 7627-6:1985
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m) 90.93 TC 119/SC 4
ISO 10070:1991
Metallic powders -- Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions 90.93 TC 119/SC 2
ISO 10076:1991
Metallic powders -- Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement 90.93 TC 119/SC 2
ISO 11873:2005
Hardmetals -- Determination of sulfur and carbon contents in cobalt metal powders -- Infrared detection method 90.93 TC 119/SC 4
ISO 11873:2005/Cor 1:2008
60.60 TC 119/SC 4
ISO/DIS 11876
Hardmetals -- Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders -- Flame atomic absorption spectrometric method 40.60 TC 119/SC 4
ISO 11877:2008
Hardmetals -- Determination of silicon in cobalt metal powders -- Photometric method 60.60 TC 119/SC 4
ISO 13944:1996
Lubricated metal-powder mixes -- Determination of lubricant content -- Modified Soxhlet extraction method 90.60 TC 119/SC 2
ISO 13947:2007
Metallic powders -- Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen 60.60 TC 119/SC 2
ISO 14168:2003
Metallic powders, excluding hardmetals -- Method for testing copper-base infiltrating powders 90.60 TC 119/SC 2
ISO 14317:2006
Sintered metal materials excluding hardmetals -- Determination of compressive yield strength 60.60 TC 119/SC 3
ISO/TR 14321:1997
Sintered metal materials, excluding hardmetals -- Metallographic preparation and examination 60.60 TC 119/SC 3
ISO 17352:2008
Hardmetals -- Determination of silicon in cobalt metal powders using graphite-furnace atomic absorption 60.60 TC 119/SC 4
ISO 18549-1:2009
Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 1: Determination of apparent density at elevated temperatures 60.60 TC 119/SC 2
ISO 18549-2:2009
Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 2: Determination of flow rate at elevated temperatures 60.60 TC 119/SC 2
ISO/CD 22068
Sintered metal injection moulded materials -- Specifications 30.60 TC 119/SC 5
ISO/DIS 22394
Hardmetals -- Knoop hardness test 40.20 TC 119/SC 4
ISO/DIS 23519
Sintered metal materials, excluding hardmetals -- Measurement of surface roughness 40.60 TC 119/SC 3
ISO/DIS 26482
Hardmetals -- Determination of lead and cadmium 40.60 TC 119/SC 4
ISO 28079:2009
Hardmetals -- Palmqvist toughness test 60.60 TC 119/SC 4
ISO/CD 28080
Hardmetals -- Abrasion tests for hardmetals 30.92 TC 119/SC 4
ISO/DIS 28279
Sintered metal materials -- Determination of cleanliness of metallic- powder parts 40.60 TC 119/SC 3

77.180 Equipment for the metallurgical industry



http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.