http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.
ICS Field
ISO 1382:2008
Rubber -- Vocabulary 60.60 TC 45
ISO 1629:1995
Rubber and latices -- Nomenclature 90.93 TC 45
ISO 1629:1995/Amd 1:2007
60.60 TC 45
ISO 3877-1:1997
Tyres, valves and tubes -- List of equivalent terms -- Part 1: Tyres 90.60 TC 31
ISO 3877-2:1997
Tyres, valves and tubes -- List of equivalent terms -- Part 2: Tyre valves 90.60 TC 31
ISO 3877-3:1978
Tyres, valves and tubes -- List of equivalent terms -- Part 3: Tubes 90.60 TC 31
ISO 3877-4:1984
Tyres, valves and tubes -- List of equivalent terms -- Part 4: Solid tyres 90.60 TC 31
ISO 4223-1:2002
Definitions of some terms used in the tyre industry -- Part 1: Pneumatic tyres 90.60 TC 31
ISO 4223-1:2002/NP Amd 1
10.99 TC 31
ISO 4223-2:1991
Definitions of some terms used in the tyre industry -- Part 2: Solid tyres 90.60 TC 31
ISO 6194-2:2009
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 2: Vocabulary 60.60 TC 131/SC 7
ISO/DIS 6472.2
Rubber compounding ingredients -- Symbols and abbreviated terms 40.20 TC 45
ISO 8153-1
Aerospace fluid systems and components -- Vocabulary -- Part 1: Hose assemblies 60.00 TC 20/SC 10
ISO/TR 8517:1988
Rubber- or plastics-covered rollers -- Glossary 90.93 TC 45/SC 4
ISO 8604:1988
Plastics -- Prepregs -- Definitions of terms and symbols for designations 90.93 TC 61/SC 1
ISO/NP 16589-2
Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 2: Vocabulary 10.99 TC 131/SC 7
ISO 18064:2003
Thermoplastic elastomers -- Nomenclature and abbreviated terms 90.93 TC 45
01.040.85 Paper technology (Vocabularies)
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 4046-1:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 1: Alphabetical index 90.93 TC 6
ISO 4046-2:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 2: Pulping terminology 90.93 TC 6
ISO 4046-3:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 3: Paper-making terminology 90.93 TC 6
ISO 4046-4:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 4: Paper and board grades and converted products 90.93 TC 6
ISO 4046-5:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 5: Properties of pulp, paper and board 90.93 TC 6
ISO/NP 12625-1
Tissue paper and tissue products -- Part 1: General guidance on terms 10.99 TC 6/SC 2
ISO 12625-1:2005
Tissue paper and tissue products -- Part 1: General guidance on terms 90.92 TC 6/SC 2
01.040.87 Paint and colour industries (Vocabularies)
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 4618:2006
Paints and varnishes -- Terms and definitions 90.60 TC 35
01.040.91 Construction materials and building (Vocabularies)
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 1791:1983
Building construction -- Modular co-ordination -- Vocabulary 90.20 TC 59
ISO 1803:1997
Building construction -- Tolerances -- Expression of dimensional accuracy -- Principles and terminology 90.20 TC 59
ISO 1804:1972
Doors -- Terminology 90.60 TC 162
ISO 2444:1988
Joints in building -- Vocabulary 90.60 TC 59/SC 8
ISO 3258:1976
Air distribution and air diffusion -- Vocabulary 95.20 TC 144
ISO 3649:1980
Cleaning equipment for air or other gases -- Vocabulary 90.60 TC 142
ISO 3880-1:1977
Building construction -- Stairs -- Vocabulary 90.93 TC 59
ISO 6707-1:2004
Building and civil engineering -- Vocabulary -- Part 1: General terms 90.60 TC 59/SC 2
ISO 6707-2:1993
Building and civil engineering -- Vocabulary -- Part 2: Contract terms 90.93 TC 59/SC 2
ISO/CD 6927
Building construction -- Jointing products -- Sealants -- Vocabulary 30.99 TC 59/SC 8
ISO 6927:1981
Building construction -- Jointing products -- Sealants -- Vocabulary 90.92 TC 59/SC 8
ISO 7078:1985
Building construction -- Procedures for setting out, measurement and surveying -- Vocabulary and guidance notes 90.60 TC 59
ISO 8930:1987
General principles on reliability for structures -- List of equivalent terms 90.60 TC 98/SC 1
ISO 11375:1998
Building construction machinery and equipment -- Terms and definitions 90.60 TC 195
ISO 11886:2002
Building construction machinery and equipment -- Pile driving and extracting equipment -- Terminology and commercial specifications 90.93 TC 195
ISO 11886:2002/Cor 1:2006
60.60 TC 195
ISO 13006:1998
Ceramic tiles -- Definitions, classification, characteristics and marking 90.92 TC 189
ISO/NP 13006
Ceramic tiles -- Definitions, classification, characteristics and marking 10.99 TC 189
ISO/AWI 13316
Terminology for doors and windows 20.00 TC 162
ISO 15688:2003
Road construction and maintenance equipment -- Soil stabilizers -- Terminology and commercial specifications 90.60 TC 195
ISO 15689:2003
Road construction and maintenance equipment -- Powder binder spreaders -- Terminology and commercial specifications 90.60 TC 195
ISO 16039:2004
Road construction and maintenance equipment -- Slipform pavers -- Definitions and commercial specifications 90.93 TC 195
ISO 16818:2008
Building environment design -- Energy efficiency -- Terminology 60.60 TC 205
ISO 18650-1:2004
Building construction machinery and equipment -- Concrete mixers -- Part 1: Vocabulary and general specifications 90.60 TC 195/SC 1
ISO/CD 29464
Cleaning equipment for air and other gases -- Terminology 30.60 TC 142
01.040.93 Civil engineering (Vocabularies)
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 6707-1:2004
Building and civil engineering -- Vocabulary -- Part 1: General terms 90.60 TC 59/SC 2
ISO 13473-2:2002
Characterization of pavement texture by use of surface profiles -- Part 2: Terminology and basic requirements related to pavement texture profile analysis 90.92 TC 43/SC 1
ISO/NP 13473-2
Characterization of pavement texture by use of surface profiles -- Part 2: Terminology and basic requirements related to pavement texture profile analysis 10.99 TC 43/SC 1
ISO 15642:2003
Road construction and maintenance equipment -- Asphalt mixing plants -- Terminology and commercial specifications 90.60 TC 195
ISO 15878:2008
Road construction and maintenance equipment -- Asphalt pavers -- Terminology and commercial specifications 60.60 TC 195
ISO 15878:2008/Cor 1:2008
60.60 TC 195
01.040.95 Military engineering (Vocabularies)
01.040.97 Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 4481:1977
Cutlery and flatware -- Nomenclature 90.60 TC 186
ISO 6289:2003
Skis -- Vocabulary 90.93 TC 83/SC 4
ISO 6289:2003/Cor 1:2005
90.93 TC 83/SC 4
ISO 7152:1997
Camping tents and caravan awnings -- Vocabulary and list of equivalent terms 90.60 TC 83/SC 2
ISO 7152:1997/Amd 1:2006
60.60 TC 83/SC 2
ISO 8229:1991
Operations and baths relating to dry-cleaning machines -- Vocabulary 90.93 TC 72/SC 5
ISO 8614:1997
Ski bindings -- Vocabulary 90.93 TC 83/SC 4
ISO 12756:1998
Drawing and writing instruments -- Ball point pens and roller ball pens -- Vocabulary 90.60 TC 10
ISO 23953-1:2005
Refrigerated display cabinets -- Part 1: Vocabulary 90.92 TC 86/SC 7
01.060 Quantities and units
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 31-0:1992
Quantities and units -- Part 0: General principles 90.92 TC 12
ISO 31-0:1992/Amd 1:1998
60.60 TC 12
ISO 31-0:1992/Amd 2:2005
60.60 TC 12
ISO 31-9:1992
Quantities and units -- Part 9: Atomic and nuclear physics 90.92 TC 12
ISO 31-9:1992/Amd 1:1998
60.60 TC 12
ISO 31-10:1992
Quantities and units -- Part 10: Nuclear reactions and ionizing radiations 90.92 TC 12
ISO 31-10:1992/Amd 1:1998
60.60 TC 12
ISO 31-11:1992
Quantities and units -- Part 11: Mathematical signs and symbols for use in the physical sciences and technology 90.92 TC 12
ISO 1000:1992
SI units and recommendations for the use of their multiples and of certain other units 90.92 TC 12
ISO 1000:1992/Amd 1:1998
60.60 TC 12
ISO 1151-1:1988
Flight dynamics -- Concepts, quantities and symbols -- Part 1: Aircraft motion relative to the air 90.60 TC 20
ISO 1151-2:1985
Flight dynamics -- Concepts, quantities and symbols -- Part 2: Motions of the aircraft and the atmosphere relative to the Earth 90.60 TC 20
ISO 1151-2:1985/Add 1:1987
60.60 TC 20
ISO 1151-3:1989
Flight dynamics -- Concepts, quantities and symbols -- Part 3: Derivatives of forces, moments and their coefficients 90.60 TC 20
ISO 1151-3:1989/Cor 1:1996
60.60 TC 20
ISO 1151-4:1994
Flight dynamics -- Concepts, quantities, and symbols -- Part 4: Concepts and quantities used in the study of aircraft stability and control 90.60 TC 20
ISO 1151-5:1987
Flight dynamics -- Concepts, quantities and symbols -- Part 5: Quantities used in measurements 90.60 TC 20
ISO 1151-6:1982
Terms and symbols for flight dynamics -- Part 6: Aircraft geometry 90.60 TC 20
ISO 1151-6:1982/Amd 1:1984
60.60 TC 20
ISO 1151-7:1985
Flight dynamics -- Concepts, quantities and symbols -- Part 7: Flight points and flight envelopes 90.60 TC 20
ISO 1151-8:1992
Flight dynamics -- Concepts, quantities and symbols -- Part 8: Concepts and quantities used in the study of the dynamic behaviour of the aircraft 90.60 TC 20
ISO 1151-9:1993
Flight dynamics -- Concepts, quantities and symbols -- Part 9: Models of atmospheric motions along the trajectory of the aircraft 90.60 TC 20
ISO 1151-9:1993/Amd 1:1998
Turbulence 60.60 TC 20
ISO 3002-1:1982
Basic quantities in cutting and grinding -- Part 1: Geometry of the active part of cutting tools -- General terms, reference systems, tool and working angles, chip breakers 90.93 TC 29
ISO 3002-1:1982/Amd 1:1992
60.60 TC 29
ISO 3002-2:1982
Basic quantities in cutting and grinding -- Part 2: Geometry of the active part of cutting tools -- General conversion formulae to relate tool and working angles 90.60 TC 29
ISO 3002-3:1984
Basic quantities in cutting and grinding -- Part 3: Geometric and kinematic quantities in cutting 90.60 TC 29
ISO 3002-4:1984
Basic quantities in cutting and grinding -- Part 4: Forces, energy, power 90.93 TC 29
ISO 3002-5:1989
Basic quantities in cutting and grinding -- Part 5: Basic terminology for grinding processes using grinding wheels 90.93 TC 29
ISO 4226:2007
Air quality -- General aspects -- Units of measurement 60.60 TC 146/SC 4
ISO 7345:1987
Thermal insulation -- Physical quantities and definitions 90.92 TC 163
ISO 9288:1989
Thermal insulation -- Heat transfer by radiation -- Physical quantities and definitions 90.20 TC 163
ISO 9346:2007
Hygrothermal performance of buildings and building materials -- Physical quantities for mass transfer -- Vocabulary 60.60 TC 163
ISO/FDIS 80000-1
Quantities and units -- Part 1: General 50.00 TC 12
ISO/FDIS 80000-2
Quantities and units -- Part 2: Mathematical signs and symbols to be used in the natural sciences and technology 50.00 TC 12
ISO 80000-3:2006
Quantities and units -- Part 3: Space and time 90.20 TC 12
ISO 80000-4:2006
Quantities and units -- Part 4: Mechanics 90.20 TC 12
ISO 80000-5:2007
Quantities and units -- Part 5: Thermodynamics 60.60 TC 12
IEC 80000-6:2008
Quantities and units -- Part 6: Electromagnetism 60.60 TC 12
ISO 80000-7:2008
Quantities and units -- Part 7: Light 60.60 TC 12
ISO 80000-8:2007
Quantities and units -- Part 8: Acoustics 60.60 TC 12
ISO 80000-9:2009
Quantities and units -- Part 9: Physical chemistry and molecular physics 60.60 TC 12
ISO/FDIS 80000-10
Quantities and units -- Part 10: Atomic and nuclear physics 50.00 TC 12
ISO 80000-11:2008
Quantities and units -- Part 11: Characteristic numbers 60.60 TC 12
ISO 80000-12:2009
Quantities and units -- Part 12: Solid state physics 60.60 TC 12
IEC 80000-13:2008
Quantities and units -- Part 13: Information science and technology 60.60 TC 12
IEC 80000-14:2008
Quantities and units -- Part 14: Telebiometrics related to human physiology 90.92 TC 12
IEC/NP 80003-1
Physiological quantities and their units -- Part 1: Modalities 10.99 TC 12
ISO/NP 80003-2
Physiological quantities and their units -- Part 2: Physics 10.99 TC 12
ISO/NP 80003-3
Physiological quantities and their units -- Part 3: Chemistry 10.99 TC 12
IEC/NP 80003-4
Physiological quantities and their units -- Part 4: Biology 10.99 TC 12
IEC/NP 80003-5
Physiological quantities and their units -- Part 5: Culturology 10.99 TC 12
IEC/NP 80003-6
Physiological quantities and their units -- Part 6: Psychology 10.99 TC 12
01.070 Colour coding
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 32:1977
Gas cylinders for medical use -- Marking for identification of content 90.93 TC 58/SC 4
ISO 1769:1975
Laboratory glassware -- Pipettes -- Colour coding 90.93 TC 48
ISO 2574:1994
Aircraft -- Electrical cables -- Identification marking 90.93 TC 20/SC 1
ISO 3864-2:2004
Graphical symbols -- Safety colours and safety signs -- Part 2: Design principles for product safety labels 90.93 TC 145/SC 2
ISO 6009:1992
Hypodermic needles for single use -- Colour coding for identification 90.93 TC 84
ISO 6009:1992/Cor 1:2008
60.60 TC 84
ISO 6217:1982
Shipbuilding -- Inland navigation -- Pilot craft -- Identification painting and inscriptions 90.93 TC 8/SC 11
ISO 7711-3:2004
Dentistry -- Diamond rotary instruments -- Part 3: Grit sizes, designation and colour code 90.93 TC 106/SC 4
ISO 8843:2005
Aircraft -- Crimp-removable contacts for electrical connectors -- Identification system 90.60 TC 20/SC 1
ISO 9095:1990
Steel tubes -- Continuous character marking and colour coding for material identification 90.93 TC 5/SC 1
ISO 9247:1990
Earth-moving machinery -- Electrical wires and cables -- Principles of identification and marking 90.93 TC 127/SC 3
ISO 9247:1990/Amd 1:1998
60.60 TC 127/SC 3
ISO 10243:1991
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding 90.92 TC 29/SC 8
ISO/DIS 10243
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding 40.60 TC 29/SC 8
ISO 10625:2005
Equipment for crop protection -- Sprayer nozzles -- Colour coding for identification 90.60 TC 23/SC 6
ISO 14726:2008
Ships and marine technology -- Identification colours for the content of piping systems 60.60 TC 8/SC 3
01.075 Character symbols
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 15241:2001
Rolling bearings -- Symbols for quantities 90.93 TC 4
01.080 Graphical symbols
ICS Field
01.080.01 Graphical symbols in general
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/IEC Guide 74:2004
Graphical symbols -- Technical guidelines for the consideration of consumers' needs 60.60 COPOLCO
ISO 3864-3:2006
Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols for use in safety signs 90.20 TC 145/SC 2
ISO/TR 10488:1991
Graphical symbols incorporating arrows -- Synopsis 60.60 TC 145
ISO 17724:2003
Graphical symbols -- Vocabulary 90.60 TC 145
ISO/DIS 81714-1
Design of graphical symbols for use in the technical documentation of products -- Part 1: Basic rules 40.60 TC 10/SC 10
ISO 81714-1:1999
Design of graphical symbols for use in the technical documentation of products -- Part 1: Basic rules 90.92 TC 10/SC 10
IEC 81714-2:2006
Design of graphical symbols for use in the technical documentation of products -- Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange 60.60 TC 10/SC 10
IEC 81714-3:2004
Design of graphical symbols for use in the technical documentation of products -- Part 3: Classification of connect nodes, networks and their encoding 60.60 TC 10/SC 10
01.080.10 Public information symbols
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/CD 3864-1
Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs and safety markings 30.60 TC 145/SC 2
ISO 3864-1:2002
Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs in workplaces and public areas 90.92 TC 145/SC 2
ISO 3864-2:2004
Graphical symbols -- Safety colours and safety signs -- Part 2: Design principles for product safety labels 90.93 TC 145/SC 2
ISO/CD 3864-4
Graphical symbols -- Safety colours and safety signs -- Part 4: Specification of colorimetric and photometric properties of materials 30.60 TC 145/SC 2
ISO 7001:2007
Graphical symbols -- Public information symbols 60.60 TC 145/SC 1
ISO 7010:2003
Graphical symbols -- Safety colours and safety signs -- Safety signs used in workplaces and public areas 90.92 TC 145/SC 2
ISO/CD 7010
Graphical symbols -- Safety colours and safety signs -- Registered safety signs 30.99 TC 145/SC 2
ISO 7010:2003/Amd 1:2006
60.60 TC 145/SC 2
ISO 7010:2003/Amd 2:2007
60.60 TC 145/SC 2
ISO 7010:2003/Amd 3:2007
60.60 TC 145/SC 2
ISO 7010:2003/Amd 4:2009
60.60 TC 145/SC 2
ISO 7010:2003/FDAmd 50
Safety sign M021: Disconnect before carrying out maintenance or repair 50.00 TC 145/SC 2
ISO 7010:2003/DAmd 55
Safety sign W023: Warning; Corrosive substance 40.60 TC 145/SC 2
ISO 7010:2003/DAmd 56
Safety sign W024: Warning; Danger of crushing hands 40.60 TC 145/SC 2
ISO 7010:2003/CD Amd 57
Safety sign W025: Warning; Counter rotating rollers 30.99 TC 145/SC 2
ISO 7010:2003/DAmd 59
Safety sign W027: Warning; Optical radiation 40.60 TC 145/SC 2
ISO 7010:2003/DAmd 60
Safety sign W028: Warning; Oxidizing substance 40.60 TC 145/SC 2
ISO 7010:2003/DAmd 61
Safety sign P012 -- No heavy load 40.20 TC 145/SC 2
ISO 7010:2003/CD Amd 62
Safety sign E014: Direction symbol (90° increments), emergency equipment 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 63
Safety sign E015: Direction symbol 45° (90° increments), emergency equipment 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 64
Safety sign F007: Direction symbol (90° increments), fire safety 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 65
Safety sign F008: Direction symbol 45° (90° increments), fire safety 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 66
Safety sign E016: Emergency window with escape ladder 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 67
Safety sign E017: Rescue window 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 68
Safety sign E018: Turn anticlockwise to open 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 69
Safety sign E019: Turn clockwise to open 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 70
Safety sign M024: Pedestrians must use this walkway 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 71
Safety sign P025: Do not use an incomplete scaffold 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 72
Safety sign P026: Do not use this device in a bathtub, shower or water-filled reservoir 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 73
Safety sign P027: Do not use this lift for people 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 74
Safety sign P028: Do not wear gloves 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 75
Safety sign P029: No photography 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 76
Safety sign W026: Warning; Battery recharging 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 77
Safety sign W029: Warning; Pressurized bottle 30.60 TC 145/SC 2
ISO 9186-1:2007
Graphical symbols -- Test methods -- Part 1: Methods for testing comprehensibility 60.60 TC 145/SC 1
ISO 9186-2:2008
Graphical symbols -- Test methods -- Part 2: Method for testing perceptual quality 60.60 TC 145/SC 1
ISO 16069:2004
Graphical symbols -- Safety signs -- Safety way guidance systems (SWGS) 90.93 TC 145/SC 2
ISO 17398:2004
Safety colours and safety signs -- Classification, performance and durability of safety signs 90.93 TC 145/SC 2
ISO 20712-1:2008
Water safety signs and beach safety flags -- Part 1: Specifications for water safety signs used in workplaces and public areas 60.60 TC 145/SC 2
ISO 20712-2:2007
Water safety signs and beach safety flags -- Part 2: Specifications for beach safety flags -- Colour, shape, meaning and performance 60.60 TC 145/SC 2
ISO 20712-3:2008
Water safety signs and beach safety flags -- Part 3: Guidance for use 60.60 TC 145/SC 2
ISO 22727:2007
Graphical symbols -- Creation and design of public information symbols -- Requirements 60.60 TC 145/SC 1
ISO 23601:2009
Safety identification -- Escape and evacuation plan signs 60.60 TC 145/SC 2
ISO/DIS 28564-1
Public information guidance systems -- Part 1: Design principles and element requirements for location plans, maps and diagrams 40.20 TC 145/SC 1
01.080.20 Graphical symbols for use on specific equipment
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 361:1975
Basic ionizing radiation symbol 90.93 TC 85
ISO/FDIS 369
Machine tools -- Symbols for indications appearing on machine tools 50.00 TC 39
ISO 2575:2004
Road vehicles -- Symbols for controls, indicators and tell-tales 90.92 TC 22/SC 13
ISO 2575:2004/Amd 1:2005
60.60 TC 22/SC 13
ISO 2575:2004/Amd 2:2006
60.60 TC 22/SC 13
ISO 2575:2004/Amd 3:2008
60.60 TC 22/SC 13
ISO 2575:2004/Amd 4:2009
60.60 TC 22/SC 13
ISO 2575:2004/DAmd 6
. 40.60 TC 22/SC 13
ISO 2972:1979
Numerical control of machines -- Symbols 90.93 TC 184/SC 1
ISO 3287:1999
Powered industrial trucks -- Symbols for operator controls and other displays 90.93 TC 110/SC 2
ISO 3719:1994
Mechanical vibration -- Symbols for balancing machines and associated instrumentation 90.93 TC 108
ISO 3767-1:1998
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 1: Common symbols 90.93 TC 23/SC 14
ISO 3767-1:1998/Amd 1:2008
Additional symbols 60.60 TC 23/SC 14
ISO 3767-2:2008
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 2: Symbols for agricultural tractors and machinery 60.60 TC 23/SC 14
ISO 3767-3:1995
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 3: Symbols for powered lawn and garden equipment 90.93 TC 23/SC 14
ISO 3767-4:1993
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 4: Symbols for forestry machinery 90.93 TC 23/SC 14
ISO 3767-4:1993/Amd 1:2000
Additional symbols 60.60 TC 23/SC 14
ISO 3767-4:1993/Amd 2:2008
Additional symbols 60.60 TC 23/SC 14
ISO 3767-5:1992
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 5: Symbols for manual portable forestry machinery 90.60 TC 23/SC 14
ISO 3767-5:1992/Amd 1:2001
Revised and additional symbols 60.60 TC 23/SC 14
ISO 3826-2:2008
Plastics collapsible containers for human blood and blood components -- Part 2: Graphical symbols for use on labels and instruction leaflets 60.60 TC 76
ISO 3864-2:2004
Graphical symbols -- Safety colours and safety signs -- Part 2: Design principles for product safety labels 90.93 TC 145/SC 2
ISO/CD 3864-4
Graphical symbols -- Safety colours and safety signs -- Part 4: Specification of colorimetric and photometric properties of materials 30.60 TC 145/SC 2
ISO/DIS 4129
Mopeds -- Symbols for controls, indicators and tell-tales 40.60 TC 22/SC 23
ISO 4129:1990
Mopeds -- Symbols for controls, indicators and tell-tales 90.92 TC 22/SC 23
ISO 5232:1998
Graphical symbols for textile machinery 90.60 TC 72/SC 9
ISO 6050:1987
Shipbuilding -- Bulbous bow and side thruster symbols 90.60 TC 8/SC 8
ISO 6405-1:2004
Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols 90.92 TC 127/SC 3
ISO 6405-1:2004/CD Amd 1
Earth-moving machinery -- Symbols for operator controls and other displays 30.99 TC 127/SC 3
ISO 6405-2:1993
Earth-moving machinery -- Symbols for operator controls and other displays -- Part 2: Specific symbols for machines, equipment and accessories 90.60 TC 127/SC 3
ISO 6405-2:1993/Amd 1:1997
60.60 TC 127/SC 3
ISO 6405-2:1993/Amd 2:2004
Additional symbols 60.60 TC 127/SC 3
ISO/DIS 6727
Road vehicles -- Motorcycles -- Symbols for controls, indicators and tell-tales 40.99 TC 22/SC 22
ISO 6727:1981
Road vehicles -- Motorcycles -- Symbols for controls, indicators and telltales 90.92 TC 22/SC 22
ISO 7000:2004
Graphical symbols for use on equipment -- Index and synopsis 90.60 TC 145/SC 3
ISO 7010:2003
Graphical symbols -- Safety colours and safety signs -- Safety signs used in workplaces and public areas 90.92 TC 145/SC 2
ISO/CD 7010
Graphical symbols -- Safety colours and safety signs -- Registered safety signs 30.99 TC 145/SC 2
ISO 7010:2003/Amd 1:2006
60.60 TC 145/SC 2
ISO 7010:2003/Amd 2:2007
60.60 TC 145/SC 2
ISO 7010:2003/Amd 3:2007
60.60 TC 145/SC 2
ISO 7010:2003/Amd 4:2009
60.60 TC 145/SC 2
ISO 7010:2003/FDAmd 50
Safety sign M021: Disconnect before carrying out maintenance or repair 50.00 TC 145/SC 2
ISO 7010:2003/DAmd 55
Safety sign W023: Warning; Corrosive substance 40.60 TC 145/SC 2
ISO 7010:2003/DAmd 56
Safety sign W024: Warning; Danger of crushing hands 40.60 TC 145/SC 2
ISO 7010:2003/CD Amd 57
Safety sign W025: Warning; Counter rotating rollers 30.99 TC 145/SC 2
ISO 7010:2003/DAmd 59
Safety sign W027: Warning; Optical radiation 40.60 TC 145/SC 2
ISO 7010:2003/DAmd 60
Safety sign W028: Warning; Oxidizing substance 40.60 TC 145/SC 2
ISO 7010:2003/DAmd 61
Safety sign P012 -- No heavy load 40.20 TC 145/SC 2
ISO 7010:2003/CD Amd 62
Safety sign E014: Direction symbol (90° increments), emergency equipment 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 63
Safety sign E015: Direction symbol 45° (90° increments), emergency equipment 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 64
Safety sign F007: Direction symbol (90° increments), fire safety 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 65
Safety sign F008: Direction symbol 45° (90° increments), fire safety 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 66
Safety sign E016: Emergency window with escape ladder 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 67
Safety sign E017: Rescue window 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 68
Safety sign E018: Turn anticlockwise to open 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 69
Safety sign E019: Turn clockwise to open 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 70
Safety sign M024: Pedestrians must use this walkway 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 71
Safety sign P025: Do not use an incomplete scaffold 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 72
Safety sign P026: Do not use this device in a bathtub, shower or water-filled reservoir 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 73
Safety sign P027: Do not use this lift for people 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 74
Safety sign P028: Do not wear gloves 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 75
Safety sign P029: No photography 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 76
Safety sign W026: Warning; Battery recharging 30.60 TC 145/SC 2
ISO 7010:2003/CD Amd 77
Safety sign W029: Warning; Pressurized bottle 30.60 TC 145/SC 2
ISO 7286:1986
Graphical symbols for resistance welding equipment 90.93 TC 44/SC 6
ISO 7287:2002
Graphical symbols for thermal cutting equipment 90.93 TC 44/SC 8
ISO 7296-1:1991
Cranes -- Graphic symbols -- Part 1: General 90.93 TC 96/SC 2
ISO 7296-1:1991/Amd 1:1996
60.60 TC 96/SC 6
ISO 7296-2:1996
Cranes -- Graphical symbols -- Part 2: Mobile cranes 90.20 TC 96/SC 6
ISO 7296-3:2006
Cranes -- Graphical symbols -- Part 3: Tower cranes 60.60 TC 96/SC 7
ISO 7639:1985
Road vehicles -- Diagnostic systems -- Graphical symbols 90.93 TC 22/SC 3
ISO 8999:2001
Reciprocating internal combustion engines -- Graphical symbols 90.60 TC 70
ISO 9031:1987
Air cargo equipment -- Handling systems for unit load devices (ULDs) -- Symbols for pictorial representation 90.93 TC 20/SC 9
ISO 9128:2006
Road vehicles -- Graphical symbols to designate brake fluid types 90.20 TC 22/SC 2
ISO 9244:2008
Earth-moving machinery -- Machine safety labels -- General principles 60.60 TC 127/SC 2
ISO 9687:1993
Dental equipment -- Graphical symbols 90.60 TC 106/SC 6
ISO 10284:1997
Cinematography -- Graphical symbols -- Description 90.93 TC 36
ISO 11192:2005
Small craft -- Graphical symbols 90.60 TC 188
ISO/CD 11532
Aerospace -- Ground equipment -- Graphical symbols for use on aircraft ground support equipment 30.99 TC 20/SC 9
ISO 11684:1995
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles 90.93 TC 23/SC 14
ISO 13200:1995
Cranes -- Safety signs and hazard pictorials -- General principles 90.93 TC 96/SC 6
ISO/IEC 13251:2004
Collection of graphical symbols for office equipment 90.20 JTC 1/SC 35
ISO 15223-1:2007
Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements 90.92 TC 210
ISO/DIS 15223-1
Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements 40.00 TC 210
ISO 15223-1:2007/Amd 1:2008
60.60 TC 210
ISO/DIS 15223-2.2
Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 2: Symbol development, selection and validation 40.60 TC 210
ISO/TR 15847:2008
Graphic technology -- Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment 60.60 TC 130
ISO 15870:2000
Powered industrial trucks -- Safety signs and hazard pictorials -- General principles 90.93 TC 110/SC 2
ISO 16069:2004
Graphical symbols -- Safety signs -- Safety way guidance systems (SWGS) 90.93 TC 145/SC 2
ISO 17080:2005
Manually portable agricultural and forestry machines and powered lawn and garden equipment -- Design principles for single-panel product safety labels 90.93 TC 23/SC 14
ISO 17398:2004
Safety colours and safety signs -- Classification, performance and durability of safety signs 90.93 TC 145/SC 2
ISO/FDIS 20381
Mobile elevating work platforms -- Symbols for operator controls and other displays 50.20 TC 214
ISO 21482:2007
Ionizing-radiation warning -- Supplementary symbol 60.60 TC 85/SC 2
ISO/CD 27185
Cardiac rhythm management devices -- Symbols to be used with cardiac rhythm management device labels, and information to be supplied -- General information 30.99 TC 150/SC 6
IEC 80416-1:2008
Basic principles for graphical symbols for use on equipment -- Part 1: Creation of graphical symbols for registration 60.60 TC 145/SC 3
ISO 80416-2:2001
Basic principles for graphical symbols for use on equipment -- Part 2: Form and use of arrows 90.20 TC 145/SC 3
IEC 80416-3:2002
Basic principles for graphical symbols for use on equipment -- Part 3: Guidelines for the application of graphical symbols 90.60 TC 145/SC 3
IEC 80416-3:2002/CD Amd 1
30.20 TC 145/SC 3
ISO 80416-4:2005
Basic principles for graphical symbols for use on equipment -- Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays (icons) 90.60 TC 145/SC 3
01.080.30 Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/R 538:1967
Conventional signs to be used in the schemes for the installations of pipeline systems in ships 90.93 TC 8/SC 3
ISO 561:1989
Coal preparation plant -- Graphical symbols 90.93 TC 27/SC 1
ISO/R 644:1967
Conventional signs to be used in schemes for the installations of ventilation systems in ships 60.60 TC 8/SC 3
ISO 701:1998
International gear notation -- Symbols for geometrical data 90.93 TC 60/SC 1
ISO 710-1:1974
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 1: General rules of representation 90.93 TC 82/SC 1
ISO 710-2:1974
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 2: Representation of sedimentary rocks 90.93 TC 82/SC 1
ISO 710-3:1974
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 3: Representation of magmatic rocks 90.93 TC 82/SC 1
ISO 710-4:1982
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 4: Representation of metamorphic rocks 90.60 TC 82/SC 1
ISO 710-5:1989
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 5: Representation of minerals 90.93 TC 82/SC 1
ISO 710-6:1984
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering 90.93 TC 82/SC 1
ISO 710-7:1984
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 7: Tectonic symbols 90.93 TC 82/SC 1
ISO/R 784:1968
Conventional signs to be used in schemes for the installations of sanitary systems in ships 60.60 TC 8/SC 3
ISO 1219-1:2006
Fluid power systems and components -- Graphic symbols and circuit diagrams -- Part 1: Graphic symbols for conventional use and data-processing applications 60.60 TC 131/SC 1
ISO 1219-2:1995
Fluid power systems and components -- Graphic symbols and circuit diagrams -- Part 2: Circuit diagrams 90.92 TC 131/SC 1
ISO/CD 1219-2
Fluid power systems and components -- Graphic symbols and circuit diagrams -- Part 2: Circuit diagrams 30.60 TC 131/SC 1
ISO 1964:1987
Shipbuilding -- Indication of details on the general arrangement plans of ships 90.60 TC 8/SC 8
ISO 3511-1:1977
Process measurement control functions and instrumentation -- Symbolic representation -- Part 1: Basic requirements 90.60 TC 10/SC 10
ISO 3511-2:1984
Process measurement control functions and instrumentation -- Symbolic representation -- Part 2: Extension of basic requirements 90.60 TC 10/SC 10
ISO 3511-3:1984
Process measurement control functions and instrumentation -- Symbolic representation -- Part 3: Detailed symbols for instrument interconnection diagrams 90.60 TC 10/SC 10
ISO 3511-4:1985
Industrial process measurement control functions and instrumentation -- Symbolic representation -- Part 4: Basic symbols for process computer, interface, and shared display/control functions 90.60 TC 10/SC 10
ISO 3952-1:1981
Kinematic diagrams -- Graphical symbols 90.93 TC 10/SC 6
ISO 3952-1:1981/Amd 1:2002
60.60 TC 10/SC 6
ISO 3952-2:1981
Kinematic diagrams -- Graphical symbols 90.93 TC 10/SC 6
ISO 3952-3:1979
Kinematic diagrams -- Graphical symbols 90.93 TC 10/SC 6
ISO 3952-4:1984
Kinematic diagrams -- Graphical symbols 90.93 TC 10/SC 6
ISO 4067-2:1980
Building and civil engineering drawings -- Installations -- Part 2: Simplified representation of sanitary appliances 90.93 TC 10/SC 8
ISO 5232:1998
Graphical symbols for textile machinery 90.60 TC 72/SC 9
ISO 5784-1:1988
Fluid power systems and components -- Fluid logic circuits -- Part 1: Symbols for binary logic and related functions 90.20 TC 131/SC 5
ISO 5784-2:1989
Fluid power systems and components -- Fluid logic circuits -- Part 2: Symbols for supply and exhausts as related to logic symbols 90.20 TC 131/SC 5
ISO 5784-3:1989
Fluid power systems and components -- Fluid logic circuits -- Part 3: Symbols for logic sequencers and related functions 90.20 TC 131/SC 5
ISO 5859:1991
Aerospace -- Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components 90.60 TC 20/SC 10
ISO 6790:1986
Equipment for fire protection and fire fighting -- Graphical symbols for fire protection plans -- Specification 90.93 TC 21
ISO 9878:1990
Micrographics -- Graphical symbols for use in microfilming 60.60 TC 171/SC 2
ISO 10628:1997
Flow diagrams for process plants -- General rules 90.92 TC 10/SC 10
ISO/CD 10628-2
Diagrams for chemical and petrochemical industry -- Part 2: Graphical symbols 30.60 TC 10/SC 10
ISO/TR 12343:1997
Road vehicles -- Symbols for electrotechnical diagrams 60.60 TC 22/SC 3
ISO/NP 12671
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings 10.99 TC 107
ISO 14617-1:2005
Graphical symbols for diagrams -- Part 1: General information and indexes 90.60 TC 10/SC 10
ISO 14617-2:2002
Graphical symbols for diagrams -- Part 2: Symbols having general application 90.60 TC 10/SC 10
ISO 14617-3:2002
Graphical symbols for diagrams -- Part 3: Connections and related devices 90.60 TC 10/SC 10
ISO 14617-4:2002
Graphical symbols for diagrams -- Part 4: Actuators and related devices 90.60 TC 10/SC 10
ISO 14617-5:2002
Graphical symbols for diagrams -- Part 5: Measurement and control devices 90.60 TC 10/SC 10
ISO 14617-6:2002
Graphical symbols for diagrams -- Part 6: Measurement and control functions 90.60 TC 10/SC 10
ISO 14617-7:2002
Graphical symbols for diagrams -- Part 7: Basic mechanical components 90.60 TC 10/SC 10
ISO 14617-8:2002
Graphical symbols for diagrams -- Part 8: Valves and dampers 90.60 TC 10/SC 10
ISO 14617-9:2002
Graphical symbols for diagrams -- Part 9: Pumps, compressors and fans 90.60 TC 10/SC 10
ISO 14617-10:2002
Graphical symbols for diagrams -- Part 10: Fluid power converters 90.60 TC 10/SC 10
ISO 14617-11:2002
Graphical symbols for diagrams -- Part 11: Devices for heat transfer and heat engines 90.60 TC 10/SC 10
ISO 14617-12:2002
Graphical symbols for diagrams -- Part 12: Devices for separating, purification and mixing 90.60 TC 10/SC 10
ISO 14617-13:2004
Graphical symbols for diagrams -- Part 13: Devices for material processing 90.60 TC 10/SC 10
ISO 14617-14:2004
Graphical symbols for diagrams -- Part 14: Devices for transport and handling of material 90.60 TC 10/SC 10
ISO 14617-15:2002
Graphical symbols for diagrams -- Part 15: Installation diagrams and network maps 90.60 TC 10/SC 10
ISO 15081:2005
Agricultural irrigation equipment -- Graphical symbols for pressurized irrigation systems 90.92 TC 23/SC 18
ISO/NP 15081
Agricultural irrigation equipment -- Graphical symbols for pressurized irrigation systems 10.99 TC 23/SC 18
ISO/DIS 15519-1
Specification for diagrams for process industry -- Part 1: General rules 40.60 TC 10/SC 10
ISO/FDIS 17338
Ships and marine technology -- Drawings for fire protection -- Indications of fire rating by divisions for ships and high-speed craft 50.20 TC 8/SC 1
ISO 19018:2004
Ships and marine technology -- Terms, abbreviations, graphical symbols and concepts on navigation 90.93 TC 8/SC 6
01.080.40 Graphical symbols for use on electrical and electronics engineering drawings, diagrams, charts and in relevant technical product documentation
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 11145:2006
Optics and photonics -- Lasers and laser-related equipment -- Vocabulary and symbols 90.20 TC 172/SC 9
01.080.50 Graphical symbols for use on information technology and telecommunications technical drawings and in relevant technical product documentation
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 5807:1985
Information processing -- Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts 90.93 JTC 1/SC 7
ISO 8790:1987
Information processing systems -- Computer system configuration diagram symbols and conventions 90.93 JTC 1/SC 7
ISO/IEC 15416:2000
Information technology -- Automatic identification and data capture techniques -- Bar code print quality test specification -- Linear symbols 90.93 JTC 1/SC 31
ISO/IEC 15417:2007
Information technology -- Automatic identification and data capture techniques -- Code 128 bar code symbology specification 60.60 JTC 1/SC 31
ISO/IEC 15420:2000
Information technology -- Automatic identification and data capture techniques -- Bar code symbology specification -- EAN/UPC 90.92 JTC 1/SC 31
ISO/IEC FCD 15420.2
Information technology -- Automatic identification and data capture techniques -- EAN/UPC bar code symbology specification 40.60 JTC 1/SC 31
ISO/IEC 15424:2008
Information technology -- Automatic identification and data capture techniques -- Data Carrier Identifiers (including Symbology Identifiers) 60.60 JTC 1/SC 31
ISO/IEC 16022:2006
Information technology -- Automatic identification and data capture techniques -- Data Matrix bar code symbology specification 90.20 JTC 1/SC 31
ISO/IEC 16022:2006/Cor 1:2008
60.60 JTC 1/SC 31
ISO/IEC 16023:2000
Information technology -- International symbology specification -- MaxiCode 90.93 JTC 1/SC 31
ISO/IEC 16388:2007
Information technology -- Automatic identification and data capture techniques -- Code 39 bar code symbology specification 60.60 JTC 1/SC 31
ISO/IEC 16390:2007
Information technology -- Automatic identification and data capture techniques -- Interleaved 2 of 5 bar code symbology specification 60.60 JTC 1/SC 31
ISO/IEC 18004:2006
Information technology -- Automatic identification and data capture techniques -- QR Code 2005 bar code symbology specification 60.60 JTC 1/SC 31
ISO/IEC 18004:2006/Cor 1:2009
60.60 JTC 1/SC 31
ISO/IEC TR 19765:2007
Information technology -- Survey of icons and symbols that provide access to functions and facilities to improve the use of information technology products by the elderly and persons with disabilities 60.60 JTC 1/SC 35
ISO/IEC TR 19766:2007
Information technology -- Guidelines for the design of icons and symbols accessible to all users, including the elderly and persons with disabilities 60.60 JTC 1/SC 35
ISO/IEC TR 19782:2006
Information technology -- Automatic identification and data capture techniques -- Effects of gloss and low substrate opacity on reading of bar code symbols 90.93 JTC 1/SC 31
ISO/IEC 24723:2006
Information technology -- Automatic identification and data capture techniques -- EAN.UCC Composite bar code symbology specification 90.92 JTC 1/SC 31
ISO/IEC FCD 24723
Information technology -- Automatic identification and data capture techniques -- EAN.UCC Composite bar code symbology specification 40.20 JTC 1/SC 31
ISO/IEC FCD 24724
Information technology -- Automatic identification and data capture techniques -- Reduced Space Symbology (RSS) bar code symbology specification 40.20 JTC 1/SC 31
ISO/IEC 24724:2006
Information technology -- Automatic identification and data capture techniques -- Reduced Space Symbology (RSS) bar code symbology specification 90.92 JTC 1/SC 31
ISO/IEC WD 24779-1
Pictograms, Icons and Symbols for use with Biometric Systems -- Part 1: Overview 20.60 JTC 1/SC 37
ISO/IEC WD 24779-2
Pictograms, Icons and Symbols for use with Biometric Systems -- Part 2: Fingerprint applications 20.60 JTC 1/SC 37
01.080.99 Other graphical symbols
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 780:1997
Packaging -- Pictorial marking for handling of goods 90.60 TC 122
ISO 1951:2007
Presentation/representation of entries in dictionaries -- Requirements, recommendations and information 60.60 TC 37/SC 2
ISO 6309:1987
Fire protection -- Safety signs 90.93 TC 21
ISO 15223:2000
Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied 90.92 TC 210
ISO 15223:2000/Amd 1:2002
60.60 TC 210
ISO 15223:2000/Amd 2:2004
60.60 TC 210
ISO 21531:2009
Dentistry -- Graphical symbols for dental instruments 60.60 TC 106/SC 4
ISO 22742:2005
Packaging -- Linear bar code and two-dimensional symbols for product packaging 90.92 TC 122
ISO/CD 22742
Packaging -- Linear bar code and two-dimensional symbols for product packaging 30.60 TC 122
01.100 Technical drawings
Computer-aided design, see 35.240.10
Graphical symbols for use on technical drawings, see 01.080.30
ICS Field
01.100.01 Technical drawings in general
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 128-1:2003
Technical drawings -- General principles of presentation -- Part 1: Introduction and index 90.93 TC 10/SC 1
ISO 128-20:1996
Technical drawings -- General principles of presentation -- Part 20: Basic conventions for lines 90.93 TC 10/SC 1
ISO 128-21:1997
Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systems 90.60 TC 10/SC 1
ISO 128-22:1999
Technical drawings -- General principles of presentation -- Part 22: Basic conventions and applications for leader lines and reference lines 90.93 TC 10/SC 1
ISO 128-30:2001
Technical drawings -- General principles of presentation -- Part 30: Basic conventions for views 90.93 TC 10/SC 1
ISO 128-40:2001
Technical drawings -- General principles of presentation -- Part 40: Basic conventions for cuts and sections 90.93 TC 10/SC 1
ISO 128-50:2001
Technical drawings -- General principles of presentation -- Part 50: Basic conventions for representing areas on cuts and sections 90.93 TC 10/SC 1
ISO/CD 129-1
Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles 30.60 TC 10/SC 1
ISO 129-1:2004
Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles 90.92 TC 10/SC 1
ISO 3098-0:1997
Technical product documentation -- Lettering -- Part 0: General requirements 90.93 TC 10/SC 1
ISO 3098-2:2000
Technical product documentation -- Lettering -- Part 2: Latin alphabet, numerals and marks 90.93 TC 10/SC 1
ISO 3098-3:2000
Technical product documentation -- Lettering -- Part 3: Greek alphabet 90.93 TC 10/SC 1
ISO 3098-4:2000
Technical product documentation -- Lettering -- Part 4: Diacritical and particular marks for the Latin alphabet 90.93 TC 10/SC 1
ISO 3098-5:1997
Technical product documentation -- Lettering -- Part 5: CAD lettering of the Latin alphabet, numerals and marks 90.60 TC 10/SC 1
ISO 3098-6:2000
Technical product documentation -- Lettering -- Part 6: Cyrillic alphabet 90.93 TC 10/SC 1
ISO 3272-1:2003
Microfilming of technical drawings and other drawing office documents -- Part 1: Operating procedures 90.93 TC 171/SC 2
ISO 3272-1:2003/Cor 1:2009
60.60 TC 171/SC 2
ISO 3272-2:1994
Microfilming of technical drawings and other drawing office documents -- Part 2: Quality criteria and control of 35 mm silver gelatin microfilms 90.93 TC 171/SC 2
ISO 3272-3:2001
Microfilming of technical drawings and other drawing office documents -- Part 3: Aperture card for 35 mm microfilm 90.93 TC 171/SC 2
ISO 3272-4:1994
Microfilming of technical drawings and other drawing office documents -- Part 4: Microfilming of drawings of special and exceptional elongated sizes 90.60 TC 171/SC 2
ISO 3272-6:2000
Microfilming of technical drawings and other drawing office documents -- Part 6: Quality criteria and control of systems for enlargements from 35 mm microfilm 90.93 TC 171/SC 2
ISO 5455:1979
Technical drawings -- Scales 90.93 TC 10/SC 1
ISO 5456-1:1996
Technical drawings -- Projection methods -- Part 1: Synopsis 90.93 TC 10/SC 1
SO 5456-2:1996
Technical drawings -- Projection methods -- Part 2: Orthographic representations 90.93 TC 10/SC 1
ISO 5456-3:1996
Technical drawings -- Projection methods -- Part 3: Axonometric representations 90.93 TC 10/SC 1
ISO 5456-4:1996
Technical drawings -- Projection methods -- Part 4: Central projection 90.93 TC 10/SC 1
ISO 5457:1999
Technical product documentation -- Sizes and layout of drawing sheets 90.20 TC 10/SC 1
ISO 5457:1999/DAmd 1
40.20 TC 10/SC 1
ISO 6428:1982
Technical drawings -- Requirements for microcopying 90.93 TC 10/SC 1
ISO 6433:1981
Technical drawings -- Item references 90.92 TC 10/SC 1
ISO 10209-1:1992
Technical product documentation -- Vocabulary -- Part 1: Terms relating to technical drawings: general and types of drawings 90.92 TC 10/SC 1
ISO 10209-2:1993
Technical product documentation -- Vocabulary -- Part 2: Terms relating to projection methods 90.92 TC 10/SC 1
ISO/CD TR 23605
Technical product specification (TPS) -- Application guidance -- International model for national implementation 30.99 TC 213
01.100.20 Mechanical engineering drawings
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 128-24:1999
Technical drawings -- General principles of presentation -- Part 24: Lines on mechanical engineering drawings 90.60 TC 10/SC 6
ISO 128-25:1999
Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings 90.93 TC 10/SC 6
ISO 128-34:2001
Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings 90.60 TC 10/SC 6
ISO 128-44:2001
Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings 90.93 TC 10/SC 6
ISO/CD TS 128-71
Technical drawings -- General principles of presentation -- Part 71: Simplified representation for mechanical engineering 30.60 TC 10/SC 6
ISO 1101:2004
Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out 90.60 TC 213
ISO 1101:2004/DAmd 1
Representation of specifications in the form of a 3D model 40.99 TC 213
ISO 1302:2002
Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation 90.93 TC 213
ISO 1302:2002/CD Amd 2
Indication of bearing ration requirements 30.99 TC 213
ISO 1660:1987
Technical drawings -- Dimensioning and tolerancing of profiles 90.93 TC 213
ISO 2162-1:1993
Technical product documentation -- Springs -- Part 1: Simplified representation 90.93 TC 10/SC 6
ISO 2162-2:1993
Technical product documentation -- Springs -- Part 2: Presentation of data for cylindrical helical compression springs 90.93 TC 227
ISO 2162-3:1993
Technical product documentation -- Springs -- Part 3: Vocabulary 90.92 TC 227
ISO 2203:1973
Technical drawings -- Conventional representation of gears 90.93 TC 10/SC 6
ISO 2553:1992
Welded, brazed and soldered joints -- Symbolic representation on drawings 90.92 TC 44/SC 7
ISO/CD 2553-1
Welding and allied processes -- Symbolic representation on drawings -- Part 1: Welding 30.60 TC 44/SC 7
ISO 2692:2006
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) 60.60 TC 213
ISO 3040:1990
Technical drawings -- Dimensioning and tolerancing -- Cones 90.92 TC 213
ISO/FDIS 3040
Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones 50.00 TC 213
ISO 5261:1995
Technical drawings -- Simplified representation of bars and profile sections 90.93 TC 10/SC 1
ISO 5459:1981
Technical drawings -- Geometrical tolerancing -- Datums and datum-systems for geometrical tolerances 90.92 TC 213
ISO/DIS 5459.3
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Datums and datum-systems 40.93 TC 213
ISO/TR 5460:1985
Technical drawings -- Geometrical tolerancing -- Tolerancing of form, orientation, location and run-out -- Verification principles and methods -- Guidelines 90.20 TC 213
ISO 5845-1:1995
Technical drawings -- Simplified representation of the assembly of parts with fasteners -- Part 1: General principles 90.20 TC 10/SC 6
ISO 5845-2:1995
Technical drawings -- Simplified representation of the assembly of parts with fasteners -- Part 2: Rivets for aerospace equipment 90.20 TC 10/SC 6
ISO 6410-1:1993
Technical drawings -- Screw threads and threaded parts -- Part 1: General conventions 90.93 TC 10/SC 6
ISO 6410-2:1993
Technical drawings -- Screw threads and threaded parts -- Part 2: Screw thread inserts 90.93 TC 10/SC 6
ISO 6410-3:1993
Technical drawings -- Screw threads and threaded parts -- Part 3: Simplified representation 90.93 TC 10/SC 6
ISO 6411:1982
Technical drawings -- Simplified representation of centre holes 90.93 TC 10/SC 6
ISO 6413:1988
Technical drawings -- Representation of splines and serrations 90.93 TC 10/SC 6
ISO 7083:1983
Technical drawings -- Symbols for geometrical tolerancing -- Proportions and dimensions 90.60 TC 10/SC 10
ISO 8015:1985
Technical drawings -- Fundamental tolerancing principle 90.93 TC 213
ISO 8826-1:1989
Technical drawings -- Rolling bearings -- Part 1: General simplified representation 90.93 TC 10/SC 6
ISO 8826-2:1994
Technical drawings -- Rolling bearings -- Part 2: Detailed simplified representation 90.93 TC 10/SC 6
ISO 9222-1:1989
Technical drawings -- Seals for dynamic application -- Part 1: General simplified representation 90.93 TC 10/SC 6
ISO 9222-2:1989
Technical drawings -- Seals for dynamic application -- Part 2: Detailed simplified representation 90.93 TC 10/SC 6
ISO 10110-1:2006
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 1: General 90.60 TC 172/SC 1
ISO 10110-2:1996
Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 2: Material imperfections -- Stress birefringence 90.93 TC 172/SC 1
ISO 10110-3:1996
Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 3: Material imperfections -- Bubbles and inclusions 90.93 TC 172/SC 1
ISO 10110-4:1997
Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 4: Material imperfections -- Inhomogeneity and striae 90.93 TC 172/SC 1
ISO 10110-5:2007
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 5: Surface form tolerances 60.60 TC 172/SC 1
ISO 10110-6:1996
Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 6: Centring tolerances 90.93 TC 172/SC 1
ISO 10110-6:1996/Cor 1:1999
60.60 TC 172/SC 1
ISO 10110-7:2008
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 7: Surface imperfection tolerances 60.60 TC 172/SC 1
ISO 10110-8:1997
Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 8: Surface texture 90.92 TC 172/SC 1
ISO/DIS 10110-8
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 8: Surface texture 40.20 TC 172/SC 1
ISO 10110-9:1996
Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 9: Surface treatment and coating 90.93 TC 172/SC 1
ISO 10110-10:2004
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 10: Table representing data of optical elements and cemented assemblies 90.93 TC 172/SC 1
ISO 10110-11:1996
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 11: Non-toleranced data 90.93 TC 172/SC 1
ISO 10110-11:1996/Cor 1:2006
60.60 TC 172/SC 1
ISO 10110-12:2007
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 12: Aspheric surfaces 60.60 TC 172/SC 1
ISO 10110-14:2007
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 14: Wavefront deformation tolerance 60.60 TC 172/SC 1
ISO 10110-17:2004
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 17: Laser irradiation damage threshold 90.93 TC 172/SC 1
ISO 10135:2007
Geometrical product specifications (GPS) -- Drawing indications for moulded parts in technical product documentation (TPD) 60.60 TC 213
ISO 10578:1992
Technical drawings -- Tolerancing of orientation and location -- Projected tolerance zone 90.93 TC 213
ISO 10579:1993
Technical drawings -- Dimensioning and tolerancing -- Non-rigid parts 90.93 TC 213
ISO/WD 13444
Technical drawings -- Dimensioning and indication of knurling 20.99 TC 10/SC 6
ISO 13715:2000
Technical drawings -- Edges of undefined shape -- Vocabulary and indications 90.20 TC 10/SC 6
ISO 14660-1:1999
Geometrical Product Specifications (GPS) -- Geometrical features -- Part 1: General terms and definitions 90.93 TC 213
ISO 14660-2:1999
Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature 90.93 TC 213
ISO/CD 14660-3
Geometrical Product Specifications (GPS) -- Geometrical features -- Part 3: Extracted centre of a sphere 30.99 TC 213
ISO 15785:2002
Technical drawings -- Symbolic presentation and indication of adhesive, fold and pressed joints 90.93 TC 10/SC 6
ISO 15786:2008
Technical drawings -- Simplified representation and dimensioning of holes 60.60 TC 10/SC 6
ISO 15787:2001
Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications 90.93 TC 10/SC 6
01.100.25 Electrical and electronics engineering drawings
Including electrical tables, diagrams and charts
01.100.27 Technical drawings for telecommunications and information technology fields
01.100.30 Construction drawings
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 128-23:1999
Technical drawings -- General principles of presentation -- Part 23: Lines on construction drawings 90.93 TC 10/SC 8
ISO 2594:1972
Building drawings -- Projection methods 90.93 TC 10/SC 8
ISO 3766:2003
Construction drawings -- Simplified representation of concrete reinforcement 90.60 TC 10/SC 8
ISO 4067-2:1980
Building and civil engineering drawings -- Installations -- Part 2: Simplified representation of sanitary appliances 90.93 TC 10/SC 8
ISO 4157-1:1998
Construction drawings -- Designation systems -- Part 1: Buildings and parts of buildings 90.60 TC 10/SC 8
ISO 4157-2:1998
Construction drawings -- Designation systems -- Part 2: Room names and numbers 90.60 TC 10/SC 8
ISO 4157-3:1998
Construction drawings -- Designation systems -- Part 3: Room identifiers 90.60 TC 10/SC 8
ISO 4172:1991
Technical drawings -- Construction drawings -- Drawings for the assembly of prefabricated structures 90.93 TC 10/SC 8
ISO 6284:1996
Construction drawings -- Indication of limit deviations 90.93 TC 10/SC 8
ISO 7437:1990
Technical drawings -- Construction drawings -- General rules for execution of production drawings for prefabricated structural components 90.93 TC 10/SC 8
ISO 7518:1983
Technical drawings -- Construction drawings -- Simplified representation of demolition and rebuilding 90.60 TC 10/SC 8
ISO 7519:1991
Technical drawings -- Construction drawings -- General principles of presentation for general arrangement and assembly drawings 90.93 TC 10/SC 8
ISO 8048:1984
Technical drawings -- Construction drawings -- Representation of views, sections and cuts 90.92 TC 10/SC 8
ISO 8560:1986
Technical drawings -- Construction drawings -- Representation of modular sizes, lines and grids 90.93 TC 10/SC 8
ISO 9431:1990
Construction drawings -- Spaces for drawing and for text, and title blocks on drawing sheets 90.93 TC 10/SC 8
ISO 10209-4:1999
Technical product documentation -- Vocabulary -- Part 4: Terms relating to construction documentation 90.92 TC 10/SC 8
ISO 11091:1994
Construction drawings -- Landscape drawing practice 90.93 TC 10/SC 8
Including civil engineering drawings
01.100.40 Drawing equipment
01.100.99 Other standards related to technical drawings
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 6412-1:1989
Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation 90.93 TC 10/SC 10
ISO 6412-2:1989
Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric projection 90.93 TC 10/SC 10
ISO 6412-3:1993
Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems 90.60 TC 10/SC 10
ISO 6414:1982
Technical drawings for glassware 90.93 TC 10/SC 6
01.110 Technical product documentation
01.120 Standardization. General rules
Including rules for the preparation of standards catalogues and management of technical documents
Including rules for preparation of user guides, manuals, product specifications, etc.
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO/CD 6433
Technical product documentation -- Part references 30.99 TC 10/SC 1
ISO 7200:2004
Technical product documentation -- Data fields in title blocks and document headers 90.60 TC 10/SC 1
ISO 7573:2008
Technical product documentation -- Parts lists 60.60 TC 10/SC 1
ISO/CD 10209
Technical product documentation -- Vocabulary -- Terms relating to technical drawings, product definition and relted products 30.99 TC 10
ISO 10209-4:1999
Technical product documentation -- Vocabulary -- Part 4: Terms relating to construction documentation 90.92 TC 10/SC 8
ISO/CD 11005
Technical product documentation -- Use of main documents 30.60 TC 10/SC 1
ISO 11442:2006
Technical product documentation -- Document management 90.20 TC 10/SC 1
ISO 13567-1:1998
Technical product documentation -- Organization and naming of layers for CAD -- Part 1: Overview and principles 90.60 TC 10/SC 8
ISO 13567-2:1998
Technical product documentation -- Organization and naming of layers for CAD -- Part 2: Concepts, format and codes used in construction documentation 90.60 TC 10/SC 8
ISO/TR 13567-3:1999
Technical product documentation -- Organization and naming of layers for CAD -- Part 3: Application of ISO 13567-1 and ISO 13567-2 90.93 TC 10/SC 8
ISO 15226:1999
Technical product documentation -- Life cycle model and allocation of documents 90.93 TC 10/SC 1
ISO/DIS 15519-1
Specification for diagrams for process industry -- Part 1: General rules 40.60 TC 10/SC 10
ISO 16016:2000
Technical product documentation -- Protection notices for restricting the use of documents and products 90.93 TC 10/SC 1
ISO 16792:2006
Technical product documentation -- Digital product definition data practices 60.60 TC 10
ISO/TS 16952-1:2006
Technical product documentation -- Reference designation system -- Part 1: General application rules 90.20 TC 10/SC 10
ISO/TS 16952-10:2008
Technical product documentation -- Reference designation system -- Part 10: Power plants 60.60 TC 10/SC 10
ISO/TR 19033:2000
Technical product documentation -- Metadata for construction documentation 90.93 TC 10/SC 8
ISO/CD 29845
Technical product documentation -- Document types 30.60 TC 10/SC 1
ISO 81714-1:1999
Design of graphical symbols for use in the technical documentation of products -- Part 1: Basic rules 90.92 TC 10/SC 10
ISO/DIS 81714-1
Design of graphical symbols for use in the technical documentation of products -- Part 1: Basic rules 40.60 TC 10/SC 10
26IEC 81714-2:2006
Design of graphical symbols for use in the technical documentation of products -- Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange 60.60 TC 10/SC 10
29IEC 81714-3:2004
Design of graphical symbols for use in the technical documentation of products -- Part 3: Classification of connect nodes, networks and their encoding 60.60 TC 10/SC 10
30IEC 82045-1:2001
Document management -- Part 1: Principles and methods 90.93 TC 10
31IEC 82045-2:2004
Document management -- Part 2: Metadata elements and information reference model 60.60 TC 10
ISO 82045-5:2005
Document management -- Part 5: Application of metadata for the construction and facility management sector 90.60 TC 10/SC 8
01.140 Information sciences. Publishing
Information technology applications in information, documentation and publishing, see 35.240.30
ICS Field
01.140.10 Writing and transliteration
Coded character sets for bibliographic information interchange, see 35.040
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 9:1995
Information and documentation -- Transliteration of Cyrillic characters into Latin characters -- Slavic and non-Slavic languages 90.60 TC 46
ISO 233:1984
Documentation -- Transliteration of Arabic characters into Latin characters 90.60 TC 46
ISO 233-2:1993
Information and documentation -- Transliteration of Arabic characters into Latin characters -- Part 2: Arabic language -- Simplified transliteration 90.60 TC 46
ISO 233-3:1999
Information and documentation -- Transliteration of Arabic characters into Latin characters -- Part 3: Persian language -- Simplified transliteration 90.93 TC 46
ISO 259:1984
Documentation -- Transliteration of Hebrew characters into Latin characters 90.60 TC 46
ISO 259-2:1994
Information and documentation -- Transliteration of Hebrew characters into Latin characters -- Part 2: Simplified transliteration 90.60 TC 46
ISO 843:1997
Information and documentation -- Conversion of Greek characters into Latin characters 90.93 TC 46
ISO 3602:1989
Documentation -- Romanization of Japanese (kana script) 90.60 TC 46
ISO 7098:1991
Information and documentation -- Romanization of Chinese 90.60 TC 46
ISO 9984:1996
Information and documentation -- Transliteration of Georgian characters into Latin characters 90.93 TC 46
ISO 9985:1996
Information and documentation -- Transliteration of Armenian characters into Latin characters 90.60 TC 46
ISO 11940:1998
Information and documentation -- Transliteration of Thai 90.60 TC 46
ISO 11940-2:2007
Information and documentation -- Transliteration of Thai characters into Latin characters -- Part 2: Simplified transcription of Thai language 60.60 TC 46
ISO/TR 11941:1996
Information and documentation -- Transliteration of Korean script into Latin characters 60.60 TC 46
ISO 15919:2001
Information and documentation -- Transliteration of Devanagari and related Indic scripts into Latin characters 90.60 TC 46
ISO 15924:2004
Information and documentation -- Codes for the representation of names of scripts 90.60 TC 46
ISO/DIS 24614-1
Language resource management -- Word segmentation of written texts for monolingual and multilingual information processing -- Part 1: Basic concepts and general principles 40.20 TC 37/SC 4
ISO/WD 24614-2
Language resource management -- Word segmentation of written texts for monolingual and multilingual information processing -- Part 2: Word segmentation for Chinese, Japanese and Korean 20.99 TC 37/SC 4
01.140.20 Information sciences
Including documentation, librarianship and archive systems
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 214:1976
Documentation -- Abstracts for publications and documentation 90.93 TC 46
ISO 215:1986
Documentation -- Presentation of contributions to periodicals and other serials 90.60 TC 46
ISO 639-1:2002
Codes for the representation of names of languages -- Part 1: Alpha-2 code 90.60 TC 37/SC 2
ISO 639-2:1998
Codes for the representation of names of languages -- Part 2: Alpha-3 code 90.60 TC 37/SC 2
ISO 639-3:2007
Codes for the representation of names of languages -- Part 3: Alpha-3 code for comprehensive coverage of languages 60.60 TC 37/SC 2
ISO/DIS 639-4.2
Codes for the representation of names of languages -- Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines 40.99 TC 37/SC 2
ISO 639-5:2008
Codes for the representation of names of languages -- Part 5: Alpha-3 code for language families and groups 60.60 TC 37/SC 2
ISO/FDIS 639-6
Codes for the representation of names of languages -- Part 6: Alpha-4 code for comprehensive coverage of language variants 50.00 TC 37/SC 2
ISO/DIS 690
Information and documentation -- Guidelines for bibliographic references and citations to information resources 40.60 TC 46/SC 9
ISO 690:1987
Documentation -- Bibliographic references -- Content, form and structure 90.92 TC 46/SC 9
ISO 690-2:1997
Information and documentation -- Bibliographic references -- Part 2: Electronic documents or parts thereof 90.92 TC 46/SC 9
ISO 832:1994
Information and documentation -- Bibliographic description and references -- Rules for the abbreviation of bibliographic terms 90.93 TC 46/SC 9
ISO 2108:2005
Information and documentation -- International standard book number (ISBN) 90.93 TC 46/SC 9
ISO/DIS 2146
Information and documentation -- Registry services for libraries and related organizations 40.60 TC 46/SC 4
ISO 2788:1986
Documentation -- Guidelines for the establishment and development of monolingual thesauri 90.60 TC 46/SC 9
ISO 2789:2006
Information and documentation -- International library statistics 60.60 TC 46/SC 8
ISO 3297:2007
Information and documentation -- International standard serial number (ISSN) 60.60 TC 46/SC 9
ISO 3901:2001
Information and documentation -- International Standard Recording Code (ISRC) 90.92 TC 46/SC 9
ISO/NP 3901
Information and documentation -- International Standard Recording Code (ISRC) 10.99 TC 46/SC 9
ISO 4087:2005
Micrographics -- Microfilming of newspapers for archival purposes on 35 mm microfilm 90.93 TC 171/SC 2
ISO 5122:1979
Documentation -- Abstract sheets in serial publications 90.60 TC 46
ISO 5123:1984
Documentation -- Headers for microfiche of monographs and serials 90.60 TC 46
ISO 5127:2001
Information and documentation -- Vocabulary 90.60 TC 46
ISO 5963:1985
Documentation -- Methods for examining documents, determining their subjects, and selecting indexing terms 90.93 TC 46/SC 9
ISO 5964:1985
Documentation -- Guidelines for the establishment and development of multilingual thesauri 90.60 TC 46/SC 9
ISO 7154:1983
Documentation -- Bibliographic filing principles 90.93 TC 46
ISO 7220:1996
Information and documentation -- Presentation of catalogues of standards 90.60 TC 46
ISO 7220:1996/Cor 1:2001
60.60 TC 46/SC 9
ISO/TR 8393:1985
Documentation -- ISO bibliographic filing rules (International Standard Bibliographic Filing Rules) -- Exemplification of Bibliographic filing principles in a model set of rules 60.60 TC 46
ISO 9230:2007
Information and documentation -- Determination of price indexes for print and electronic media purchased by libraries 60.60 TC 46/SC 8
ISO 9707:2008
Information and documentation -- Statistics on the production and distribution of books, newspapers, periodicals and electronic publications 60.60 TC 46/SC 8
ISO 10324:1997
Information and documentation -- Holdings statements -- Summary level 90.60 TC 46/SC 9
ISO 10957:1993
Information and documentation -- International standard music number (ISMN) 90.93 TC 46/SC 9
ISO/PRF 10957
Information and documentation -- International standard music number (ISMN) 50.00 TC 46/SC 9
ISO 11108:1996
Information and documentation -- Archival paper -- Requirements for permanence and durability 90.93 TC 46
ISO 11620:2008
Information and documentation -- Library performance indicators 60.60 TC 46/SC 8
ISO 11798:1999
Information and documentation -- Permanence and durability of writing, printing and copying on paper -- Requirements and test methods 90.60 TC 46
ISO 11799:2003
Information and documentation -- Document storage requirements for archive and library materials 90.60 TC 46
ISO/AWI 13008
Digital records conversion and migration process 20.00 TC 46/SC 11
ISO/CD TR 13028
Information and documentation - Implementation guidelines for digitisation of records 30.60 TC 46/SC 11
ISO/AWI TR 13069
Information and documentation -- Risk assessment for records systems 20.00 TC 46/SC 11
ISO 15489-1:2001
Information and documentation -- Records management -- Part 1: General 90.93 TC 46/SC 11
ISO/TR 15489-2:2001
Information and documentation -- Records management -- Part 2: Guidelines 90.93 TC 46/SC 11
ISO 15706-1:2002/Amd 1:2008
Alternate encodings and editorial changes 60.60 TC 46/SC 9
ISO 15706-1:2002
Information and documentation -- International Standard Audiovisual Number (ISAN) -- Part 1: Audiovisual work identifier 90.93 TC 46/SC 9
ISO 15706-2:2007
Information and documentation -- International Standard Audiovisual Number (ISAN) -- Part 2: Version identifier 60.60 TC 46/SC 9
ISO 15707:2001
Information and documentation -- International Standard Musical Work Code (ISWC) 90.93 TC 46/SC 9
ISO 15924:2004
Information and documentation -- Codes for the representation of names of scripts 90.60 TC 46
ISO/DIS 16245
Information and documentation -- Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents 40.99 TC 46
ISO/AWI TR 19934
Information and documentation -- Statistics for the use of electronic library services 20.00 TC 46/SC 8
ISO 21047:2009
Information and documentation -- International Standard Text Code (ISTC) 60.60 TC 46/SC 9
ISO/TR 21449:2004
Content Delivery and Rights Management: Functional requirements for identifiers and descriptors for use in the music, film, video, sound recording and publishing industries 60.60 TC 46/SC 9
ISO 22310:2006
Information and documentation -- Guidelines for standards drafters for stating records management requirements in standards 90.20 TC 46/SC 11
ISO 23081-1:2006
Information and documentation -- Records management processes -- Metadata for records -- Part 1: Principles 90.20 TC 46/SC 11
ISO/TS 23081-2:2007
Information and documentation -- Records management processes -- Metadata for records -- Part 2: Conceptual and implementation issues 90.92 TC 46/SC 11
ISO 23081-2
Information and documentation -- Managing metadata for records -- Part 2: Conceptual and implementation issues 60.00 TC 46/SC 11
ISO 24610-1:2006
Language resource management -- Feature structures -- Part 1: Feature structure representation 90.92 TC 37/SC 4
ISO/WD 24610-1
Language resource management -- Feature structures -- Part 1: Feature structure representation 20.99 TC 37/SC 4
ISO/DIS 24610-2
Language resource management -- Feature structures -- Part 2: Feature system declaration 40.99 TC 37/SC 4
ISO/CD 24619
Language Resource Management - Persistent identification and access in language technology application 30.60 TC 37/SC 4
ISO/CD 25964-1
Information and documentation -- Thesauri and interoperability with other vocabularies -- Part 1: Thesauri for information retrieval 30.60 TC 46/SC 9
ISO/TR 26122:2008
Information and documentation -- Work process analysis for records 60.60 TC 46/SC 11
ISO/TR 26122:2008/Cor 1:2009
60.60 TC 46/SC 11
ISO/CD 26324
Information and documentation -- Digital object identifer system 30.99 TC 46/SC 9
ISO/CD 27729
Information and documentation - International Standard Name Identifier (ISNI) 30.99 TC 46/SC 9
ISO/CD 27730
Information and documentation -- International standard collection identifier (ISCI) 30.60 TC 46/SC 9
ISO/TR 28118:2009
Information and documentation -- Performance indicators for national libraries 60.60 TC 46/SC 8
01.140.30 Documents in administration, commerce and industry
Banking documents, see 03.060
Electronic data interchange (EDI), see 35.240.60
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 838:1974
Paper -- Holes for general filing purposes -- Specifications 90.93 TC 6
ISO 3166-1:2006
Codes for the representation of names of countries and their subdivisions -- Part 1: Country codes 60.60 TC 46
ISO 3166-1:2006/Cor 1:2007
60.60 TC 46
ISO 3166-2:2007
Codes for the representation of names of countries and their subdivisions -- Part 2: Country subdivision code 60.60 TC 46
ISO 3166-3:1999
Codes for the representation of names of countries and their subdivisions -- Part 3: Code for formerly used names of countries 90.93 TC 46
ISO 4217:2008
Codes for the representation of currencies and funds 60.60 TC 68/SC 7
ISO 4217:2008/Cor 1:2008
60.60 TC 68/SC 7
ISO 6422:1985
Layout key for trade documents 90.93 TC 154
ISO 7372:2005
Trade data interchange -- Trade data elements directory 90.60 TC 154
ISO 8439:1990
Forms design -- Basic layout 90.93 TC 154
ISO 8440:1986
Location of codes in trade documents 90.93 TC 154
ISO 8440:1986/Cor 1:2000
90.93 TC 154
ISO 8601:2004
Data elements and interchange formats -- Information interchange -- Representation of dates and times 90.60 TC 154
Technical product documentation, see 01.110
01.140.40 Publishing
Electronic publishing, see 35.240.30
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 4:1997
Information and documentation -- Rules for the abbreviation of title words and titles of publications 90.60 TC 46/SC 9
ISO 8:1977
Documentation -- Presentation of periodicals 90.93 TC 46
ISO 18:1981
Documentation -- Contents list of periodicals 90.60 TC 46
ISO 999:1996
Information and documentation -- Guidelines for the content, organization and presentation of indexes 90.93 TC 46/SC 9
ISO 1086:1991
Information and documentation -- Title leaves of books 90.60 TC 46
ISO 2145:1978
Documentation -- Numbering of divisions and subdivisions in written documents 90.93 TC 46
ISO 2384:1977
Documentation -- Presentation of translations 90.60 TC 46
ISO 6357:1985
Documentation -- Spine titles on books and other publications 90.60 TC 46
ISO 7144:1986
Documentation -- Presentation of theses and similar documents 90.60 TC 46
ISO 7275:1985
Documentation -- Presentation of title information of series 90.60 TC 46
ISO 9706:1994
Information and documentation -- Paper for documents -- Requirements for permanence 90.93 TC 46
ISO 11800:1998
Information and documentation -- Requirements for binding materials and methods used in the manufacture of books 90.60 TC 46
ISO 14416:2003
Information and documentation -- Requirements for binding of books, periodicals, serials and other paper documents for archive and library use -- Methods and materials 90.60 TC 46
http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment