Wednesday, July 22, 2009

Lastest & Cheapest ISO Standards In PDF (47)

http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.

ICS Field
Part 1605: Application module: AP210 assembly functional requirements 60.60 TC 184/SC 4
ISO/TS 10303-1606:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1606: Application module: AP210 assembly physical design 60.60 TC 184/SC 4
ISO/TS 10303-1607:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1607: Application module: AP210 assembly physical interface requirements 60.60 TC 184/SC 4
ISO/TS 10303-1608:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1608: Application module: AP210 assembly physical requirements 60.60 TC 184/SC 4
ISO/TS 10303-1609:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1609: Application module: AP210 assembly requirement allocation 60.60 TC 184/SC 4
ISO/TS 10303-1610:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1610: Application module: AP210 assembly technology constraints 60.60 TC 184/SC 4
ISO/TS 10303-1611:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1611: Application module: AP210 connection zone based model extraction 60.60 TC 184/SC 4
ISO/TS 10303-1612:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1612: Application module: AP210 device functional and physical characterization 60.60 TC


184/SC 4
ISO/TS 10303-1613:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1613: Module d'application: Physical unit non planar design view 60.60 TC 184/SC 4
ISO/TS 10303-1614:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1614: Application module: AP210 functional decomposition 60.60 TC 184/SC 4
ISO/TS 10303-1615:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1615: Application module: AP210 functional requirement allocation 60.60 TC 184/SC 4
ISO/TS 10303-1616:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1616: Application module: AP210 functional specification 60.60 TC 184/SC 4
ISO/TS 10303-1617:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1617: Application module: AP210 interconnect design 60.60 TC 184/SC 4
ISO/TS 10303-1618:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1618: Application module: AP210 interconnect design for microwave 60.60 TC 184/SC 4
ISO/TS 10303-1619:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1619: Application module: AP210 interconnect functional requirements 60.60 TC 184/SC 4
ISO/TS 10303-1620:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1620: Application module: AP210 interconnect physical requirements 60.60 TC 184/SC 4
ISO/TS 10303-1621:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1621: Application module: AP210 interconnect requirement allocation 60.60 TC 184/SC 4
ISO/TS 10303-1622:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1622: Application module: AP210 interconnect technology constraints 60.60 TC 184/SC 4
ISO/TS 10303-1623:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1623: Application module: AP210 laminate assembly design 60.60 TC 184/SC 4
ISO/TS 10303-1624:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1624: Application module: AP210 package functional and physical characterization 60.60 TC


184/SC 4
ISO/TS 10303-1625:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1625: Application module: AP210 packaged part white box model 60.60 TC 184/SC 4
ISO/TS 10303-1626:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1626: Application module: AP210 physical unit physical characterization 60.60 TC 184/SC 4
ISO/TS 10303-1627:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1627: Application module: AP210 printed part functional and physical characterization


60.60 TC 184/SC 4
ISO/TS 10303-1628:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1628: Application module: Design product data management 60.60 TC 184/SC 4
ISO/TS 10303-1630:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1630: Application module: AP210 product rule 60.60 TC 184/SC 4
ISO/TS 10303-1631:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1631: Application module: Area 2D 60.60 TC 184/SC 4
ISO/TS 10303-1632:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1632: Application module: Assembly 2D shape 60.60 TC 184/SC 4
ISO/TS 10303-1633:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1633: Application module: Assembly 3D shape 60.60 TC 184/SC 4
ISO/TS 10303-1634:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1634: Application module: Assembly component placement requirements 60.60 TC 184/SC 4
ISO/TS 10303-1635:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1635: Application module: Assembly functional interface requirement 60.60 TC 184/SC 4
ISO/TS 10303-1636:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1636: Application module: Assembly module design 60.60 TC 184/SC 4
ISO/TS 10303-1637:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1637: Application module: Assembly module macro definition 60.60 TC 184/SC 4
ISO/TS 10303-1638:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1638: Application module: Assembly module with cable component 2D 60.60 TC 184/SC 4
ISO/TS 10303-1639:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1639: Application module: Assembly module with cable component 3D 60.60 TC 184/SC 4
ISO/TS 10303-1640:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1640: Application module: Assembly module with macro component 60.60 TC 184/SC 4
ISO/TS 10303-1641:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1641: Application module: Assembly module with subassembly 60.60 TC 184/SC 4
ISO/TS 10303-1642:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1642: Application module: Assembly module usage view 60.60 TC 184/SC 4
ISO/TS 10303-1643:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1643: Application module: Assembly module with interconnect component 60.60 TC 184/SC 4
ISO/TS 10303-1644:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1644: Application module: Assembly module with cable component 60.60 TC 184/SC 4
ISO/TS 10303-1645:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1645: Application module: Assembly module with packaged connector component 60.60 TC


184/SC 4
ISO/TS 10303-1646:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1646: Application module: Footprint definition 60.60 TC 184/SC 4
ISO/TS 10303-1647:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1647: Application module: Assembly physical interface requirement 60.60 TC 184/SC 4
ISO/TS 10303-1648:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1648: Application module: Assembly physical requirement allocation 60.60 TC 184/SC 4
ISO/TS 10303-1649:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1649: Application module: Assembly technology 60.60 TC 184/SC 4
ISO/TS 10303-1650:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1650: Application module: Bare die 60.60 TC 184/SC 4
ISO/TS 10303-1651:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1651: Application module: Basic curve 60.60 TC 184/SC 4
ISO/TS 10303-1652:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1652: Application module: Basic geometry 60.60 TC 184/SC 4
ISO/TS 10303-1653:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1653: Application module: Cable 60.60 TC 184/SC 4
ISO/TS 10303-1654:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1654: Application module: Characteristic 60.60 TC 184/SC 4
ISO/TS 10303-1655:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1655: Application module: Chemical substance 60.60 TC 184/SC 4
ISO/TS 10303-1656:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1656: Application module: Component grouping 60.60 TC 184/SC 4
ISO/TS 10303-1657:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1657: Application module: Component feature 60.60 TC 184/SC 4
ISO/TS 10303-1658:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1658: Application module: Connectivity allocation to physical network 60.60 TC 184/SC 4
ISO/TS 10303-1659:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1659: Application module: Curve swept solid 60.60 TC 184/SC 4
ISO/TS 10303-1660:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1660: Application module: Datum difference based model 60.60 TC 184/SC 4
ISO/TS 10303-1661:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1661: Application module: Design management 60.60 TC 184/SC 4
ISO/TS 10303-1662:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1662: Application module: Design specific assignment to assembly usage view 60.60 TC


184/SC 4
ISO/TS 10303-1663:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1663: Application module: Design specific assignment to interconnect usage view 60.60 TC


184/SC 4
ISO/TS 10303-1664:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1664: Application module: Device marking 60.60 TC 184/SC 4
ISO/TS 10303-1665:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1665: Applciation module: Electrical network definition 60.60 TC 184/SC 4
ISO/TS 10303-1666:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1666: Application module: Extended geometric tolerance 60.60 TC 184/SC 4
ISO/TS 10303-1667:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1667: Application module: Extended basic geometry 60.60 TC 184/SC 4
ISO/TS 10303-1668:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1668: Application module: Fabrication joint 60.60 TC 184/SC 4
ISO/TS 10303-1669:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1669: Application module: Fabrication requirement 60.60 TC 184/SC 4
ISO/TS 10303-1670:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1670: Application module: Fabrication technology 60.60 TC 184/SC 4
ISO/TS 10303-1671:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1671: Application module: Feature and connection zone 60.60 TC 184/SC 4
ISO/TS 10303-1672:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1672: Application module: Fill area style 60.60 TC 184/SC 4
ISO/TS 10303-1673:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1673: Application module: Edge shape feature 60.60 TC 184/SC 4
ISO/TS 10303-1674:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1674: Application module: Functional assignment to part 60.60 TC 184/SC 4
ISO/TS 10303-1675:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1675: Application module: Functional decomposition to assembly design 60.60 TC 184/SC 4
ISO/TS 10303-1676:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1676: Application module: Functional decomposition to design 60.60 TC 184/SC 4
ISO/TS 10303-1677:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1677: Application module: Functional decomposition to interconnect design 60.60 TC 184/SC


4
ISO/TS 10303-1678:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1678: Application module: Functional decomposition with nodal representation to packaged


mapping 60.60 TC 184/SC 4
ISO/TS 10303-1679:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1679: Application module: Functional specification 60.60 TC 184/SC 4
ISO/TS 10303-1680:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1680: Application module: Functional unit requirement allocation 60.60 TC 184/SC 4
ISO/TS 10303-1681:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1681: Application module: Generic material aspects 60.60 TC 184/SC 4
ISO/TS 10303-1682:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1682: Application module: Interconnect 2D shape 60.60 TC 184/SC 4
ISO/TS 10303-1684:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1684: Application module: Interconnect module connection routing 60.60 TC 184/SC 4
ISO/TS 10303-1685:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1685: Application module: Interconnect module to assembly module relationship 60.60 TC


184/SC 4
ISO/TS 10303-1686:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1686: Application module: Interconnect module usage view 60.60 TC 184/SC 4
ISO/TS 10303-1687:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1687: Application module: Interconnect module with macros 60.60 TC 184/SC 4
ISO/TS 10303-1688:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1688: Application module: Interconnect non planar shape 60.60 TC 184/SC 4
ISO/TS 10303-1689:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1689: Application module: Interconnect physical requirement allocation 60.60 TC 184/SC 4
ISO/TS 10303-1690:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1690: Application module: Interconnect placement requirements 60.60 TC 184/SC 4
ISO/TS 10303-1691:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1691: Application module: Interface component 60.60 TC 184/SC 4
ISO/TS 10303-1692:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1692: Application module: Land 60.60 TC 184/SC 4
ISO/TS 10303-1693:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1693: Application module: Layered 2D shape 60.60 TC 184/SC 4
ISO/TS 10303-1694:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1694: Application module: Layered 3D shape 60.60 TC 184/SC 4
ISO/TS 10303-1695:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1695: Application module: Layered interconnect module 2D design 60.60 TC 184/SC 4
ISO/TS 10303-1696:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1696: Application module: Layered interconnect module 3D design 60.60 TC 184/SC 4
ISO/TS 10303-1698:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1698: Application module: Layered interconnect module design 60.60 TC 184/SC 4
ISO/TS 10303-1700:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1700: Application module: Layered interconnect module with printed component design 60.60


TC 184/SC 4
ISO/TS 10303-1701:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1701: Application module: Layout macro definition 60.60 TC 184/SC 4
ISO/TS 10303-1702:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1702: Application module: Manifold subsurface 60.60 TC 184/SC 4
ISO/TS 10303-1703:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1703: Application module: Model parameter 60.60 TC 184/SC 4
ISO/TS 10303-1704:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1704: Application module: Network functional design view 60.60 TC 184/SC 4
ISO/TS 10303-1705:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1705: Application module: Functional usage view 60.60 TC 184/SC 4
ISO/TS 10303-1706:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1706: Application module: Non feature shape element 60.60 TC 184/SC 4
ISO/TS 10303-1707:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1707: Application module: Package 60.60 TC 184/SC 4
ISO/TS 10303-1708:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1708: Application module: Packaged connector model 60.60 TC 184/SC 4
ISO/TS 10303-1709:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1709: Application module: Packaged part white box model 60.60 TC 184/SC 4
ISO/TS 10303-1710:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1710: Application module: Packaged part black box model 60.60 TC 184/SC 4
ISO/TS 10303-1711:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1711: Application module: Part external reference 60.60 TC 184/SC 4
ISO/TS 10303-1712:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1712: Application module: Part feature function 60.60 TC 184/SC 4
ISO/TS 10303-1713:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1713: Application module: Part feature grouping 60.60 TC 184/SC 4
ISO/TS 10303-1714:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1714: Application module: Part feature location 60.60 TC 184/SC 4
ISO/TS 10303-1715:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1715: Application module: Part occurrence 60.60 TC 184/SC 4
ISO/TS 10303-1716:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1716: Application module: Part template 2D shape 60.60 TC 184/SC 4
ISO/TS 10303-1717:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1717: Application module: Part template 3D shape 60.60 TC 184/SC 4
ISO/TS 10303-1718:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1718: Application module: Part template extension 60.60 TC 184/SC 4
ISO/TS 10303-1719:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1719: Application module: Part template non planar shape 60.60 TC 184/SC 4
ISO/TS 10303-1720:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1720: Application module: Part template shape with parameters 60.60 TC 184/SC 4
ISO/TS 10303-1721:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1721: Application module: Physical component feature 60.60 TC 184/SC 4
ISO/TS 10303-1722:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1722: Application module: Physical layout template 60.60 TC 184/SC 4
ISO/TS 10303-1723:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1723: Application module: Physical node requirement to implementing component allocation


60.60 TC 184/SC 4
ISO/TS 10303-1724:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1724: Application module: Physical unit 2D design view 60.60 TC 184/SC 4
ISO/TS 10303-1725:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1725: Application module: Physical unit 3D design view 60.60 TC 184/SC 4
ISO/TS 10303-1726:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1726: Application module: Physical unit 2D shape 60.60 TC 184/SC 4
ISO/TS 10303-1727:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1727: Application module: Physical unit 3D shape 60.60 TC 184/SC 4
ISO/TS 10303-1728:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1728: Application module: Physical unit design view 60.60 TC 184/SC 4
ISO/TS 10303-1729:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1729: Application module: Physical unit interconnect definition 60.60 TC 184/SC 4
ISO/TS 10303-1730:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1730: Application module: Physical unit shape with parameters 60.60 TC 184/SC 4
ISO/TS 10303-1731:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1731: Application module: Constructive solid geometry 2D 60.60 TC 184/SC 4
ISO/TS 10303-1732:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1732: Application module: Physical unit usage view 60.60 TC 184/SC 4
ISO/TS 10303-1733:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1733: Application module: Planned characteristic 60.60 TC 184/SC 4
ISO/TS 10303-1734:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1734: Application module: Pre defined datum symbol 60.60 TC 184/SC 4
ISO/TS 10303-1735:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1735: Application module: Pre defined datum 2D symbol 60.60 TC 184/SC 4
ISO/TS 10303-1736:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1736: Application module: Pre defined datum 3D symbol 60.60 TC 184/SC 4
ISO/TS 10303-1737:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1737: Application module: Printed physical layout template 60.60 TC 184/SC 4
ISO/TS 10303-1738:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1738: Application module: Product identification extension 60.60 TC 184/SC 4
ISO/TS 10303-1739:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1739: Application module: Production rule 60.60 TC 184/SC 4
ISO/TS 10303-1740:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1740: Application module: Requirement decomposition 60.60 TC 184/SC 4
ISO/TS 10303-1741:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1741: Application module: Sequential laminate assembly design 60.60 TC 184/SC 4
ISO/TS 10303-1742:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1742: Application module: Shape composition 60.60 TC 184/SC 4
ISO/TS 10303-1743:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1743: Application module: Shape parameters 60.60 TC 184/SC 4
ISO/TS 10303-1744:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1744: Application module: Discrete shield 60.60 TC 184/SC 4
ISO/TS 10303-1745:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1745: Application module: Signal 60.60 TC 184/SC 4
ISO/TS 10303-1746:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1746: Application module: Software 60.60 TC 184/SC 4
ISO/TS 10303-1747:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1747: Application module: Specification document 60.60 TC 184/SC 4
ISO/TS 10303-1748:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1748: Application module: Stratum non planar shape 60.60 TC 184/SC 4
ISO/TS 10303-1749:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1749: Application module: Styled curve 60.60 TC 184/SC 4
ISO/TS 10303-1750:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1750: Application module: Text representation 60.60 TC 184/SC 4
ISO/TS 10303-1751:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1751: Application module: Test requirement allocation 60.60 TC 184/SC 4
ISO/TS 10303-1752:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1752: Application module: Thermal network definition 60.60 TC 184/SC 4
ISO/TS 10303-1753:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1753: Application module: Value with unit extension 60.60 TC 184/SC 4
ISO/TS 10303-1754:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1754: Application module: Via component 60.60 TC 184/SC 4
ISO/TS 10303-1755:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1755: Application module: Physical connectivity definition 60.60 TC 184/SC 4
ISO/TS 10303-1756:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1756: Application module: Conductivity material aspects 60.60 TC 184/SC 4
ISO/TS 10303-1757:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1757: Application module: Test select product 60.60 TC 184/SC 4
ISO/TS 10303-1759:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1759: Application module: AP210 datum difference based model definition 60.60 TC 184/SC 4
ISO/TS 10303-1760:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1760: Application module: Pre defined product data management specializations 60.60 TC


184/SC 4
ISO/TS 10303-1761:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1761: Application module: Information product 60.60 TC 184/SC 4
ISO/TS 10303-1762:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1762: Application module: Generic product occurrence 60.60 TC 184/SC 4
ISO/TS 10303-1763:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1763: Application module: Integral shield 60.60 TC 184/SC 4
ISO/TS 10303-1764:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1764: Application module: Shape feature 60.60 TC 184/SC 4
ISO/TS 10303-1765:2006
Industrial automation systems and integration -- Product data representation and exchange --


Part 1765: Application module: Characterizable object 60.60 TC 184/SC 4
ISO/TS 10303-1767:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1767: Application module: Composite constituent shape 60.60 TC 184/SC 4
ISO/TS 10303-1768:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1768: Application module: Composite material aspects 60.60 TC 184/SC 4
ISO/TS 10303-1770:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1770: Application module: Part and zone laminate tables 60.60 TC 184/SC 4
ISO/TS 10303-1771:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1771: Application module: Stock material 60.60 TC 184/SC 4
ISO/TS 10303-1772:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1772: Application module: Ply orientation specification 60.60 TC 184/SC 4
ISO/TS 10303-1773:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1773: Application module: Basic data representation 60.60 TC 184/SC 4
ISO/TS 10303-1775:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1775: Application module: Currency 60.60 TC 184/SC 4
ISO/TS 10303-1776:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1776: Application module: Extended date 60.60 TC 184/SC 4
ISO/TS 10303-1777:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1777: Application module: External currency 60.60 TC 184/SC 4
ISO/TS 10303-1778:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1778: Application module: External library 60.60 TC 184/SC 4
ISO/TS 10303-1779:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1779: Application module: External representation item 60.60 TC 184/SC 4
ISO/TS 10303-1780:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1780: Application module: External unit 60.60 TC 184/SC 4
ISO/TS 10303-1782:2008
Industrial automation systems and integration -- Product data representation and exchange --


Part 1782: Application module: Qualified measure 60.60 TC 184/SC 4
ISO/CD TS 10303-1784
Industrial automation systems and integration -- Product data representation and exchange --


Part 1784: Application module: External analysis representation 30.99 TC 184/SC 4
ISO/CD 10303-1785
Industrial automation systems and integration -- Product data representation and exchange --


Part 1785: Application module: Analysis representation 30.99 TC 184/SC 4
ISO/TR 10314-1:1990
Industrial automation -- Shop floor production -- Part 1: Reference model for standardization


and a methodology for identification of requirements 60.60 TC 184/SC 5
ISO/TR 10314-2:1991
Industrial automation -- Shop floor production -- Part 2: Application of the reference model


for standardization and methodology 60.60 TC 184/SC 5
ISO 13281:1997
Industrial automation systems -- Manufacturing Automation Programming Environment (MAPLE) --


Functional architecture 90.60 TC 184/SC 5
ISO 13281-2:2000
Industrial automation systems and integration -- Manufacturing Automation Programming


Environment (MAPLE) -- Part 2: Services and interfaces 90.93 TC 184/SC 5
ISO 13584-1:2001
Industrial automation systems and integration -- Parts library -- Part 1: Overview and


fundamental principles 90.93 TC 184/SC 4
ISO 13584-20:1998
Industrial automation systems and integration -- Parts library -- Part 20: Logical resource:


Logical model of expressions 90.93 TC 184/SC 4
ISO 13584-24:2003
Industrial automation systems and integration -- Parts library -- Part 24: Logical resource:


Logical model of supplier library 90.60 TC 184/SC 4
ISO 13584-25:2004
Industrial automation systems and integration -- Parts library -- Part 25: Logical resource:


Logical model of supplier library with aggregate values and explicit content 90.60 TC 184/SC 4
ISO 13584-26:2000
Industrial automation systems and integration -- Parts library -- Part 26: Logical resource:


Information supplier identification 90.93 TC 184/SC 4
ISO 13584-26:2000/Amd 1:2007
60.60 TC 184/SC 4
ISO 13584-31:1999
Industrial automation systems and integration -- Parts library -- Part 31: Implementation


resources: Geometric programming interface 90.20 TC 184/SC 4
ISO/DIS 13584-32
Industrial automation systems and integration -- Parts library -- Part 32: Implementation


resources: OntoML: Ontology markup language 40.60 TC 184/SC 4
ISO/CD TS 13584-35
Industrial automation systems and integration -- Parts library -- Part 35: Implementation


resources: Spreadsheet data interface for parts library 30.99 TC 184/SC 4
ISO/DIS 13584-42
Industrial automation systems and integration -- Parts library -- Part 42: Description


methodology: Methodology for structuring part families 40.60 TC 184/SC 4
ISO 13584-42:1998
Industrial automation systems and integration -- Parts library -- Part 42: Description


methodology: Methodology for structuring part families 90.92 TC 184/SC 4
ISO 13584-42:1998/Cor 1:2003
60.60 TC 184/SC 4
ISO 13584-101:2003
Industrial automation systems and integration -- Parts library -- Part 101: Geometrical view


exchange protocol by parametric program 90.93 TC 184/SC 4
ISO 13584-102:2006
Industrial automation systems and integration -- Parts library -- Part 102: View exchange


protocol by ISO 10303 conforming specification 60.60 TC 184/SC 4
ISO 13584-501:2007
Industrial automation systems and integration -- Parts library -- Part 501: Reference


dictionary for measuring instruments -- Registration procedure 60.60 TC 184/SC 4
ISO 13584-511:2006
Industrial automation systems and integration -- Parts library -- Part 511: Mechanical systems


and components for general use -- Reference dictionary for fasteners 60.60 TC 184/SC 4
ISO 14258:1998/Cor 1:2000
60.60 TC 184/SC 5
ISO 15531-1:2004
Industrial automation systems and integration -- Industrial manufacturing management data --


Part 1: General overview 90.60 TC 184/SC 4
ISO 15531-31:2004
Industrial automation systems and integration -- Industrial manufacturing management data --


Part 31: Resource information model 90.60 TC 184/SC 4
ISO 15531-32:2005
Industrial automation systems and integration -- Industrial manufacturing management data:


Resources usage management -- Part 32: Conceptual model for resources usage management data


90.93 TC 184/SC 4
ISO 15531-42:2005
Industrial automation systems and integration -- Industrial manufacturing management data --


Part 42: Time Model 90.93 TC 184/SC 4
ISO 15531-43:2006
Industrial automation systems and integration -- Industrial manufacturing management data --


Part 43: Manufacturing flow management data: Data model for flow monitoring and manufacturing


data exchange 60.60 TC 184/SC 4
ISO/CD 15531-44
Industrial automation systems and integration -- Industrial manufacturing management data --


Part 44: Manufacturing management information modelling for shop floor data acquisition 30.99


TC 184/SC 4
ISO 15745-1:2003
Industrial automation systems and integration -- Open systems application integration framework


-- Part 1: Generic reference description 90.93 TC 184/SC 5
ISO 15745-1:2003/Amd 1:2007
60.60 TC 184/SC 5
ISO 15745-2:2003
Industrial automation systems and integration -- Open systems application integration framework


-- Part 2: Reference description for ISO 11898-based control systems 90.60 TC 184/SC 5
ISO 15745-3:2003
Industrial automation systems and integration -- Open systems application integration framework


-- Part 3: Reference description for IEC 61158-based control systems 90.60 TC 184/SC 5
ISO 15745-4:2003
Industrial automation systems and integration -- Open systems application integration framework


-- Part 4: Reference description for Ethernet-based control systems 90.60 TC 184/SC 5
ISO 15745-4:2003/Amd 1:2006
PROFINET profiles 60.60 TC 184/SC 5
ISO 15745-4:2003/Amd 2:2007
Profiles for Modbus TCP, EtherCAT and ETHERNET Powerlink 60.60 TC 184/SC 5
ISO 15745-5:2007
Industrial automation systems and integration -- Open systems application integration framework


-- Part 5: Reference description for HDLC-based control systems 60.60 TC 184/SC 5
ISO 15926-1:2004
Industrial automation systems and integration -- Integration of life-cycle data for process


plants including oil and gas production facilities -- Part 1: Overview and fundamental


principles 90.60 TC 184/SC 4
ISO 15926-2:2003
Industrial automation systems and integration -- Integration of life-cycle data for process


plants including oil and gas production facilities -- Part 2: Data model 90.60 TC 184/SC 4
ISO/TS 15926-3:2009
Industrial automation systems and integration -- Integration of life-cycle data for process


plants including oil and gas production facilities -- Part 3: Reference data for geometry and


topology 60.60 TC 184/SC 4
ISO/TS 15926-4:2007
Industrial automation systems and integration -- Integration of life-cycle data for process


plants including oil and gas production facilities -- Part 4: Initial reference data 60.60 TC


184/SC 4
ISO/CD TS 15926-7
Industrial automation systems and integration -- Integration of life-cycle data for process


plants including oil and gas production facilities -- Part 7: Implementation methods for the


integration of distributed system -- Template methodology 30.99 TC 184/SC 4
ISO/CD TS 15926-8
Industrial automation systems and integration -- Integration of life-cycle data for process


plants including oil and gas production facilities -- Part 8: Implementation methods for the


integration of distributed systems -- OWL representation 30.99 TC 184/SC 4
ISO/CD TS 15926-9
Industrial automation systems and integration -- Integration of life-cycle data for process


plants including oil and gas production facilities -- Part 9: Implementation methods for the


integration of distributed systems -- Facade implementation 30.99 TC 184/SC 4
ISO/CD TS 15926-10
Industrial automation systems and integration -- Integration of life-cycle data for process


plants including oil and gas production facilities -- Part 10: Implementation methods for the


integration of distributed systems -- Abstract test methods 30.99 TC 184/SC 4
ISO/PAS 16739:2005
Industry Foundation Classes, Release 2x, Platform Specification (IFC2x Platform) 90.92 TC


184/SC 4
ISO/PRF 18435-1
Industrial automation systems and integration -- Diagnostics, capability assessment and


maintenance applications integration -- Part 1: Overview and general requirements 50.00 TC


184/SC 5
ISO 18629-1:2004
Industrial automation systems and integration -- Process specification language -- Part 1:


Overview and basic principles 90.93 TC 184/SC 4
ISO 18629-11:2005
Industrial automation systems and integration -- Process specification language -- Part 11: PSL


core 90.93 TC 184/SC 4
ISO 18629-12:2005
Industrial automation systems and integration -- Process specification language -- Part 12:


Outer core 90.93 TC 184/SC 4
ISO 18629-13:2006
Industrial automation systems and integration -- Process specification language -- Part 13:


Duration and ordering theories 60.60 TC 184/SC 4
ISO 18629-14:2006
Industrial automation systems and integration -- Process specification language -- Part 14:


Resource theories 60.60 TC 184/SC 4
ISO 18629-41:2006
Industrial automation systems and integration -- Process specification language -- Part 41:


Definitional extension: Activity extensions 60.60 TC 184/SC 4
ISO 18629-42:2006
Industrial automation systems and integration -- Process specification language -- Part 42:


Definitional extension: Temporal and state extensions 60.60 TC 184/SC 4
ISO 18629-43:2006
Industrial automation systems and integration -- Process specification language -- Part 43:


Definitional extension: Activity ordering and duration extensions 60.60 TC 184/SC 4
ISO 18629-44:2006
Industrial automation systems and integration -- Process specification language -- Part 44:


Definitional extension: Resource extensions 60.60 TC 184/SC 4
ISO/TS 18876-1:2003
Industrial automation systems and integration -- Integration of industrial data for exchange,


access and sharing -- Part 1: Architecture overview and description 60.60 TC 184/SC 4
ISO/TS 18876-2:2003
Industrial automation systems and integration -- Integration of industrial data for exchange,


access and sharing -- Part 2: Integration and mapping methodology 60.60 TC 184/SC 4
ISO 19439:2006
Enterprise integration -- Framework for enterprise modelling 90.20 TC 184/SC 5
ISO 19439:2006/Cor 1:2006
60.60 TC 184/SC 5
ISO 19440:2007
Enterprise integration -- Constructs for enterprise modelling 60.60 TC 184/SC 5
ISO 20242-1:2005
Industrial automation systems and integration -- Service interface for testing applications --


Part 1: Overview 90.60 TC 184/SC 5
ISO/DIS 20242-2
Industrial automation systems and integration -- Service interface for testing applications --


Part 2: Resource management service interface 40.60 TC 184/SC 5
ISO/CD 20242-3
Industrial automation systems and integration -- Service interface for testing applications --


Part 3: Virtual device service interface 30.99 TC 184/SC 5
ISO/CD 20242-4
Industrial automation systems and integration -- Service interface for testing applications --


Part 4: Device capability profile template 30.99 TC 184/SC 5
ISO/PAS 20542:2006
Industrial automation systems and integration -- Product data representation and exchange --


Reference model for systems engineering 60.60 TC 184/SC 4
ISO 22093:2003
Industrial automation systems and integration -- Physical device control -- Dimensional


Measuring Interface Standard (DMIS) 90.60 TC 184/SC 1
ISO/PAS 26183:2006
SASIG Product data quality guidelines for the global automotive industry 60.60 TC 184/SC 4
ISO/CD TS 29002-4
Industrial automation systems and integration -- Exchange of characteristic data -- Part 4:


Basic data 30.60 TC 184/SC 4
ISO/TS 29002-5:2009
Industrial automation systems and integration -- Exchange of characteristic data -- Part 5:


Identification scheme 60.60 TC 184/SC 4
ISO/CD TS 29002-6
Industrial automation systems and integration -- Exchange of characteristic data -- Part 6:


Concept dictionary terminology reference model 30.60 TC 184/SC 4
ISO/NP 29002-10
Industrial automation systems and integration -- Exchange of characteristic data -- Part 10:


Characteristic data exchange format 10.99 TC 184/SC 4
ISO/CD TS 29002-20
Industrial automation systems and integration -- Exchange of characteristic data -- Part 20:


Concept dictionary resolution services 30.60 TC 184/SC 4
ISO/CD TS 29002-31
Industrial automation systems and integration -- Exchange of characteristic data -- Part 31:


Query for characteristic data 30.60 TC 184/SC 4
848IEC 62264-1:2003
Enterprise-control system integration -- Part 1: Models and terminology 60.60 TC 184/SC 5
849IEC 62264-2:2004
Enterprise-control system integration -- Part 2: Model object attributes 60.60 TC 184/SC 5
850IEC 62264-3:2007
Enterprise-control system integration -- Part 3: Activity models of manufacturing operations


management 60.60 TC 184/SC 5
851IEC/DIS 62264-5
Enterprise-control system integration -- Part 5: Business to manufacturing transactions 40.20


TC 184/SC 5

25.040.99 Other industrial automation systems

25.060 Machine tool systems
ICS Field
25.060.01 Machine tool systems in general
25.060.10 Modular units and other devices
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 2562:1973
Modular units for machine tool construction -- Slide units 90.93 TC 39
ISO 2562:1973/Amd 1:1982
60.60 TC 39
ISO 2727:1973
Modular units for machine tool construction -- Headstocks 90.93 TC 39
ISO 2769:1973
Modular units for machine tool construction -- Wing bases for slide units 90.60 TC 39
ISO 2891:1977
Modular units for machine tool construction -- Centre bases and columns 90.60 TC 39
ISO 2905:1985
Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi


-spindle heads 90.60 TC 39
ISO 2912:1973
Modular units for machine tool construction -- Multi-spindle heads -- Casing and input drive


shaft dimensions 90.93 TC 39
ISO 2912:1973/Amd 1:1982
60.60 TC 39
ISO 2934:1973
Modular units for machine tool construction -- Wing base for columns 90.60 TC 39
ISO 3371:1975
Modular units for machine tool construction -- Rotary tables and multi-sided centre bases for


rotary tables 90.93 TC 39
ISO 3476:1975
Modular units for machine tool construction -- Tenon drive and flanges for mounting multi-


spindle heads 90.60 TC 39
ISO 3589:1975
Modular units for machine tool construction -- Integral way columns 90.60 TC 39
ISO 3589:1975/Amd 1:1982
60.60 TC 39
ISO 3590:1976
Modular units for machine tool construction -- Spindle units 90.93 TC 39
ISO 3610:1976
Modular units for machine tool construction -- Support brackets 90.93 TC 39
ISO 3970:1977
Modular units for machine tool construction -- Integral way columns -- Floor-mounted type 90.60


TC 39
ISO 3970:1977/Amd 1:1982
60.60 TC 39
ISO 8526-1:1990
Modular units for machine tools -- Workholding pallets -- Part 1: Workholding pallets up to 800


mm nominal size 90.93 TC 39
ISO 8526-2:1990
Modular units for machine tools -- Workholding pallets -- Part 2: Workholding pallets of


nominal size greater than 800 mm 90.93 TC 39
ISO 8526-2:1990/Cor 1:1992
60.60 TC 39

25.060.20 Dividing and tool-workpiece holding devices
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 238:1974
Reduction sleeves and extension sockets for tools with Morse taper shanks 90.93 TC 29/SC 2
ISO 296:1991
Machine tools -- Self-holding tapers for tool shanks 90.93 TC 29
ISO 297:1988
7/24 tapers for tool shanks for manual changing 90.93 TC 29
ISO 299:1987
Machine tool tables -- T-slots and corresponding bolts 90.60 TC 39
ISO/PRF 702-1
Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 1:


Conical connection 50.00 TC 39/SC 8
ISO 702-1:2001
Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 1:


Conical connection 90.92 TC 39/SC 8
ISO 702-2:2007
Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 2:


Camlock type 60.60 TC 39/SC 8
ISO 702-3:2007
Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 3:


Bayonet type 60.60 TC 39/SC 8
ISO 702-4:2004
Machine tools -- Connecting dimensions of spindle noses and work holding chucks -- Part 4:


Cylindrical connection 90.60 TC 39/SC 8
ISO 839-1:2006
Milling machine arbors with 7/24 tapers -- Part 1: Dimensions and designation 60.60 TC 29/SC 2
ISO 839-2:1977
Milling machine arbors with 7/24 tapers -- Part 2: Accessories 90.93 TC 29/SC 2
ISO 1080:1975
Machine tools -- Morse taper shanks -- Cotter slots with taper keys 90.93 TC 29
ISO 3089:2005
Machine tools -- Test conditions for self-centring, manually operated chucks with one-piece


jaws 90.93 TC 39/SC 8
ISO 3442-1:2005
Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws --


Part 1: Manually operated chucks with tongue and groove type jaws 90.93 TC 39/SC 8
ISO 3442-2:2005
Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws --


Part 2: Power-operated chucks with tongue and groove type jaws 90.93 TC 39/SC 8
ISO 3442-3:2007
Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws --


Part 3: Power-operated chucks with serrated jaws 60.60 TC 39/SC 8
ISO 3936:1993
Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions 90.20 TC


29/SC 2
ISO 3937-1:2008
Cutter arbors with tenon drive -- Part 1: Dimensions of Morse taper 60.60 TC 29/SC 2
ISO 3937-2:2008
Cutter arbors with tenon drive -- Part 2: Dimensions of 7/24 taper 60.60 TC 29/SC 2
ISO 3937-3:2008
Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange


contact surface 60.60 TC 29/SC 2
ISO 4202:1978
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks 90.93 TC 29/SC 2
ISO 4207:1977
Counterbores with Morse taper shanks and detachable pilots 90.93 TC 29/SC 2
ISO 4247:1977
Jig bushes and accessories for drilling purposes -- Dimensions 90.99 TC 29/SC 2
ISO 4248:1978
Jig bushes -- Definitions and nomenclature 90.93 TC 29/SC 2


http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.

No comments:

Post a Comment