Lastest & Cheapest ISO Standards In PDF (34)

http://www.int-bizdirectory.com/standards.htm

83.020 Manufacturing processes in the rubber and plastics industries

83.040 Raw materials for rubber and plastics
83.040.01 Raw materials for rubber and plastics in general
Standard and/or project TC
ISO 20299-1:2006
Film for wrapping rubber bales -- Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) 90.60 TC 45/SC 3
ISO 20299-1:2006/Cor 1:2008
60.60 TC 45/SC 3
ISO 20299-2:2006
Film for wrapping rubber bales -- Part 2: Natural rubber 90.60 TC 45/SC 3
ISO 20299-3:2008
Film for wrapping rubber bales -- Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM) 60.60 TC 45/SC 3

83.040.10 Latex and raw rubber
Standard and/or project TC
ISO 35:2004
Natural rubber latex concentrate -- Determination of mechanical stability 90.93 TC 45/SC 3
ISO 35:2004/Amd 1:2006
Precision data 60.60 TC 45/SC 3
ISO 123:2001
Rubber latex -- Sampling 90.93 TC 45/SC 3
ISO 124:2008
Latex, rubber -- Determination of total solids content 60.60 TC 45/SC 3
ISO 124:2008/WD Amd 1
20.99 TC 45/SC 3
ISO 125:2003
Natural rubber latex concentrate -- Determination of alkalinity 90.93 TC 45/SC 3
ISO 125:2003/WD Amd 1
20.99 TC 45/SC 3
ISO 126:2005
Natural rubber latex concentrate -- Determination of dry rubber content 90.93 TC 45/SC 3
ISO 127:1995
Rubber, natural latex concentrate -- Determination of KOH number 90.93 TC 45/SC 3
ISO 127:1995/Amd 1:2006
Precision data 60.60 TC 45/SC 3
ISO 248:2005
Rubber, raw -- Determination of volatile-matter content 90.92 TC 45/SC 2
ISO/CD 248-1
Rubber, raw -- Determination of volatile-matter content -- Part 1: Hot-mill method and oven method 30.60 TC 45/SC 2
ISO/CD 248-2
Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit 30.60 TC 45/SC 2
ISO 249:1995
Rubber, raw natural -- Determination of dirt content 90.93 TC 45/SC 2
ISO 498:1992
Natural rubber latex concentrate -- Preparation of dry films 90.93 TC 45/SC 3
ISO 506:1992
Rubber latex, natural, concentrate -- Determination of volatile fatty acid number 90.93 TC 45/SC 3
ISO 705:1994
Rubber latex -- Determination of density between 5 degrees C and 40 degrees C 90.60 TC 45/SC 3
ISO 706:2004
Rubber latex -- Determination of coagulum content (sieve residue) 90.93 TC 45/SC 3
ISO 976:1996
Rubber and plastics -- Polymer dispersions and rubber latices -- Determination of pH 90.93 TC 45/SC 3
ISO 976:1996/Amd 1:2006
Precision data 60.60 TC 45/SC 3
ISO 1147:1995
Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test 90.93 TC 61/SC 9
ISO 1409:2006
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of surface tension by the ring method 90.60 TC 45/SC 2
ISO 1629:1995
Rubber and latices -- Nomenclature 90.93 TC 45
ISO 1629:1995/Amd 1:2007
60.60 TC 45
ISO 1629:1995/Amd 1:2007/Cor 1:2009
60.60 TC 45
ISO 1652:2004
Rubber latex -- Determination of apparent viscosity by the Brookfield test method 90.93 TC 45/SC 3
ISO 1656:1996
Rubber, raw natural, and rubber latex, natural -- Determination of nitrogen content 90.93 TC 45/SC 2
ISO 1657:1986
Rubber, raw and rubber latex -- Determination of iron content -- 1,10-Phenanthroline photometric method 90.93 TC 45/SC 2
ISO 1795:2007
Rubber, raw natural and raw synthetic -- Sampling and further preparative procedures 60.60 TC 45/SC 3
ISO 1802:1992
Natural rubber latex concentrate -- Determination of boric acid content 90.93 TC 45/SC 3
ISO/WD 2000
Rubber, raw natural -- Guidelines for the specification of technically specified rubber (TSR) 20.99 TC 45/SC 3
ISO 2000:2003
Rubber, raw natural -- Guidelines for the specification of technically specified rubber (TSR) 90.92 TC 45/SC 3
ISO/DIS 2004
Natural rubber latex concentrate -- Centrifuged or creamed, ammonia-preserved types -- Specifications 40.20 TC 45/SC 3
ISO 2004:1997
Natural rubber latex concentrate -- Centrifuged or creamed, ammonia-preserved types -- Specification 90.92 TC 45/SC 3
ISO 2005:1992
Rubber latex, natural, concentrate -- Determination of sludge content 90.93 TC 45/SC 3
ISO 2005:1992/Amd 1:2006
Precision data 60.60 TC 45/SC 3
ISO 2006:1985
Rubber latex, synthetic -- Determination of high-speed mechanical stability 90.92 TC 45/SC 3
ISO/FDIS 2006-1
Rubber latex, synthetic -- Determination of mechanical stability -- Part 1: High-speed method 50.20 TC 45/SC 3
ISO/FDIS 2006-2
Rubber latex, synthetic -- Determination of mechanical stability -- Part 2: Moderate-speed method under load 50.20 TC 45/SC 3
ISO 2027:1990
Natural rubber latex concentrate, evaporated, preserved -- Specification 90.93 TC 45/SC 3
ISO 2028:1999
Synthetic rubber latex -- Preparation of dry polymer 90.60 TC 45/SC 3
ISO 2115:1996
Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature 90.93 TC 61/SC 9
ISO 2453:1991
Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method 90.93 TC 45/SC 2
ISO 2453:1991/Cor 1:2003
60.60 TC 45/SC 2
ISO 2930:1995
Rubber, raw natural -- Determination of plasticity retention index (PRI) 90.92 TC 45/SC 3
ISO/FDIS 2930
Rubber, raw natural -- Determination of plasticity retention index (PRI) 50.00 TC 45/SC 3
ISO 2930:1995/Amd 1:2008
60.60 TC 45/SC 3
ISO 3136:1983
Rubber latex -- Styrene-butadiene -- Determination of bound styrene content 90.93 TC 45/SC 2
ISO 3899:2005
Rubber -- Nitrile latex -- Determination of residual acrylonitrile content 90.93 TC 45/SC 2
ISO 3900:1995
Rubber -- Nitrile latex -- Determination of bound acrylonitrile content 90.93 TC 45/SC 2
ISO 4655:1985
Rubber -- Reinforced styrene-butadiene latex -- Determination of total bound styrene content 90.60 TC 45/SC 2
ISO 4660:1999
Rubber, raw natural -- Colour index test 90.60 TC 45/SC 3
ISO 6225-1:2006
Rubber, raw, natural -- Determination of castor oil content -- Part 1: Determination of castor oil glyceride content by thin-layer chromatography 90.60 TC 45/SC 2
ISO 6225-2:1990
Rubber, raw, natural -- Determination of castor oil content -- Part 2: Determination of total ricinoleic acid content by gas chromatography 90.93 TC 45/SC 2
ISO 6235:1995
Rubber, raw -- Determination of block polystyrene content -- Ozonolysis method 90.93 TC 45/SC 2
ISO 7323:2006
Rubber, raw and unvulcanized compounded -- Determination of plasticity number and recovery number -- Parallel-plate method 90.60 TC 45/SC 2
ISO 7664:2000
Rubber, raw natural and raw synthetic -- General guidance on storage 90.93 TC 45/SC 3
ISO 7780:1998
Rubbers and rubber latices -- Determination of manganese content -- Sodium periodate photometric methods 90.93 TC 45/SC 2
ISO 7781:2008
Styrene-butadiene rubber, raw -- Determination of soap and organic-acid content 60.60 TC 45/SC 2
ISO 8053:1995
Rubber and latex -- Determination of copper content -- Photometric method 90.93 TC 45/SC 2
ISO 9026:2007
Raw rubber or unvulcanized compounds -- Determination of green strength 60.60 TC 45/SC 2
ISO 9252:1989
Synthetic rubber latex -- Microbiological examination 90.60 TC 45/SC 3
ISO/DIS 10638
Raw rubber, latex, rubber compounds and rubber products -- Identification of antidegradants by gas chromatography/mass spectrometry 40.60 TC 45/SC 2
ISO 11089:1997
Rubber, raw synthetic -- Determination of anti-degradants by high-performance liquid chromatography 90.92 TC 45/SC 2
ISO/DIS 11089
Rubber, raw synthetic -- Determination of anti-degradants by high-performance liquid chromatography 40.60 TC 45/SC 2
ISO 11344:2004
Rubber, raw synthetic -- Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography 90.93 TC 45/SC 2
ISO 11344:2004/Cor 1:2008
60.60 TC 45/SC 2
ISO/DIS 11852
Rubber -- Determination of magnesium content of field and concentrated natural rubber latex by titration 40.20 TC 45/SC 3
ISO/CD 11853
Rubber -- Determination of magnesium content of raw natural rubber and rubber products by atomic absorption spectrometry 30.99 TC 45/SC 2
ISO 12000:2000
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods 90.93 TC 61/SC 9
ISO 12243:2003
Medical gloves made from natural rubber latex -- Determination of water-extractable protein using the modified Lowry method 90.93 TC 45/SC 3
ISO 13741-1:1998
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 1: Direct liquid injection method 90.93 TC 61/SC 9
ISO 13741-2:1998
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 2: Headspace method 90.93 TC 61/SC 9
ISO 13773:1997
Rubber -- Polychloroprene latex -- Determination of alkalinity 90.93 TC 45/SC 3
ISO 16564:2004
Rubber, raw natural -- Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) 90.93 TC 45/SC 2
ISO 16564:2004/Amd 1:2006
60.60 TC 45/SC 2
ISO 17052:2007
Rubber, raw -- Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography -- Thermal desorption (dynamic headspace) method 60.60 TC 45/SC 2
ISO 21461:2009
Rubber -- Determination of the aromaticity of oil in vulcanized rubber compounds 60.60 TC 45/SC 3
ISO 22768:2006
Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC) 90.60 TC 45/SC 2
ISO 24698-1:2008
Rubber, raw -- Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -- Part 1: Combustion (Dumas) method 60.60 TC 45/SC 2
ISO 24698-2:2008
Rubber, raw -- Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -- Part 2: Kjeldahl method 60.60 TC 45/SC 2

83.040.20 Rubber compounding ingredients
Including carbon black, kaolin clay, etc.
Standard and/or project TC
ISO 1124:1988
Rubber compounding ingredients -- Carbon black shipment sampling procedures 90.93 TC 45/SC 3
ISO 1125:1999
Rubber compounding ingredients -- Carbon black -- Determination of ash 90.60 TC 45/SC 3
ISO 1126:2006
Rubber compounding ingredients -- Carbon black -- Determination of loss on heating 90.60 TC 45/SC 3
ISO 1138:2007
Rubber compounding ingredients -- Carbon black -- Determination of sulfur content 60.60 TC 45/SC 3
ISO 1304:2006
Rubber compounding ingredients -- Carbon black -- Determination of iodine adsorption number 90.60 TC 45/SC 3
ISO 1306:1995
Rubber compounding ingredients -- Carbon black (pelletized) -- Determination of pour density 90.93 TC 45/SC 3
ISO 1435:1996
Rubber compounding ingredients -- Carbon black (pelletized) -- Determination of fines content 90.93 TC 45/SC 3
ISO 1437:2007
Rubber compounding ingredients -- Carbon black -- Determination of sieve residue 60.60 TC 45/SC 3
ISO 3257:1992
Rubber compounding ingredients -- Carbon black -- Method of evaluation in styrene-butadiene rubbers 90.93 TC 45/SC 3
ISO 3858:2008
Rubber compounding ingredients -- Carbon black -- Determination of light transmittance of toluene extract 60.60 TC 45/SC 3
ISO 4652-1:1994
Rubber compounding ingredients -- Carbon black -- Determination of specific surface area by nitrogen adsorption methods -- Part 1: Single-point procedures 90.60 TC 45/SC 3
ISO 4656:2007
Rubber compounding ingredients -- Carbon black -- Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) 60.60 TC 45/SC 3
ISO 5435:2008
Rubber compounding ingredients -- Carbon black -- Determination of tinting strength 60.60 TC 45/SC 3
ISO 5794-1:2005
Rubber compounding ingredients -- Silica, precipitated, hydrated -- Part 1: Non-rubber tests 90.93 TC 45/SC 3
ISO 5794-1:2005/DAmd 1
40.20 TC 45/SC 3
ISO 5794-1:2005/Cor 1:2006
60.60 TC 45/SC 3
ISO 5794-1:2005/Cor 2:2007
60.60 TC 45/SC 3
ISO 5794-2:1998
Rubber compounding ingredients -- Silica, precipitated, hydrated -- Part 2: Evaluation procedures in styrene-butadiene rubber 90.93 TC 45/SC 3
ISO/WD 5794-3
Rubber compounding ingredients -- Silica, precipitated, hydrated -- Part 3: Evaluation procedures in a mixed solution of styrene-butadiene rubber and butadiene rubber 20.99 TC 45/SC 3
ISO 5796:2000
Rubber compounding ingredients -- Natural calcium carbonate -- Test methods 90.93 TC 45/SC 3
ISO 6209:2009
Rubber compounding ingredients -- Carbon black -- Determination of solvent-extractable material 60.60 TC 45/SC 3
ISO/DIS 6472.2
Rubber compounding ingredients -- Symbols and abbreviated terms 40.60 TC 45
ISO 6472:2004
Rubber compounding ingredients -- Abbreviations 90.92 TC 45
ISO 8312:1999
Rubber compounding ingredients -- Stearic acid -- Definition and test methods 90.60 TC 45/SC 3
ISO 8332:2006
Rubber compounding ingredients -- Sulfur -- Methods of test 90.60 TC 45/SC 3
ISO 8511:1995
Rubber compounding ingredients -- Carbon black -- Determination of pellet size distribution 90.93 TC 45/SC 3
ISO/DIS 8942.2
Rubber compounding ingredients -- Carbon black -- Determination of individual pellet crushing strength 40.20 TC 45/SC 3
ISO/TR 8942:1988
Rubber compounding ingredients -- Carbon black -- Determination of individual pellet crushing strength 90.92 TC 45/SC 3
ISO 9298:1995
Rubber compounding ingredients -- Zinc oxide -- Test methods 90.93 TC 45/SC 3
ISO/DIS 10638
Raw rubber, latex, rubber compounds and rubber products -- Identification of antidegradants by gas chromatography/mass spectrometry 40.60 TC 45/SC 2
ISO 11234:1995
Rubber compounding ingredients -- Carbon black (pelletized) -- Determination of dust content 90.93 TC 45/SC 3
ISO 11235:1999
Rubber compounding ingredients -- Sulfenamide accelerators -- Test methods 90.60 TC 45/SC 3
ISO 11236:2000
Rubber compounding ingredients -- p-Phenylenediamine (PPD) antidegradants -- Test methods 90.93 TC 45/SC 3
ISO 11236:2000/Cor 1:2006
60.60 TC 45/SC 3
ISO/WD 15825
Rubber compounding ingredients -- Carbon black -- Determination of aggregate size distribution by disc centrifuge photosedimentometry 20.99 TC 45/SC 3
ISO 15825:2004
Rubber compounding ingredients -- Carbon black -- Determination of aggregate size distribution by disc centrifuge photosedimentometry 90.92 TC 45/SC 3
ISO 15825:2004/Cor 1:2006
60.60 TC 45/SC 3
ISO 18852:2005
Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) 90.93 TC 45/SC 3
ISO 21869:2006
Rubber compounding ingredients -- Magnesium oxide -- Methods of test 90.60 TC 45/SC 3
ISO 21870:2005
Rubber compounding ingredients -- Carbon black -- Determination of high-temperature loss on heating by thermogravimetry 90.93 TC 45/SC 3
ISO/NP 25821
Rubber compounding ingredients -- Organic vulcanizing agents -- Determination of organic peroxide content 10.99 TC 45/SC 3
ISO/DIS 28343
Rubber compounding ingredients -- Process oils -- Determination of glass transition temperature by DSC 40.20 TC 45/SC 3
ISO/FDIS 28641
Rubber compounding ingredients -- Organic chemicals -- General test methods 50.00 TC 45/SC 3

83.040.30 Auxiliary materials and additives for plastics
Including fillers, extenders, hardeners, pigments, plasticizers, etc.
Standard and/or project TC
ISO/DIS 1043-2
Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials 40.60 TC 61/SC 1
ISO 1043-2:2000
Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials 90.92 TC 61/SC 1
ISO 1043-3:1996
Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers 90.93 TC 61/SC 1
ISO 1043-4:1998
Plastics -- Symbols and abbreviated terms -- Part 4: Flame retardants 90.93 TC 61/SC 1
ISO 15038:1999
Plastics -- Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials -- Determination of active-oxygen content 90.93 TC 61/SC 12

83.060 Rubber
Raw rubber, see 83.040.10
Standard and/or project TC
ISO 34-1:2004
Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces 90.92 TC 45/SC 2
ISO/DIS 34-1
Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces 40.20 TC 45/SC 2
ISO 34-2:2007
Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces 60.60 TC 45/SC 2
ISO/CD 36
Rubber, vulcanized or thermoplastic -- Determination of adhesion to textile fabrics 30.60 TC 45/SC 2
ISO 36:2005
Rubber, vulcanized or thermoplastic -- Determination of adhesion to textile fabrics 90.92 TC 45/SC 2
ISO/CD 37
Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties 30.60 TC 45/SC 2
ISO 37:2005
Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties 90.92 TC 45/SC 2
ISO 37:2005/Cor 1:2008
60.60 TC 45/SC 2
ISO 48:2007
Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD) 90.92 TC 45/SC 2
ISO 48:2007/Cor 1:2009
60.60 TC 45/SC 2
ISO 132:2005
Rubber, vulcanized or thermoplastic -- Determination of flex cracking and crack growth (De Mattia) 90.92 TC 45/SC 2
ISO/CD 132
Rubber, vulcanized or thermoplastic -- Determination of flex cracking and crack growth (De Mattia) 30.60 TC 45/SC 2
ISO 188:2007
Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests 60.60 TC 45/SC 2
ISO 247:2006
Rubber -- Determination of ash 90.60 TC 45/SC 2
ISO 289-1:2005
Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity 90.93 TC 45/SC 2
ISO 289-1:2005/CD Amd 1
30.99 TC 45/SC 2
ISO 289-1:2005/Cor 1:2009
60.60 TC 45/SC 2
ISO 289-2:1994
Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 2: Determination of pre-vulcanization characteristics 90.60 TC 45/SC 2
ISO 289-3:1999
Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR 90.60 TC 45/SC 2
ISO 289-4:2003
Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 4: Determination of the Mooney stress-relaxation rate 90.93 TC 45/SC 2
ISO 812:2006
Rubber, vulcanized or thermoplastic -- Determination of low-temperature brittleness 90.60 TC 45/SC 2
ISO/DIS 813
Rubber, vulcanized or thermoplastic -- Determination of adhesion to a rigid substrate -- 90 degree peel method 40.60 TC 45/SC 2
ISO 813:1997
Rubber, vulcanized or thermoplastic -- Determination of adhesion to a rigid substrate -- 90 degree peel method 90.92 TC 45/SC 2
ISO 814:2007
Rubber, vulcanized or thermoplastic -- Determination of adhesion to metal -- Two-plate method 60.60 TC 45/SC 2
ISO 815-1:2008
Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures 60.60 TC 45/SC 2
ISO 815-2:2008
Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures 60.60 TC 45/SC 2
ISO 1382:2008
Rubber -- Vocabulary 60.60 TC 45
ISO/WD 1407
Rubber -- Determination of solvent extract 20.99 TC 45/SC 2
ISO 1407:2009
Rubber -- Determination of solvent extract 60.60 TC 45/SC 2
ISO 1408:1995
Rubber -- Determination of carbon black content -- Pyrolytic and chemical degradation methods 90.93 TC 45/SC 2
ISO 1431-1:2004
Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing 90.60 TC 45/SC 2
ISO 1431-1:2004/Amd 1:2009
60.60 TC 45/SC 2
ISO 1431-3:2000
Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers 90.93 TC 45/SC 2
ISO 1432:1988
Rubber, vulcanized or thermoplastic -- Determination of low temperature stiffening (Gehman test) 90.60 TC 45/SC 2
ISO 1432:1988/Cor 1:2003
60.60 TC 45/SC 2
ISO 1434:1995
Natural rubber in bales -- Amount of bale coating -- Determination 90.60 TC 45/SC 3
ISO 1629:1995
Rubber and latices -- Nomenclature 90.93 TC 45
ISO 1629:1995/Amd 1:2007
60.60 TC 45
ISO 1629:1995/Amd 1:2007/Cor 1:2009
60.60 TC 45
ISO/FDIS 1658
Natural rubber (NR) -- Evaluation procedure 50.20 TC 45/SC 3
ISO 1658:1994
Natural rubber (NR) -- Evaluation procedure 90.92 TC 45/SC 3
ISO 1817:2005
Rubber, vulcanized -- Determination of the effect of liquids 90.92 TC 45/SC 2
ISO/CD 1817
Rubber, vulcanized -- Determination of the effect of liquids 30.60 TC 45/SC 2
ISO 1827:2007
Rubber, vulcanized or thermoplastic -- Determination of shear modulus and adhesion to rigid plates -- Quadruple-shear methods 60.60 TC 45/SC 2
ISO 1853:1998
Conducting and dissipative rubbers, vulcanized or thermoplastic -- Measurement of resistivity 90.92 TC 45/SC 2
ISO/CD 1853
Conducting and dissipative rubbers, vulcanized or thermoplastic -- Measurement of resistivity 30.60 TC 45/SC 2
ISO 2007:2007
Rubber, unvulcanized -- Determination of plasticity -- Rapid-plastimeter method 60.60 TC 45/SC 2
ISO 2230:2002
Rubber products -- Guidelines for storage 90.93 TC 45/SC 4
ISO 2285:2007
Rubber, vulcanized or thermoplastic -- Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load 60.60 TC 45/SC 2
ISO 2302:2005
Isobutene-isoprene rubber (IIR) -- Evaluation procedures 90.93 TC 45/SC 3
ISO 2303:2003
Isoprene rubber (IR) -- Non-oil-extended, solution-polymerized types -- Evaluation procedure 90.92 TC 45/SC 3
ISO/CD 2303
Isoprene rubber (IR) -- Non-oil-extended, solution-polymerized types -- Evaluation procedure 30.60 TC 45/SC 3
ISO/FDIS 2322
Styrene-butadiene rubber (SBR) -- Emulsion- and solution-polymerized types -- Evaluation procedures 50.20 TC 45/SC 3
ISO 2322:1996
Styrene-butadiene rubber (SBR) -- Emulsion- and solution-polymerized types -- Evaluation procedures 90.92 TC 45/SC 3
ISO 2393:2008
Rubber test mixes -- Preparation, mixing and vulcanization -- Equipment and procedures 60.60 TC 45/SC 3
ISO 2454:1995
Rubber products -- Determination of zinc content -- EDTA titrimetric method 90.93 TC 45/SC 2
ISO 2475:1999
Chloroprene rubber (CR) -- General-purpose types -- Evaluation procedure 90.60 TC 45/SC 3
ISO 2475:1999/Cor 1:2001
60.60 TC 45/SC 3
ISO 2475:1999/Amd 1:2005
60.60 TC 45/SC 3
ISO 2476:1996
Rubber, butadiene (BR) -- Solution-polymerized types -- Evaluation procedures 90.92 TC 45/SC 3
ISO/FDIS 2476
Butadiene rubber (BR) -- Solution-polymerized types -- Evaluation procedures 50.20 TC 45/SC 3
ISO 2781:2008
Rubber, vulcanized or thermoplastic -- Determination of density 60.60 TC 45/SC 2
ISO 2781:2008/DAmd 1
40.99 TC 45/SC 2
ISO 2782:2006
Rubber, vulcanized or thermoplastic -- Determination of permeability to gases 90.60 TC 45/SC 2
ISO/CD 2878
Rubber -- Antistatic and conductive products -- Determination of electrical resistance 30.60 TC 45/SC 2
ISO 2878:2005
Rubber -- Antistatic and conductive products -- Determination of electrical resistance 90.92 TC 45/SC 2
ISO 2921:2005
Rubber, vulcanized -- Determination of low-temperature characteristics -- Temperature-retraction procedure (TR test) 90.92 TC 45/SC 2
ISO/CD 2921
Rubber, vulcanized -- Determination of low-temperature characteristics -- Temperature-retraction procedure (TR test) 30.60 TC 45/SC 2
ISO 2951:1974
Vulcanized rubber -- Determination of insulation resistance 90.60 TC 45/SC 2
ISO/WD 3384
Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression at ambient and at elevated temperatures 20.99 TC 45/SC 2
ISO 3384:2005
Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression at ambient and at elevated temperatures 90.92 TC 45/SC 2
ISO 3387:1994
Rubber -- Determination of crystallization effects by hardness measurements 90.60 TC 45/SC 2
ISO 3387:1994/Cor 1:2000
60.60 TC 45/SC 2
ISO 3417:2008
Rubber -- Measurement of vulcanization characteristics with the oscillating disc curemeter 60.60 TC 45/SC 2
ISO 3865:2005
Rubber, vulcanized or thermoplastic -- Methods of test for staining in contact with organic material 90.93 TC 45/SC 2
ISO 4097:2007
Rubber, ethylene-propylene-diene (EPDM) -- Evaluation procedure 60.60 TC 45/SC 3
ISO 4645:1984
Rubber and rubber products -- Guide to the identification of antidegradants -- Thin layer chromatographic methods 90.93 TC 45/SC 2
ISO 4645:1984/Cor 1:1991
60.60 TC 45/SC 2
ISO 4647:1982
Rubber, vulcanized -- Determination of static adhesion to textile cord -- H-pull test 90.92 TC 45/SC 2
ISO/DIS 4647
Rubber, vulcanized -- Determination of static adhesion to textile cord -- H-pull test 40.20 TC 45/SC 2
ISO/DIS 4649
Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using a rotating cylindrical drum device 40.20 TC 45/SC 2
ISO 4649:2002
Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using a rotating cylindrical drum device 90.92 TC 45/SC 2
ISO/CD 4650
Rubber -- Identification -- Infrared spectrometric method 30.60 TC 45/SC 2
ISO 4650:2005
Rubber -- Identification -- Infrared spectrometric method 90.92 TC 45/SC 2
ISO 4658:1999
Acrylonitrile-butadiene rubber (NBR) -- Evaluation procedure 90.60 TC 45/SC 3
ISO 4658:1999/Amd 1:2004
60.60 TC 45/SC 3
ISO 4659:2003
Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) -- Evaluation procedure 90.93 TC 45/SC 3
ISO 4661-2:1987
Rubber, vulcanized -- Preparation of samples and test pieces -- Part 2: Chemical tests 90.93 TC 45/SC 2
ISO 4662:1986
Rubber -- Determination of rebound resilience of vulcanizates 90.92 TC 45/SC 2
ISO/PRF 4662
Rubber, vulcanized or thermoplastic -- Determination of rebound resilience 50.00 TC 45/SC 2
ISO/CD 4664-1
Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- Part 1: General guidance 30.60 TC 45/SC 2
ISO 4664-1:2005
Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- Part 1: General guidance 90.92 TC 45/SC 2
ISO 4664-2:2006
Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- Part 2: Torsion pendulum methods at low frequencies 90.60 TC 45/SC 2
ISO 4665:2006
Rubber, vulcanized or thermoplastic -- Resistance to weathering 90.60 TC 45/SC 2
ISO 4666-1:1982
Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 1: Basic principles 90.92 TC 45/SC 2
ISO/DIS 4666-1
Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 1: Basic principles 40.20 TC 45/SC 2
ISO 4666-2:2008
Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 2: Rotary flexometer 60.60 TC 45/SC 2
ISO/DIS 4666-3
Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 3: Compression flexometer (constant-strain type) 40.20 TC 45/SC 2
ISO 4666-3:1982
Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 3: Compression flexometer 90.92 TC 45/SC 2
ISO 4666-4:2007
Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 4: Constant-stress flexometer 60.60 TC 45/SC 2
ISO 5478:2006
Rubber -- Determination of styrene content -- Nitration method 90.60 TC 45/SC 2
ISO 5600:2007
Rubber -- Determination of adhesion to rigid materials using conical shaped parts 60.60 TC 45/SC 2
ISO 5603:2007
Rubber, vulcanized -- Determination of adhesion to wire cord 60.60 TC 45/SC 2
ISO 5945:1989
Rubber -- Determination of polyisoprene content 90.93 TC 45/SC 2
ISO 6101-1:1991
Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 1: Determination of zinc content 90.93 TC 45/SC 2
ISO 6101-2:1997
Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 2: Determination of lead content 90.93 TC 45/SC 2
ISO 6101-3:1997
Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content 90.93 TC 45/SC 2
ISO 6101-4:1997
Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content 90.93 TC 45/SC 2
ISO 6101-5:2006
Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 5: Determination of iron content 90.60 TC 45/SC 2
ISO 6133:1998
Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength 90.93 TC 45/SC 2
ISO 6502:1999
Rubber -- Guide to the use of curemeters 90.60 TC 45/SC 2
ISO 6505:2005
Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals 90.93 TC 45/SC 2
ISO 6528-1:1992
Rubber -- Determination of total sulfur content -- Part 1: Oxygen combustion flask method 90.93 TC 45/SC 2
ISO 6528-2:1992
Rubber -- Determination of total sulfur content -- Part 2: Sodium peroxide fusion method 90.93 TC 45/SC 2
ISO 6528-3:1988
Rubber -- Determination of total sulfur content -- Part 3: Furnace combustion method 90.93 TC 45/SC 2
ISO 6914:2008
Rubber, vulcanized or thermoplastic -- Determination of ageing characteristics by measurement of stress relaxation in tension 60.60 TC 45/SC 2
ISO 6943:2007
Rubber, vulcanized -- Determination of tension fatigue 60.60 TC 45/SC 2
ISO 7269:1995
Rubber -- Determination of free sulfur 90.93 TC 45/SC 2
ISO 7269:1995/Cor 1:2002
60.60 TC 45/SC 2
ISO 7270-1:2003
Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 1: Identification of polymers (single polymers and polymer blends) 90.93 TC 45/SC 2
ISO 7270-1:2003/CD Amd 1
30.60 TC 45/SC 2
ISO 7270-2:2005
Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2: Determination of styrene/butadiene/isoprene ratio 90.92 TC 45/SC 2
ISO/CD 7270-2
Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2: Determination of styrene/butadiene/isoprene ratio 30.60 TC 45/SC 2
ISO 7323:2006
Rubber, raw and unvulcanized compounded -- Determination of plasticity number and recovery number -- Parallel-plate method 90.60 TC 45/SC 2
ISO/DIS 7619-1
Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness) 40.20 TC 45/SC 2
ISO 7619-1:2004
Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness) 90.92 TC 45/SC 2
ISO 7619-1:2004/Amd 1:2008
Precision data 60.60 TC 45/SC 2
ISO/DIS 7619-2
Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 2: IRHD pocket meter method 40.20 TC 45/SC 2
ISO 7619-2:2004
Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 2: IRHD pocket meter method 90.92 TC 45/SC 2
ISO/TR 7620:2005
Rubber materials -- Chemical resistance 60.60 TC 45/SC 4
ISO 7663:2005
Halogenated isobutene-isoprene rubber (BIIR and CIIR) -- Evaluation procedures 90.93 TC 45/SC 3
ISO 7725:1991
Rubber and rubber products -- Determination of bromine and chlorine content -- Oxygen flask combustion technique 90.93 TC 45/SC 2
ISO/CD 7743
Rubber, vulcanized or thermoplastic -- Determination of compression stress-strain properties 30.60 TC 45/SC 2
ISO 7743:2008
Rubber, vulcanized or thermoplastic -- Determination of compression stress-strain properties 90.92 TC 45/SC 2
ISO 7780:1998
Rubbers and rubber latices -- Determination of manganese content -- Sodium periodate photometric methods 90.93 TC 45/SC 2
ISO 8013:2006
Rubber, vulcanized -- Determination of creep in compression or shear 90.60 TC 45/SC 2
ISO 8053:1995
Rubber and latex -- Determination of copper content -- Photometric method 90.93 TC 45/SC 2
ISO 8054:1996
Rubber, compounded or vulcanized -- Determination of sulfide sulfur content -- Iodometric method 90.93 TC 45/SC 2
ISO 9026:2007
Raw rubber or unvulcanized compounds -- Determination of green strength 60.60 TC 45/SC 2
ISO 9028:2006
Rubber -- Dissolution by acid digestion 90.60 TC 45/SC 2
ISO/TR 9272:2005
Rubber and rubber products -- Determination of precision for test method standards 60.60 TC 45/SC 2
ISO 9924-1:2000
Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers 90.93 TC 45/SC 2
ISO 9924-2:2000
Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 2: Acrylonitrile-butadiene and halobutyl rubbers 90.93 TC 45/SC 2
ISO 9924-3:2009
Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction 60.60 TC 45/SC 2
ISO 10398:1998
Rubber -- Identification of accelerators in cured and uncured compounds 90.93 TC 45/SC 2
ISO 11345:2006
Rubber -- Assessment of carbon black and carbon black/silica dispersion -- Rapid comparative methods 90.60 TC 45/SC 2
ISO 11346:2004
Rubber, vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use 90.93 TC 45/SC 2
ISO/CD TR 12134
Rubber -- Estimation of uncertainty for rubber test methods -- Nonfunctional parameters 30.60 TC 45/SC 2
ISO/CD 12492
Rubber, raw -- Determination of moisture content by the Karl Fischer method 30.60 TC 45/SC 2
ISO/DIS 12493
Rubber, vulcanized -- Determination of stress in tension on heating 40.60 TC 45/SC 2
ISO 12965:2000
Butadiene rubber -- Determination of microstructure by infra-red spectrometry 90.93 TC 45/SC 2
ISO 12965:2000/Cor 1:2006
60.60 TC 45/SC 2
ISO/AWI 13145
Rubber -- Determination of viscosity using a rotorless oscillating-shear rheometer 20.00 TC 45/SC 2
ISO/CD 13226
Rubber -- Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers 30.60 TC 45/SC 2
ISO 13226:2005
Rubber -- Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers 90.92 TC 45/SC 2
ISO 13226:2005/Cor 1:2007
60.60 TC 45/SC 2
ISO/NP 13507
Rubber compounds -- Short names for properties reported in certificates of analysis 10.99 TC 45
ISO 14558:2000
Rubber -- Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy 90.93 TC 45/SC 2
ISO 15113:2005
Rubber -- Determination of frictional properties 90.93 TC 45/SC 2
ISO 15671:2000
Rubber and rubber additives -- Determination of total sulfur content using an automatic analyser 90.93 TC 45/SC 2
ISO 15672:2000
Rubber and rubber additives -- Determination of total nitrogen content using an automatic analyser 90.93 TC 45/SC 2
ISO 16565:2008
Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers 60.60 TC 45/SC 2
ISO 17564:2008
Raw hydrogenated nitrile rubber (HNBR) -- Determination of residual unsaturation by iodine value 60.60 TC 45/SC 2
ISO 18517:2005
Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide 90.93 TC 45/SC 2
ISO 18898:2006
Rubber -- Calibration and verification of hardness testers 90.60 TC 45/SC 2
ISO 18899:2004
Rubber -- Guide to the calibration of test equipment 90.93 TC 45/SC 2
ISO 19003:2006
Rubber and rubber products -- Guidance on the application of statistics to physical testing 90.60 TC 45/SC 2
ISO 19004:2004
Rubber and rubber products -- Determination of the sensitivity of test methods 90.93 TC 45/SC 2
ISO 21561:2005
Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR 90.93 TC 45/SC 2
ISO 21561:2005/CD Amd 1
30.60 TC 45/SC 2
ISO 22768:2006
Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC) 90.60 TC 45/SC 2
ISO 23233:2009
Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion using a driven, vertical abrasive disc 60.60 TC 45/SC 2
ISO 23337:2007
Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using the Improved Lambourn test machine 60.60 TC 45/SC 2
ISO/DIS 23529
Rubber -- General procedures for preparing and conditioning test pieces for physical test methods 40.20 TC 45/SC 2
ISO 23529:2004
Rubber -- General procedures for preparing and conditioning test pieces for physical test methods 90.92 TC 45/SC 2
ISO 23794:2003
Rubber, vulcanized or thermoplastic -- Abrasion testing -- Guidance 90.92 TC 45/SC 2
ISO/DIS 23794
Rubber, vulcanized or thermoplastic -- Abrasion testing -- Guidance 40.99 TC 45/SC 2
ISO 24453:2008
Rubber -- Acquisition and presentation of comparable single-point data 60.60 TC 45/SC 2
ISO 24454:2008
Rubber -- Acquisition and presentation of comparable multi-point data 60.60 TC 45/SC 2
ISO 27588:2008
Rubber, vulcanized or thermoplastic -- Determination of dead-load hardness using the very low rubber hardness (VLRH) scale 60.60 TC 45/SC 2
ISO 27727:2008
Rubber, vulcanized -- Measurement of fatigue crack growth rate 60.60 TC 45/SC 2

83.080 Plastics
83.080.01 Plastics in general
Standard and/or project TC
ISO 62:2008
Plastics -- Determination of water absorption 60.60 TC 61/SC 6
ISO 75-1:2004
Plastics -- Determination of temperature of deflection under load -- Part 1: General test method 90.93 TC 61/SC 2
ISO 171:1980
Plastics -- Determination of bulk factor of moulding materials 90.93 TC 61/SC 5
ISO 175:1999
Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals 90.60 TC 61/SC 6
ISO 176:2005
Plastics -- Determination of loss of plasticizers -- Activated carbon method 90.93 TC 61/SC 6
ISO 177:1988
Plastics -- Determination of migration of plasticizers 90.60 TC 61/SC 6
ISO 178:2001
Plastics -- Determination of flexural properties 90.92 TC 61/SC 2
ISO/DIS 178
Plastics -- Determination of flexural properties 40.60 TC 61/SC 2
ISO 178:2001/Amd 1:2004
Precision statement 60.60 TC 61/SC 2
ISO/DIS 179-1
Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test 40.60 TC 61/SC 2
ISO 179-1:2000
Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test 90.92 TC 61/SC 2
ISO 179-1:2000/Amd 1:2005
60.60 TC 61/SC 2
ISO 179-2:1997
Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test 90.93 TC 61/SC 2
ISO 179-2:1997/Cor 1:1998
60.60 TC 61/SC 2
ISO 179-2:1997/DAmd 1
40.99 TC 61/SC 2
ISO/WD 180
Plastics -- Determination of Izod impact strength 20.99 TC 61/SC 2
ISO 180:2000
Plastics -- Determination of Izod impact strength 90.92 TC 61/SC 2
ISO 180:2000/Amd 1:2006
60.60 TC 61/SC 2
ISO 291:2008
Plastics -- Standard atmospheres for conditioning and testing 60.60 TC 61/SC 6
ISO 458-1:1985
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 1: General method 90.93 TC 61/SC 2
ISO/DIS 472
Plastics -- Vocabulary 40.99 TC 61/SC 1
ISO 472:1999
Plastics -- Vocabulary 90.92 TC 61/SC 1
ISO 489:1999
Plastics -- Determination of refractive index 90.60 TC 61/SC 5
ISO/CD 527-1
Plastics -- Determination of tensile properties -- Part 1: General principles 30.20 TC 61/SC 2
ISO 527-1:1993
Plastics -- Determination of tensile properties -- Part 1: General principles 90.92 TC 61/SC 2
ISO 527-1:1993/Amd 1:2005
Details of extensometer 60.60 TC 61/SC 2
ISO 527-1:1993/Cor 1:1994
60.60 TC 61/SC 2
ISO/CD 527-2
Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics 30.20 TC 61/SC 2
ISO 527-2:1993
Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics 90.92 TC 61/SC 2
ISO 527-2:1993/Cor 1:1994
60.60 TC 61/SC 2
ISO 604:2002
Plastics -- Determination of compressive properties 90.93 TC 61/SC 2
ISO 846:1997
Plastics -- Evaluation of the action of microorganisms 90.93 TC 61/SC 6
ISO 868:2003
Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness) 90.93 TC 61/SC 2
ISO 871:2006
Plastics -- Determination of ignition temperature using a hot-air furnace 90.60 TC 61/SC 4
ISO 877-1:2009
Plastics -- Methods of exposure to solar radiation -- Part 1: General guidance 60.60 TC 61/SC 6
ISO 877-2:2009
Plastics -- Methods of exposure to solar radiation -- Part 2: Direct weathering and exposure behind window glass 60.60 TC 61/SC 6
ISO 877-3:2009
Plastics -- Methods of exposure to solar radiation -- Part 3: Intensified weathering using concentrated solar radiation 60.60 TC 61/SC 6
ISO 899-1:2003
Plastics -- Determination of creep behaviour -- Part 1: Tensile creep 90.93 TC 61/SC 2
ISO 899-2:2003
Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading 90.93 TC 61/SC 2
ISO 974:2000
Plastics -- Determination of the brittleness temperature by impact 90.93 TC 61/SC 2
ISO 1043-1:2001
Plastics -- Symbols and abbreviated terms -- Part 1: Basic polymers and their special characteristics 90.92 TC 61/SC 1
ISO/DIS 1043-1
Plastics -- Symbols and abbreviated terms -- Part 1: Basic polymers and their special characteristics 40.60 TC 61/SC 1
ISO 1043-2:2000
Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials 90.92 TC 61/SC 1
ISO/DIS 1043-2
Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials 40.60 TC 61/SC 1
ISO 1043-3:1996
Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers 90.93 TC 61/SC 1
ISO 1043-4:1998
Plastics -- Symbols and abbreviated terms -- Part 4: Flame retardants 90.93 TC 61/SC 1
ISO 1147:1995
Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test 90.93 TC 61/SC 9
ISO 1183-1:2004
Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method 90.93 TC 61/SC 5
ISO 1183-2:2004
Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method 90.93 TC 61/SC 5
ISO 1183-3:1999
Plastics -- Methods for determining the density of non-cellular plastics -- Part 3: Gas pyknometer method 90.93 TC 61/SC 5
ISO 1409:2006
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of surface tension by the ring method 90.60 TC 45/SC 2
ISO 1628-1:2009
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles 60.60 TC 61/SC 5
ISO 1675:1985
Plastics -- Liquid resins -- Determination of density by the pyknometer method 90.93 TC 61/SC 5
ISO 2039-1:2001
Plastics -- Determination of hardness -- Part 1: Ball indentation method 90.93 TC 61/SC 2
ISO 2039-2:1987
Plastics -- Determination of hardness -- Part 2: Rockwell hardness 90.93 TC 61/SC 2
ISO 2115:1996
Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature 90.93 TC 61/SC 9
ISO 2555:1989
Plastics -- Resins in the liquid state or as emulsions or dispersions -- Determination of apparent viscosity by the Brookfield Test method 90.60 TC 61/SC 5
ISO 2578:1993
Plastics -- Determination of time-temperature limits after prolonged exposure to heat 90.60 TC 61/SC 6
ISO/DIS 2818
Plastics -- Preparation of test specimens by machining 40.99 TC 61/SC 9
ISO 2818:1994
Plastics -- Preparation of test specimens by machining 90.92 TC 61/SC 9
ISO 2818:1994/Cor 1:2007
60.60 TC 61/SC 9
ISO 3146:2000
Plastics -- Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods 90.93 TC 61/SC 5
ISO 3146:2000/Cor 1:2002
60.60 TC 61/SC 5
ISO 3167:2002
Plastics -- Multipurpose test specimens 90.93 TC 61/SC 2
ISO 3219:1993
Plastics -- Polymers/resins in the liquid state or as emulsions or dispersions -- Determination of viscosity using a rotational viscometer with defined shear rate 90.60 TC 61/SC 5
ISO 3251:2008
Paints, varnishes and plastics -- Determination of non-volatile-matter content 60.60 TC 35/SC 10
ISO 3451-1:2008
Plastics -- Determination of ash -- Part 1: General methods 60.60 TC 61/SC 5
ISO 3915:1981
Plastics -- Measurement of resistivity of conductive plastics 90.60 TC 61/SC 5
ISO/TR 4137:1978
Plastics -- Determination of modulus of elasticity by alternating flexure 90.93 TC 61/SC 2
ISO 4576:1996
Plastics -- Polymer dispersions -- Determination of sieve residue (gross particle and coagulum content) 90.93 TC 61/SC 9
ISO 4582:2007
Plastics -- Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources 60.60 TC 61/SC 6
ISO 4589-1:1996
Plastics -- Determination of burning behaviour by oxygen index -- Part 1: Guidance 90.93 TC 61/SC 4
ISO 4589-2:1996
Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test 90.93 TC 61/SC 4
ISO 4589-2:1996/Amd 1:2005
60.60 TC 61/SC 4
ISO 4589-3:1996
Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test 90.93 TC 61/SC 4
ISO 4611:2008
Plastics -- Determination of the effects of exposure to damp heat, water spray and salt mist 90.92 TC 61/SC 6
ISO/CD 4611
Plastics -- Determination of the effects of exposure to damp heat, water spray and salt mist 30.20 TC 61/SC 6
ISO/DIS 4892-1.2
Plastics -- Methods of exposure to laboratory light sources -- Part 1: General guidance 40.60 TC 61/SC 6
ISO 4892-1:1999
Plastics -- Methods of exposure to laboratory light sources -- Part 1: General guidance 90.92 TC 61/SC 6
ISO 4892-2:2006
Plastics -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc lamps 90.60 TC 61/SC 6
ISO 4892-2:2006/Amd 1:2009
60.60 TC 61/SC 6
ISO 4892-3:2006
Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps 90.60 TC 61/SC 6
ISO 4892-4:2004
Plastics -- Methods of exposure to laboratory light sources -- Part 4: Open-flame carbon-arc lamps 90.93 TC 61/SC 6
ISO 4892-4:2004/Cor 1:2005
60.60 TC 61/SC 6
ISO 5659-1:1996
Plastics -- Smoke generation -- Part 1: Guidance on optical-density testing 90.93 TC 61/SC 4
ISO 5659-2:2006
Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test 90.92 TC 61/SC 4
ISO/WD 5659-2
Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test 20.99 TC 61/SC 4
ISO/TR 5659-3:1999
Plastics -- Smoke generation -- Part 3: Determination of optical density by a dynamic-flow method 90.60 TC 61/SC 4
ISO 6133:1998
Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength 90.93 TC 45/SC 2
ISO 6427:1992
Plastics -- Determination of matter extractable by organic solvents (conventional methods) 90.93 TC 61/SC 5
ISO 6601:2002
Plastics -- Friction and wear by sliding -- Identification of test parameters 90.93 TC 61/SC 2
ISO 6603-1:2000
Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing 90.93 TC 61/SC 2
ISO 6603-2:2000
Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing 90.93 TC 61/SC 2
ISO 6721-1:2001
Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles 90.93 TC 61/SC 2
ISO 6721-1:2001/DAmd 1
40.99 TC 61/SC 2
ISO 6721-2:2008
Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion-pendulum method 60.60 TC 61/SC 2
ISO 6721-3:1994
Plastics -- Determination of dynamic mechanical properties -- Part 3: Flexural vibration -- Resonance-curve method 90.60 TC 61/SC 2
ISO 6721-3:1994/Cor 1:1995
60.60 TC 61/SC 2
ISO 6721-4:2008
Plastics -- Determination of dynamic mechanical properties -- Part 4: Tensile vibration -- Non-resonance method 60.60 TC 61/SC 2
ISO 6721-5:1996
Plastics -- Determination of dynamic mechanical properties -- Part 5: Flexural vibration -- Non-resonance method 90.93 TC 61/SC 2
ISO 6721-5:1996/Amd 1:2007
60.60 TC 61/SC 2
ISO 6721-6:1996
Plastics -- Determination of dynamic mechanical properties -- Part 6: Shear vibration -- Non-resonance method 90.93 TC 61/SC 2
ISO 6721-6:1996/Amd 1:2007
60.60 TC 61/SC 2
ISO 6721-7:1996
Plastics -- Determination of dynamic mechanical properties -- Part 7: Torsional vibration -- Non-resonance method 90.93 TC 61/SC 2
ISO 6721-7:1996/Amd 1:2007
60.60 TC 61/SC 2
ISO 6721-8:1997
Plastics -- Determination of dynamic mechanical properties -- Part 8: Longitudinal and shear vibration -- Wave-propagation method 90.93 TC 61/SC 2
ISO 6721-9:1997
Plastics -- Determination of dynamic mechanical properties -- Part 9: Tensile vibration -- Sonic-pulse propagation method 90.93 TC 61/SC 2
ISO 6721-9:1997/Amd 1:2007
Precision 60.60 TC 61/SC 2
ISO 6721-10:1999
Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer 90.60 TC 61/SC 2
ISO/CD 6721-11
Plastics -- Determination of dynamic mechanical properties -- Part 11: Glass transition temperature 30.99 TC 61/SC 2
ISO/FDIS 6721-12
Plastics -- Determination of dynamic mechanical properties -- Part 12: Compressive vibration -- Non-resonance method 50.00 TC 61/SC 2
ISO 8256:2004
Plastics -- Determination of tensile-impact strength 90.93 TC 61/SC 2
ISO 8660:2002
Plastics -- Determination of permanganate absorption number of caprolactam -- Spectrometric method 90.93 TC 61/SC 5
ISO 9352:1995
Plastics -- Determination of resistance to wear by abrasive wheels 90.93 TC 61/SC 2
ISO 9370:2009
Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method 60.60 TC 61/SC 6
ISO 9773:1998
Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source 90.92 TC 61/SC 4
ISO 9773:1998/Amd 1:2003
Specimens 60.60 TC 61/SC 4
ISO 10093:1998
Plastics -- Fire tests -- Standard ignition sources 90.92 TC 61/SC 4
ISO/DIS 10210
Plastics -- Preparation of samples for biodegradation testing 40.20 TC 61/SC 5
ISO/CD 10640
Plastics -- Guidance on the assessment of accelerated photoageing 30.60 TC 61/SC 6
ISO 10840:2008
Plastics -- Guidance for the use of standard fire tests 60.60 TC 61/SC 4
ISO/DIS 10927
Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDITOF-MS) 40.20 TC 61/SC 5
ISO/FDIS 11357-1
Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles 50.20 TC 61/SC 5
ISO 11357-1:1997
Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles 90.92 TC 61/SC 5
ISO 11357-2:1999
Plastics -- Differential scanning calorimetry (DSC) -- Part 2: Determination of glass transition temperature 90.60 TC 61/SC 5
ISO 11357-3:1999
Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization 90.92 TC 61/SC 5
ISO/DIS 11357-3
Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization 40.93 TC 61/SC 5
ISO 11357-3:1999/Amd 1:2005
60.60 TC 61/SC 5
ISO 11357-4:2005
Plastics -- Differential scanning calorimetry (DSC) -- Part 4: Determination of specific heat capacity 90.93 TC 61/SC 5
ISO 11357-5:1999
Plastics -- Differential scanning calorimetry (DSC) -- Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion 90.60 TC 61/SC 5
ISO 11357-6:2008
Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) 60.60 TC 61/SC 5
ISO 11357-7:2002
Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics 90.93 TC 61/SC 5
ISO 11358:1997
Plastics -- Thermogravimetry (TG) of polymers -- General principles 90.60 TC 61/SC 5
ISO 11358-2:2005
Plastics -- Thermogravimetry (TG) of polymers -- Part 2: Determination of activation energy 90.93 TC 61/SC 5
ISO 11359-1:1999
Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles 90.60 TC 61/SC 5
ISO 11359-2:1999
Plastics -- Thermomechanical analysis (TMA) -- Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature 90.60 TC 61/SC 5
ISO 11359-3:2002
Plastics -- Thermomechanical analysis (TMA) -- Part 3: Determination of penetration temperature 90.93 TC 61/SC 5
ISO 11403-1:2001
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties 90.93 TC 61/SC 2
ISO 11403-2:2004
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 2: Thermal and processing properties 90.93 TC 61/SC 2
ISO 11403-2:2004/CD Amd 1
30.99 TC 61/SC 2
ISO 11403-3:1999
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties 90.60 TC 61/SC 2
ISO 11443:2005
Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers 90.93 TC 61/SC 5
ISO 11469:2000
Plastics -- Generic identification and marking of plastics products 90.93 TC 61/SC 1
ISO 11907-1:1998
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 1: Guidance 90.93 TC 61/SC 4
ISO 11907-2:1995
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 2: Static method 90.93 TC 61/SC 4
ISO 11907-3:1998
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 3: Dynamic decomposition method using a travelling furnace 90.93 TC 61/SC 4
ISO 11907-4:1998
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 4: Dynamic decomposition method using a conical radiant heater 90.93 TC 61/SC 4
ISO 12058-1:1997
Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method 90.93 TC 61/SC 5
ISO 12992:1995
Plastics -- Vertical flame spread determination for film and sheet 90.93 TC 61/SC 4
ISO 13468-1:1996
Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 1: Single-beam instrument 90.93 TC 61/SC 5
ISO 13468-2:1999
Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 2: Double-beam instrument 90.60 TC 61/SC 5
ISO 13586:2000
Plastics -- Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach 90.93 TC 61/SC 2
ISO 13586:2000/Amd 1:2003
Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres 60.60 TC 61/SC 2
ISO 13741-1:1998
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 1: Direct liquid injection method 90.93 TC 61/SC 9
ISO 13741-2:1998
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 2: Headspace method 90.93 TC 61/SC 9
ISO 13927:2001
Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector 90.92 TC 61/SC 4
ISO 14782:1999
Plastics -- Determination of haze for transparent materials 90.60 TC 61/SC 5
ISO 14782:1999/Cor 1:2005
60.60 TC 61/SC 5
ISO 14851:1999
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by measuring the oxygen demand in a closed respirometer 90.60 TC 61/SC 5
ISO 14851:1999/Cor 1:2005
60.60 TC 61/SC 5
ISO 14852:1999
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by analysis of evolved carbon dioxide 90.93 TC 61/SC 5
ISO 14852:1999/Cor 1:2005
60.60 TC 61/SC 5
ISO 14853:2005
Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system -- Method by measurement of biogas production 90.93 TC 61/SC 5
ISO 14853:2005/Cor 1:2009
60.60 TC 61/SC 5
ISO 14855-1:2005
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 1: General method 90.93 TC 61/SC 5
ISO 14855-1:2005/Cor 1:2009
60.60 TC 61/SC 5
ISO 14855-2:2007
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test 60.60 TC 61/SC 5
ISO 14855-2:2007/Cor 1:2009
60.60 TC 61/SC 5
ISO 15033:2007
Plastics -- Determination of caprolactam and its cyclic and linear oligomers by HPLC 60.60 TC 61/SC 5
ISO 15270:2008
Plastics -- Guidelines for the recovery and recycling of plastics waste 60.60 TC 61
ISO 15314:2004
Plastics -- Methods for marine exposure 90.93 TC 61/SC 6
ISO 15512:2008
Plastics -- Determination of water content 60.60 TC 61/SC 5
ISO 15791-1:2002
Plastics -- Development and use of intermediate-scale fire tests for plastics products -- Part 1: General guidance 90.92 TC 61/SC 4
ISO 15850:2002
Plastics -- Determination of tension-tension fatigue crack propagation -- Linear elastic fracture mechanics (LEFM) approach 90.93 TC 61/SC 2
ISO 15985:2004
Plastics -- Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions -- Method by analysis of released biogas 90.93 TC 61/SC 5
ISO 15985:2004/Cor 1:2007
60.60 TC 61/SC 5
ISO 16012:2004
Plastics -- Determination of linear dimensions of test specimens 90.93 TC 61/SC 2
ISO 16012:2004/Cor 1:2005
60.60 TC 61/SC 2
ISO 16014-1:2003
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles 90.92 TC 61/SC 5
ISO/DIS 16014-1
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles 40.20 TC 61/SC 5
ISO 16014-1:2003/Cor 1:2005
60.60 TC 61/SC 5
ISO 16014-2:2003
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method 90.92 TC 61/SC 5
ISO/DIS 16014-2
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method 40.20 TC 61/SC 5
ISO/DIS 16014-3
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method 40.20 TC 61/SC 5
ISO 16014-3:2003
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method 90.92 TC 61/SC 5
ISO/DIS 16014-4
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method 40.20 TC 61/SC 5
ISO 16014-4:2003
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method 90.92 TC 61/SC 5
ISO/DIS 16014-5
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Light-scattering method 40.20 TC 61/SC 5
ISO 16152:2005
Plastics -- Determination of xylene-soluble matter in polypropylene 90.93 TC 61/SC 9
ISO 16869:2008
Plastics -- Assessment of the effectiveness of fungistatic compounds in plastics formulations 60.60 TC 61/SC 6
ISO 16929:2002
Plastics -- Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test 90.93 TC 61/SC 5
ISO 17088:2008
Specifications for compostable plastics 60.60 TC 61/SC 5
ISO 17281:2002
Plastics -- Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s) 90.93 TC 61/SC 2
ISO 17282:2004
Plastics -- Guide to the acquisition and presentation of design data 90.93 TC 61/SC 2
ISO 17422:2002
Plastics -- Environmental aspects -- General guidelines for their inclusion in standards 90.93 TC 61
ISO 17556:2003
Plastics -- Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved 90.93 TC 61/SC 5
ISO 17744:2004
Plastics -- Determination of specific volume as a function of temperature and pressure (pvT diagram) -- Piston apparatus method 90.93 TC 61/SC 5
ISO/WD 18874
Plastics -- Determination of fracture toughness under plane-stress conditions 20.99 TC 61/SC 2
ISO/TR 19032:2006
Plastics -- Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions 60.60 TC 61/SC 6
ISO 19252:2008
Plastics -- Determination of scratch properties 60.60 TC 61/SC 2
ISO 20200:2004
Plastics -- Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test 90.93 TC 61/SC 5
ISO 20753:2008
Plastics -- Test specimens 60.60 TC 61/SC 2
ISO 20965:2005
Plastics -- Determination of the transient extensional viscosity of polymer melts 90.93 TC 61/SC 5
ISO 21367:2007
Plastics -- Reaction to fire -- Test method for flame spread and combustion product release from vertically oriented specimens 60.60 TC 61/SC 4
ISO 21509:2006
Plastics and ebonite -- Verification of Shore durometers 90.60 TC 61/SC 2
ISO 22007-1:2009
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 1: General principles 60.60 TC 61/SC 5
ISO 22007-2:2008
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 2: Transient plane heat source (hot disc) method 60.60 TC 61/SC 5
ISO 22007-3:2008
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 3: Temperature wave analysis method 60.60 TC 61/SC 5
ISO 22007-4:2008
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 4: Laser flash method 60.60 TC 61/SC 5
ISO/CD TR 22007-5
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 5: Determination of thermal conductivity and thermal diffusivity of poly(methyl methacrylate) 30.99 TC 61/SC 5
ISO 22088-1:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 1: General guidance 90.60 TC 61/SC 6
ISO 22088-2:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 2: Constant tensile load method 90.60 TC 61/SC 6
ISO 22088-3:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 3: Bent strip method 90.60 TC 61/SC 6
ISO 22088-4:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 4: Ball or pin impression method 90.60 TC 61/SC 6
ISO 22088-5:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 5: Constant tensile deformation method 90.60 TC 61/SC 6
ISO 22088-6:2006
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 6: Slow strain rate method 90.60 TC 61/SC 6
ISO 22196:2007
Plastics -- Measurement of antibacterial activity on plastics surfaces 90.92 TC 61/SC 6
ISO/DIS 25337
Plastics -- Production quality control -- Statistical method for using single measurements 40.99 TC 61/SC 5
ISO 25762:2009
Plastics -- Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites 60.60 TC 61/SC 4
ISO/WD 28926
Plastics -- Method for determining the flammability characteristics of plastics using microcalorimetry 20.99 TC 61/SC 4
ISO/WD 29221
Plastics -- Determination of mode I plane-strain crack-arrest toughness 20.99 TC 61/SC 2
ISO/DIS 29664
Plastics -- Artificial weathering including acidic deposition 40.20 TC 61/SC 6
ISO/CD 30021-2
Fire safety -- Intermediate-scale fire-resistance tests -- Part 2: Tests for fibre-reinforced polymer composites 30.92 TC 92/SC 2
387IEC 60695-11-10:1999
Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods 60.60 TC 61/SC 4
388IEC 60695-11-10:1999/Amd 1:2003
60.60 TC 61/SC 4
389IEC 60695-11-20:1999
Fire hazard testing -- Part 11-20: Test flames -- 500 W flame test methods 60.60 TC 61/SC 4
390IEC 60695-11-20:1999/Amd 1:2003
60.60 TC 61/SC 4

83.080.10 Thermosetting materials
Including ebonite
Silicones, see 71.100.55
Standard and/or project TC
ISO 60:1977
Plastics -- Determination of apparent density of material that can be poured from a specified funnel 90.93 TC 61/SC 12
ISO 61:1976
Plastics -- Determination of apparent density of moulding material that cannot be poured from a specified funnel 90.93 TC 61/SC 12
ISO 75-2:2004
Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite 90.93 TC 61/SC 2
ISO 75-3:2004
Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics 90.93 TC 61/SC 2
ISO 119:1977
Plastics -- Phenol-formaldehyde mouldings -- Determination of free phenols -- Iodometric method 90.93 TC 61/SC 12
ISO 120:1977
Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Colorimetric comparison method 90.93 TC 61/SC 12
ISO 172:1978
Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia 90.93 TC 61/SC 12
ISO 295:2004
Plastics -- Compression moulding of test specimens of thermosetting materials 90.93 TC 61/SC 12
ISO 308:1994
Plastics -- Phenolic moulding materials -- Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) 90.93 TC 61/SC 12
ISO 584:1982
Plastics -- Unsaturated polyester resins -- Determination of reactivity at 80 degrees C (conventional method) 90.93 TC 61/SC 12
ISO 1628-5:1998
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers 90.93 TC 61/SC 9
ISO 2114:2000
Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value 90.93 TC 61/SC 12
ISO 2535:2001
Plastics -- Unsaturated-polyester resins -- Measurement of gel time at ambient temperature 90.93 TC 61/SC 12
ISO 2554:1997
Plastics -- Unsaturated polyester resins -- Determination of hydroxyl value 90.93 TC 61/SC 12
ISO 2577:2007
Plastics -- Thermosetting moulding materials -- Determination of shrinkage 60.60 TC 61/SC 12
ISO 3001:1999
Plastics -- Epoxy compounds -- Determination of epoxy equivalent 90.93 TC 61/SC 12
ISO 3521:1997
Plastics -- Unsaturated polyester and epoxy resins -- Determination of overall volume shrinkage 90.93 TC 61/SC 12
ISO 3521:1997/Cor 1:2003
60.60 TC 61/SC 12
ISO 3671:1976
Plastics -- Aminoplastic moulding materials -- Determination of volatile matter 90.93 TC 61/SC 12
ISO 3672-1:2000
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 1: Designation system 90.93 TC 61/SC 12
ISO 3672-2:2000
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 12
ISO 3673-1:1996
Plastics -- Epoxy resins -- Part 1: Designation 90.93 TC 61/SC 12
ISO 3673-2:2007
Plastics -- Epoxy resins -- Part 2: Preparation of test specimens and determination of properties 60.60 TC 61/SC 12
ISO 4597-1:2005
Plastics -- Hardeners and accelerators for epoxy resins -- Part 1: Designation 90.93 TC 61/SC 12
ISO 4614:1977
Plastics -- Melamine-formaldehyde mouldings -- Determination of extractable formaldehyde 90.93 TC 61/SC 12
ISO 4615:1979
Plastics -- Unsaturated polyesters and epoxide resins -- Determination of total chlorine content 90.93 TC 61/SC 12
ISO 4895:1997
Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize 90.93 TC 61/SC 12
ISO 7327:1994
Plastics -- Hardeners and accelerators for epoxide resins -- Determination of free acid in acid anhydride 90.93 TC 61/SC 12
ISO 7808:1992
Plastics -- Thermosetting moulding materials -- Determination of transfer flow 90.93 TC 61/SC 12
ISO 8619:2003
Plastics -- Phenolic resin powder -- Determination of flow distance on a heated glass plate 90.93 TC 61/SC 12
ISO 8974:2002
Plastics -- Phenolic resins -- Determination of residual phenol content by gas chromatography 90.93 TC 61/SC 12
ISO 8975:1989
Plastics -- Phenolic resins -- Determination of pH 90.60 TC 61/SC 12
ISO 8987:2005
Plastics -- Phenolic resins -- Determination of reactivity on a B-transformation test plate 90.93 TC 61/SC 12
ISO 8988:2006
Plastics -- Phenolic resins -- Determination of hexamethylenetetramine content -- Kjeldahl method, perchloric acid method and hydrochloric acid method 90.60 TC 61/SC 12
ISO 8989:1995
Plastics -- Liquid phenolic resins -- Determination of water miscibility 90.93 TC 61/SC 12
ISO/TR 9372:1993
Plastics -- Basic materials for polyurethanes -- Determination of the amounts of 2,4- and 2,6-isomers in toluenediisocyanate by infrared spectroscopy 90.93 TC 61/SC 12
ISO 9396:1997
Plastics -- Phenolic resins -- Determination of the gel time of resols under specific conditions using automatic apparatus 90.93 TC 61/SC 12
ISO 9702:1996
Plastics -- Amine epoxide hardeners -- Determination of primary, secondary and tertiary amine group nitrogen content 90.93 TC 61/SC 12
ISO 9771:1995
Plastics -- Phenolic resins -- Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions 90.93 TC 61/SC 12
ISO 9944:1990
Plastics -- Phenolic resins -- Determination of electrical conductivity of resin extracts 90.93 TC 61/SC 12
ISO 9944:1990/Cor 1:1997
60.60 TC 61/SC 12
ISO 10082:1999
Plastics -- Phenolic resins -- Classification and test methods 90.93 TC 61/SC 12
ISO 10724-1:1998
Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 1: General principles and moulding of multipurpose test specimens 90.93 TC 61/SC 12
ISO 10724-2:1998
Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 2: Small plates 90.93 TC 61/SC 12
ISO 11248:1993
Plastics -- Thermosetting moulding materials -- Evaluation of short-term performance at elevated temperatures 90.93 TC 61/SC 12
ISO 11401:1993
Plastics -- Phenolic resins -- Separation by liquid chromatography 90.93 TC 61/SC 12
ISO 11402:2004
Phenolic, amino and condensation resins -- Determination of free-formaldehyde content 90.93 TC 61/SC 12
ISO 11409:1993
Plastics -- Phenolic resins -- Determination of heats and temperatures of reaction by differential scanning calorimetry 90.93 TC 61/SC 12
ISO 14526-1:1999
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 12
ISO 14526-2:1999
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 12
ISO 14526-3:1999
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 3: Requirements for selected moulding compounds 90.93 TC 61/SC 12
ISO 14527-1:1999
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 12
ISO 14527-2:1999
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 12
ISO 14527-3:1999
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 3: Requirements for selected moulding compounds 90.93 TC 61/SC 12
ISO 14528-1:1999
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 12
ISO 14528-2:1999
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 12
ISO 14528-3:1999
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds 90.93 TC 61/SC 12
ISO 14529-1:1999
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 12
ISO 14529-2:1999
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 12
ISO 14529-3:1999
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 3: Requirements for selected moulding compounds 90.93 TC 61/SC 12
ISO 14530-1:1999
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 12
ISO 14530-2:1999
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 12
ISO 14530-3:1999
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 3: Requirements for selected moulding compounds 90.93 TC 61/SC 12
ISO 14848:1998
Plastics -- Unsaturated-polyester resins -- Determination of reactivity at 130 degrees C 90.93 TC 61/SC 12
ISO 14849:1999
Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Indophenol method 90.93 TC 61/SC 12
ISO 14896:2009
Plastics -- Polyurethane raw materials -- Determination of isocyanate content 60.60 TC 61/SC 12
ISO 14896:2006/Amd 1:2007
Acceptable variations in the procedure for method B 60.60 TC 61/SC 12
ISO 14897:2002
Plastics -- Polyols for use in the production of polyurethane -- Determination of water content 90.93 TC 61/SC 12
ISO 14898:1999
Plastics -- Aromatic isocyanates for use in the production of polyurethane -- Determination of acidity 90.60 TC 61/SC 12
ISO 14899:2001
Plastics -- Polyols for use in the production of polyurethane -- Determination of basicity 90.93 TC 61/SC 12
ISO 14900:2001
Plastics -- Polyols for use in the production of polyurethane -- Determination of hydroxyl number 90.93 TC 61/SC 12
ISO 14900:2001/Cor 1:2005
60.60 TC 61/SC 12
ISO 15028:2004
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of hydrolysable chlorine 90.93 TC 61/SC 12
ISO/DIS 15063
Plastics -- Polyols for use in the production of polyurethanes -- Determination of hydroxyl number by NIR spectroscopy 40.20 TC 61/SC 12
ISO 15063:2004
Plastics -- Polyols for use in the production of polyurethanes -- Determination of hydroxyl number by NIR spectroscopy 90.92 TC 61/SC 12
ISO 15064:2004
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of the isomer ratio in toluenediisocyanate 90.93 TC 61/SC 12
ISO 15252-1:1999
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 1: Designation system and basis for specifications 90.93 TC 61/SC 12
ISO 15252-2:1999
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 2: Preparation of test specimens and determination of properties 90.93 TC 61/SC 12
ISO 15252-3:1999
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 3: Requirements for selected moulding compounds 90.93 TC 61/SC 12





http://www.int-bizdirectory.com/standards.htm