Lastest & Cheapest ISO Standards In PDF (45)

http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.

ICS Field
ISO 4433-3:1997
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes 90.93 TC 138/SC 3
ISO 4433-4:1997
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 4: Poly(vinylidene fluoride) (PVDF) pipes 90.93 TC 138/SC 3
ISO 4435:2003
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U) 90.60 TC 138/SC 1
ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density 90.93 TC 138/SC 5
ISO 6259-1:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method 90.93 TC 138/SC 5
ISO 6259-2:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) 90.93 TC 138/SC 5
ISO 6259-3:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes 90.93 TC 138/SC 5
ISO 6964:1986
Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification 90.93 TC 138/SC 5
ISO/TS 7024:2005
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Thermoplastics -- Recommended practice for installation 90.60 TC 138/SC 1
ISO/TR 7073:1988
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers 90.60 TC 138/SC 1
ISO/TR 7074:1986
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage 90.20 TC 138/SC 1
ISO 7245:1984
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials 90.93 TC 138/SC 5
ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials 90.93 TC 138/SC 5
ISO 7432:2002
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals 90.93 TC 138/SC 6
ISO 7509:2000
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure 90.93 TC 138/SC 6
ISO 7510:1997
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method 90.93 TC 138/SC 6
ISO 7511:1999
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure 90.93 TC 138/SC 6
ISO 7671:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polypropylene (PP) 90.93 TC 138/SC 1
ISO 7675:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Chlorinated poly(vinyl chloride) (PVC-C) 90.60 TC 138/SC 1
ISO 7682:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Acrylonitrile-butadiene-styrene (ABS) 90.93 TC 138/SC 1
ISO 7684:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions 90.93 TC 138/SC 6
ISO 7685:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness 90.93 TC 138/SC 6
ISO 7686:2005
Plastics pipes and fittings -- Determination of opacity 90.93 TC 138/SC 5
ISO 8283-1:1991
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) 90.93 TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE) 90.93 TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP) 90.93 TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS) 90.93 TC 138/SC 1
ISO 8361-1:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method 90.93 TC 138/SC 5
ISO 8361-2:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings 90.60 TC 138/SC 5
ISO 8361-3:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings 90.93 TC 138/SC 5
ISO 8483:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints 90.60 TC 138/SC 6
ISO 8513:2000
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of longitudinal tensile properties 90.92 TC 138/SC 6
ISO 8521:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength 90.92 TC 138/SC 6
ISO/FDIS 8521
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial circumferential tensile strength 50.20 TC 138/SC 6
ISO 8533:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped joints 90.60 TC 138/SC 6
ISO 8770:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polyethylene (PE) 90.93 TC 138/SC 1
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE) 60.60 TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP) 60.60 TC 138/SC 1
ISO/DIS 8779
Plastics piping systems -- Polyethylene (PE) pipes for irrigation -- Specifications 40.60 TC 138/SC 2
ISO 8779:2001
Polyethylene (PE) pipes for irrigation laterals -- Specifications 90.92 TC 138/SC 2
ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints 90.93 TC 138/SC 5
ISO 8796:2004
Polyethylene PE 32 and PE 40 pipes for irrigation laterals -- Susceptibility to environmental stress cracking induced by insert-type fittings -- Test method and requirements 90.93 TC 138/SC 2
ISO 9080:2003
Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 90.92 TC 138/SC 5
ISO/CD 9080
Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 30.60 TC 138/SC 5
ISO 9852:2007
Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method 60.60 TC 138/SC 5
ISO 9854-1:1994
Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 1: General test method 90.93 TC 138/SC 5
ISO 9854-2:1994
Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 2: Test conditions for pipes of various materials 90.93 TC 138/SC 5
ISO 9896:1996
Plastics traps for discharge pipework systems inside buildings 90.93 TC 138/SC 1
ISO 9967:2007
Thermoplastics pipes -- Determination of creep ratio 60.60 TC 138/SC 5
ISO 9969:2007
Thermoplastics pipes -- Determination of ring stiffness 60.60 TC 138/SC 5
ISO 10146:1997
Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength 90.93 TC 138/SC 5
ISO 10147:2004
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content 90.93 TC 138/SC 5
ISO 10147:2004/Amd 1:2008
60.60 TC 138/SC 5
ISO/TR 10358:1993
Plastics pipes and fittings -- Combined chemical-resistance classification table 90.93 TC 138/SC 3
ISO 10466:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection 90.93 TC 138/SC 6
ISO 10467:2004
Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin 90.93 TC 138/SC 6
ISO 10467:2004/DAmd 1
40.99 TC 138/SC 6
ISO 10468:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor 90.60 TC 138/SC 6
ISO 10471:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions 90.60 TC 138/SC 6
ISO/TR 10501:1993
Thermoplastics pipes for the transport of liquids under pressure -- Calculation of head losses 90.93 TC 138/SC 2
ISO 10508:2006
Plastics piping systems for hot and cold water installations -- Guidance for classification and design 90.20 TC 138/SC 2
ISO 10639:2004
Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin 90.93 TC 138/SC 6
ISO 10639:2004/DAmd 1
40.99 TC 138/SC 6
ISO 10928:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use 90.92 TC 138/SC 6
ISO/FDIS 10928
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use 50.00 TC 138/SC 6
ISO 10952:2008
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition 60.60 TC 138/SC 6
ISO/CD 10986
Plasitcs piping systems for pressure and non-pressure applications -- Installation of pipes above ground -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin 30.60 TC 138/SC 6
ISO 11173:1994
Thermoplastics pipes -- Determination of resistance to external blows -- Staircase method 90.93 TC 138/SC 5
ISO/FDIS 11296-1
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General 50.00 TC 138
ISO/FDIS 11296-3
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes 50.00 TC 138
ISO/FDIS 11296-4
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-places pipes 50.00 TC 138
ISO/DIS 11298-1
Plastics piping systems for renovation of underground water supply networks -- Part 1: General 40.99 TC 138
ISO/DIS 11298-3
Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit-pipes 40.99 TC 138
ISO/NP 11299-1
Plastics piping systems for renovation of underground gas supply networks -- Part 1: General 10.99 TC 138
ISO/NP 11299-3
Plastics piping systems for renovation of underground gas supply networks -- Part 3: Limning with close-fit pipes 10.99 TC 138
ISO/AWI 11619
Specification for polyurethane tubing for use primarily in pneumatic installations 20.00 TC 45/SC 1
ISO 11673:2005
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes -- Determination of the fracture toughness properties 90.93 TC 138/SC 5
ISO 11922-1:1997
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series 90.93 TC 138
ISO 11922-2:1997
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 2: Inch-based series 90.93 TC 138
ISO 12091:1995
Structured-wall thermoplastics pipes -- Oven test 90.93 TC 138/SC 5
ISO 12162:1995
Thermoplastics materials for pipes and fittings for pressure applications -- Classification and designation -- Overall service (design) coefficient 90.92 TC 138/SC 5
ISO/FDIS 12162
Thermoplastics materials for pipes and fittings for pressure applications -- Classification, design coefficient, and designation 50.00 TC 138/SC 5
ISO 12176-1:2006
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion 60.60 TC 138/SC 4
ISO 12176-2:2008
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion 60.60 TC 138/SC 4
ISO 12176-3:2006
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge 90.20 TC 138/SC 4
ISO 12176-4:2003
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding 90.60 TC 138/SC 4
ISO 12230:1996
Polybutene (PB) pipes -- Effect of time and temperature on the expected strength 90.93 TC 138/SC 5
ISO/NP 13147
Plastics pipes and fittings ? Slow peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 50 mm 10.99 TC 138/SC 5
ISO/DIS 13229
Thermoplastics piping systems for non-pressure applications -- Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings -- Determination of the viscosity number and K-value 40.20 TC 138/SC 1
ISO/DIS 13254
Thermoplastics piping systems for non-pressure applications -- Test method for watertightness 40.20 TC 138/SC 1
ISO/DIS 13255
Thermoplastics piping systems for soil and waste discharge inside buildings -- Test method for airtightness of joints 40.20 TC 138/SC 1
ISO/DIS 13257
Thermoplastics piping systems for non pressure applications -- Test method for resistance to elevated temperature cycling 40.20 TC 138/SC 1
ISO/DIS 13259
Thermoplastics piping systems for underground non-pressure applications -- Test method for leaktightness of elastomeric sealing ring type joints 40.20 TC 138/SC 1
ISO/DIS 13260
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading 40.20 TC 138/SC 1
ISO/DIS 13262
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam 40.20 TC 138/SC 1
ISO/DIS 13263
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength 40.20 TC 138/SC 1
ISO/DIS 13264
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings 40.20 TC 138/SC 1
ISO/DIS 13265
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure 40.20 TC 138/SC 1
ISO/DIS 13266
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading 40.20 TC 138/SC 1
ISO/DIS 13267
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test method for buckling resistance 40.20 TC 138/SC 1
ISO/DIS 13268
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness 40.20 TC 138/SC 1
ISO/DIS 13272
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations 40.20 TC 138/SC 1
ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Small-scale steady-state test (S4 test) 60.60 TC 138/SC 5
ISO 13478:2007
Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Full-scale test (FST) 60.60 TC 138/SC 5
ISO/FDIS 13479
Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes 50.00 TC 138/SC 5
ISO 13479:1997
Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes (notch test) 90.92 TC 138/SC 5
ISO 13480:1997
Polyethylene pipes -- Resistance to slow crack growth -- Cone test method 90.93 TC 138/SC 5
ISO 13760:1998
Plastics pipes for the conveyance of fluids under pressure -- Miner's rule -- Calculation method for cumulative damage 90.93 TC 138/SC 5
ISO 13761:1996
Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C 90.93 TC 138/SC 5
ISO 13844:2000
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure 90.93 TC 138/SC 2
ISO 13845:2000
Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection 90.93 TC 138/SC 2
ISO 13950:2007
Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints 60.60 TC 138/SC 4
ISO 13950:2007/Cor 1:2008
60.60 TC 138/SC 4
ISO 13966:1998
Thermoplastics pipes and fittings -- Nominal ring stiffnesses 90.93 TC 138
ISO 13968:2008
Plastics piping and ducting systems -- Thermoplastics pipes -- Determination of ring flexibility 60.60 TC 138/SC 5
ISO 14236:2000
Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems 90.93 TC 138/SC 2
ISO 14531-1:2002
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes 90.93 TC 138/SC 4
ISO 14531-2:2004
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing 90.93 TC 138/SC 4
ISO 14531-3:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) 90.20 TC 138/SC 4
ISO 14531-4:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 4: System design and installation guidelines 90.20 TC 138/SC 4
ISO 14828:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor 90.60 TC 138/SC 6
ISO 15306:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure 90.93 TC 138/SC 6
ISO 15439-1:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 1: General 60.60 TC 138/SC 4
ISO 15439-2:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 2: Pipes 60.60 TC 138/SC 4
ISO 15439-3:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 3: Fittings 60.60 TC 138/SC 4
ISO/NP 15874-1
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General 10.99 TC 138/SC 2
ISO 15874-1:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General 90.92 TC 138/SC 2
ISO 15874-1:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15874-2:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes 90.92 TC 138/SC 2
ISO/NP 15874-2
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes 10.99 TC 138/SC 2
ISO 15874-2:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15874-5:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system 90.92 TC 138/SC 2
ISO/NP 15874-5
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system 10.99 TC 138/SC 2
ISO 15875-2:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 2: Pipes 90.93 TC 138/SC 2
ISO 15875-2:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15875-5:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 5: Fitness for purpose of the system 90.93 TC 138/SC 2
ISO 15875-5:2003/Cor 1:2007
60.60 TC 138/SC 2
ISO/TS 15875-7:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity 90.20 TC 138/SC 2
ISO 15876-2:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 2: Pipes 90.93 TC 138/SC 2
ISO 15876-2:2003/Amd 1:2007
60.60 TC 138/SC 2
ISO 15876-5:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 5: Fitness for purpose of the system 90.93 TC 138/SC 2
ISO/TS 15876-7:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 7: Guidance for the assessment of conformity 90.20 TC 138/SC 2
ISO 15877-1:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General 60.60 TC 138/SC 2
ISO 15877-1:2009/CD Amd 1
30.99 TC 138/SC 2
ISO 15877-2:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes 60.60 TC 138/SC 2
ISO 15877-2:2009/CD Amd 1
30.99 TC 138/SC 2
ISO 15877-5:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system 60.60 TC 138/SC 2
ISO 15877-5:2009/CD Amd 1
30.99 TC 138/SC 2
ISO/TS 15877-7:2003
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity 90.92 TC 138/SC 2
ISO/PRF TS 15877-7
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity 50.20 TC 138/SC 2
ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) 90.93 TC 138/SC 5
ISO 16422:2006
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications 90.20 TC 138/SC 2
ISO 16871:2003
Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering 90.93 TC 138/SC 5
ISO/TR 16913:1999
Plastics pipes and fittings -- Definitions of types of test 90.20 TC 138/SC 5
ISO 17454:2006
Plastics piping systems -- Multilayer pipes -- Test method for the adhesion of the different layers using a pulling rig 90.20 TC 138/SC 5
ISO 17455:2005
Plastics piping systems -- Multilayer pipes -- Determination of the oxygen permeability of the barrier pipe 90.60 TC 138/SC 5
ISO 17455:2005/Cor 1:2007
60.60 TC 138/SC 5
ISO 17456:2006
Plastics piping systems -- Multilayer pipes -- Determination of long-term strength 60.60 TC 138/SC 5
ISO 17484-1:2006
Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems 60.60 TC 138/SC 4
ISO 17484-1:2006/Cor 1:2008
60.60 TC 138/SC 4
ISO 17484-2:2009
Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice 60.60 TC 138/SC 4
ISO/TR 18124:2006
Plastics piping systems -- Multilayer M (metal) pipes -- Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone 60.60 TC 138/SC 5
ISO 18225:2007
Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems 60.60 TC 138/SC 4
ISO/TS 18226:2006
Plastics pipes and fittings -- Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) 60.60 TC 138/SC 4
ISO 18373-1:2007
Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 1: Measurement of the processing temperature 60.60 TC 138/SC 5
ISO 18373-2:2008
Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 2: Measurement of the enthalpy of fusion of crystallites 60.60 TC 138/SC 5
ISO 18553:2002
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds 90.93 TC 138/SC 5
ISO 18553:2002/Amd 1:2007
60.60 TC 138/SC 5
ISO 18672-1
Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints 60.00 TC 138/SC 6
ISO 19220:2004
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Styrene copolymer blends (SAN + PVC) 90.93 TC 138/SC 1
ISO/TR 19480:2005
Polyethylene pipes and fittings for the supply of gaseous fuels or water -- Training and assessment of fusion operators 60.60 TC 138/SC 4
ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 2: Pipes 60.60 TC 138/SC 2
ISO/TS 21003-7:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity 60.60 TC 138/SC 2
ISO 21004:2006
Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply 60.60 TC 138/SC 2
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system 60.60 TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A 60.60 TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B 60.60 TC 138/SC 1
ISO 21307:2009
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems 60.60 TC 138/SC 4
ISO/DIS 21751
Plastics pipes and fittings -- Determination of cohesive resistance -- Strip-bend test for electrofusion assemblies 40.20 TC 138/SC 5
ISO 22391-2:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes 90.92 TC 138/SC 2
ISO/DIS 22391-2
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes 40.99 TC 138/SC 2
ISO/CD 23228
Thermoplastics pipes for the conveyance of fluids -- Determination of the stress-rupture resistance of pipe resin materials by the use of plain strain tensile (PSGT) specimens 30.60 TC 138/SC 5
ISO 24033:2009
Polyethylene of raised temperature resistance (PE-RT) pipes -- Effect of time and temperature on the expected strength 60.60 TC 138/SC 5
ISO/DIS 25780
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques 40.00 TC 138/SC 6
ISO/CD TR 26873
Plastics pipes and fittings -- Definition and construction procedures for reference lines 30.60 TC 138/SC 5
ISO/CD 29561-1
Plastics piping systems -- Glass fibre reinforced polyethylene (PE-GF) piping systems for water supply -- Part 1: General 30.20 TC 138/SC 2
ISO/CD 29561-2
Plastics piping systems -- Glass fibre reinforced polyethylene (PE-GF) piping systems for water supply -- Part 2: Pipes 30.20 TC 138/SC 2

23.040.40 Metal fittings
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 49:1994
Malleable cast iron fittings threaded to ISO 7-1 90.93 TC 5/SC 5
ISO 49:1994/Cor 1:1997
60.60 TC 5/SC 5
ISO 2016:1981
Capillary solder fittings for copper tubes -- Assembly dimensions and tests 90.93 TC 5/SC 5
ISO 3419:1981
Non-alloy and alloy steel butt-welding fittings 90.92 TC 5/SC 5
ISO 3545-3:1989
Steel tubes and fittings -- Symbols for use in specifications -- Part 3: Tubular fittings with circular cross-section 90.93 TC 5/SC 1
ISO 4144:2003
Pipework -- Stainless steel fittings threaded in accordance with ISO 7-1 90.93 TC 5/SC 5
ISO 4145:1986
Non-alloy steel fittings threaded to ISO 7-1 90.93 TC 5/SC 5
ISO 5251:1981
Stainless steel butt-welding fittings 90.93 TC 5/SC 5
ISO 5256:1985
Steel pipes and fittings for buried or submerged pipe lines -- External and internal coating by bitumen or coal tar derived materials 90.93 TC 5/SC 1
ISO 6761:1981
Steel tubes -- Preparation of ends of tubes and fittings for welding 90.93 TC 5/SC 1

23.040.45 Plastics fittings
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 264:1976
Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure -- Laying lengths -- Metric series 90.93 TC 138/SC 2
ISO 264:1976/Add 1:1982
Diameters 200 mm and 225 mm 60.60 TC 138/SC 2
ISO 265-1:1988
Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) 90.93 TC 138/SC 1
ISO 580:2005
Plastics piping and ducting systems -- Injection-moulded thermoplastics fittings -- Methods for visually assessing the effects of heating 90.93 TC 138/SC 5
ISO 727-1:2002
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 1: Metric series 90.93 TC 138/SC 2
ISO 727-2:2005
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part 2: Inch-based series 90.93 TC 138/SC 2
ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method 90.20 TC 138/SC 5
ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces 90.20 TC 138/SC 5
ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components 60.60 TC 138/SC 5
ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies 60.60 TC 138/SC 5
ISO/FDIS 1452-1
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General 50.00 TC 138/SC 2
ISO/FDIS 1452-2
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes 50.00 TC 138/SC 2
ISO/FDIS 1452-3
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings 50.00 TC 138/SC 2
ISO/FDIS 1452-4
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves 50.00 TC 138/SC 2
ISO/FDIS 1452-5
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system 50.00 TC 138/SC 2
ISO 2045:1988
Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement 90.93 TC 138/SC 2
ISO 2048:1990
Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints -- Minimum depths of engagement 90.93 TC 138/SC 2
ISO 2507-1:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method 90.93 TC 138/SC 5
ISO 2507-2:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes 90.93 TC 138/SC 5
ISO 2507-3:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings 90.93 TC 138/SC 5
ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density 90.93 TC 138/SC 5
ISO 3603:1977
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints -- Pressure test for leakproofness 90.93 TC 138/SC 2
ISO 4132:1979
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure -- Laying lengths and size of threads -- Metric series 90.93 TC 138/SC 2
ISO 4422-1:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 1: General 90.92 TC 138/SC 2
ISO 4422-2:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 2: Pipes (with or without integral sockets) 90.92 TC 138/SC 2
ISO 4422-3:1996
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 3: Fittings and joints 90.92 TC 138/SC 2
ISO 4422-4:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 4: Valves and ancillary equipment 90.92 TC 138/SC 2
ISO 4422-5:1997
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -- Specifications -- Part 5: Fitness for purpose of the system 90.92 TC 138/SC 2
ISO 4427-1:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General 60.60 TC 138/SC 2
ISO 4427-1:2007/Cor 1:2008
60.60 TC 138/SC 2
ISO 4427-3:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 3: Fittings 60.60 TC 138/SC 2
ISO 4427-5:2007
Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system 60.60 TC 138/SC 2
ISO 4434:1977
Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure -- Laying length and size of threads -- Metric series 90.93 TC 138/SC 2
ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density 90.93 TC 138/SC 5
ISO 6455:1983
Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure -- Dimensions of laying lengths -- Metric series 90.93 TC 138/SC 2
ISO 7245:1984
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials 90.93 TC 138/SC 5
ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials 90.93 TC 138/SC 5
ISO 7279:1984
Polypropylene (PP) fittings for pipes under pressure -- Sockets for fusion using heated tools -- Metric series -- Dimensions of sockets 90.93 TC 138/SC 2
ISO 7432:2002
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals 90.93 TC 138/SC 6
ISO 7510:1997
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method 90.93 TC 138/SC 6
ISO 7511:1999
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure 90.93 TC 138/SC 6
ISO 7686:2005
Plastics pipes and fittings -- Determination of opacity 90.93 TC 138/SC 5
ISO 8283-1:1991
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) 90.93 TC 138/SC 1
ISO 8283-2:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE) 90.93 TC 138/SC 1
ISO 8283-3:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP) 90.93 TC 138/SC 1
ISO 8283-4:1992
Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS) 90.93 TC 138/SC 1
ISO 8361-1:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method 90.93 TC 138/SC 5
ISO 8361-2:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings 90.60 TC 138/SC 5
ISO 8361-3:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings 90.93 TC 138/SC 5
ISO 8483:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints 90.60 TC 138/SC 6
ISO 8533:2003
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped joints 90.60 TC 138/SC 6
ISO 8772:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE) 60.60 TC 138/SC 1
ISO 8773:2006
Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP) 60.60 TC 138/SC 1
ISO 9623:1997
PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure -- Design lengths and size of threads -- Metric series 90.93 TC 138/SC 2
ISO 9625:1993
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes 95.20 TC 138/SC 2
ISO 9853:1991
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test 90.93 TC 138/SC 5
ISO 10147:2004
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content 90.93 TC 138/SC 5
ISO 10147:2004/Amd 1:2008
60.60 TC 138/SC 5
ISO/TR 10358:1993
Plastics pipes and fittings -- Combined chemical-resistance classification table 90.93 TC 138/SC 3
ISO 10508:2006
Plastics piping systems for hot and cold water installations -- Guidance for classification and design 90.20 TC 138/SC 2
ISO 10928:1997
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use 90.92 TC 138/SC 6
ISO/FDIS 10928
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use 50.00 TC 138/SC 6
ISO 10952:2008
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition 60.60 TC 138/SC 6
ISO/CD 10986
Plasitcs piping systems for pressure and non-pressure applications -- Installation of pipes above ground -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin 30.60 TC 138/SC 6
ISO/FDIS 11296-1
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General 50.00 TC 138
ISO/FDIS 11296-3
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes 50.00 TC 138
ISO/FDIS 11296-4
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-places pipes 50.00 TC 138
ISO/DIS 11298-1
Plastics piping systems for renovation of underground water supply networks -- Part 1: General 40.99 TC 138
ISO/DIS 11298-3
Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit-pipes 40.99 TC 138
ISO/NP 11299-1
Plastics piping systems for renovation of underground gas supply networks -- Part 1: General 10.99 TC 138
ISO/NP 11299-3
Plastics piping systems for renovation of underground gas supply networks -- Part 3: Limning with close-fit pipes 10.99 TC 138
ISO 12162:1995
Thermoplastics materials for pipes and fittings for pressure applications -- Classification and designation -- Overall service (design) coefficient 90.92 TC 138/SC 5
ISO/FDIS 12162
Thermoplastics materials for pipes and fittings for pressure applications -- Classification, design coefficient, and designation 50.00 TC 138/SC 5
ISO 12176-1:2006
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion 60.60 TC 138/SC 4
ISO 12176-2:2008
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion 60.60 TC 138/SC 4
ISO 12176-3:2006
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge 90.20 TC 138/SC 4
ISO 12176-4:2003
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding 90.60 TC 138/SC 4
ISO/NP 13147
Plastics pipes and fittings ? Slow peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 50 mm 10.99 TC 138/SC 5
ISO/DIS 13260
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading 40.20 TC 138/SC 1
ISO/DIS 13262
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam 40.20 TC 138/SC 1
ISO/DIS 13263
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength 40.20 TC 138/SC 1
ISO/DIS 13264
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings 40.20 TC 138/SC 1
ISO/DIS 13265
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure 40.20 TC 138/SC 1
ISO/DIS 13266
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading 40.20 TC 138/SC 1
ISO/DIS 13267
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test method for buckling resistance 40.20 TC 138/SC 1
ISO/DIS 13268
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness 40.20 TC 138/SC 1
ISO/DIS 13272
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations 40.20 TC 138/SC 1
ISO 13761:1996
Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C 90.93 TC 138/SC 5
ISO 13924:2000
Plastics pipes and fittings -- Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles 90.93 TC 138/SC 5
ISO 13950:2007
Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints 60.60 TC 138/SC 4
ISO 13950:2007/Cor 1:2008
60.60 TC 138/SC 4
ISO 13957:1997
Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance 90.93 TC 138/SC 5
ISO 13966:1998
Thermoplastics pipes and fittings -- Nominal ring stiffnesses 90.93 TC 138
ISO 13967:1998
Thermoplastics fittings -- Determination of ring stiffness 90.92 TC 138/SC 5
ISO/DIS 13967
Thermoplastics fittings -- Determination of ring stiffness 40.99 TC 138/SC 5
ISO 14236:2000
Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems 90.93 TC 138/SC 2
ISO 14531-1:2002
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes 90.93 TC 138/SC 4
ISO 14531-2:2004
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing 90.93 TC 138/SC 4
ISO 14531-3:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) 90.20 TC 138/SC 4
ISO 14531-4:2006
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 4: System design and installation guidelines 90.20 TC 138/SC 4
ISO 15306:2003
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure 90.93 TC 138/SC 6
ISO 15439-1:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 1: General 60.60 TC 138/SC 4
ISO 15439-2:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 2: Pipes 60.60 TC 138/SC 4
ISO 15439-3:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) -- Polyamide (PA) -- Part 3: Fittings 60.60 TC 138/SC 4
ISO 15874-3:2003
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings 90.92 TC 138/SC 2
ISO/NP 15874-3
Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 3: Fittings 10.99 TC 138/SC 2
ISO 15874-3:2003/FDAmd 1
50.20 TC 138/SC 2
ISO 15875-3:2003
Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 3: Fittings 90.93 TC 138/SC 2
ISO 15876-3:2003
Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 3: Fittings 90.93 TC 138/SC 2
ISO 15877-3:2009
Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 3: Fittings 60.60 TC 138/SC 2
ISO 15877-3:2009/CD Amd 1
30.99 TC 138/SC 2
ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) 90.93 TC 138/SC 5
ISO 16422:2006
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications 90.20 TC 138/SC 2
ISO 16871:2003
Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering 90.93 TC 138/SC 5
ISO/TR 16913:1999
Plastics pipes and fittings -- Definitions of types of test 90.20 TC 138/SC 5
ISO 17484-1:2006
Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems 60.60 TC 138/SC 4
ISO 17484-1:2006/Cor 1:2008
60.60 TC 138/SC 4
ISO 17484-2:2009
Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice 60.60 TC 138/SC 4
ISO 18225:2007
Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems 60.60 TC 138/SC 4
ISO/TS 18226:2006
Plastics pipes and fittings -- Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) 60.60 TC 138/SC 4
ISO 18553:2002
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds 90.93 TC 138/SC 5
ISO 18553:2002/Amd 1:2007
60.60 TC 138/SC 5
ISO 18672-1
Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints 60.00 TC 138/SC 6
ISO/TR 19480:2005
Polyethylene pipes and fittings for the supply of gaseous fuels or water -- Training and assessment of fusion operators 60.60 TC 138/SC 4
ISO/CD TS 19911
Plastics pipes and fittings -- Format for a technical file for characterizing PE spigot end fittings 30.99 TC 138/SC 5
ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings -- Part 3: Fittings 60.60 TC 138/SC 2
ISO 21004:2006
Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply 60.60 TC 138/SC 2
ISO 21138-1:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system 60.60 TC 138/SC 1
ISO 21138-2:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A 60.60 TC 138/SC 1
ISO 21138-3:2007
Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B 60.60 TC 138/SC 1
ISO 21307:2009
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems 60.60 TC 138/SC 4
ISO/DIS 21751
Plastics pipes and fittings -- Determination of cohesive resistance -- Strip-bend test for electrofusion assemblies 40.20 TC 138/SC 5
ISO 22391-3:2007
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings 90.92 TC 138/SC 2
ISO/DIS 22391-3
Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings 40.99 TC 138/SC 2
ISO/CD TR 26873
Plastics pipes and fittings -- Definition and construction procedures for reference lines 30.60 TC 138/SC 5
ISO/CD 29561-1
Plastics piping systems -- Glass fibre reinforced polyethylene (PE-GF) piping systems for water supply -- Part 1: General 30.20 TC 138/SC 2

23.040.50 Pipes and fittings of other materials
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 3586:1976
Glass plant, pipeline and fittings -- General rules for testing, handling and use 95.20 TC 128
ISO 3587:1976
Glass plant, pipeline and fittings -- Pipeline and fittings of nominal bore 15 to 150 mm -- Compatibility and interchangeability 95.20 TC 128
ISO 4704:1977
Glass plant, pipeline and fittings -- Glass plant components 95.20 TC 128

23.040.60 Flanges, couplings and joints
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 2536:1974
Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series -- Dimensions of flanges 95.20 TC 138/SC 2
ISO 3458:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of leakproofness under internal pressure 90.93 TC 138/SC 2
ISO 3459:1976
Polyethylene (PE) pressure pipes -- Joints assembled with mechanical fittings -- Internal under-pressure test method and requirement 90.93 TC 138/SC 2
ISO 3460:1975
Unplasticized polyvinyl chloride (PVC) pressures pipes -- Metric series -- Dimensions of adapter for backing flange 90.93 TC 138/SC 2
ISO 3501:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of resistance to pull out 90.93 TC 138/SC 2
ISO 3503:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes -- Test of leakproofness under internal pressure when subjected to bending 90.93 TC 138/SC 2
ISO 7005-1:1992
Metallic flanges -- Part 1: Steel flanges 90.92 TC 5/SC 10
ISO/FDIS 7005-1
Pipe flanges -- Part 1: Steel flanges for industrial and general service piping systems 50.92 TC 5/SC 10
ISO 7005-2:1988
Metallic flanges -- Part 2: Cast iron flanges 90.92 TC 5/SC 10
ISO 7005-3:1988
Metallic flanges -- Part 3: Copper alloy and composite flanges 90.92 TC 5/SC 10
ISO 8639:2000
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods for leaktightness of flexible joints 90.93 TC 138/SC 6
ISO/FDIS 9624
Thermoplastics pipes for fluids under pressure -- Mating dimensions of flange adapters and loose backing flanges 50.00 TC 138/SC 2
ISO 9624:1997
Thermoplastics pipes for fluids under pressure -- Mating dimensions of flange adapters and loose backing flanges 90.92 TC 138/SC 2
ISO 11413:2008
Plastics pipes and fittings -- Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting 60.60 TC 138/SC 5
ISO 11414:2009
Plastics pipes and fittings -- Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion 60.60 TC 138/SC 5
ISO 13783:1997
Plastics piping systems -- Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints -- Test method for leaktightness and strength while subjected to bending and internal pressure 90.93 TC 138/SC 2
ISO 13846:2000
Plastics piping systems -- End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping -- Test method for long-term leaktightness under internal water pressure 90.93 TC 138/SC 2
ISO 13953:2001
Polyethylene (PE) pipes and fittings -- Determination of the tensile strength and failure mode of test pieces from a butt-fused joint 90.93 TC 138/SC 5
ISO 13954:1997
Plastics pipes and fittings -- Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm 90.93 TC 138/SC 5
ISO 13955:1997
Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies 90.93 TC 138/SC 5
ISO/CD 13956
Plastics pipes and fittings -- Determination of cohesive resistance -- Tear test for polyethylene (PE) saddle assemblies 30.99 TC 138/SC 5
ISO 19879:2005
Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections 90.60 TC 131/SC 4
ISO 19879:2005/Cor 1:2007
60.60 TC 131/SC 4
ISO/DIS 19899.2
Plastics piping systems -- Polyolefin pipes and mechanical fitting assemblies -- Test method for the resistance to end load (AREL test) 40.60 TC 138/SC 5
ISO/CD TS 19911
Plastics pipes and fittings -- Format for a technical file for characterizing PE spigot end fittings 30.99 TC 138/SC 5
ISO/AWI 27509
Petroleum and natural gas industries -- Compact flanged connections 20.00 TC 67/SC 6

23.040.70 Hoses and hose assemblies
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 1307:2006
Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses 90.20 TC 45/SC 1
ISO 1402:1994
Rubber and plastics hoses and hose assemblies -- Hydrostatic testing 90.92 TC 45/SC 1
ISO/FDIS 1402
Rubber and plastics hoses and hose assemblies -- Hydrostatic testing 50.00 TC 45/SC 1
ISO 1403:2005
Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification 90.93 TC 45/SC 1
ISO 1746:1998
Rubber or plastics hoses and tubing -- Bending tests 90.93 TC 45/SC 1
ISO 1746:1998/Cor 1:1999
60.60 TC 45/SC 1
ISO 2398:2006
Rubber hoses, textile-reinforced, for compressed air -- Specification 90.20 TC 45/SC 1
ISO 3994:2007
Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials -- Specification 60.60 TC 45/SC 1
ISO 4023:1991
Rubber hoses for steam -- Test methods 90.92 TC 45/SC 1
ISO/FDIS 4023
Rubber hoses and hose assemblies for steam -- Test methods 50.00 TC 45/SC 1
ISO 4080:1991
Rubber and plastics hoses and hose assemblies -- Determination of permeability to gas 90.92 TC 45/SC 1
ISO/FDIS 4080
Rubber and plastics hoses and hose assemblies -- Determination of permeability to gas 50.00 TC 45/SC 1
ISO 4080:1991/Cor 2:1998
60.60 TC 45/SC 1
ISO/DIS 4641
Rubber hoses and hose assemblies for water suction and discharge -- Specification 40.20 TC 45/SC 1
ISO 4641:2005
Rubber hoses and hose assemblies for water suction and discharge -- Specification 90.92 TC 45/SC 1
ISO 4671:2007
Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies 60.60 TC 45/SC 1
ISO 4672:1997
Rubber and plastics hoses -- Sub-ambient temperature flexibility tests 90.92 TC 45/SC 1
ISO 5774:2006
Plastics hoses -- Textile-reinforced types for compressed-air applications -- Specification 90.20 TC 45/SC 1
ISO 6134:2005
Rubber hoses and hose assemblies for saturated steam -- Specification 90.93 TC 45/SC 1
ISO 6224:2005
Thermoplastics hoses, textile-reinforced, for general-purpose water applications -- Specification 90.92 TC 45/SC 1
ISO/DIS 6224
Thermoplastics hoses, textile-reinforced, for general-purpose water applications -- Specification 40.20 TC 45/SC 1
ISO 6801:1983
Rubber or plastics hoses -- Determination of volumetric expansion 90.20 TC 45/SC 1
ISO 6802:2005
Rubber and plastics hoses and hose assemblies with wire reinforcements -- Hydraulic impulse test with flexing 90.93 TC 45/SC 1
ISO 6803:2008
Rubber or plastics hoses and hose assemblies -- Hydraulic-pressure impulse test without flexing 60.60 TC 45/SC 1
ISO 6945:1991
Rubber hoses -- Determination of abrasion resistance of the outer cover 90.93 TC 45/SC 1
ISO 6945:1991/Amd 1:1998
90.93 TC 45/SC 1
ISO 7233:2006
Rubber and plastics hoses and hose assemblies -- Determination of resistance to vacuum 90.20 TC 45/SC 1
ISO 7326:2006
Rubber and plastics hoses -- Assessment of ozone resistance under static conditions 90.20 TC 45/SC 1
ISO 7369:2004
Pipework -- Metal hoses and hose assemblies -- Vocabulary 90.93 TC 5/SC 11
ISO 7662:1988
Rubber and plastics hoses -- Determination of abrasion of lining 90.20 TC 45/SC 1
ISO 7751:1991
Rubber and plastics hoses and hose assemblies -- Ratios of proof and burst pressure to design working pressure 90.20 TC 45/SC 1
ISO 8029:2007
Plastics hose -- General-purpose collapsible water hose, textile-reinforced -- Specification 60.60 TC 45/SC 1
ISO 8030:1995
Rubber and plastics hoses -- Method of test for flammability 90.93 TC 45/SC 1
ISO 8031:1993
Rubber and plastics hoses and hose assemblies -- Determination of electrical resistance 90.92 TC 45/SC 1
ISO/FDIS 8031
Rubber and plastics hoses and hose assemblies -- Determination of electrical resistance and conductivity 50.00 TC 45/SC 1
ISO 8032:1997
Rubber and plastics hose assemblies -- Flexing combined with hydraulic impulse test (half-omega test) 90.93 TC 45/SC 1
ISO 8033:2006
Rubber and plastics hoses -- Determination of adhesion between components 90.20 TC 45/SC 1
ISO 8308:2006
Rubber and plastics hoses and tubing -- Determination of transmission of liquids through hose and tubing walls 90.20 TC 45/SC 1
ISO 8330:2007
Rubber and plastics hoses and hose assemblies -- Vocabulary 60.60 TC 45/SC 1
ISO 8331:2007
Rubber and plastics hoses and hose assemblies -- Guidelines for selection, storage, use and maintenance 60.60 TC 45/SC 1
ISO 8580:1987
Rubber and plastics hoses -- Determination of ultra-violet resistance under static conditions 90.92 TC 45/SC 1
ISO 10380:2003
Pipework -- Corrugated metal hoses and hose assemblies 90.92 TC 5/SC 11
ISO/NP 10380
Pipework -- Corrugated metal hoses and hose assemblies 10.99 TC 5/SC 11
ISO/DIS 10619-1
Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperature 40.20 TC 45/SC 1
ISO/DIS 10619-2
Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 2: Bending tests at sub-ambient temperatures 40.20 TC 45/SC 1
ISO/DIS 10619-3
Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 3: Bending tests at high and low temperatures 40.20 TC 45/SC 1
ISO 10806:2003
Pipework -- Fittings for corrugated metal hoses 90.93 TC 5/SC 11
ISO 10960:1994
Rubber and plastics hoses -- Assessment of ozone resistance under dynamic conditions 90.93 TC 45/SC 1
ISO 11758:1995
Rubber and plastics hoses -- Exposure to a xenon arc lamp -- Determination of changes in colour and appearance 90.92 TC 45/SC 1
ISO 11758:1995/Cor 1:1998
60.60 TC 45/SC 1
ISO 12151-1:1999
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends 90.92 TC 131/SC 4
ISO/DIS 12151-1
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends 40.60 TC 131/SC 4
ISO 12151-2:2003
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings 90.60 TC 131/SC 4
ISO 12151-3:1999
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 3: Hose fittings with ISO 6162 flange ends 90.92 TC 131/SC 4
ISO/DIS 12151-3
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends 40.60 TC 131/SC 4
ISO 12151-4:2007
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 4: Hose fittings with ISO 6149 metric stud ends 60.60 TC 131/SC 4
ISO 12151-5:2007
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 5: Hose fittings with ISO 8434-2 37 degree flared ends 60.60 TC 131/SC 4
ISO/FDIS 12151-6
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 6: Hose fittings with ISO 8434-6 60 degree cone ends 50.20 TC 131/SC 4
ISO 15348:2002
Pipework -- Metal bellows expansion joints -- General 90.60 TC 5/SC 11
ISO 15465:2004
Pipework -- Stripwound metal hoses and hose assemblies 90.93 TC 5/SC 11
ISO 17165-1:2007
Hydraulic fluid power -- Hose assemblies -- Part 1: Dimensions and requirements 60.60 TC 131/SC 4
ISO/TR 17165-2:2006
Hydraulic fluid power -- Hose assemblies -- Part 2: Recommended practices for hydraulic hose assemblies 60.60 TC 131/SC 4
ISO/TR 17784:2003
Rubber and plastics hoses and hose assemblies -- Guide for use by purchasers, assemblers, installers and operating personnel 90.93 TC 45/SC 1
ISO/AWI 18409
Hydraulic fluid power -- Hose and hose assemblies -- Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly 20.00 TC 131/SC 4
ISO 18752:2006
Rubber hoses and hose assemblies -- Wire- or textile-reinforced single-pressure types for hydraulic applications -- Specification 90.20 TC 45/SC 1
ISO 28702:2008
Rubber and plastics hoses and tubing -- Textile-reinforced types -- Sub-ambient temperature crush test 60.60 TC 45/SC 1
ISO/DIS 30013
Rubber and plastics hoses -- Methods of exposure to laboratory light sources -- Determination of changes in colour, appearance and other physical properties 40.20 TC 45/SC 1

23.040.80 Seals for pipe and hose assemblies
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 7483:1991
Dimensions of gaskets for use with flanges to ISO 7005 90.93 TC 5/SC 10
ISO 7483:1991/Cor 1:1995
60.60 TC 5/SC 10
ISO 9691:1992
Rubber -- Recommendations for the workmanship of pipe joint rings -- Description and classification of imperfections 90.93 TC 45/SC 4


23.040.99 Other pipeline components

23.060 Valves
ICS Field
23.060.01 Valves in general
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 5208:2008
Industrial valves -- Pressure testing of metallic valves 90.92 TC 153/SC 1
ISO 5209:1977
General purpose industrial valves -- Marking 90.93 TC 153/SC 1
ISO 5210:1991
Industrial valves -- Multi-turn valve actuator attachments 90.60 TC 153/SC 2
ISO 5211:2001
Industrial valves -- Part-turn actuator attachments 90.60 TC 153/SC 2
ISO 5752:1982
Metal valves for use in flanged pipe systems -- Face-to-face and centre-to-face dimensions 90.93 TC 153/SC 1
ISO 6552:1980
Automatic steam traps -- Definition of technical terms 90.93 TC 153
ISO 6552:1980/CD Cor 1
30.99 TC 153
ISO 6553:1980
Automatic steam traps -- Marking 90.93 TC 153
ISO 6554:1980
Flanged automatic steam traps -- Face-to-face dimensions 90.93 TC 153
ISO 6704:1982
Automatic steam traps -- Classification 90.93 TC 153
ISO 6948:1981
Automatic steam traps -- Production and performance characteristic tests 90.93 TC 153
ISO 7841:1988
Automatic steam traps -- Determination of steam loss -- Test methods 90.93 TC 153
ISO 7842:1988
Automatic steam traps -- Determination of discharge capacity -- Test methods 90.93 TC 153
ISO 8233:1988
Thermoplastics valves -- Torque -- Test method 90.93 TC 138/SC 7
ISO 8659:1989
Thermoplastics valves -- Fatigue strength -- Test method 90.93 TC 138/SC 7
ISO 9393-1:2004
Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General 90.93 TC 138/SC 7
ISO 9393-2:2005
Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements 90.93 TC 138/SC 7
ISO 10497:2004
Testing of valves -- Fire type-testing requirements 90.92 TC 153/SC 1
ISO/DIS 10497
Testing of valves -- Fire type-testing requirements 40.60 TC 153/SC 1
ISO 14617-8:2002
Graphical symbols for diagrams -- Part 8: Valves and dampers 90.60 TC 10/SC 10
ISO 15848-1:2006
Industrial valves -- Measurement, test and qualification procedures for fugitive emissions -- Part 1: Classification system and qualification procedures for type testing of valves 90.60 TC 153/SC 1
ISO 15848-2:2006
Industrial valves -- Measurement, test and qualification procedures for fugitive emissions -- Part 2: Production acceptance test of valves 90.60 TC 153/SC 1
ISO 22434:2006
Transportable gas cylinders -- Inspection and maintenance of cylinder valves 60.60 TC 58/SC 2

23.060.10 Globe valves
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 12149:1999
Bolted bonnet steel globe valves for general-purpose applications 90.60 TC 153/SC 1
ISO 21787:2006
Industrial valves -- Globe valves of thermoplastics materials 90.20 TC 138/SC 7

23.060.20 Ball and plug valves
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 7121:2006
Steel ball valves for general-purpose industrial applications 90.93 TC 153/SC 1
ISO 16135:2006
Industrial valves -- Ball valves of thermoplastics materials 90.20 TC 138/SC 7
ISO 17292:2004
Metal ball valves for petroleum, petrochemical and allied industries 90.93 TC 153/SC 1

23.060.30 Gate valves
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 5996:1984
Cast iron gate valves 90.60 TC 153/SC 1
ISO 6002:1992
Bolted bonnet steel gate valves 90.93 TC 153/SC 1
ISO 7259:1988
Predominantly key-operated cast iron gate valves for underground use 90.60 TC 153/SC 1
ISO 16139:2006
Industrial valves -- Gate valves of thermoplastics materials 90.20 TC 138/SC 7

23.060.40 Pressure regulators
Including pressure-reducers
Protection against excessive pressure, see 13.240
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 10297:2006
Transportable gas cylinders -- Cylinder valves -- Specification and type testing 90.92 TC 58/SC 2
ISO/DIS 28622
Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG) 40.60 TC 58/SC 2

23.060.50 Check valves
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 16137:2006
Industrial valves -- Check valves of thermoplastics materials 90.20 TC 138/SC 7

23.060.99 Other valves
Standards and projects under the direct responsibility of Secretariat
Standard and/or project TC
ISO 10631:1994
Metallic butterfly valves for general purposes 90.60 TC 153/SC 1
ISO 16136:2006
Industrial valves -- Butterfly valves of thermoplastics materials 90.20 TC 138/SC 7
ISO 16138:2006
Industrial valves -- Diaphragm valves of thermoplastics materials 90.20 TC 138/SC 7


23.080 Pumps
Pumps for fluid power systems, see 23.100.10
Vacuum pumps, see 23.160
23.100 Fluid power systems
23.120 Ventilators. Fans. Air-conditioners
Marine ventilation and air-conditioning systems, see 47.020.90
Mining ventilation and air-conditioning systems, see 73.100.20
Ventilation and air-conditioning in buildings, see 91.140.30
23.140 Compressors and pneumatic machines
Compressed air, see 71.100.20
23.160 Vacuum technology
Including vacuum pumps






http://www.int-bizdirectory.com/standards.htm http://www.int-bizdirectory.com.